- 15 Aug, 2023 6 commits
-
-
Jakub Kicinski authored
Since dumps carry struct genl_info now, use the attrs pointer from genl_info and remove the one in struct genl_dumpit_info. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Netlink GET implementations must currently juggle struct genl_info and struct netlink_callback, depending on whether they were called from doit or dumpit. Add genl_info to the dump state and populate the fields. This way implementations can simply pass struct genl_info around. Reviewed-by:
-
Jakub Kicinski authored
Only three families use info->userhdr today and going forward we discourage using fixed headers in new families. So having the pointer to user header in struct genl_info is an overkill. Compute the header pointer at runtime. Reviewed-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
struct netlink_callback has a const nlh pointer, make the pointer in struct genl_info const as well, to make copying between the two easier. Reviewed-by:
-
Jakub Kicinski authored
Add helpers which take/release the genl mutex based on family->parallel_ops. Remove the separation between handling of ops in locked and parallel families. Future patches would make the duplicated code grow even more. Reviewed-by:
-
Russell King (Oracle) authored
Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch. This is a fast ethernet switch, with internal PHYs for ports 0 through 4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports MII, REVMII, REVRMII and SNI without an internal PHY. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1qUkx7-003dMX-9b@rmk-PC.armlinux.org.ukSigned-off-by:
-
- 14 Aug, 2023 34 commits
-
-
Jakub Kicinski authored
Jiri Pirko says: ==================== devlink: introduce selective dumps Motivation: For SFs, one devlink instance per SF is created. There might be thousands of these on a single host. When a user needs to know port handle for specific SF, he needs to dump all devlink ports on the host which does not scale good. Solution: Allow user to pass devlink handle (and possibly other attributes) alongside the dump command and dump only objects which are matching the selection. Use split ops to generate policies for dump callbacks acccording to the attributes used for selection. The userspace can use ctrl genetlink GET_POLICY command to find out if the selective dumps are supported by kernel for particular command. Example: $ devlink port show auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false $ devlink port show auxiliary/mlx5_core.eth.0 auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false $ devlink port show auxiliary/mlx5_core.eth.1 auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false Extension: patches #12 and #13 extends selection attributes by port index for health reporter dumping. ==================== Link: https://lore.kernel.org/r/20230811155714.1736405-1-jiri@resnulli.usSigned-off-by:
-
Jiri Pirko authored
Allow user to pass port index for health reporter dump request. Re-generate the related code. Signed-off-by:
-
Jiri Pirko authored
Introduce a possibility for devlink object to expose attributes it supports for selection of dumped objects. Use this by health reporter to indicate it supports port index based selection of dump objects. Implement this selection mechanism in devlink_nl_cmd_health_reporter_get_dump_one() Example: $ devlink health pci/0000:08:00.0: reporter fw state healthy error 0 recover 0 auto_dump true reporter fw_fatal state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32768: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32769: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32770: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.1: reporter fw state healthy error 0 recover 0 auto_dump true reporter fw_fatal state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true reporter vnic state healthy error 0 recover 0 pci/0000:08:00.1/98304: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.1/98305: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.1/98306: reporter vnic state healthy error 0 recover 0 $ devlink health show pci/0000:08:00.0 pci/0000:08:00.0: reporter fw state healthy error 0 recover 0 auto_dump true reporter fw_fatal state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32768: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32769: reporter vnic state healthy error 0 recover 0 pci/0000:08:00.0/32770: reporter vnic state healthy error 0 recover 0 $ devlink health show pci/0000:08:00.0/32768 pci/0000:08:00.0/32768: reporter vnic state healthy error 0 recover 0 The last command is possible because of this patch. Signed-off-by: -
Jiri Pirko authored
