- 02 Dec, 2016 16 commits
-
-
Sowmini Varadhan authored
If some error is encountered in rds_tcp_init_net, make sure to unregister_netdevice_notifier(), else we could trigger a panic later on, when the modprobe from a netns fails. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eli Cooper authored
This reverts commit ae148b08 ("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"). skb->protocol is now set in __ip_local_out() and __ip6_local_out() before dst_output() is called. It is no longer necessary to do it for each tunnel. Cc: stable@vger.kernel.org Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Eli Cooper authored
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called, fixing a bug where GSO packets sent through an ipip6 tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: -
Eli Cooper authored
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IP before dst_output() is called, fixing a bug where GSO packets sent through a sit tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: -
Philip Pettersson authored
When packet_set_ring creates a ring buffer it will initialize a struct timer_list if the packet version is TPACKET_V3. This value can then be raced by a different thread calling setsockopt to set the version to TPACKET_V1 before packet_set_ring has finished. This leads to a use-after-free on a function pointer in the struct timer_list when the socket is closed as the previously initialized timer will not be deleted. The bug is fixed by taking lock_sock(sk) in packet_setsockopt when changing the packet version while also taking the lock at the start of packet_set_ring. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:
Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Lino Sanfilippo authored
The driver already uses its private lock for synchronization between xmit and xmit completion handler making the additional use of the xmit_lock unnecessary. Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be called with the xmit_lock held and then taking the private lock while xmit completion handler does the reverse, first take the private lock, then the xmit_lock. Fix these issues by not taking the xmit_lock in the tx completion handler. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by:
-
Lino Sanfilippo authored
An explicit dma sync for device directly after mapping as well as an explicit dma sync for cpu directly before unmapping is unnecessary and costly on the hotpath. So remove these calls. Signed-off-by:
-
David S. Miller authored
Johan Hovold says: ==================== net: stmmac: fix probe error handling and phydev leaks This series fixes a number of issues with the stmmac-driver probe error handling, which for example left clocks enabled after probe failures. The final patch fixes a failure to deregister and free any fixed-link PHYs that were registered during probe on probe errors and on driver unbind. It also fixes a related of-node leak on late probe errors. This series depends on the of_phy_deregister_fixed_link() helper that was just merged to net. As mentioned earlier, one staging driver also suffers from a similar leak and can be fixed up once the above mentioned helper hits mainline. Note that these patches have only been compile tested. ==================== Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Johan Hovold authored
Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by adding a new glue helper function. Drop the of-node reference taken in the same path also on late probe errors (and not just on driver unbind) by moving the put from stmmac_dvr_remove() to the new helper. Fixes: 27732381 ("stmmac: add fixed-link device-tree support") Fixes: 4613b279 ("ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Johan Hovold authored
Fix the OF-helper function header to reflect that the function no longer has a platform-data parameter. Fixes: b0003ead ("stmmac: make stmmac_probe_config_dt return the platform data struct") Signed-off-by:
-
Johan Hovold authored
Make sure to disable clocks before returning on late probe errors. Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Johan Hovold authored
Make sure to call any exit() callback to undo the effect of init() before returning on late probe errors. Fixes: cf3f047b ("stmmac: move hw init in the probe (v2)") Signed-off-by:
-
Johan Hovold authored
Make sure to disable runtime PM, power down the PHY, and disable clocks before returning on late probe errors. Fixes: 27ffefd2 ("stmmac: dwmac-rk: create a new probe function") Signed-off-by:
-
Johan Hovold authored
Make sure to disable clocks before returning on late probe errors. Fixes: 8387ee21 ("stmmac: dwmac-sti: turn setup callback into a probe function") Signed-off-by:
-
Johan Hovold authored
Make sure to call stmmac_dvr_remove() before returning on late probe errors so that memory is freed, clocks are disabled, and the netdev is deregistered before its resources go away. Fixes: 3c201b5a ("net: stmmac: socfpga: Remove re-registration of reset controller") Signed-off-by:
-
Tobias Klauser authored
Use the correct attribute constant names IFLA_GSO_MAX_{SEGS,SIZE} instead of IFLA_MAX_GSO_{SEGS,SIZE} for the comments int nlmsg_size(). Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 01 Dec, 2016 5 commits
-
-
Alexander Duyck authored
In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: e10715d3 ("igb/igbvf: Add support for GSO partial") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
allan authored
The change fixes AX88772_suspend() USB vendor commands failure issues. Signed-off-by:
