Merge tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/late

ASPEED device tree updates for 5.19

 - New machine:

    * Nuvia's DC-SCM BMC

 - Enable AST2600 GFX, the BMC-driven graphics device

 - Add a bunch of devices for the AST2600 EVB

 - Updates to the AST2600 Bletchley machine

 - Backwards compatible changes to support the new spi-mem based SPI NOR
   driver

* tag 'aspeed-5.19-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: ast2600-evb: Enable GFX device
  ARM: dts: aspeed: Add GFX node to AST2600
  ARM: dts: aspeed: ast2600-evb: Enable virtual hub
  ARM: dts: aspeed: ast2600-evb: Enable video engine
  ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO
  ARM: dts: aspeed: Add Nuvia DC-SCM BMC
  ARM: dts: aspeed: bletchley: add sample averaging for ADM1278
  ARM: dts: aspeed: bletchley: add eeprom node on each sled
  ARM: dts: aspeed: bletchley: add pca9536 node on each sled
  ARM: dts: aspeed: bletchley: update gpio0 line names
  ARM: dts: aspeed: bletchley: Enable mdio0 bus
  ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc
  ARM: dts: aspeed: bletchley: enable ehci0 device node
  ARM: dts: aspeed: Add USB2.0 device controller node
  ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
  ARM: dts: aspeed: Enable Dual SPI RX transfers
  ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
  ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1

Link: https://lore.kernel.org/r/CACPK8XfUmFxU8Y6C+aZ2+=dT7=fCfs2=2_aYqyRjoXCoeQaUWQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late

Clock properties for cru nodes to match the yaml-converted bindings
and renaming of Quartz-A bluetooth pin nodename to not conflict with
Yaml constraints.

* tag 'v5.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
  arm64: dts: rockchip: add clocks property to cru node rk3368
  arm64: dts: rockchip: add clocks property to cru node rk3308
  arm64: dts: rockchip: add clocks to rk356x cru

Link: https://lore.kernel.org/r/7695907.Sb9uPGUboI@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late

Amba and clock fixes to conform better to actual dt-bindings.

* tag 'v5.19-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add clocks property to cru node rk3228
  ARM: dts: rockchip: add clocks property to cru node rk3036
  ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
  ARM: dts: rockchip: add clocks property to cru node rk3288
  ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
  ARM: dts: rockchip: add clocks property to cru node rv1108

Link: https://lore.kernel.org/r/4798587.jE0xQCEvom@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.19-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/late

Refcount leak for a used of-node in the grf-init.

* tag 'v5.19-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: Fix refcount leak in rockchip_grf_init

Link: https://lore.kernel.org/r/4541398.Icojqenx9y@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The bluetooth binding for the Quartz64 Model A has incorrectly named
host-wakeup and device-wakeup gpios. Rename them to clear some dtbs_check
warnings.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511150117.113070-4-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks and clock-names because the device has to have
at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329180550.31043-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks and clock-names to the rk3308 cru node, because
the device has to have at least one input clock.
Also in case someone wants to add properties that start with
assign-xxx to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
With the addition of new properties also sort the node properties
a little bit.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329184339.1134-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The rk356x cru requires a 24m clock input to function. Add the clocks
properties to the cru to clear some dtbs_check warnings.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511150117.113070-3-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks and clock-names to the rk3228 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks and clock-names to the rk3036 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330114847.18633-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329111323.3569-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks property to rk3288 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329113657.4567-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f3 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").

As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
The node names should be generic, so rename it to "dma-controller".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-3-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add clocks and clock-names to the rv1108 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings.  Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20220516142857.6419-4-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings.  Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings.  Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The kernel test robot found this inconsistency:

>> drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
  'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
     737 | static const struct of_device_id ixp4xx_npe_of_match[] = {

This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.

Fix it by dropping of_match_ptr() around the match.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220523085520.913217-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

... and fix the warning/error:

arch/arm/mach-ep93xx/ts72xx.c:154:13: error: no previous prototype for function 'ts72xx_register_flash' [-Werror,-Wmissing-prototypes]
void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
            ^
arch/arm/mach-ep93xx/ts72xx.c:154:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
^
static
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/lkml/202202140141.HRZ3WZwi-lkp@intel.com/T/
Link: https://lore.kernel.org/r/20220523065616.325052-1-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.

Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late

AT91 DT #2 for 5.19:

- at91: more DT compliance updates for RTC and RTT nodes
- at91: sama7g5: add microphone support

* tag 'at91-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama7g5ek: add node for PDMC0
  ARM: dts: at91: sama7g5: add nodes for PDMC
  ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs
  ARM: dts: at91: Add the required 'atmel, rtt-rtc-time-reg' property

Link: https://lore.kernel.org/r/20220517153252.92393-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-soc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late

AT91 SoC #2 for 5.19:

- One Kconfig fix for random build error

* tag 'at91-soc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: pm: Fix rand build error

Link: https://lore.kernel.org/r/20220517150832.89451-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Avoid return freed memory addresses,Modified to the actual error
return value of clk_register().

Fixes: 9645ccc7 ("ep93xx: clock: convert in-place to COMMON_CLK")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Patch series from Nick Hawkins:

"The GXP is the HPE BMC SoC that is used in the majority of HPE current
 generation servers. Traditionally the asic will last multiple
 generations of server before being replaced.

 Info about SoC:

  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
  A9 core. It is capable of using an AXI bus to which a memory controller
  is attached. It has multiple SPI interfaces to connect boot flash and
  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
  multiple i2c engines to drive connectivity with a host infrastructure.
  The initial patches enable the watchdog and timer enabling the host to
  be able to boot."

* hpe/gxp-soc:
  MAINTAINERS: Introduce HPE GXP Architecture
  ARM: dts: Introduce HPE GXP Device tree
  dt-bindings: arm: hpe: add GXP Support
  dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
  clocksource/drivers/timer-gxp: Add HPE GXP Timer
  watchdog: hpe-wdt: Introduce HPE GXP Watchdog
  ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
  ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "Lots of smaller additions to the defconfig files for both 32-bit and
  64-bit arm platforms, enabling drivers that are now usable on common
  hardware, and a few options to make it possible to boot a file system
  image using systemd"

* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
  ARM: configs: Enable ASoC AC'97 glue
  ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
  ARM: configs: at91: Enable AUTOFS_FS required by systemd
  ARM: configs: at91: Enable options required for systemd
  ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
  ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
  ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
  ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
  ARM: configs: at91: sama7: add xisc and csi2dc
  ARM: multi_v7_defconfig: add atmel video pipeline modules
  ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
  arm64: defconfig: Enable the WM8524 codec driver
  arm64: defconfig: Enable modules for arm displays
  arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
  arm64: defconfig: Enable Renesas RZ/V2M SoC
  arm64: defconfig: Enable ARCH_R9A07G043
  arm64: defconfig: Enable configs for DisplayPort on J721e
  arm64: defconfig: Build Tegra ASRC module
  ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
  arm: mediatek: select arch timer for mt7629
  ...

Pull ARM driver updates from Arnd Bergmann:
 "There are minor updates to SoC specific drivers for chips by Rockchip,
  Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.

  Noteworthy driver changes include:

   - Several conversions of DT bindings to yaml format.

   - Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.

   - Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
     and support for more chips in the RPMh power domains and the
     soc-id.

   - NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.

   - Apple M1 gains support for the on-chip NVMe controller, making it
     possible to finally use the internal disks. This also includes SoC
     drivers for their RTKit IPC and for the SART DMA address filter.

  For other subsystems that merge their drivers through the SoC tree, we
  have

   - Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
     SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
     now has a cache for firmware argument structures as an
     optimization, and SCMI now supports the 3.1 version of the
     specification.

   - Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
     drivers

   - Memory controller updates for Tegra, and a few updates for other
     platforms"

* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
  memory: tegra: Add MC error logging on Tegra186 onward
  memory: tegra: Add memory controller channels support
  memory: tegra: Add APE memory clients for Tegra234
  memory: tegra: Add Tegra234 support
  nvme-apple: fix sparse endianess warnings
  soc/tegra: pmc: Document core domain fields
  soc: qcom: pdr: use static for servreg_* variables
  soc: imx: fix semicolon.cocci warnings
  soc: renesas: R-Car V3U is R-Car Gen4
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc/tegra: pmc: Select REGMAP
  dt-bindings: reset: st,sti-powerdown: Convert to yaml
  dt-bindings: reset: st,sti-picophyreset: Convert to yaml
  dt-bindings: reset: socfpga: Convert to yaml
  dt-bindings: reset: snps,axs10x-reset: Convert to yaml
  ...