Extend per-instance dump command definitions to accept instance attributes. Allow parsing of devlink handle attributes so they could be used for instance selection. Re-generate the related code. Signed-off-by:
-
Jiri Pirko authored
For SFs, one devlink instance per SF is created. There might be thousands of these on a single host. When a user needs to know port handle for specific SF, he needs to dump all devlink ports on the host which does not scale good. Allow user to pass devlink handle attributes alongside the dump command and dump only objects which are under selected devlink instance. Example: $ devlink port show auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false $ devlink port show auxiliary/mlx5_core.eth.0 auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false $ devlink port show auxiliary/mlx5_core.eth.1 auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false Signed-off-by:
-
Jiri Pirko authored
As the commands are already defined in split ops, remove them from small ops. Signed-off-by:
-
Jiri Pirko authored
Remove the duplicate temporary netlink callback prototype as the generated ones are already in place. Signed-off-by:
-
Jiri Pirko authored
Add the definitions for the commands that do per-instance dump and re-generate the related code. Signed-off-by:
-
Jiri Pirko authored
In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the flags as an arg of dump_one() callback. Currently, it is always NLM_F_MULTI. Signed-off-by:
-
Jiri Pirko authored
Introduce dumpit callbacks for generated split ops. Have them as a thin wrapper around iteration function and allow to pass dump_one() function pointer directly without need to store in devlink_cmd structs. Note that the function prototypes are temporary until the generated ones will replace them in a follow-up patch. Signed-off-by:
-
Jiri Pirko authored
Rename netlink doit callback functions for the commands that do implement per-instance dump to match the generated names that are going to be introduce in the follow-up patch. Note that the function prototypes are temporary until the generated ones will replace them in a follow-up patch. Signed-off-by:
-
Jiri Pirko authored
Define port handling helpers what don't rely on internal_flags. Have __devlink_nl_pre_doit() to accept the flags as a function arg and make devlink_nl_pre_doit() a wrapper helper function calling it. Introduce new helpers devlink_nl_pre_doit_port() and devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up patch. Note that the function prototypes are temporary until the generated ones will replace them in a follow-up patch. Signed-off-by:
-
Jiri Pirko authored
No need to give the rate any special treatment in netlink attributes parsing, as unlike for ports, there is only a couple of commands benefiting from that. Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler by moving the rate attributes parsing to rate_*_doit() ops. Signed-off-by:
-
Jiri Pirko authored
No need to give the linecards any special treatment in netlink attribute parsing, as unlike for ports, there is only a couple of commands benefiting from that. Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler by moving the linecard attribute parsing to linecard_[gs]et_doit() ops. Signed-off-by:
-
Gabor Juhos authored
The PSGMII interface is similar to QSGMII. The main difference is that the PSGMII interface combines five SGMII lines into a single link while in QSGMII only four lines are combined. Similarly to the QSGMII, this interface mode might also needs special handling within the MAC driver. It is commonly used by Qualcomm with their QCA807x PHY series and modern WiSoC-s. Add definitions for the PHY layer to allow to express this type of connection between the MAC and PHY. Signed-off-by:
Gabor Juhos <j4g8y7@gmail.com> Signed-off-by:
Robert Marko <robert.marko@sartura.hr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Marko authored
Add a new PSGMII mode which is similar to QSGMII with the difference being that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. It is commonly used by Qualcomm on their QCA807x PHY series. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Support traffic redirection from a locked bridge port Ido Schimmel writes: It is possible to add a filter that redirects traffic from the ingress of a bridge port that is locked (i.e., performs security / SMAC lookup) and has learning enabled. For example: # ip link add name br0 type bridge # ip link set dev swp1 master br0 # bridge link set dev swp1 learning on locked on mab on # tc qdisc add dev swp1 clsact # tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2 In the kernel's Rx path, this filter is evaluated before the Rx handler of the bridge, which means that redirected traffic should not be affected by bridge port configuration such as learning. However, the hardware data path is a bit different and the redirect action (FORWARDING_ACTION in hardware) merely attaches a pointer to the packet, which is later used by the L2 lookup stage to understand how to forward the packet. Between both stages - ingress ACL and L2 lookup - learning and security lookup are performed, which means that redirected traffic is affected by bridge port configuration, unlike in the kernel's data path. The learning discrepancy was handled in commit 577fa14d ("mlxsw: spectrum: Do not process learned records with a dummy FID") by simply ignoring learning notifications generated by the redirected traffic. A similar solution is not possible for the security / SMAC lookup since - unlike learning - the CPU is not involved and packets that failed the lookup are dropped by the device. Instead, solve this by prepending the ignore action to the redirect action and use it to instruct the device to disable both learning and the security / SMAC lookup for redirected traffic. Patch #1 adds the ignore action. Patch #2 prepends the action to the redirect action in flower offload code. Patch #3 removes the workaround in commit 577fa14d ("mlxsw: spectrum: Do not process learned records with a dummy FID") since it is no longer needed. Patch #4 adds a test case. ==================== Signed-off-by:
-
Ido Schimmel authored
Check that traffic can be redirected from a locked bridge port and that it does not create locked FDB entries. Cc: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
As explained in the previous patch, with the ignore action prepended to the redirect action, it is not longer possible for redirected traffic to generate learning notifications. Therefore, remove the workaround that was added in commit 577fa14d ("mlxsw: spectrum: Do not process learned records with a dummy FID") as it is no longer needed. Signed-off-by:
-
Ido Schimmel authored
It is possible to add a filter that redirects traffic from the ingress of a bridge port that is locked (i.e., performs security / SMAC lookup) and has learning enabled. For example: # ip link add name br0 type bridge # ip link set dev swp1 master br0 # bridge link set dev swp1 learning on locked on mab on # tc qdisc add dev swp1 clsact # tc filter add dev swp1 ingress pref 1 proto ip flower skip_sw src_ip 192.0.2.1 action mirred egress redirect dev swp2 In the kernel's Rx path, this filter is evaluated before the Rx handler of the bridge, which means that redirected traffic should not be affected by bridge port configuration such as learning. However, the hardware data path is a bit different and the redirect action (FORWARDING_ACTION in hardware) merely attaches a pointer to the packet, which is later used by the L2 lookup stage to understand how to forward the packet. Between both stages - ingress ACL and L2 lookup - learning and security lookup are performed, which means that redirected traffic is affected by bridge port configuration, unlike in the kernel's data path. The learning discrepancy was handled in commit 577fa14d ("mlxsw: spectrum: Do not process learned records with a dummy FID") by simply ignoring learning notifications generated by the redirected traffic. A similar solution is not possible for the security / SMAC lookup since - unlike learning - the CPU is not involved and packets that failed the lookup are dropped by the device. Instead, solve this by prepending the ignore action to the redirect action and use it to instruct the device to disable both learning and the security / SMAC lookup for redirected traffic. Signed-off-by:
-
Ido Schimmel authored
Add the IGNORE_ACTION which is used to ignore basic switching functions such as learning on a per-packet basis. The action will be prepended to the FORWARDING_ACTION in subsequent patches. Signed-off-by:
-
Furong Xu authored
1. Show TSSTSSEL(Timestamp System Time Source), ADDMACADRSEL(additional MAC addresses), SMASEL(SMA/MDIO Interface), HDSEL(Half-duplex Support) in debugfs. 2. Show exact number of additional MAC address registers for XGMAC2 core. 3. XGMAC2 core does not have different IP checksum offload types, so just show rx_coe instead of rx_coe_type1 or rx_coe_type2. 4. XGMAC2 core does not have rxfifo_over_2048 definition, skip it. Signed-off-by:
Furong Xu <0x1207@gmail.com> Signed-off-by:
-
David S. Miller authored
Li Zetao says: ==================== Use helper functions to update stats The patch set uses the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which is the same as implementing the function separately. ==================== Signed-off-by: -
