- 24 Apr, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm fixes from David Teigland: "This includes one short patch fixing the behavior of the QUECVT flag, which the gfs2 folks are waiting on." * tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix QUECVT when convert queue is empty
-
Hugh Dickins authored
Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390 3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap() tries to transfer dirty flag from s390 storage key to struct page and radix_tree. That would be because of reclaim's shrink_page_list() calling add_to_swap() on this page at the same time: first PageSwapCache is set (causing page_mapping(page) to appear as &swapper_space), then page->private set, then tree_lock taken, then page inserted into radix_tree - so there's an interval before taking the lock when the radix_tree slot is empty. We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up before the SetPageSwapCache. But a better fix is simply to do what's five years overdue: Ken Chen introduced __set_page_dirty_no_writeback() (if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree overhead, and swap is just the same - it ignores the radix_tree tag, and does not participate in dirty page accounting, so should be using __set_page_dirty_no_writeback() too. s390 testing now confirms that this does indeed fix the problem. Reported-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ken Chen <kenchen@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Apr, 2012 10 commits
-
-
David Teigland authored
The QUECVT flag should not prevent conversions from being granted immediately when the convert queue is empty. Signed-off-by:
David Teigland <teigland@redhat.com>
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Here's my usual Sunday push, just for one revert which PeterZ hollered about after last weeks push. Other than that, all seems strangely quiet as far as fixes go in non-platform ARM land at the moment." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus"
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few fixes for powerpc. Note the addition to the generic irq.h. This is part of a 3-patches regression fix for mpic due to changes in how IRQ_TYPE_NONE is being handled. Thomas agreed to the addition of the new IRQ_TYPE_DEFAULT contant, however he hasn't replied with an Ack to the actual patch yet. I don't to wait much longer with these patches tho." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mpic: Properly set default triggers irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers powerpc/mpic: Fix confusion between hw_irq and virq powerpc/pmac: Don't add_timer() twice powerpc/eeh: Fix crash caused by null eeh_dev powerpc/mpc85xx: add MPIC message dts node powerpc/mpic_msgr: fix offset error when setting mer register powerpc/mpic_msgr: add lock for MPIC message global variable powerpc/mpic_msgr: fix compile error when SMP disabled powerpc: fix build when CONFIG_BOOKE_WDT is enabled powerpc/85xx: don't call of_platform_bus_probe() twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix namespace init and cleanup in phonet to fix some oopses, from Eric W. Biederman. 2) Missing kfree_skb() in AF_KEY, from Julia Lawall. 3) Refcount leak and source address handling fix in l2tp from James Chapman. 4) Memory leak fix in CAIF from Tomasz Gregorek. 5) When routes are cloned from ipv6 addrconf routes, we don't process expirations properly. Fix from Gao Feng. 6) Fix panic on DMA errors in atl1 driver, from Tony Zelenoff. 7) Only enable interrupts in 8139cp driver after we've registered the IRQ handler. From Jason Wang. 8) Fix too many reads of KS_CIDER register in ks8851 during probe, fixing crashes on spurious interrupts. From Matt Renzelmann. 9) Missing include in ath5k driver and missing iounmap on probe failure, from Jonathan Bither. 10) Fix RX packet handling in smsc911x driver, from Will Deacon. 11) Fix ixgbe WoL on fiber by leaving the laser on during shutdown. 12) ks8851 needs MAX_RECV_FRAMES increased otherwise the internal MAC buffers are easily overflown. Fix from Davide Cimingahi. 13) Fix memory leaks in peak_usb CAN driver, from Jesper Juhl. 14) gred packet scheduler can dump in WRED more when doing a netlink dump. Fix from David Ward. 15) Fix MTU in USB smsc75xx driver, from Stephane Fillod. 16) Dummy device needs ->ndo_uninit handler to properly handle ->ndo_init failures. From Hiroaki SHIMODA. 