- 12 Feb, 2019 36 commits
-
-
Nicholas Mc Guire authored
[ Upstream commit aad172b0 ] devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_sar_adc_clk_init() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 3adbf342 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit aeaebcc1 ] Clang warns: drivers/dma/xilinx/zynqmp_dma.c:166:4: warning: attribute 'aligned' is ignored, place it after "struct" to apply attribute to type declaration [-Wignored-attributes] }; __aligned(64) ^ ./include/linux/compiler_types.h:200:38: note: expanded from macro '__aligned' ^ 1 warning generated. As Nick pointed out in the previous version of this patch, the author likely intended for this struct to be 8-byte (64-bit) aligned, not 64-byte, which is the default. Remove the hanging __aligned attribute. Fixes: b0cc417c ("dmaengine: Add Xilinx zynqmp dma engine driver support") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit aea0a897 ] Fix smatch warning: drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn: passing zero to 'ERR_PTR' 'err' should be set while device_create_with_groups and pps_register_source fails Fixes: 85a66e55 ("ptp: create "pins" together with the rest of attributes") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 8ea0f2ba ] of_parse_phandle() returns the device node with refcount incremented. There are two nodes that are used temporary in mtk_vcodec_init_enc_pm(), but their refcounts are not decremented. The patch adds one of_node_put() and fixes returning error codes. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 9eb40fa2 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_tegra() doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> [treding: slightly rewrite to avoid inline comparison] Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Pu Wen authored
[ Upstream commit 4787eff3 ] The tool perf is useful for the performance analysis on the Hygon Dhyana platform. But right now there is no Hygon support for it to analyze the KVM guest os data. So add Hygon Dhyana support to it by checking vendor string to share the code path of AMD. Signed-off-by:
Pu Wen <puwen@hygon.cn> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cnSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sami Tolvanen authored
[ Upstream commit 5818c683 ] If an ARM mapping symbol shares an address with a valid symbol, find_elf_symbol can currently return the mapping symbol instead, as the symbol is not validated. This can result in confusing warnings: WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference from the function set_reset_devices() to the variable .init.text:$x.0 This change adds a call to is_valid_name to find_elf_symbol, similarly to how it's already used in find_elf_symbol2. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 1e86ace4 ] Currently the cpu affinity hint mask for completion EQs is stored and read from the wrong place, since reading and storing is done from the same index, there is no actual issue with that, but internal irq_info for completion EQs stars at MLX5_EQ_VEC_COMP_BASE offset in irq_info array, this patch changes the code to use the correct offset to store and read the IRQ affinity hint. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit c10b26ab ] When building the kernel with Clang, the following section mismatch warnings appears: WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from the function _setup() to the function .init.text:_setup_iclk_autoidle() The function _setup() references the function __init _setup_iclk_autoidle(). This is often because _setup lacks a __init annotation or the annotation of _setup_iclk_autoidle is wrong. WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from the function _setup() to the function .init.text:_setup_reset() The function _setup() references the function __init _setup_reset(). This is often because _setup lacks a __init annotation or the annotation of _setup_reset is wrong. WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from the function _setup() to the function .init.text:_setup_postsetup() The function _setup() references the function __init _setup_postsetup(). This is often because _setup lacks a __init annotation or the annotation of _setup_postsetup is wrong. _setup is used in omap_hwmod_allocate_module, which isn't marked __init and looks like it shouldn't be, meaning to fix these warnings, those functions must be moved out of the init section, which this patch does. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Damian Kos authored
[ Upstream commit fa68d4f8 ] Some of the functions (like cdn_dp_dpcd_read, cdn_dp_get_edid_block) allow to read 64KiB, but the cdn_dp_mailbox_read_receive, that is used by them, can read only up to 255 bytes at once. Normally, it's not a big issue as DPCD or EDID reads won't (hopefully) exceed that value. The real issue here is the revocation list read during the HDCP authentication process. (problematic use case: https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/rockchip/cdn-dp-reg.c#1152) The list can reach 127*5+4 bytes (num devs * 5 bytes per ID/Bksv + 4 bytes of an additional info). In other words - CTSes with HDCP Repeater won't pass without this fix. Oh, and the driver will most likely stop working (best case scenario). Signed-off-by:
Damian Kos <dkos@cadence.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1541518625-25984-1-git-send-email-dkos@cadence.comSigned-off-by:
-
Ben Dooks authored