Pull ARM DT updates from Arnd Bergmann:
 "There are 40 branches this time, adding a lot of new hardware support,
  and cleanups. Krzysztof Kozlowski continues his treewide cleanups.

  There are a number of new SoCs, all of them as part of existing
  families, and typically added along with a reference board:

   - Renesas RZ/G2UL (R9A07G043) is the single-core version of the
     RZ/G2L general-purpose MPU.

   - Renesas RZ/V2M (R9A09G011) is a smart camera SoC

   - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
     cores and deep learning accerlation.

   - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
     and dual Wifi-6.

   - Corstone1000 is a generic platform from Arm that is used for
     designing custom SoCs, the support for now is for the Fixed Virtual
     Platform emulation for it.

   - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
     upcoming Chromebooks.

   - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
     MMU-less SoC to be added in a while

  New machines based on already supported SoCs this time are mainly for
  32-bit platforms and include:

   - Two wireless routers based on Broadcom bcm4708

   - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
     for the industrial embedded market, and on NXP LS1021A based IOT
     board.

   - Two ethernet switches based on Microchip LAN966

   - Eight Qualcomm Snapdragon based machines, including a smartwatch, a
     Chromebook board and some phones

   - Another phone based on the old ST-Ericsson Ux500 platform

   - Seven STM32MP1 based boards

   - Four single-board computers based on Rockchip RK3566/RK3568"

* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
  ARM: dts: kswitch-d10: enable networking
  ARM: dts: lan966x: add switch node
  ARM: dts: lan966x: add serdes node
  ARM: dts: lan966x: add reset switch reset node
  ARM: dts: lan966x: add MIIM nodes
  ARM: dts: lan966x: add hwmon node
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: rename pinctrl nodes
  ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: turris-omnia: Add atsha204a node
  arm64: dts: mt8192: Follow binding order for SCP registers
  arm64: dts: mediatek: add mtk-snfi for mt7622
  arm64: dts: mediatek: mt8195-demo: enable uart1
  ...

Pull 32-bit ARM SoC updates from Arnd Bergmann:
 "These updates are for platform specific code in arch/arm/, mostly
  fixing minor issues.

  The at91 platform gains support for better power management on the
  lan966 platform and new firmware on the sama5 platform. The mediatek
  soc drivers in turn are enabled for the new mt8195 SoC"

* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: at91: debug: add lan966 support
  ARM: at91: pm: add support for sama5d2 secure suspend
  ARM: at91: add code to handle secure calls
  ARM: at91: Kconfig: implement PIT64B selection
  ARM: at91: pm: add quirks for pm
  ARM: at91: pm: use kernel documentation style
  ARM: at91: pm: introduce macros for pm mode replacement
  ARM: at91: pm: keep documentation inline with structure members
  orion5x: fix typos in comments
  ARM: hisi: Add missing of_node_put after of_find_compatible_node
  ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
  ARM: shmobile: Drop commas after dt_compat sentinels
  soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
  MAINTAINERS: Add Broadcom BCMBCA entry
  arm: bcmbca: add arch bcmbca machine entry
  MAINTAINERS: Broadcom internal lists aren't maintainers
  dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
  soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
  soc: mediatek: add mtk-mutex support for mt8195 vdosys0
  soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
  ...

Use try_cmpxchg64 instead of cmpxchg64 in CMPXCHG_LOOP macro.
x86 CMPXCHG instruction returns success in ZF flag, so this
change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg). The main loop of lockref_get improves from:

  13:	48 89 c1             	mov    %rax,%rcx
  16:	48 c1 f9 20          	sar    $0x20,%rcx
  1a:	83 c1 01             	add    $0x1,%ecx
  1d:	48 89 ce             	mov    %rcx,%rsi
  20:	89 c1                	mov    %eax,%ecx
  22:	48 89 d0             	mov    %rdx,%rax
  25:	48 c1 e6 20          	shl    $0x20,%rsi
  29:	48 09 f1             	or     %rsi,%rcx
  2c:	f0 48 0f b1 4d 00    	lock cmpxchg %rcx,0x0(%rbp)
  32:	48 39 d0             	cmp    %rdx,%rax
  35:	75 17                	jne    4e <lockref_get+0x4e>

to:

  13:	48 89 ca             	mov    %rcx,%rdx
  16:	48 c1 fa 20          	sar    $0x20,%rdx
  1a:	83 c2 01             	add    $0x1,%edx
  1d:	48 89 d6             	mov    %rdx,%rsi
  20:	89 ca                	mov    %ecx,%edx
  22:	48 c1 e6 20          	shl    $0x20,%rsi
  26:	48 09 f2             	or     %rsi,%rdx
  29:	f0 48 0f b1 55 00    	lock cmpxchg %rdx,0x0(%rbp)
  2f:	75 02                	jne    33 <lockref_get+0x33>

[ Michael Ellerman and Mark Rutland confirm that code generation on
  powerpc and arm64 respectively is also ok, even though they do not
  have a native arch_try_cmpxchg() implementation, and rely on the
  default fallback case    - Linus ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: paulmck@linux.vnet.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Dave Chinner:
 "This is a big update with lots of new code. The summary below them
  all, so I'll just touch on teh higlights. The two main new features
  are Large Extent Counts and Logged Attribute Replay - these are two
  new foundational features that we are building more complex future
  features on top of.

  For upcoming functionality, we need to be able to store hundreds of
  millions of xattrs per inode. The Large Extent Count feature removes
  the limits that prevent this scale of xattr storage, and while we were
  modifying the on disk extent count format we also increased the number
  of data extents we support per inode from 2^32 to 2^47.

  We also need to be able to modify xattrs as part of larger atomic
  transactions rather than as standalone transactions. The Logged
  Attribute Replay feature introduces the infrastructure that allows us
  to use intents to record the attribute modifications in the journal
  before we start them, hence allowing other atomic transactions to log
  attribute modification intents and then defer the actual modification
  to later. If we then crash, log recovery then guarantees that the
  attribute is replayed in the context of the atomic transaction that
  logged the intent.

  A significant chunk of the commits in this merge are for the base
  attribute replay functionality along with fixes, improvements and
  cleanups related to this new functioanlity. Allison deserves a big
  round of thanks for her ongoing work to get this functionality into
  XFS.

  There are also many other smaller changes and improvements, so overall
  this is one of the bigger XFS merge requests in some time.

  I will be following up next week with another smaller pull request -
  we already have another round of fixes and improvements to the logged
  attribute replay functionality just about ready to go. They'll soak
  and test over the next week, and I'll send a pull request for them
  near the end of the merge window.

  Summary:

   - support for printk message indexing.

   - large extent counts to provide support for up to 2^47 data extents
     and 2^32 attribute extents, allowing us to scale beyond 4 billion
     data extents to billions of xattrs per inode.

   - conversion of various flags fields to be consistently declared as
     unsigned bit fields.

   - improvements to realtime extent accounting and converts them to
     per-cpu counters to match all the other block and inode accounting.

   - reworks core log formatting code to reduce iterations, have a
     shorter, cleaner fast path and generally be easier to understand
     and maintain.

   - improvements to rmap btree searches that reduce overhead by up to
     30% resulting in xfs_scrub runtime reductions of 15%.

   - improvements to reflink that remove the size limitations in
     remapping operations and greatly reduce the size of transaction
     reservations.

   - reworks the minimum log size calculations to allow us to change
     transaction reservations without changing the minimum supported log
     size.

   - removal of quota warning support as it has never been used on
     Linux.

   - intent whiteouts to allow us to cancel intents that are completed
     entirely in memory rather than having use CPU and disk bandwidth
     formatting and writing them into the journal when it is not
     necessary. This makes rmap, reflink and extent freeing slightly
     more efficient, but provides massive improvements for....

   - Logged Attribute Replay feature support. This is a fundamental
     change to the way we modify attributes, laying the foundation for
     future integration of attribute modifications as part of other
     atomic transactional operations the filesystem performs.

