- 12 Jan, 2012 6 commits
-
-
Benjamin Herrenschmidt authored
commit c055fe07 upstream. We used to try to request 8 times more vram than needed, which would fail if the card has a too small BAR (observed with qemu & kvm). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Benjamin Herrenschmidt authored
commit 1bb0b7d2 upstream. When using a >8bpp framebuffer, offb advertises truecolor, not directcolor, and doesn't touch the color map even if it has a corresponding access method for the real hardware. Thus it needs to set the pseudo-palette with all 3 components of the color, like other truecolor framebuffers, not with copies of the color index like a directcolor framebuffer would do. This went unnoticed for a long time because it's pretty hard to get offb to kick in with anything but 8bpp (old BootX under MacOS will do that and qemu does it). Signed-off-by:
-
Larry Finger authored
commit 3f81f8f1 upstream. Testing on the openSUSE wireless forum has shown that a Linksys WUSB54GC v3 with USB ID 1737:0077 works with rt2800usb when the ID is written to /sys/.../new_id. This ID can therefore be moved out of UNKNOWN. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
commit eea915bb upstream. This oops was reported recently: firmware_loading_store+0xf9/0x17b dev_attr_store+0x20/0x22 sysfs_write_file+0x101/0x134 vfs_write+0xac/0xf3 sys_write+0x4a/0x6e system_call_fastpath+0x16/0x1b The complete backtrace was unfortunately not captured, but details can be found here: https://bugzilla.redhat.com/show_bug.cgi?id=769920 The cause is fairly clear. Its caused by the fact that firmware_loading_store has a case 0 in its switch statement that reads and writes the fw_priv->fw poniter without the protection of the fw_lock mutex. since there is a window between the time that _request_firmware sets fw_priv->fw to NULL and the time the corresponding sysfs file is unregistered, its possible for a user space application to race in, and write a zero to the loading file, causing a NULL dereference in firmware_loading_store. Fix it by extending the protection of the fw_lock mutex to cover all of the firware_loading_store function. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Joe Perches authored
commit 2eb7f204 upstream. The Japanese/Korean/Chinese versions still need updating. Also, the stable kernel 2.6.x.y descriptions are out of date and should be updated as well. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
commit bc7a2f3a upstream. The old address hasn't worked since the great intrusion of August 2011. Signed-off-by:
-
- 06 Jan, 2012 34 commits
-
-
Greg Kroah-Hartman authored
-
Mohammed Shafi Shajakhan authored
commit b25bfda3 upstream. don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by:
Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Oleg Nesterov authored
commit 8a88951b upstream. This is the temporary simple fix for 3.2, we need more changes in this area. 1. do_signal_stop() assumes that the running untraced thread in the stopped thread group is not possible. This was our goal but it is not yet achieved: a stopped-but-resumed tracee can clone the running thread which can initiate another group-stop. Remove WARN_ON_ONCE(!current->ptrace). 2. A new thread always starts with ->jobctl = 0. If it is auto-attached and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr) in do_jobctl_trap() if another debugger attaches. Change __ptrace_unlink() to set the artificial SIGSTOP for report. Alternatively we could change ptrace_init_task() to copy signr from current, but this means we can copy it for no reason and hide the possible similar problems. Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oleg Nesterov authored