[ Upstream commit 810eeb1f ] The smsc95xx driver already takes into account the NET_IP_ALIGN parameter when setting up the receive packet data, which means we do not need to worry about aligning the packets in the usbnet driver. Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now passed to the ip_rcv() routine with the start on an aligned address. Tested on Raspberry Pi B3. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Renato Lui Geh authored
[ Upstream commit 336650c7 ] The ad7780 driver previously did not read the correct device output, as it read an outdated value set at initialization. It now updates its voltage on read. Signed-off-by:
Renato Lui Geh <renatogeh@gmail.com> Acked-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Brian Norris authored
[ Upstream commit 6ad16b78 ] EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of reasons, and there are very few cases in which they should be treated as wakeup interrupts (particularly, when a certain MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the mainline cros_ec_sensor driver yet). Most of the time, they are benign sensor readings. In any case, the top-level cros_ec device doesn't know enough to determine that they should wake the system, and so it should not report the event. This would be the job of the cros_ec_sensors driver to parse. This patch adds checks to cros_ec_get_next_event() such that it doesn't signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO. This patch is particularly relevant on devices like Scarlet (Rockchip RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware reports sensor events much more frequently. This was causing /sys/power/wakeup_count to increase very frequently, often needlessly interrupting our ability to suspend the system. Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 4fcba780 ] The patch fixes: hv_kvp_daemon.c: In function 'kvp_set_ip_info': hv_kvp_daemon.c:1305:2: note: 'snprintf' output between 41 and 4136 bytes into a destination of size 4096 The "(unsigned int)str_len" is to avoid: hv_kvp_daemon.c:1309:30: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare] Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Andreas Puhm authored
[ Upstream commit 68f60538 ] The probe function needs to verify the CvP enable bit in order to properly determine if FPGA Manager functionality can be safely enabled. Fixes: 34d1dc17 ("fpga manager: Add Altera CvP driver") Signed-off-by:
Andreas Puhm <puhm@oregano.at> Signed-off-by:
Anatolij Gustschin <agust@denx.de> Reviewed-by:
Moritz Fischer <mdf@kernel.org> Acked-by:
Alan Tull <atull@kernel.org> Signed-off-by:
-
Matheus Tavares authored
[ Upstream commit b3a3eafe ] Previously, ad2s90_probe ignored the return code from spi_setup, not handling its possible failure. This patch makes ad2s90_probe check if the code is an error code and, if so, do the following: - Call dev_err with an appropriate error message. - Return the spi_setup's error code. Note: The 'return ret' statement could be out of the 'if' block, but this whole block will be moved up in the function in the patch: 'staging:iio:ad2s90: Move device registration to the end of probe'. Signed-off-by:
Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 5ec17af7 ] The Intel EG20T Platform Controller Hub used on the MIPS Boston development board supports prefetching memory to optimize DMA transfers. Unfortunately for unknown reasons this doesn't work well with some MIPS CPUs such as the P6600, particularly when using an I/O Coherence Unit (IOCU) to provide cache-coherent DMA. In these systems it is common for DMA data to be lost, resulting in broken access to EG20T devices such as the MMC or SATA controllers. Support for a DT property to configure the prefetching was added a while back by commit 549ce8f1 ("misc: pch_phub: Read prefetch value from device tree if passed") but we never added the DT snippet to make use of it. Add that now in order to disable the prefetching & fix DMA on the affected systems. Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21068/ Cc: linux-mips@linux-mips.org Signed-off-by:
-
Miroslav Lichvar authored
[ Upstream commit 83d0bdc7 ] If a gettime64 call fails, return the error and avoid copying data back to user. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
-
Andy Duan authored
[ Upstream commit 397bd921 ] Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Andy Duan <fugang.duan@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit 0560054d ] For the YUV conversion to work properly, ->x_scaling[1] should never be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE into VC4_SCALING_PPF when that happens. The old ->x_scaling[0] adjustment is dropped as I couldn't find any mention to this constraint in the spec and it's proven to be unnecessary (I tested various multi-planar YUV formats with scaling disabled, and all of them worked fine without this adjustment). Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.comSigned-off-by:
-
Eric Biggers authored
[ Upstream commit 0a6a40c2 ] In the "aes-fixed-time" AES implementation, disable interrupts while accessing the S-box, in order to make cache-timing attacks more difficult. Previously it was possible for the CPU to be interrupted while the S-box was loaded into L1 cache, potentially evicting the cachelines and causing later table lookups to be time-variant. In tests I did on x86 and ARM, this doesn't affect performance significantly. Responsiveness is potentially a concern, but interrupts are only disabled for a single AES block. Note that even after this change, the implementation still isn't necessarily guaranteed to be constant-time; see https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion of the many difficulties involved in writing truly constant-time AES software. But it's valuable to make such attacks more difficult. Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Frank Rowand authored