   - Lots of cleanups and fixes for the logged attribute replay
     functionality"

* tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (124 commits)
  xfs: can't use kmem_zalloc() for attribute buffers
  xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify
  xfs: ATTR_REPLACE algorithm with LARP enabled needs rework
  xfs: use XFS_DA_OP flags in deferred attr ops
  xfs: remove xfs_attri_remove_iter
  xfs: switch attr remove to xfs_attri_set_iter
  xfs: introduce attr remove initial states into xfs_attr_set_iter
  xfs: xfs_attr_set_iter() does not need to return EAGAIN
  xfs: clean up final attr removal in xfs_attr_set_iter
  xfs: remote xattr removal in xfs_attr_set_iter() is conditional
  xfs: XFS_DAS_LEAF_REPLACE state only needed if !LARP
  xfs: split remote attr setting out from replace path
  xfs: consolidate leaf/node states in xfs_attr_set_iter
  xfs: kill XFS_DAC_LEAF_ADDNAME_INIT
  xfs: separate out initial attr_set states
  xfs: don't set quota warning values
  xfs: remove warning counters from struct xfs_dquot_res
  xfs: remove quota warning limit from struct xfs_quota_limits
  xfs: rework deferred attribute operation setup
  xfs: make xattri_leaf_bp more useful
  ...

Pull fsnotify updates from Jan Kara:
 "The biggest part of this is support for fsnotify inode marks that
  don't pin inodes in memory but rather get evicted together with the
  inode (they are useful if userspace needs to exclude receipt of events
  from potentially large subtrees using fanotify ignore marks).

  There is also a fix for more consistent handling of events sent to
  parent and a fix of sparse(1) complaints"

* tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: fix incorrect fmode_t casts
  fsnotify: consistent behavior for parent not watching children
  fsnotify: introduce mark type iterator
  fanotify: enable "evictable" inode marks
  fanotify: use fsnotify group lock helpers
  fanotify: implement "evictable" inode marks
  fanotify: factor out helper fanotify_mark_update_flags()
  fanotify: create helper fanotify_mark_user_flags()
  fsnotify: allow adding an inode mark without pinning inode
  dnotify: use fsnotify group lock helpers
  nfsd: use fsnotify group lock helpers
  audit: use fsnotify group lock helpers
  inotify: use fsnotify group lock helpers
  fsnotify: create helpers for group mark_mutex lock
  fsnotify: make allow_dups a property of the group
  fsnotify: pass flags argument to fsnotify_alloc_group()
  fsnotify: fix wrong lockdep annotations
  inotify: move control flags from mask to mark flags
  inotify: show inotify mask flags in proc fdinfo

Pull writeback and ext2 cleanups from Jan Kara:
 "One small ext2 cleanup and one writeback spelling fix"

* tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: fix typo in comment
  fs: ext2: Fix duplicate included linux/dax.h

Pull dma-mapping updates from Christoph Hellwig:

 - don't over-decrypt memory (Robin Murphy)

 - takes min align mask into account for the swiotlb max mapping size
   (Tianyu Lan)

 - use GFP_ATOMIC in dma-debug (Mikulas Patocka)

 - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)

 - don't fail on highmem CMA pages in dma_direct_alloc_pages (me)

 - cleanup swiotlb initialization and share more code with swiotlb-xen
   (me, Stefano Stabellini)

* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
  dma-direct: don't over-decrypt memory
  swiotlb: max mapping size takes min align mask into account
  swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
  swiotlb: use the right nslabs value in swiotlb_init_remap
  swiotlb: don't panic when the swiotlb buffer can't be allocated
  dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
  dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
  swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
  x86: remove cruft from <asm/dma-mapping.h>
  swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
  swiotlb: merge swiotlb-xen initialization into swiotlb
  swiotlb: provide swiotlb_init variants that remap the buffer
  swiotlb: pass a gfp_mask argument to swiotlb_init_late
  swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
  swiotlb: make the swiotlb_init interface more useful
  x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
  x86: remove the IOMMU table infrastructure
  MIPS/octeon: use swiotlb_init instead of open coding it
  arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
  swiotlb: rename swiotlb_late_init_with_default_size
  ...

Pull SCSI updates from James Bottomley:
 "This consists of a small set of driver updates (lpfc, ufs, mpt3sas
  mpi3mr, iscsi target). Apart from that this is mostly small fixes with
  very few core changes (the biggest one being VPD caching)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
  scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
  scsi: elx: efct: Remove NULL check after calling container_of()
  scsi: dpt_i2o: Drop redundant spinlock initialization
  scsi: qedf: Remove redundant variable op
  scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
  scsi: fnic: Replace DMA mask of 64 bits with 47 bits
  scsi: mpi3mr: Add target device related sysfs attributes
  scsi: mpi3mr: Add shost related sysfs attributes
  scsi: elx: efct: Remove redundant memset() statement
  scsi: megaraid_sas: Remove redundant memset() statement
  scsi: mpi3mr: Return error if dma_alloc_coherent() fails
  scsi: hisi_sas: Fix rescan after deleting a disk
  scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
  scsi: libsas: Refactor sas_ata_hard_reset()
  scsi: mpt3sas: Update driver version to 42.100.00.00
  scsi: mpt3sas: Fix junk chars displayed while printing ChipName
  scsi: ipr: Use kobj_to_dev()
  scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
  scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
  scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
  ...