commit 50b8d257 upstream. Test-case: int main(void) { int pid, status; pid = fork(); if (!pid) { for (;;) { if (!fork()) return 0; if (waitpid(-1, &status, 0) < 0) { printf("ERR!! wait: %m\n"); return 0; } } } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(waitpid(-1, NULL, 0) == pid); assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACEFORK) == 0); do { ptrace(PTRACE_CONT, pid, 0, 0); pid = waitpid(-1, NULL, 0); } while (pid > 0); return 1; } It fails because ->real_parent sees its child in EXIT_DEAD state while the tracer is going to change the state back to EXIT_ZOMBIE in wait_task_zombie(). The offending commit is 823b018e which moved the EXIT_DEAD check, but in fact we should not blame it. The original code was not correct as well because it didn't take ptrace_reparented() into account and because we can't really trust ->ptrace. This patch adds the additional check to close this particular race but it doesn't solve the whole problem. We simply can't rely on ->ptrace in this case, it can be cleared if the tracer is multithreaded by the exiting ->parent. I think we should kill EXIT_DEAD altogether, we should always remove the soon-to-be-reaped child from ->children or at least we should never do the DEAD->ZOMBIE transition. But this is too complex for 3.2. Reported-and-tested-by:
Denys Vlasenko <vda.linux@googlemail.com> Tested-by:
Lukasz Michalik <lmi@ift.uni.wroc.pl> Acked-by:
-
Linus Torvalds authored
commit 157e8bf8 upstream. This reverts commit c0afabd3. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Mandeep Singh Baines authored
commit f9fab10b upstream. vfork parent uninterruptibly and unkillably waits for its child to exec/exit. This wait is of unbounded length. Ignore such waits in the hung_task detector. Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Reported-by:
Sasha Levin <levinsasha928@gmail.com> LKML-Reference: <1325344394.28904.43.camel@lappy> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Kacur <jkacur@redhat.com> Signed-off-by:
-
Alexander Müller authored
commit 4376eee9 upstream. If we end up with no power states, don't look up current vddc. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44130 agd5f: fix patch formatting Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Kyle Manna authored
commit 3d6271f9 upstream. Without turning the MADC clock on, no MADC conversions occur. $ cat /sys/class/hwmon/hwmon0/device/in8_input [ 53.428436] twl4030_madc twl4030_madc: conversion timeout! cat: read error: Resource temporarily unavailable Signed-off-by:
Kyle Manna <kyle@kylemanna.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 96f1f05a upstream. Since we configure all the queues as CHAINABLE, we need to update the byte count for all the queues, not only the AGGREGATABLE ones. Not doing so can confuse the SCD and make the fw assert. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Stephen Rothwell authored
[ Upstream commit b9eda06f ] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9f28a2fc ] Commit 2c8cec5c (ipv4: Cache learned PMTU information in inetpeer) removed IP route cache garbage collector a bit too soon, as this gc was responsible for expired routes cleanup, releasing their neighbour reference. As pointed out by Robert Gladewitz, recent kernels can fill and exhaust their neighbour cache. Reintroduce the garbage collection, since we'll have to wait our neighbour lookups become refcount-less to not depend on this stuff. Reported-by:
Robert Gladewitz <gladewitz@gmx.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e688a604 ] Chris Boot reported crashes occurring in ipv6_select_ident(). [ 461.457562] RIP: 0010:[<ffffffff812dde61>] [<ffffffff812dde61>] ipv6_select_ident+0x31/0xa7 [ 461.578229] Call Trace: [ 461.580742] <IRQ> [ 461.582870] [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2 [ 461.589054] [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155 [ 461.595140] [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b [ 461.601198] [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e [nf_conntrack_ipv6] [ 461.608786] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.614227] [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543 [ 461.620659] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.626440] [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a [bridge] [ 461.633581] [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459 [ 461.639577] [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76 [bridge] [ 461.646887] [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f [bridge] [ 461.653997] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.659473] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.665485] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.671234] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.677299] [<ffffffffa0379215>] ? nf_bridge_update_protocol+0x20/0x20 [bridge] [ 461.684891] [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack] [ 461.691520] [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge] [ 461.697572] [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56 [bridge] [ 461.704616] [<ffffffffa0379031>] ? nf_bridge_push_encap_header+0x1c/0x26 [bridge] [ 461.712329] [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95 [bridge] [ 461.719490] [<ffffffffa037900a>] ? nf_bridge_pull_encap_header+0x1c/0x27 [bridge] [ 461.727223] [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge] [ 461.734292] [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77 [ 461.739758] [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.746203] [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111 [ 461.751950] [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.758378] [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56 [bridge] This is caused by bridge netfilter special dst_entry (fake_rtable), a special shared entry, where attaching an inetpeer makes no sense. Problem is present since commit 87c48fa3 (ipv6: make fragment identifications less predictable) Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and __ip_select_ident() fallback to the 'no peer attached' handling. Reported-by:
Chris Boot <bootc@bootc.net> Tested-by:
-
David S. Miller authored
[ Upstream commit bb3c3686 ] After commit 8e2ec639 ("ipv6: don't use inetpeer to store metrics for routes.") the test in rt6_alloc_cow() for setting the ANYCAST flag is now wrong. 'rt' will always now have a plen of 128, because it is set explicitly to 128 by ip6_rt_copy. So to restore the semantics of the test, check the destination prefix length of 'ort'. Signed-off-by:
-
Weiping Pan authored
[ Upstream commit d01ff0a0 ] After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by:
Weiping Pan <panweiping3@gmail.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit c0ed1c14 ] flow_cach_flush() might sleep but can be called from atomic context via the xfrm garbage collector. So add a flow_cache_flush_deferred() function and use this if the xfrm garbage colector is invoked from within the packet path. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Acked-by:
Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
Thomas Graf authored
[ Upstream commit a76c0adf ] When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by:
Thomas Graf <tgraf@redhat.com> Signed-off-by:
-
Xi Wang authored
[ Upstream commit 2692ba61 ] Commit 8ffd3208 voids the previous patches f6778aab and 810c0719 for limiting the autoclose value. If userspace passes in -1 on 32-bit platform, the overflow check didn't work and autoclose would be set to 0xffffffff. This patch defines a max_autoclose (in seconds) for limiting the value and exposes it through sysctl, with the following intentions. 1) Avoid overflowing autoclose * HZ. 2) Keep the default autoclose bound consistent across 32- and 64-bit platforms (INT_MAX / HZ in this patch). 3) Keep the autoclose value consistent between setsockopt() and getsockopt() calls. Suggested-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3f1e6d3f ] gred_change_vq() is called under sch_tree_lock(sch). This means a spinlock is held, and we are not allowed to sleep in this context. We might pre-allocate memory using GFP_KERNEL before taking spinlock, but this is not suitable for stable material. Signed-off-by:
-
Gerlando Falauto authored
[ Upstream commit cd7816d1 ] previous commit 3fb72f1e makes IP-Config wait for carrier on at least one network device. Before waiting (predefined value 120s), check that at least one device was successfully brought up. Otherwise (e.g. buggy bootloader which does not set the MAC address) there is no point in waiting for carrier. Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Holger Brunck <holger.brunck@keymile.com> Signed-off-by:
Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by:
-
Thomas Graf authored
[ Upstream commit 7838f2ce ] Userspace may not provide TCA_OPTIONS, in fact tc currently does so not do so if no arguments are specified on the command line. Return EINVAL instead of panicing. Signed-off-by:
-
Alex Juncu authored
[ Upstream commit 9cef310f ] Received non stream protocol packets were calling llc_cmsg_rcv that used a skb after that skb was released by sk_eat_skb. This caused received STP packets to generate kernel panics. Signed-off-by:
Alexandru Juncu <ajuncu@ixiacom.com> Signed-off-by:
Kunjan Naik <knaik@ixiacom.com> Signed-off-by:
-
Djalal Harouni authored
[ Upstream commit a454dace ] Signed-off-by:
Djalal Harouni <tixxdz@opendz.org> Acked-by:
-
Markus Kötter authored
[ Upstream commit a03ffcf8 ] x86 jump instruction size is 2 or 5 bytes (near/long jump), not 2 or 6 bytes. In case a conditional jump is followed by a long jump, conditional jump target is one byte past the start of target instruction. Signed-off-by:
Markus Kötter <nepenthesdev@gmail.com> Signed-off-by:
-
David S. Miller authored
[ A combination of upstream commits 1d299bc7 and e88d2468 ] Although we provide a proper way for a debugger to control whether syscall restart occurs, we run into problems because orig_i0 is not saved and restored properly. Luckily we can solve this problem without having to make debuggers aware of the issue. Across system calls, several registers are considered volatile and can be safely clobbered. Therefore we use the pt_regs save area of one of those registers, %g6, as a place to save and restore orig_i0. Debuggers transparently will do the right thing because they save and restore this register already. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2e8ecdc0 ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit a52312b8 ] Properly return the original destination buffer pointer. Signed-off-by:
Kjetil Oftedal <oftedal@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 21f74d36 ] This is setting things up so that we can correct the return value, so that it properly returns the original destination buffer pointer. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 045b7de9 ] Signed-off-by:
-
David S. Miller authored
[ Upstream commit 3e37fd31 ] To handle the large physical addresses, just make a simple wrapper around remap_pfn_range() like MIPS does. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0b64120c ] Some of the sun4v code patching occurs in inline functions visible to, and usable by, modules. Therefore we have to patch them up during module load. Signed-off-by:
-
David S. Miller authored
[ Upstream commit b1f44e13 ] The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 7cc85833 ] This silently was working for many years and stopped working on Niagara-T3 machines. We need to set the MSIQ to VALID before we can set it's state to IDLE. On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL errors. The hypervisor documentation says, rather ambiguously, that the MSIQ must be "initialized" before one can set the state. I previously understood this to mean merely that a successful setconf() operation has been performed on the MSIQ, which we have done at this point. But it seems to also mean that it has been set VALID too. Signed-off-by:
-
Nagalakshmi Nandigama authored
Upstrem commit: 911ae943 There's a bug in the MSIX backup and restore routines that cause a crash on non-x86 (direct access to PCI space not via read/write). These routines are unnecessary and were removed by the above commit, so also remove them from stable to fix the crash. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
KOSAKI Motohiro authored
commit e26a5114 upstream. commit 8aacc9f5 ("mm/mempolicy.c: fix pgoff in mbind vma merge") is the slightly incorrect fix. Why? Think following case. 1. map 4 pages of a file at offset 0 [0123] 2. map 2 pages just after the first mapping of the same file but with page offset 2 [0123][23] 3. mbind() 2 pages from the first mapping at offset 2. mbind_range() should treat new vma is, [0123][23] |23| mbind vma but it does [0123][23] |01| mbind vma Oops. then, it makes wrong vma merge and splitting ([01][0123] or similar). This patch fixes it. [testcase] test result - before the patch case4: 126: test failed. expect '2,4', actual '2,2,2' case5: passed case6: passed case7: passed case8: passed case_n: 246: test failed. expect '4,2', actual '1,4' ------------[ cut here ]------------ kernel BUG at mm/filemap.c:135! invalid opcode: 0000 [#4] SMP DEBUG_PAGEALLOC (snip long bug on messages) test result - after the patch case4: passed case5: passed case6: passed case7: passed case8: passed case_n: passed source: mbind_vma_test.c ============================================================ #include <numaif.h> #include <numa.h> #include <sys/mman.