Allan Chou <allan@asix.com.tw> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2016-12-01 1) Change the error value when someone tries to run 32bit userspace on a 64bit host from -ENOTSUPP to the userspace exported -EOPNOTSUPP. Fix from Yi Zhao. 2) On inbound, ESN sequence numbers are already in network byte order. So don't try to convert it again, this fixes integrity verification for ESN. Fixes from Tobias Brunner. Please pull or let me know if there are problems. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This is a large batch of Netfilter fixes for net, they are: 1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist structure that allows to have several objects with the same key. Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is expecting a return value similar to memcmp(). Change location of the nat_bysource field in the nf_conn structure to avoid zeroing this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us to crashes. From Florian Westphal. 2) Don't allow malformed fragments go through in IPv6, drop them, otherwise we hit GPF, patch from Florian Westphal. 3) Fix crash if attributes are missing in nft_range, from Liping Zhang. 4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia. 5) Two patches from David Ahern to fix netfilter interaction with vrf. From David Ahern. 6) Fix element timeout calculation in nf_tables, we take milliseconds from userspace, but we use jiffies from kernelspace. Patch from Anders K. Pedersen. 7) Missing validation length netlink attribute for nft_hash, from Laura Garcia. 8) Fix nf_conntrack_helper documentation, we don't default to off anymore for a bit of time so let's get this in sync with the code. I know is late but I think these are important, specifically the NAT bits, as they are mostly addressing fallout from recent changes. I also read there are chances to have -rc8, if that is the case, that would also give us a bit more time to test this. ==================== Signed-off-by:
-
- 30 Nov, 2016 19 commits
-
-
Jason Wang authored
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Reported-by:
wangyunjian <wangyunjian@huawei.com> Signed-off-by:
-
Grygorii Strashko authored
netif_set_real_num_tx/rx_queues() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_resume() |- cpsw_ndo_open() |- netif_set_real_num_tx/rx_queues() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_open() by rtnl_lock/unlock() calls. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: commit e05107e6 ("net: ethernet: ti: cpsw: add multi queue support") Signed-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Tested-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
-
Josef Bacik authored
If we have a branch that looks something like this int foo = map->value; if (condition) { foo += blah; } else { foo = bar; } map->array[foo] = baz; We will incorrectly assume that the !condition branch is equal to the condition branch as the register for foo will be UNKNOWN_VALUE in both cases. We need to adjust this logic to only do this if we didn't do a varlen access after we processed the !condition branch, otherwise we have different ranges and need to check the other branch as well. Fixes: 48461135 ("bpf: allow access into map value arrays") Reported-by:Jann Horn <jannh@google.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Hongxu Jia authored
Since 09d96860 ("netfilter: x_tables: do compat validation via translate_table"), it used compatr structure to assign newinfo structure. In translate_compat_table of ip_tables.c and ip6_tables.c, it used compatr->hook_entry to replace info->hook_entry and compatr->underflow to replace info->underflow, but not do the same replacement in arp_tables.c. It caused invoking 32-bit "arptbale -P INPUT ACCEPT" failed in 64bit kernel. -------------------------------------- root@qemux86-64:~# arptables -P INPUT ACCEPT root@qemux86-64:~# arptables -P INPUT ACCEPT ERROR: Policy for `INPUT' offset 448 != underflow 0 arptables: Incompatible with this kernel -------------------------------------- Fixes: 09d96860 ("netfilter: x_tables: do compat validation via translate_table") Signed-off-by:
Hongxu Jia <hongxu.jia@windriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2016-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.9 mwifiex * properly terminate SSIDs so that uninitalised memory is not printed ==================== Signed-off-by:
-
David S. Miller authored
Guillaume Nault says: ==================== l2tp: fixes for l2tp_ip and l2tp_ip6 socket handling This series addresses problems found while working on commit 32c23116 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). The first three patches fix races in socket's connect, recv and bind operations. The last two ones fix scenarios where l2tp fails to correctly lookup its userspace sockets. Apart from the last patch, which is l2tp_ip6 specific, every patch fixes the same problem in the L2TP IPv4 and IPv6 code. All problems fixed by this series exist since the creation of the l2tp_ip and l2tp_ip6 modules. Changes since v1: * Patch #3: fix possible uninitialised use of 'ret' in l2tp_ip_bind(). ==================== Acked-by:
James Chapman <jchapman@katalix.com>
-
Guillaume Nault authored
The '!(addr && ipv6_addr_equal(addr, laddr))' part of the conditional matches if addr is NULL or if addr != laddr. But the intend of __l2tp_ip6_bind_lookup() is to find a sockets with the same address, so the ipv6_addr_equal() condition needs to be inverted. For better clarity and consistency with the rest of the expression, the (!X || X == Y) notation is used instead of !(X && X != Y). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