17) Fix TX fragmentation in ath9k driver, from Sujith Manoharan. 18) Missing RTNL lock in ixgbe PM resume, from Benjamin Poirier. 19) Missing iounmap in farsync WAN driver, from Julia Lawall. 20) With LRO/GRO, tcp_grow_window() is easily tricked into not growing the receive window properly, and this hurts performance. Fix from Eric Dumazet. 21) Network namespace init failure can leak net_generic data, fix from Julian Anastasov. 22) Fix skb_over_panic due to mis-accounting in TCP for partially ACK'd SKBs. From Eric Dumazet. 23) New IDs for qmi_wwan driver, from Bjørn Mork. 24) Fix races in ax25_exit(), from Eric W. Biederman. 25) IPV6 TCP doesn't handle TCP_MAXSEG socket option properly, copy over logic from the IPV4 side. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: fix TCP_MAXSEG for established IPv6 passive sockets drivers/net: Do not free an IRQ if its request failed drop_monitor: allow more events per second ks8851: Fix request_irq/free_irq mismatch net/hyperv: Adding cancellation to ensure rndis filter is closed ks8851: Fix mutex deadlock in ks8851_net_stop() net ax25: Reorder ax25_exit to remove races. icplus: fix interrupt for IC+ 101A/G and 1001LF net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() ksz884x: don't copy too much in netdev_set_mac_address() tcp: fix retransmit of partially acked frames netns: do not leak net_generic data on failed init net/sock.h: fix sk_peek_off kernel-doc warning tcp: fix tcp_grow_window() for large incoming frames drivers/net/wan/farsync.c: add missing iounmap davinci_mdio: Fix MDIO timeout check ipv6: clean up rt6_clean_expires ipv6: fix rt6_update_expires arcnet: rimi: Fix device name in debug output ...
-
Benjamin Herrenschmidt authored
This gets rid of the unused default senses array, and replaces the incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for the initial set_trigger() call when mapping an interrupt. This in turn makes us read the HW state and update the irq desc accordingly. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
This is meant typically to allow a PIC driver's irq domain map() callback to establish sane defaults for the interrupt (and make sure that the HW and the irq_desc are in sync as far as the trigger is concerned). The irq core may not call the set_trigger callback if it thinks the trigger is already set to the right setting, so we need to ensure new descriptors are properly synchronized with the hardware. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
mpic_is_ipi() takes a virq and immediately converts it to a hw_irq. However, one of the two call sites calls it with a ... hw_irq. The other call site also happens to have the hw_irq at hand, so let's change it to just take that as an argument. Also change mpic_is_tm() for consistency. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
If the interrupt and the timeout happen roughly at the same time, we can get into a situation where the timer function is run while the interrupt has already been processed. In this case, the timer function might end up doing an add_timer on an already pending timer, causing a BUG_ON() to trigger. Instead, just skip the whole timeout operation if we see that the timer is pending. The spinlock ensures that the only way that happens is if we already started a new operation and thus the timeout can be ignored. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
The problem was reported by Anton Blanchard. While EEH error happened to the PCI device without the corresponding device driver, kernel crash was seen. Eventually, I successfully reproduced the problem on Firebird-L machine with utility "errinjct". Initially, the device driver for Emulex ethernet MAC has been disabled from .config and force data parity on the Emulex ethernet MAC with help of "errinjct". Eventually, I saw the kernel crash after issueing couple of "lspci -v" command. The root cause behind is that the PCI device, including the reference to the corresponding eeh device, will be removed from the system while EEH does recovery. Afterwards, the PCI device will be probed again and added into the system accordingly. So it's not safe to retrieve the eeh device from the corresponding PCI device after the PCI device has been removed and not added again. The patch fixes the issue and retrieve the eeh device from OF node instead of PCI device after the PCI device has been removed. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Tested-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