Pull sound updates from Takashi Iwai:
 "Not much dramatic changes at this time, but we've received quite a lot
  of changes for ASoC, while there are still a few fixes and quirks for
  usual HD- and USB-auido. Here are some highlights.

  ASoC:

   - Overhaul of endianness specification for data formats, avoiding
     needless restrictions due to CODECs

   - Initial stages of Intel AVS driver merge

   - Introduction of v4 IPC mechanism for SOF

   - TDM mode support for AK4613

   - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
     MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
     nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780

  Others:

   - A few regression fixes after the USB-audio endpoint management
     refactoring

   - More enhancements for Cirrus HD-audio codec support (still ongoing)

   - Addition of generic serial MIDI driver"

* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
  ALSA: hda/realtek - Add new type for ALC245
  ALSA: usb-audio: Configure sync endpoints before data
  ALSA: ctxfi: fix typo in comment
  ALSA: cs5535audio: fix typo in comment
  ALSA: ctxfi: Add SB046x PCI ID
  ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
  ALSA: usb-audio: Workaround for clock setup on TEAC devices
  ALSA: lola: Bounds check loop iterator against streams array size
  ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
  ASoC: rt1308-sdw: add the default value of register 0xc320
  ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
  ASoC: rt9120: Fix 3byte read, valule offset typo
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
  ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
  ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
  ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
  ASoC: SOF: mediatek: remove duplicate include in mt8195.c
  ASoC: SOF: mediatek: Add mt8195 debug dump
  ASoC: SOF: mediatek: Add mediatek common debug dump
  ...

Pull drm updates from Dave Airlie:
 "Intel have enabled DG2 on certain SKUs for laptops, AMD has started
  some new GPU support, msm has user allocated VA controls

  dma-buf:
   - add dma_resv_replace_fences
   - add dma_resv_get_singleton
   - make dma_excl_fence private

  core:
   - EDID parser refactorings
   - switch drivers to drm_mode_copy/duplicate
   - DRM managed mutex initialization

  display-helper:
   - put HDMI, SCDC, HDCP, DSC and DP into new module

  gem:
   - rework fence handling

  ttm:
   - rework bulk move handling
   - add common debugfs for resource managers
   - convert to kvcalloc

  format helpers:
   - support monochrome formats
   - RGB888, RGB565 to XRGB8888 conversions

  fbdev:
   - cfb/sys_imageblit fixes
   - pagelist corruption fix
   - create offb platform device
   - deferred io improvements

  sysfb:
   - Kconfig rework
   - support for VESA mode selection

  bridge:
   - conversions to devm_drm_of_get_bridge
   - conversions to panel_bridge
   - analogix_dp - autosuspend support
   - it66121 - audio support
   - tc358767 - DSI to DPI support
   - icn6211 - PLL/I2C fixes, DT property
   - adv7611 - enable DRM_BRIDGE_OP_HPD
   - anx7625 - fill ELD if no monitor
   - dw_hdmi - add audio support
   - lontium LT9211 support, i.MXMP LDB
   - it6505: Kconfig fix, DPCD set power fix
   - adv7511 - CEC support for ADV7535

  panel:
   - ltk035c5444t, B133UAN01, NV3052C panel support
   - DataImage FG040346DSSWBG04 support
   - st7735r - DT bindings fix
   - ssd130x - fixes

