- 10 Jun, 2023 12 commits
-
-
Matthieu Baerts authored
When a required tool is missing, the return code 4 (SKIP) should be returned instead of 1 (FAIL). Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is TCP_INQ cmsg support introduced in commit 2c9e7765 ("mptcp: add TCP_INQ cmsg support"). It is possible to look for "mptcp_ioctl" in kallsyms because it was needed to introduce the mentioned feature. We can skip these tests and not set TCPINQ option if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5cbd886c ("selftests: mptcp: add TCP_INQ support") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. It is possible to look for "mptcp_diag_fill_info" in kallsyms because it is introduced by the mentioned feature. So we can know in advance if the feature is supported and skip the sub-test if not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. We cannot guess in advance which sizes the kernel will returned: older kernel can returned smaller sizes, e.g. recently the tcp_info structure has been modified in commit 71fc7047 ("tcp: add rcv_wnd and plb_rehash to TCP_INFO") where a new field has been added. The userspace can also expect a smaller size if it is compiled with old uAPI kernel headers. So for these sizes, we can only check if they are above a certain threshold, 0 for the moment. We can also only compared sizes with the ones set by the kernel. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the fullmesh flag that can be given to the MPTCP in-kernel path-manager and introduced in commit 2843ff6f ("mptcp: remote addresses fullmesh"). If the flag is not visible in the dump after having set it, we don't check the content. Note that if we expect to have this feature and SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always check the content to avoid regressions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6da1dfdd ("selftests: mptcp: add set_flags tests in pm_netlink.sh") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the checks of the default limits returned by the MPTCP in-kernel path-manager. The default values have been modified by commit 72bcbc46 ("mptcp: increase default max additional subflows to 2"). Instead of comparing with hardcoded values, we can get the default one and compare with them. Note that if we expect to have the latest version, we continue to check the hardcoded values to avoid unexpected behaviour changes. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685 ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the reporting of the MPTCP sockets being used, introduced by commit c558246e ("mptcp: add statistics for mptcp socket in use"). Similar to the parent commit, it looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info and if nothing is returned, the test is marked as skipped. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: e04a30f7 ("selftest: mptcp: add test for mptcp socket in use") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the listen diag dump support introduced by commit 4fa39b70 ("mptcp: listen diag dump support"). It looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info if nothing is returned, the test is marked as skipped. That's not ideal because something could be wrong with the feature and instead of reporting an error, the test could be marked as skipped. If we know in advanced that the feature is supposed to be supported, the tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in this case the test will report an error instead of marking the test as skipped if nothing is returned. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: f2ae0fa6 ("selftests/mptcp: add diag listen tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of TCP_FASTOPEN socket option with MPTCP connections introduced by commit 4ffb0a02 ("mptcp: add TCP_FASTOPEN sock option"). It is possible to look for "mptcp_fastopen_" in kallsyms to know if the feature is supported or not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ca7ae891 ("selftests: mptcp: mptfo Initiator/Listener") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the full support of disconnections from the userspace introduced by commit b29fcfb5 ("mptcp: full disconnect implementation"). It is possible to look for "mptcp_pm_data_reset" in kallsyms because a preparation patch added it to ease the introduction of the mentioned feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 05be5e27 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of IP(V6)_TRANSPARENT socket option with MPTCP connections introduced by commit c9406a23 ("mptcp: sockopt: add SOL_IP freebind & transparent options"). It is possible to look for "__ip_sock_set_tos" in kallsyms because IP(V6)_TRANSPARENT socket option support has been added after TOS support which came with the required infrastructure in MPTCP sockopt code. To support TOS, the following function has been exported (T). Not great but better than checking for a specific kernel version. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5fb62e9c ("selftests: mptcp: add tproxy test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. New functions are now available to easily detect if a certain feature is missing by looking at kallsyms. These new helpers are going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by:
-
- 09 Jun, 2023 8 commits
-
-
Lee Jones authored
In the event of a failure in tcf_change_indev(), u32_set_parms() will immediately return without decrementing the recently incremented reference counter. If this happens enough times, the counter will rollover and the reference freed, leading to a double free which can be used to do 'bad things'. In order to prevent this, move the point of possible failure above the point where the reference counter is incremented. Also save any meaningful return values to be applied to the return data at the appropriate point in time. This issue was caught with KASAN. Fixes: 705c7091 ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
As shown in [1], out-of-bounds access occurs in two cases: 1)when the qdisc of the taprio type is used to replace the previously configured taprio, count and offset in tc_to_txq can be set to 0. In this case, the value of *txq in taprio_next_tc_txq() will increases continuously. When the number of accessed queues exceeds the number of queues on the device, out-of-bounds access occurs. 2)When packets are dequeued, taprio can be deleted. In this case, the tc rule of dev is cleared. The count and offset values are also set to 0. In this case, out-of-bounds access is also caused. Now the restriction on the queue number is added. [1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg Fixes: 2f530df7 ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode") Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Tested-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon introduced a new exact match feature, which is used for DMAC filtering. The state of installed DMAC filters in this exact match table is getting corrupted when promiscuous mode is toggled. Fix this by not touching Exact match related config when promiscuous mode is toggled. Fixes: 2dba9459 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Yoshihiro Shimoda authored
The timestamp descriptors were intended to act cyclically. Descriptors from index 0 through gq->ring_size - 1 contain actual information, and the last index (gq->ring_size) should have LINKFIX to indicate the first index 0 descriptor. However, the LINKFIX value is missing, causing the timestamp feature to stop after all descriptors are used. To resolve this issue, set the LINKFIX to the timestamp descritors. Reported-by:
Phong Hoang <phong.hoang.wz@renesas.com> Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Max Tottenham authored
Instead of relying on skb->transport_header being set correctly, opt instead to parse the L3 header length out of the L3 headers for both IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a bug if GRO is disabled, when GRO is disabled skb->transport_header is set by __netif_receive_skb_core() to point to the L3 header, it's later fixed by the upper protocol layers, but act_pedit will receive the SKB before the fixups are completed. The existing behavior causes the following to edit the L3 header if GRO is disabled instead of the UDP header: tc filter add dev eth0 ingress protocol ip flower ip_proto udp \ dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053 Also re-introduce a rate-limited warning if we were unable to extract the header offset when using the 'ex' interface. Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by:Max Tottenham <mtottenh@akamai.com> Reviewed-by:
Josh Hunt <johunt@akamai.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/Reviewed-by:
-
Wes Huang authored
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by:
Wes Huang <wes.huang@moxa.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.comSigned-off-by:
-
Yuezhen Luan authored
82580/i354/i350 features circle-counter-like timestamp registers that are different with newer i210. The EXTTS capture value in AUXTSMPx should be converted from raw circle counter value to timestamp value in resolution of 1 nanosec by the driver. This issue can be reproduced on i350 nics, connecting an 1PPS signal to a SDP pin, and run 'ts2phc' command to read external 1PPS timestamp value. On i210 this works fine, but on i350 the extts is not correctly converted. The i350/i354/82580's SYSTIM and other timestamp registers are 40bit counters, presenting time range of 2^40 ns, that means these registers overflows every about 1099s. This causes all these regs can't be used directly in contrast to the newer i210/i211s. The igb driver needs to convert these raw register values to valid time stamp format by using kernel timecounter apis for i350s families. Here the igb_extts() just forgot to do the convert. Fixes: 38970eac ("igb: support EXTTS on 82580/i354/i350") Signed-off-by:
Yuezhen Luan <eggcar.luan@gmail.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
Guillaume Nault authored