-
- 22 Apr, 2012 1 commit
-
-
Neal Cardwell authored
Commit f5fff5dc forgot to fix TCP_MAXSEG behavior IPv6 sockets, so IPv6 TCP server sockets that used TCP_MAXSEG would find that the advmss of child sockets would be incorrect. This commit mirrors the advmss logic from tcp_v4_syn_recv_sock in tcp_v6_syn_recv_sock. Eventually this logic should probably be shared between IPv4 and IPv6, but this at least fixes this issue. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Apr, 2012 27 commits
-
-
Linus Torvalds authored
-
Lee Jones authored
Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yong Zhang authored
Otherwise cpu_active_mask will not set, which lead to other issue. Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Signed-off-by:
Konrad Eisele <konrad@gaisler.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
It seems there is a logic error in trace_drop_common(), since we store only 64 drops, even if they are from same location. This fix is a one liner, but we probably need more work to avoid useless atomic dec/inc Now I can watch 1 Mpps drops through dropwatch... Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matt Renzelmann authored
The dev_id parameter passed to free_irq needs to match the one passed to the corresponding request_irq. Signed-off-by:
Matt Renzelmann <mjr@cs.wisc.edu> Acked-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull "ARM: SoC fixes" from Olof Johansson: * at91, ux500, imx, omap and bcmring: - at91 fixes for =m driver build issues, irqdomain fixes and config dependency fixes - ux500 kconfig dependency fixes and a smp wakeup bugfix - imx idle bugfix and build fix due to irq domain changes - omap uart pinmux fixes, softreset regression revert and misc fixes - bcmring build error regression fix * ux500 and imx had some small defconfig updates in this branch * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: bcmring: fix UART declarations ARM: imx: Fix imx5 idle logic bug ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple() ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE ARM: OMAP1: DMTIMER: fix broken timer clock source selection ARM: OMAP: serial: Fix the ocp smart idlemode handling bug ARM: OMAP2+: UART: Fix incorrect population of default uart pads ARM: OMAP: sram: fix BUG in dpll code for !PM case dmaengine: Kconfig: fix Atmel at_hdmac entry USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt USB: ohci-at91: change annotations for probe/remove functions leds-atmel-pwm.c: Make pwmled_probe() __devinit ARM: at91: fix at91sam9261ek Ethernet dm9000 irq ARM: at91: fix rm9200ek flash size ARM: at91: remove empty at91_init_serial function ARM: at91: fix typo in at91_pmc_base assembly declaration ARM: at91: Export at91_matrix_base ARM: at91: Export at91_pmc_base ARM: at91: Export at91_ramc_base ARM: at91: Export at91_st_base ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC fixes from Chris Ball: - Build fix for omap_hsmmc with OF against 3.4-rc1. - Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3, which broke hotplug card detection when UNSAFE_RESUME is set. - Fix a race condition in omap_hsmmc with runtime PM. - Fix two libertas SDIO-powered-resume regressions. - Small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx. * tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Do not pre-claim host in suspend mmc: dw_mmc: prevent NULL dereference for dma_ops mmc: unbreak sdhci-esdhc-imx on i.MX25 mmc: cd-gpio: Include header to pickup exported symbol prototypes mmc: sdhci: refine non-removable card checking for card detection mmc: dw_mmc: Fix switch from DMA to PIO mmc: remove MMC bus legacy suspend/resume method mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m mmc: fixes for eMMC v4.5 sanitize operation mmc: fixes for eMMC v4.5 discard operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on Kaffeine (Fedora 16 Bugzilla #812895); - Fixes a mutex unlock at an error condition at drx-k; - Fix winbond-cir set mode; - mt9m032: Fix a compilation breakage with some random Kconfig; - mt9m032: fix two dead locks; - xc5000: don't require an special firmware (that won't be provided by the vendor) just because the xtal frequency is different; - V4L DocBook: fix some typos at multi-plane formats description. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware [media] V4L: mt9m032: fix compilation breakage [media] V4L: DocBook: Fix typos in the multi-plane formats description [media] V4L: mt9m032: fix two dead-locks [media] rc-core: set mode for winbond-cir [media] drxk: Does not unlock mutex if sanity check failed in scu_command() [media] dvb_frontend: Fix a regression when switching back to DVB-S