  i915:
   - DG2 laptop PCI-IDs ("motherboard down")
   - Initial RPL-P PCI IDs
   - compute engine ABI
   - DG2 Tile4 support
   - DG2 CCS clear color compression support
   - DG2 render/media compression formats support
   - ATS-M platform info
   - RPL-S PCI IDs added
   - Bump ADL-P DMC version to v2.16
   - Support static DRRS
   - Support multiple eDP/LVDS native mode refresh rates
   - DP HDR support for HSW+
   - Lots of display refactoring + fixes
   - GuC hwconfig support and query
   - sysfs support for multi-tile
   - fdinfo per-client gpu utilisation
   - add geometry subslices query
   - fix prime mmap with LMEM
   - fix vm open count and remove vma refcounts
   - contiguous allocation fixes
   - steered register write support
   - small PCI BAR enablement
   - GuC error capture support
   - sunset igpu legacy mmap support for newer devices
   - GuC version 70.1.1 support

  amdgpu:
   - Initial SoC21 support
   - SMU 13.x enablement
   - SMU 13.0.4 support
   - ttm_eu cleanups
   - USB-C, GPUVM updates
   - TMZ fixes for RV
   - RAS support for VCN
   - PM sysfs code cleanup
   - DC FP rework
   - extend CG/PG flags to 64-bit
   - SI dpm lockdep fix
   - runtime PM fixes

  amdkfd:
   - RAS/SVM fixes
   - TLB flush fixes
   - CRIU GWS support
   - ignore bogus MEC signals more efficiently

  msm:
   - Fourcc modifier for tiled but not compressed layouts
   - Support for userspace allocated IOVA (GPU virtual address)
   - DPU: DSC (Display Stream Compression) support
   - DP: eDP support
   - DP: conversion to use drm_bridge and drm_bridge_connector
   - Merge DPU1 and MDP5 MDSS driver
   - DPU: writeback support

  nouveau:
   - make some structures static
   - make some variables static
   - switch to drm_gem_plane_helper_prepare_fb

  radeon:
   - misc fixes/cleanups

  mxsfb:
   - rework crtc mode setting
   - LCDIF CRC support

  etnaviv:
   - fencing improvements
   - fix address space collisions
   - cleanup MMU reference handling

  gma500:
   - GEM/GTT improvements
   - connector handling fixes

  komeda:
   - switch to plane reset helper

  mediatek:
   - MIPI DSI improvements

  omapdrm:
   - GEM improvements

  qxl:
   - aarch64 support

  vc4:
   - add a CL submission tracepoint
   - HDMI YUV support
   - HDMI/clock improvements
   - drop is_hdmi caching

  virtio:
   - remove restriction of non-zero blob types

  vmwgfx:
   - support for cursormob and cursorbypass 4
   - fence improvements

  tidss:
   - reset DISPC on startup

  solomon:
   - SPI support
   - DT improvements

  sun4i:
   - allwinner D1 support
   - drop is_hdmi caching

  imx:
   - use swap() instead of open-coding
   - use devm_platform_ioremap_resource
   - remove redunant initializations

  ast:
   - Displayport support

  rockchip:
   - Refactor IOMMU initialisation
   - make some structures static
   - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
   - support swapped YUV formats,
   - clock improvements
   - rk3568 support
   - VOP2 support

  mediatek:
   - MT8186 support

  tegra:
   - debugabillity improvements"

* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
  drm/i915/dsi: fix VBT send packet port selection for ICL+
  drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
  drm/i915/reg: fix undefined behavior due to shift overflowing the constant
  drm/i915/gt: Fix use of static in macro mismatch
  drm/i915/audio: fix audio code enable/disable pipe logging
  drm/i915: Fix CFI violation with show_dynamic_id()
  drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
  drm/i915/gt: Fix build error without CONFIG_PM
  drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
  drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
  drm/msm: don't free the IRQ if it was not requested
  drm/msm/dpu: limit writeback modes according to max_linewidth
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/amdgpu: Unmap legacy queue when MES is enabled
  drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
  drm/msm: Fix fb plane offset calculation
  drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
  drm/msm/dsi: don't powerup at modeset time for parade-ps8640
  drm/rockchip: Change register space names in vop2
  dt-bindings: display: rockchip: make reg-names mandatory for VOP2
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
     qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
     props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
     Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
     fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
     zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers

   - Convert various Arm Ltd peripheral IP bindings to schemas

   - New bindings for Menlo board CPLD, DH electronics board CPLD,
     Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
     GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
     Microchip/SMSC LAN95xx USB Ethernet controllers