Ping sockets can't send packets when they're bound to a VRF master device and the output interface is set to a slave device. For example, when net.ipv4.ping_group_range is properly set, so that ping6 can use ping sockets, the following kind of commands fails: $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1 What happens is that sk->sk_bound_dev_if is set to the VRF master device, but 'oif' is set to the real output device. Since both are set but different, ping_v6_sendmsg() sees their value as inconsistent and fails. Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if. This fixes the following kselftest failure: $ ./fcnal-test.sh -t ipv6_ping [...] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL] Reported-by:
Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/Tested-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.comSigned-off-by:
-
- 08 Jun, 2023 16 commits
-
-
Wei Fang authored
For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, wifi, netfilter, bluetooth and ebpf. Current release - regressions: - bpf: sockmap: avoid potential NULL dereference in sk_psock_verdict_data_ready() - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() - phylink: actually fix ksettings_set() ethtool call - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3 Current release - new code bugs: - wifi: mt76: fix possible NULL pointer dereference in mt7996_mac_write_txwi() Previous releases - regressions: - netfilter: fix NULL pointer dereference in nf_confirm_cthelper - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS - openvswitch: fix upcall counter access before allocation - bluetooth: - fix use-after-free in hci_remove_ltk/hci_remove_irk - fix l2cap_disconnect_req deadlock - nic: bnxt_en: prevent kernel panic when receiving unexpected PHC_UPDATE event Previous releases - always broken: - core: annotate rfs lockless accesses - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values - netfilter: add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() - bpf: fix UAF in task local storage - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294 - ipv6: rpl: fix route of death. - tcp: gso: really support BIG TCP - mptcp: fixes for user-space PM address advertisement - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT - can: avoid possible use-after-free when j1939_can_rx_register fails - batman-adv: fix UaF while rescheduling delayed work - eth: qede: fix scheduling while atomic - eth: ice: make writes to /dev/gnssX synchronous" * tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event bnxt_en: Skip firmware fatal error recovery if chip is not accessible bnxt_en: Query default VLAN before VNIC setup on a VF bnxt_en: Don't issue AP reset during ethtool's reset operation bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() net: bcmgenet: Fix EEE implementation eth: ixgbe: fix the wake condition eth: bnxt: fix the wake condition lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() bpf: Add extra path pointer check to d_path helper net: sched: fix possible refcount leak in tc_chain_tmplt_add() net: sched: act_police: fix sparse errors in tcf_police_dump() net: openvswitch: fix upcall counter access before allocation net: sched: move rtm_tca_policy declaration to include file ice: make writes to /dev/gnssX synchronous net: sched: add rcu annotations around qdisc->qdisc_sleeping rfs: annotate lockless accesses to RFS sock flow table rfs: annotate lockless accesses to sk->sk_rxhash virtio_net: use control_buf for coalesce params ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "These are a set of regression fixes discovered on recent kernels. I was hoping to send this to you a week and half ago, but events out of my control delayed finalising the changes until early this week. Whilst the diffstat looks large for this stage of the merge window, a large chunk of it comes from moving the guts of one function from one file to another i.e. it's the same code, it is just run in a different context where it is safe to hold a specific lock. Otherwise the individual changes are relatively small and straigtht forward. Summary: - Propagate unlinked inode list corruption back up to log recovery (regression fix) - improve corruption detection for AGFL entries, AGFL indexes and XEFI extents (syzkaller fuzzer oops report) - Avoid double perag reference release (regression fix) - Improve extent merging detection in scrub (regression fix) - Fix a new undefined high bit shift (regression fix) - Fix for AGF vs inode cluster buffer deadlock (regression fix)" * tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: collect errors from inodegc for unlinked inode recovery xfs: validate block number being freed before adding to xefi xfs: validity check agbnos on the AGFL xfs: fix agf/agfl verification on v4 filesystems xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag() xfs: fix broken logic when detecting mergeable bmap records xfs: Fix undefined behavior of shift into sign bit xfs: fix AGF vs inode cluster buffer deadlock xfs: defered work could create precommits xfs: restore allocation trylock iteration xfs: buffer pins need to hold a buffer reference -
Paolo Abeni authored