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
Pull MFD fixes from Samuel Ortiz: "We have 3 build fixes, a OMAP USB host PHY reset fix and the twl6040 conversion to an i2c driver. The latter may not sound like a fix but the twl6040 MFD driver won't probe without it, triggering an OMAP4 audio regression." * tag 'mfd-for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix modular builds of rc5t583 regulator support mfd: Fix asic3_gpio_to_irq ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue mfd: Convert twl6040 to i2c driver, and separate it from twl core mfd : Fix dbx500 compilation error
-
Wenqi Ma authored
Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by:
Wenqi Ma <wenqi_ma@trendmicro.com.cn> Reviewed-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
There is a potential deadlock scenario when the ks8851 driver is removed. The interrupt handler schedules a workqueue which acquires a mutex that ks8851_net_stop() also acquires before flushing the workqueue. Previously lockdep wouldn't be able to find this problem but now that it has the support we can trigger this lockdep warning by rmmoding the driver after an ifconfig up. Fix the possible deadlock by disabling the interrupts in the chip and then release the lock across the workqueue flushing. The mutex is only there to proect the registers anyway so this should be ok. ======================================================= [ INFO: possible circular locking dependency detected ] 3.0.21-00021-g8b33780-dirty #2911 ------------------------------------------------------- rmmod/125 is trying to acquire lock: ((&ks->irq_work)){+.+...}, at: [<c019e0b8>] flush_work+0x0/0xac but task is already holding lock: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ks->lock){+.+...}: [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c083dbec>] mutex_lock_nested+0x68/0x3dc [<bf00bd48>] ks8851_irq_work+0x24/0x46c [ks8851] [<c019c580>] process_one_work+0x2d8/0x518 [<c019cb98>] worker_thread+0x220/0x3a0 [<c01a2ad4>] kthread+0x88/0x94 [<c0107008>] kernel_thread_exit+0x0/0x8 -> #0 ((&ks->irq_work)){+.+...}: [<c01b7984>] validate_chain+0x914/0x1018 [<c01b89c8>] __lock_acquire+0x940/0x9f8 [<c01b9058>] lock_acquire+0x10c/0x130 [<c019e104>] flush_work+0x4c/0xac [<bf00b858>] ks8851_net_stop+0x6c/0x138 [ks8851] [<c06b209c>] __dev_close_many+0x98/0xcc [<c06b2174>] dev_close_many+0x68/0xd0 [<c06b22ec>] rollback_registered_many+0xcc/0x2b8 [<c06b2554>] rollback_registered+0x28/0x34 [<c06b25b8>] unregister_netdevice_queue+0x58/0x7c [<c06b25f4>] unregister_netdev+0x18/0x20 [<bf00c1f4>] ks8851_remove+0x64/0xb4 [ks8851] [<c049ddf0>] spi_drv_remove+0x18/0x1c [<c0468e98>] __device_release_driver+0x7c/0xbc [<c0468f64>] driver_detach+0x8c/0xb4 [<c0467f00>] bus_remove_driver+0xb8/0xe8 [<c01c1d20>] sys_delete_module+0x1e8/0x27c [<c0105ec0>] ret_fast_syscall+0x0/0x3c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ks->lock); lock((&ks->irq_work)); lock(&ks->lock); lock((&ks->irq_work)); *** DEADLOCK *** 4 locks held by rmmod/125: #0: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f44>] driver_detach+0x6c/0xb4 #1: (&__lockdep_no_validate__){+.+.+.}, at: [<c0468f50>] driver_detach+0x78/0xb4 #2: (rtnl_mutex){+.+.+.}, at: [<c06b25e8>] unregister_netdev+0xc/0x20 #3: (&ks->lock){+.+...}, at: [<bf00b850>] ks8851_net_stop+0x64/0x138 [ks8851] Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Al Viro authored
it's always current->mm Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
pfm_vm_munmap() is simply vm_munmap() and pfm_remove_smpl_mapping() always get current as the first argument. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... since exit_mmap() is coming and it will munmap() everything anyway. In all other cases aio_free_ring() has ctx->mm == current->mm; moreover, all other callers of vm_munmap() have mm == current->mm, so this will allow us to get rid of mm argument of vm_munmap(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Ulf Hansson authored