[ Upstream commit 5b3f5c40 ] The previous commit, "of: overlay: add missing of_node_get() in __of_attach_node_sysfs" added a missing of_node_get() to __of_attach_node_sysfs(). This results in a refcount imbalance for nodes attached with dlpar_attach_node(). The calling sequence from dlpar_attach_node() to __of_attach_node_sysfs() is: dlpar_attach_node() of_attach_node() __of_attach_node_sysfs() For more detailed description of the node refcount, see commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"). Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 53bb565f ] In the expression "word1 << 16", word1 starts as u16, but is promoted to a signed int, then sign-extended to resource_size_t, which is probably not what was intended. Cast to resource_size_t to avoid the sign extension. This fixes an identical issue as fixed by commit 0b2d7076 ("x86/PCI: Fix Broadcom CNB20LE unintended sign extension") back in 2014. Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension") Fixes: 3f6ea84a ("PCI: read memory ranges out of Broadcom CNB20LE host bridge") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Bob Peterson authored
[ Upstream commit 216f0efd ] Before this patch, recovery would cause all callbacks to be delayed, put on a queue, and afterward they were all queued to the callback work queue. This patch does the same thing, but occasionally takes a break after 25 of them so it won't swamp the CPU at the expense of other RT processes like corosync. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Yi Wang authored
[ Upstream commit 46fda5b5 ] Smatch report warnings: drivers/clk/imgtec/clk-boston.c:76 clk_boston_setup() warn: possible memory leak of 'onecell' drivers/clk/imgtec/clk-boston.c:83 clk_boston_setup() warn: possible memory leak of 'onecell' drivers/clk/imgtec/clk-boston.c:90 clk_boston_setup() warn: possible memory leak of 'onecell' 'onecell' is malloced in clk_boston_setup(), but not be freed before leaving from the error handling cases. Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yufen Wang authored
[ Upstream commit 82c08c3e ] In case panic() and panic() called at the same time on different CPUS. For example: CPU 0: panic() __crash_kexec machine_crash_shutdown crash_smp_send_stop machine_kexec BUG_ON(num_online_cpus() > 1); CPU 1: panic() local_irq_disable panic_smp_self_stop If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump fails. CPU1 can't receive the ipi irq, CPU1 will be always online. To fix this problem, this patch split out the panic_smp_self_stop() and add set_cpu_online(smp_processor_id(), false). Signed-off-by:
Yufen Wang <wangyufen@huawei.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
James Smart authored
[ Upstream commit 30e196ca ] After a LOGO in response to an ABTS timeout, a PLOGI wasn't issued to re-establish the login. An nlp_type check in the LOGO completion handler failed to restart discovery for NVME targets. Revised the nlp_type check for NVME as well as SCSI. While reviewing the LOGO handling a few other issues were seen and were addressed: - Better lock synchronization around ndlp data types - When the ABTS times out, unregister the RPI before sending the LOGO so that all local exchange contexts are cleared and nothing received while awaiting LOGO/PLOGI handling will be accepted. - LOGO handling optimized to: Wait only R_A_TOV for a response. It doesn't need to be retried on timeout. If there wasn't a response, a PLOGI will be sent, thus an implicit logout applies as well when the other port sees it. If there is a response, any kind of response is considered "good" and the XRI quarantined for a exchange qualifier window. - PLOGI is issued as soon a LOGO state is resolved. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Suganath Prabu authored
[ Upstream commit dc730212 ] Call sas_remove_host() before removing the target devices in the driver's .remove() callback function(i.e. during driver unload time). So that driver can provide a way to allow SYNC CACHE, START STOP unit commands etc. (which are issued from SML) to the target drives during driver unload time. Once sas_remove_host() is called before removing the target drives then driver can just clean up the resources allocated for target devices and no need to call sas_port_delete_phy(), sas_port_delete() API's as these API's internally called from sas_remove_host(). Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit b114d900 ] When LCB's are rejected, if beaconing was already in progress, the Reason Code Explanation was not being set. Should have been set to command in progress. Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 3831a2a0 ] In order to properly support dynack in ad-hoc mode running wpa_supplicant, take into account authentication frames for 'late ack' detection. This patch has been tested on devices mounted on offshore high-voltage stations connected through ~24Km link Reported-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit 819bec35 ] Prevent possible race by parallel threads between ipu_image_convert_run() and ipu_image_convert_unprepare(). This involves setting ctx->aborting to true unconditionally so that no new job runs can be queued during unprepare, and holding the ctx->aborting flag until the context is freed. Note that the "normal" ipu_image_convert_abort() case (e.g. not during context unprepare) should clear the ctx->aborting flag after aborting any active run and clearing the context's pending queue. This is because it should be possible to continue to use the conversion context and queue more runs after an abort. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Tested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1539c7f2 ] Randconfig testing revealed a very old bug, with gcc-8: sound/soc/intel/atom/sst/sst_loader.c: In function 'sst_load_fw': sound/soc/intel/atom/sst/sst_loader.c:357:5: error: 'fw' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (fw == NULL) { ^ sound/soc/intel/atom/sst/sst_loader.c:354:25: note: 'fw' was declared here const struct firmware *fw; We must check the return code of request_firmware() before we look at the pointer result that may be uninitialized when the function fails. Fixes: 9012c954 ("ASoC: Intel: mrfld - Add DSP load and management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 3c7b30f7 ] The BCM2835 pinctrl driver acquires a spinlock in its ->irq_enable, ->irq_disable and ->irq_set_type callbacks. Spinlocks become sleeping locks with CONFIG_PREEMPT_RT_FULL=y, therefore invocation of one of the callbacks in atomic context may cause a hard lockup if at least two GPIO pins in the same bank are used as interrupts. The issue doesn't occur with just a single interrupt pin per bank because the lock is never contended. I'm experiencing such lockups with GPIO 8 and 28 used as level-triggered interrupts, i.e. with ->irq_disable being invoked on reception of every IRQ. The critical section protected by the spinlock is very small (one bitop and one RMW of an MMIO register), hence converting to a raw spinlock seems a better trade-off than converting the driver to threaded IRQ handling (which would increase latency to handle an interrupt). Cc: Mathias Duckeck <m.duckeck@kunbus.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Deepak Sharma authored
[ Upstream commit d5c04dff ] Modify vgem_init to take platform dev as parent in drm_dev_init. This will make drm device available at "/sys/devices/platform/vgem" in x86 chromebook. v2: rebase, address checkpatch typo and line over 80 characters Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Deepak Sharma <deepak.sharma@amd.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.comSigned-off-by:
-
Slawomir Stepien authored
[ Upstream commit 0559ef7f ] Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative error code. This change will ensure that this error is being passed up in the call stack, so it can be handled. Signed-off-by:
Slawomir Stepien <sst@poczta.fm> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit a3780509 ] idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential spectre issue 'dma->buflist' [r] (local cap) Fix this by sanitizing idx before using it to index dma->buflist Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 06 Feb, 2019 4 commits
-
-
Greg Kroah-Hartman authored
-
Amir Goldstein authored
commit b469e7e4 upstream. When an event is reported on a sub-directory and the parent inode has a mark mask with FS_EVENT_ON_CHILD|FS_ISDIR, the event will be sent to fsnotify() even if the event type is not in the parent mark mask (e.g. FS_OPEN). Further more, if that event happened on a mount or a filesystem with a mount/sb mark that does have that event type in their mask, the "on child" event will be reported on the mount/sb mark. That is not desired, because user will get a duplicate event for the same action. Note that the event reported on the victim inode is never merged with the event reported on the parent inode, because of the check in should_merge(): old_fsn->inode == new_fsn->inode. Fix this by looking for a match of an actual event type (i.e. not just FS_ISDIR) in parent's inode mark mask and by not reporting an "on child" event to group if event type is only found on mount/sb marks. [backport hint: The bug seems to have always been in fanotify, but this patch will only apply cleanly to v4.19.y] Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> [amir: backport to v4.9] Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 726e4109 upstream. For devices with a class, we create a "glue" directory between the parent device and the new device with the class name. This directory is never "explicitely" removed when empty however, this is left to the implicit sysfs removal done by kobject_release() when the object loses its last reference via kobject_put(). This is problematic because as long as it's not been removed from sysfs, it is still present in the class kset and in sysfs directory structure. The presence in the class kset exposes a use after free bug fixed by the previous patch, but the presence in sysfs means that until the kobject is released, which can take a while (especially with kobject debugging), any attempt at re-creating such as binding a new device for that class/parent pair, will result in a sysfs duplicate file name error. This fixes it by instead doing an explicit kobject_del() when the glue dir is empty, by keeping track of the number of child devices of the gluedir. This is made easy by the fact that all glue dir operations are done with a global mutex, and there's already a function (cleanup_glue_dir) called in all the right places taking that mutex that can be enhanced for this. It appears that this was in fact the intent of the function, but the implementation was wrong. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <groeck@google.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Paulo Alcantara authored
commit 28eb24ff upstream. In case a hostname resolves to a different IP address (e.g. long running mounts), make sure to resolve it every time prior to calling generic_ip_connect() in reconnect. Suggested-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