Michael Chan says: ==================== bnxt_en: Bug fixes This patchset has the following fixes for bnxt_en: 1. Add missing VNIC ID parameter in the FW message when getting an updated RSS configuration from the FW. 2. Fix a warning when doing ethtool reset on newer chips. 3. Fix VLAN issue on a VF when a default VLAN is assigned. 4. Fix a problem during DPC (Downstream Port containment) scenario. 5. Fix a NULL pointer dereference when receiving a PTP event from FW. 6. Fix VXLAN/Geneve UDP port delete/add with newer FW. ==================== Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Somnath Kotur authored
As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5 ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by:
Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Pavan Chebbi authored
The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
-
Somnath Kotur authored
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by:
-
Sreekanth Reddy authored
Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Pavan Chebbi authored
We must specify the vnic id of the vnic in the input structure of this firmware message. Otherwise we will get an error from the firmware. Fixes: 98a4322b ("bnxt_en: update RSS config using difference algorithm") Reviewed-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - fix a broken sync while rescheduling delayed work, by Vladislav Efanov * tag 'batadv-net-pullrequest-20230607' of git://git.open-mesh.org/linux-merge: batman-adv: Broken sync while rescheduling delayed work ==================== Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.deSigned-off-by:
-
Florian Fainelli authored
We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea ("net: bcmgenet: add EEE support") Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.comSigned-off-by:
-
Jakub Kicinski authored
Flip the netif_carrier_ok() condition in queue wake logic. When I moved it to inside __netif_txq_completed_wake() I missed negating it. This made the condition ineffective and could probably lead to crashes. Fixes: 301f227f ("net: piggy back on the memory barrier in bql when waking queues") Reviewed-by:
-
Jakub Kicinski authored
The down condition should be the negation of the wake condition, IOW when I moved it from: if (cond && wake()) to if (__netif_txq_completed_wake(cond)) Cond should have been negated. Flip it now. This bug leads to occasional crashes with netconsole. It may also lead to queue never waking up in case BQL is not enabled. Reported-by:
David Wei <davidhwei@meta.com> Fixes: 08a09678 ("bnxt: use new queue try_stop/try_wake macros") Reviewed-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-06-07 We've added 7 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 112 insertions(+), 7 deletions(-). The main changes are: 1) Fix a use-after-free in BPF's task local storage, from KP Singh. 2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa. 3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet. 4) UAPI fix for BPF_NETFILTER before final kernel ships, from Florian Westphal. 5) Fix map-in-map array_map_gen_lookup code generation where elem_size was not being set for inner maps, from Rhys Rustad-Elliott. 6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add extra path pointer check to d_path helper selftests/bpf: Fix sockopt_sk selftest bpf: netfilter: Add BPF_NETFILTER bpf_attach_type selftests/bpf: Add access_inner_map selftest bpf: Fix elem_size not being set for inner maps bpf: Fix UAF in task local storage bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready() ==================== Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.netSigned-off-by:
-
Ben Hutchings authored
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after. Fixes: 4e0473f1 ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
-
- 07 Jun, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a fix for unbalanced open count for inhibited input devices - fixups in Elantech PS/2 and Cyppress TTSP v5 drivers - a quirk to soc_button_array driver to make it work with Lenovo Yoga Book X90F / X90L - a removal of erroneous entry from xpad driver * tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - delete a Razer DeathAdder mouse VID/PID entry Input: psmouse - fix OOB access in Elantech protocol Input: soc_button_array - add invalid acpi_index DMI quirk handling Input: fix open count when closing inhibited device Input: cyttsp5 - fix array length
-
Thomas Gleixner authored
This is overdue and an oversight. Add myself to this file deespite the fact that I'm trying to reduce the number of entries in this file which have my name attached, but in the hope that patches wont get picked up elsewhere completely unreviewed and unnoticed. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when creating a file, dir or symlink because the mtime recorded in the afs_operation struct gets passed to the server by the marshalling routines, but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it. This gets masked if a file or directory is subsequently modified. Fix this by filling in op->mtime before calling the create op. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by:
-
Jiri Olsa authored
Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9d ("bpf: Add d_path helper") Reported-by:Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Stanislav Fomichev <sdf@google.com> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org
-