When looking up an l2tp socket, we must consider a null netdevice id as wild card. There are currently two problems caused by __l2tp_ip_bind_lookup() not considering 'dif' as wild card when set to 0: * A socket bound to a device (i.e. with sk->sk_bound_dev_if != 0) never receives any packet. Since __l2tp_ip_bind_lookup() is called with dif == 0 in l2tp_ip_recv(), sk->sk_bound_dev_if is always different from 'dif' so the socket doesn't match. * Two sockets, one bound to a device but not the other, can be bound to the same address. If the first socket binding to the address is the one that is also bound to a device, the second socket can bind to the same address without __l2tp_ip_bind_lookup() noticing the overlap. To fix this issue, we need to consider that any null device index, be it 'sk->sk_bound_dev_if' or 'dif', matches with any other value. We also need to pass the input device index to __l2tp_ip_bind_lookup() on reception so that sockets bound to a device never receive packets from other devices. This patch fixes l2tp_ip6 in the same way. Signed-off-by: -
Guillaume Nault authored
It's not enough to check for sockets bound to same address at the beginning of l2tp_ip{,6}_bind(): even if no socket is found at that time, a socket with the same address could be bound before we take the l2tp lock again. This patch moves the lookup right before inserting the new socket, so that no change can ever happen to the list between address lookup and socket insertion. Care is taken to avoid side effects on the socket in case of failure. That is, modifications of the socket are done after the lookup, when binding is guaranteed to succeed, and before releasing the l2tp lock, so that concurrent lookups will always see fully initialised sockets. For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED bit. Error code was mistakenly set to -EADDRINUSE on error by commit 32c23116 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). Using -EINVAL restores original behaviour. For l2tp_ip6, the lookup is now always done with the correct bound device. Before this patch, when binding to a link-local address, the lookup was done with the original sk->sk_bound_dev_if, which was later overwritten with addr->l2tp_scope_id. Lookup is now performed with the final sk->sk_bound_dev_if value. Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has already been checked at this point (this part of the code seems to have been copy-pasted from net/ipv6/raw.c). Signed-off-by: -
Guillaume Nault authored
Socket must be held while under the protection of the l2tp lock; there is no guarantee that sk remains valid after the read_unlock_bh() call. Same issue for l2tp_ip and l2tp_ip6. Signed-off-by:
-
Guillaume Nault authored
Socket flags aren't updated atomically, so the socket must be locked while reading the SOCK_ZAPPED flag. This issue exists for both l2tp_ip and l2tp_ip6. For IPv6, this patch also brings error handling for __ip6_datagram_connect() failures. Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Nikita Yushchenko authored
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid board: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200 pgd = ddecc000 [e0898200] *pgd=9e406811, *pte=400d1653, *ppte=400d1453 Internal error: : 1008 [#1] SMP ARM ... Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec registers while IPG clock is stopped by PM. Fix that by caching statistics in fec_enet_private. Cache is initialized at device probe time, and updated at statistics request time if device is up, and also just before turning device off on down path. Additional locking is not needed, since cached statistics is accessed either before device is registered, or under rtnl_lock(). Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by:
-
Haishuang Yan authored
vxlan_fdb_append may return error, so add the proper check, otherwise it will cause memory leak. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Changes in v2: - Unnecessary to initialize rc to zero. Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Daniele Di Proietto authored
If nf_ct_frag6_gather() returns an error other than -EINPROGRESS, it means that we still have a reference to the skb. We should free it before returning from handle_fragments, as stated in the comment above. Fixes: daaa7d64 ("netfilter: ipv6: avoid nf_iterate recursion") CC: Florian Westphal <fw@strlen.de> CC: Pravin B Shelar <pshelar@ovn.org> CC: Joe Stringer <joe@ovn.org> Signed-off-by:
Daniele Di Proietto <diproiettod@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Tobias Brunner authored
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 000ae7b2 ("esp6: Switch to new AEAD interface") Signed-off-by:
Tobias Brunner <tobias@strongswan.org> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Tobias Brunner authored
When handling inbound packets, the two halves of the sequence number stored on the skb are already in network order. Fixes: 7021b2e1 ("esp4: Switch to new AEAD interface") Signed-off-by:
-
Yi Zhao authored
It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host. But the return value is unknown for user program: ip xfrm policy list RTNETLINK answers: Unknown error 524 Replace ENOTSUPP with EOPNOTSUPP: ip xfrm policy list RTNETLINK answers: Operation not supported Signed-off-by:
Yi Zhao <yi.zhao@windriver.com> Signed-off-by:
-