Since SDIO drivers may want to do some SDIO operations in their suspend callback functions, we must not keep the host claimed when calling them. Daniel Drake reported that libertas_sdio encountered a deadlock in its suspend function. Signed-off-by:
Ulf Hansson <ulf.hansson@stericsson.com> Tested-by:
Daniel Drake <dsd@laptop.org> [stable@: please apply to 3.2-stable and 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Jaehoon Chung authored
Now, dma_ops is assumed that use the IDMAC. But if dma_ops is assigned the pdata->dma_ops, we didn't ensure that callback function is defined. If the callback isn't defined, then we should run in PIO mode. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Will Newton <will.newton@imgtec.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Eric Bénard authored
This was broken by me in 37865fe9 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by:
Eric Bénard <eric@eukrea.com> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
H Hartley Sweeten authored
Include the linux/mmc/cd-gpio.h header to pickup the prototypes for the two exported symbols. This quiets the sparse warnings: warning: symbol 'mmc_cd_gpio_request' was not declared. Should it be static? warning: symbol 'mmc_cd_gpio_free' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Venkatraman S <svenkatr@ti.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Daniel Drake authored
Commit c79396c1 ("mmc: sdhci: prevent card detection activity for non-removable cards") disables card detection where the cards are marked as non-removable. This makes sense, but the implementation detail of calling mmc_card_is_removable() causes some problems, because mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root filesystem is stored on SD, but we also have external SD card slots where we want automatic card detection. Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE, which is defined to mean that the card is *really* nonremovable. This could be revisited in future if we find a way to improve CONFIG_MMC_UNSAFE_RESUME semantics. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> [stable@: please apply to 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Seungwon Jeon authored
When dw_mci_pre_dma_transfer returns failure in some reasons, dw_mci_submit_data will prepare to switch the PIO mode from DMA. After switching to PIO mode, DMA(IDMAC in particular) is still enabled. This makes the corruption in handling interrupt and the driver lock-up. Signed-off-by:
Seungwon Jeon <tgih.jun@samsung.com> Acked-by:
Will Newton <will.newton@imgtec.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Chuanxiao Dong authored
MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.htmlSigned-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by:
Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Linus Torvalds authored
This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Like the vm_brk() function, this is the same as "do_munmap()", except it does the VM locking for the caller. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rajendra Nayak authored
of_have_populated_dt() is not expected to be used in drivers but instead only in early platform init code. Drivers on the other hand should rely on dev->of_node or of_match_device(). Besides usage of of_have_populated_dt() also throws up build error as below which was reported by Balaji TK, when omap_hsmmc is built as a module. ERROR: "allnodes" [drivers/mmc/host/omap_hsmmc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 So get rid of all of_have_populated_dt() usage in omap_hsmmc driver and instead use dev->of_node to make the same dicisions as earlier. Signed-off-by:
Rajendra Nayak <rnayak@ti.com> Reported-by:
Benoit Cousson <b-cousson@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Rob Herring <rob.herring@calxeda.com> Reviewed-by:
Balaji T K <balajitk@ti.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Chris Ball authored
Commit 46856a68 ("mmc: omap_hsmmc: Convert hsmmc driver to use device tree") introduced in 3.4-rc1 has a missing semi-colon, causing: drivers/mmc/host/omap_hsmmc.c:1745: error: expected ',' or ';' before 'extern' Reported-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Adrian Hunter authored
eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Adrian Hunter authored
eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-