   - Add vendor prefix for Enclustra

   - Add various compatible string additions

   - Various example fixes and cleanups

   - Remove unused hisilicon,hi6220-reset binding

   - Treewide fix properties missing type definition

   - Drop some empty and unreferenced .txt bindings

   - Documentation improvements for writing schemas

  DT driver core:

   - Drop static IRQ resources for DT platform devices as IRQ setup is
     dynamic and drivers have all been converted to use
     platform_get_irq() and friends

   - Rework memory allocations and frees for overlays

   - Continue overlay notifier callbacks on successful calls and add
     unittests

   - Handle 'interrupts-extended' in early DT IRQ setup

   - Fix of_property_read_string() errors to match documentation

   - Ignore disabled nodes in FDT API calls"

* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
  of/irq: fix typo in comment
  dt-bindings: Fix properties without any type
  Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
  dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
  dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
  dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
  dt-bindings: timer: cdns,ttc: drop unneeded minItems
  dt-bindings: mailbox: zynqmp_ipi: convert to yaml
  dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  dt-bindings: net: add schema for ASIX USB Ethernet controllers
  of/fdt: Ignore disabled memory nodes
  dt-bindings: arm: fix typos in compatible
  dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
  dt-bindings: display: convert Arm Komeda to DT schema
  dt-bindings: display: convert Arm Mali-DP to DT schema
  dt-bindings: display: convert Arm HDLCD to DT schema
  dt-bindings: display: convert PL110/PL111 to DT schema
  dt-bindings: arm: convert vexpress-config to DT schema
  dt-bindings: arm: convert vexpress-sysregs to DT schema
  ...

Merge tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Intel PT:

   - Allow hardware tracing on KVM test programs. In this case, the VM
     is not running an OS, but only the functions loaded into it by the
     hypervisor test program, and conveniently, loaded at the same
     virtual addresses.

   - Improve documentation:
      - Add link to perf wiki's page

   - Cleanups:
      - Delete now unused perf-with-kcore.sh script
      - Remove unused machines__find_host()

  ARM SPE (Statistical Profile Extensions):

   - Add man page entry.

  Vendor Events:

   - Update various Intel event topics

   - Update various microarch events

   - Fix various cstate metrics

   - Fix Alderlake metric groups

   - Add sapphirerapids events

   - Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75,
     A77, A78, A710, X1, X2 and Neoverse E1

   - Update Cortex A57/A72

  perf stat:

   - Introduce stats for the user and system rusage times

  perf c2c:

   - Prep work to support ARM systems

  perf annotate:

   - Add --percent-limit option

  perf lock:

   - Add -t/--thread option for report

   - Do not discard broken lock stats

  perf bench:

   - Add breakpoint benchmarks

  perf test:

   - Limit to only run executable scripts in tests

   - Add basic perf record tests

   - Add stat record+report test

   - Add basic stat and topdown group test

   - Skip several tests when the user hasn't permission to perform them

   - Fix test case 81 ("perf record tests") on s390x

  perf version:

   - debuginfod support improvements

  perf scripting python:

   - Expose symbol offset and source information

  perf build:

   - Error for BPF skeletons without LIBBPF

   - Use Python devtools for version autodetection rather than runtime

  Miscellaneous:

   - Add riscv64 support to 'perf jitdump'

   - Various fixes/tidy ups related to cpu_map

   - Fixes for handling Intel hybrid systems"

* tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits)
  perf intel-pt: Add guest_code support
  perf kvm report: Add guest_code support
  perf script: Add guest_code support
  perf tools: Add guest_code support
  perf tools: Factor out thread__set_guest_comm()
  perf tools: Add machine to machines back pointer
  perf vendors events arm64: Update Cortex A57/A72
  perf vendors events arm64: Arm Neoverse E1
  perf vendors events arm64: Arm Cortex-X2
  perf vendors events arm64: Arm Cortex-X1
  perf vendors events arm64: Arm Cortex-A710
  perf vendors events arm64: Arm Cortex-A78
  perf vendors events arm64: Arm Cortex-A77
  perf vendors events arm64: Arm Cortex-A75
  perf vendors events arm64: Arm Cortex-A73
  perf vendors events arm64: Arm Cortex-A65
  perf vendors events arm64: Arm Cortex-A510
  perf vendors events arm64: Arm Cortex-A55
  perf vendors events arm64: Arm Cortex-A35
  perf vendors events arm64: Arm Cortex-A34
  ...