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> static unsigned long pagesize; void* mmap_addr; struct bitmask *nmask; char buf[1024]; FILE *file; char retbuf[10240] = ""; int mapped_fd; char *rubysrc = "ruby -e '\ pid = %d; \ vstart = 0x%llx; \ vend = 0x%llx; \ s = `pmap -q #{pid}`; \ rary = []; \ s.each_line {|line|; \ ary=line.split(\" \"); \ addr = ary[0].to_i(16); \ if(vstart <= addr && addr < vend) then \ rary.push(ary[1].to_i()/4); \ end; \ }; \ print rary.join(\",\"); \ '"; void init(void) { void* addr; char buf[128]; nmask = numa_allocate_nodemask(); numa_bitmask_setbit(nmask, 0); pagesize = getpagesize(); sprintf(buf, "%s", "mbind_vma_XXXXXX"); mapped_fd = mkstemp(buf); if (mapped_fd == -1) perror("mkstemp "), exit(1); unlink(buf); if (lseek(mapped_fd, pagesize*8, SEEK_SET) < 0) perror("lseek "), exit(1); if (write(mapped_fd, "\0", 1) < 0) perror("write "), exit(1); addr = mmap(NULL, pagesize*8, PROT_NONE, MAP_SHARED, mapped_fd, 0); if (addr == MAP_FAILED) perror("mmap "), exit(1); if (mprotect(addr+pagesize, pagesize*6, PROT_READ|PROT_WRITE) < 0) perror("mprotect "), exit(1); mmap_addr = addr + pagesize; /* make page populate */ memset(mmap_addr, 0, pagesize*6); } void fin(void) { void* addr = mmap_addr - pagesize; munmap(addr, pagesize*8); memset(buf, 0, sizeof(buf)); memset(retbuf, 0, sizeof(retbuf)); } void mem_bind(int index, int len) { int err; err = mbind(mmap_addr+pagesize*index, pagesize*len, MPOL_BIND, nmask->maskp, nmask->size, 0); if (err) perror("mbind "), exit(err); } void mem_interleave(int index, int len) { int err; err = mbind(mmap_addr+pagesize*index, pagesize*len, MPOL_INTERLEAVE, nmask->maskp, nmask->size, 0); if (err) perror("mbind "), exit(err); } void mem_unbind(int index, int len) { int err; err = mbind(mmap_addr+pagesize*index, pagesize*len, MPOL_DEFAULT, NULL, 0, 0); if (err) perror("mbind "), exit(err); } void Assert(char *expected, char *value, char *name, int line) { if (strcmp(expected, value) == 0) { fprintf(stderr, "%s: passed\n", name); return; } else { fprintf(stderr, "%s: %d: test failed. expect '%s', actual '%s'\n", name, line, expected, value); // exit(1); } } /* AAAA PPPPPPNNNNNN might become PPNNNNNNNNNN case 4 below */ void case4(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); mem_bind(0, 4); mem_unbind(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("2,4", retbuf, "case4", __LINE__); fin(); } /* AAAA PPPPPPNNNNNN might become PPPPPPPPPPNN case 5 below */ void case5(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); mem_bind(0, 2); mem_bind(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("4,2", retbuf, "case5", __LINE__); fin(); } /* AAAA PPPPNNNNXXXX might become PPPPPPPPPPPP 6 */ void case6(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); mem_bind(0, 2); mem_bind(4, 2); mem_bind(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("6", retbuf, "case6", __LINE__); fin(); } /* AAAA PPPPNNNNXXXX might become PPPPPPPPXXXX 7 */ void case7(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); mem_bind(0, 2); mem_interleave(4, 2); mem_bind(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("4,2", retbuf, "case7", __LINE__); fin(); } /* AAAA PPPPNNNNXXXX might become PPPPNNNNNNNN 8 */ void case8(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); mem_bind(0, 2); mem_interleave(4, 2); mem_interleave(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("2,4", retbuf, "case8", __LINE__); fin(); } void case_n(void) { init(); sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6); /* make redundunt mappings [0][1234][34][7] */ mmap(mmap_addr + pagesize*4, pagesize*2, PROT_READ|PROT_WRITE, MAP_FIXED|MAP_SHARED, mapped_fd, pagesize*3); /* Expect to do nothing. */ mem_unbind(2, 2); file = popen(buf, "r"); fread(retbuf, sizeof(retbuf), 1, file); Assert("4,2", retbuf, "case_n", __LINE__); fin(); } int main(int argc, char** argv) { case4(); case5(); case6(); case7(); case8(); case_n(); return 0; } ============================================================= Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Caspar Zhang <caspar@casparzhang.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
