- 30 Jun, 2020 40 commits
-
-
Alexander Lobakin authored
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Lobakin authored
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Correct already existing but wrong SPDX tags to match the actual license. Signed-off-by:
-
Alexander Lobakin authored
Set the actual copyright holder and years in all qed source files. Signed-off-by:
-
Alexander Lobakin authored
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by:
-
Alexander Lobakin authored
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Correct already existing but wrong SPDX tags to match the actual license. Signed-off-by:
-
Yousuk Seung authored
When skb is coalesced tcp_ack_tstamp() still needs to be called when not fully acked in tcp_clean_rtx_queue(), otherwise SCM_TSTAMP_ACK timestamps may never be fired. Since the original patch series had dependent commits, this patch fixes the issue instead of reverting by restoring calls to tcp_ack_tstamp() when skb is not fully acked. Fixes: fdb7eb21 ("tcp: stamp SCM_TSTAMP_ACK later in tcp_clean_rtx_queue()") Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Colin Ian King authored
The error return path when create_singlethread_workqueue fails currently does not kfree tls and leads to a memory leak. Fix this by kfree'ing tls before returning -ENOMEM. Addresses-Coverity: ("Resource leak") Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
This clean-up the code a bit, reduces the number of used hooks and indirect call requested, and allow better error reporting from __mptcp_subflow_connect() Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
Left shifting the u16 value promotes it to a int and then it gets sign extended to a u64. If len << 16 is greater than 0x7fffffff then the upper bits get set to 1 because of the implicit sign extension. Fix this by casting len to u64 before shifting it. Addresses-Coverity: ("integer handling issues") Fixes: ed9b7646 ("net/tls: Add asynchronous resync") Signed-off-by: -
David S. Miller authored
Edward Cree says: ==================== sfc: prerequisites for EF100 driver, part 2 Continuing on from [1], this series further prepares the sfc codebase for the introduction of the EF100 driver. [1]: https://lore.kernel.org/netdev/20200629.173812.1532344417590172093.davem@davemloft.net/T/ ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Edward Cree authored
EF100 won't have an efx->type->tx_remove method, because there's nothing for it to do. So make the call conditional. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
Saves a whole #include from nic.c. Signed-off-by:
-
Edward Cree authored
ef100 will need to check this against NIC limits. Signed-off-by:
-
Edward Cree authored
Define it in nic_common.h, even though the ef100 driver will have a different implementation backing it (actually a WARN_ON_ONCE as it should never get called by ef100. But it needs to still exist because common TX path code references it). Signed-off-by:
-
Edward Cree authored
ef100 will need this if it gets GSO skbs it can't handle (e.g. too long header length). Signed-off-by:
-
Edward Cree authored
The ef100 RX path will also need to DMA-sync RX buffers. Signed-off-by:
-
Edward Cree authored
Refactor it a little as we go, and introduce efx_mcdi_set_mtu() which we will later use for ef100 to change MTU without touching other MAC settings. Signed-off-by:
-
Edward Cree authored
Various left-over bits and pieces from efx.c that are needed by ef100. Signed-off-by:
-
Edward Cree authored
Both the licence notice and the SPDX tag were missing from this file. Signed-off-by:
-
Edward Cree authored
Most of it was already declared in mcdi_port_common.h, so just move the implementations to mcdi_port_common.c. Signed-off-by:
-
Edward Cree authored
These functions are implemented in mcdi_port.c, which will not be linked into the EF100 driver; thus their prototypes should not be visible in common header files. Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== Convert Broadcom SF2 to mac_link_up() resolved state Convert Broadcom SF2 DSA support to use the newly provided resolved link state via mac_link_up() rather than using the state in mac_config(). ==================== Signed-off-by: -
Russell King authored
bcm_sf2 only appears to support pause modes on RGMII interfaces (the enable bits are in the RGMII control register.) Setup the pause modes for RGMII connections. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
Convert the bcm_sf2 to use the finalised speed and duplex in its mac_link_up() call rather than the parameters in mac_config(). Reviewed-by:
-
Russell King authored
state->link has never been valid in mac_config() implementations - while it may be correct in some calls, it is not true that it can be relied upon. Fix bcm_sf2 to use the correct method of handling forced link status. Reviewed-by:
-
David S. Miller authored
Russell King says: ==================== Convert Broadcom B53 to mac_link_up() resolved state These two patches update the Broadcom B53 DSA support to use the newly provided resolved link state via mac_link_up() rather than using the state in mac_config(). ==================== Signed-off-by: -
Russell King authored
Convert the B53 driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). This is just a matter of moving the call to b53_force_port_config(). Reviewed-by:
-
Russell King authored
Replace the b53_force_port_config() pause argument, which is based on phylink's MLO_PAUSE_* definitions, to use a pair of booleans. This will allow us to move b53_force_port_config() from b53_phylink_mac_config() to b53_phylink_mac_link_up(). Reviewed-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - update mailing list URL, by Sven Eckelmann - fix typos and grammar in documentation, by Sven Eckelmann - introduce a configurable per interface hop penalty, by Linus Luessing ==================== Signed-off-by: -
Florian Fainelli authored
It is not very informative to know the DSA master device when a subordinate network device fails to get its PHY setup. Provide the device name and capitalize PHY while we are it. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Luo bin authored
remove unused but set variable to avoid auto build test WARNING Signed-off-by:
Luo bin <luobin9@huawei.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-06-29 This series contains updates to only the igc driver. Sasha added Energy Efficient Ethernet (EEE) support and Latency Tolerance Reporting (LTR) support for the igc driver. Added Low Power Idle (LPI) counters and cleaned up unused TCP segmentation counters. Removed igc_power_down_link() and call igc_power_down_phy_copper_base() directly. Removed unneeded copper media check. Andre cleaned up timestamping by removing un-supported features and duplicate code for i225. Fixed the timestamp check on the proper flag instead of the skb for pending transmit timestamps. Refactored igc_ptp_set_timestamp_mode() to simply the flow. v2: Removed the log message in patch 1 as suggested by David Miller. Note: The locking issue Jakub Kicinski saw in patch 5, currently exists in the current net-next tree, so Andre will resolve the locking issue in a follow-on patch. ==================== Signed-off-by: -
Sasha Neftin authored
i225 device support only copper mode. There is no point to check media type in the igc_config_fc_after_link_up() method. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sasha Neftin authored
PHY of the i225 device support only copper mode. There is no point to check media type in the igc_power_up_link() method. Signed-off-by:
-
Sasha Neftin authored
Currently the implementation of igc_power_down_link() method was just calling igc_power_down_phy_copper_base() method. We can just call igc_power_down_phy_copper_base() method directly. Signed-off-by:
-
Sasha Neftin authored
TCP segmentation TX context fail counter is not applicable for i225 devices. This patch comes to clean up this counter. Signed-off-by:
-
Sasha Neftin authored
Add EEE TX LPI and EEE RX LPI counters. A EEE TX LPI event occurs when the transmitter enters EEE (IEEE 802.3az) LPI state. A EEE RX LPI event occurs when the receiver detect link partner entry into EEE(IEEE 802.3az) LPI state. Signed-off-by:
-