Li Zetao authored
Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by:
Li Zetao <lizetao1@huawei.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Li Zetao authored
Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
William Tu authored
The patch adds native-mode XDP support: XDP DROP, PASS, TX, and REDIRECT. Background: The vmxnet3 rx consists of three rings: ring0, ring1, and dataring. For r0 and r1, buffers at r0 are allocated using alloc_skb APIs and dma mapped to the ring's descriptor. If LRO is enabled and packet size larger than 3K, VMXNET3_MAX_SKB_BUF_SIZE, then r1 is used to mapped the rest of the buffer larger than VMXNET3_MAX_SKB_BUF_SIZE. Each buffer in r1 is allocated using alloc_page. So for LRO packets, the payload will be in one buffer from r0 and multiple from r1, for non-LRO packets, only one descriptor in r0 is used for packet size less than 3k. When receiving a packet, the first descriptor will have the sop (start of packet) bit set, and the last descriptor will have the eop (end of packet) bit set. Non-LRO packets will have only one descriptor with both sop and eop set. Other than r0 and r1, vmxnet3 dataring is specifically designed for handling packets with small size, usually 128 bytes, defined in VMXNET3_DEF_RXDATA_DESC_SIZE, by simply copying the packet from the backend driver in ESXi to the ring's memory region at front-end vmxnet3 driver, in order to avoid memory mapping/unmapping overhead. In summary, packet size: A. < 128B: use dataring B. 128B - 3K: use ring0 (VMXNET3_RX_BUF_SKB) C. > 3K: use ring0 and ring1 (VMXNET3_RX_BUF_SKB + VMXNET3_RX_BUF_PAGE) As a result, the patch adds XDP support for packets using dataring and r0 (case A and B), not the large packet size when LRO is enabled. XDP Implementation: When user loads and XDP prog, vmxnet3 driver checks configurations, such as mtu, lro, and re-allocate the rx buffer size for reserving the extra headroom, XDP_PACKET_HEADROOM, for XDP frame. The XDP prog will then be associated with every rx queue of the device. Note that when using dataring for small packet size, vmxnet3 (front-end driver) doesn't control the buffer allocation, as a result we allocate a new page and copy packet from the dataring to XDP frame. The receive side of XDP is implemented for case A and B, by invoking the bpf program at vmxnet3_rq_rx_complete and handle its returned action. The vmxnet3_process_xdp(), vmxnet3_process_xdp_small() function handles the ring0 and dataring case separately, and decides the next journey of the packet afterward. For TX, vmxnet3 has split header design. Outgoing packets are parsed first and protocol headers (L2/L3/L4) are copied to the backend. The rest of the payload are dma mapped. Since XDP_TX does not parse the packet protocol, the entire XDP frame is dma mapped for transmission and transmitted in a batch. Later on, the frame is freed and recycled back to the memory pool. Performance: Tested using two VMs inside one ESXi vSphere 7.0 machine, using single core on each vmxnet3 device, sender using DPDK testpmd tx-mode attached to vmxnet3 device, sending 64B or 512B UDP packet. VM1 txgen: $ dpdk-testpmd -l 0-3 -n 1 -- -i --nb-cores=3 \ --forward-mode=txonly --eth-peer=0,<mac addr of vm2> option: add "--txonly-multi-flow" option: use --txpkts=512 or 64 byte VM2 running XDP: $ ./samples/bpf/xdp_rxq_info -d ens160 -a <options> --skb-mode $ ./samples/bpf/xdp_rxq_info -d ens160 -a <options> options: XDP_DROP, XDP_PASS, XDP_TX To test REDIRECT to cpu 0, use $ ./samples/bpf/xdp_redirect_cpu -d ens160 -c 0 -e drop Single core performance comparison with skb-mode. 64B: skb-mode -> native-mode XDP_DROP: 1.6Mpps -> 2.4Mpps XDP_PASS: 338Kpps -> 367Kpps XDP_TX: 1.1Mpps -> 2.3Mpps REDIRECT-drop: 1.3Mpps -> 2.3Mpps 512B: skb-mode -> native-mode XDP_DROP: 863Kpps -> 1.3Mpps XDP_PASS: 275Kpps -> 376Kpps XDP_TX: 554Kpps -> 1.2Mpps REDIRECT-drop: 659Kpps -> 1.2Mpps Demo: https://youtu.be/4lm1CSCi78Q Future work: - XDP frag support - use napi_consume_skb() instead of dev_kfree_skb_any at unmap - stats using u64_stats_t - using bitfield macro BIT() - optimization for DMA synchronization using actual frame length, instead of always max_len Signed-off-by:William Tu <u9012063@gmail.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by:
-
David S. Miller authored
Adrian Moreno says: ==================== openvswitch: add drop reasons There is currently a gap in drop visibility in the openvswitch module. This series tries to improve this by adding a new drop reason subsystem for OVS. Apart from adding a new drop reasson subsystem and some common drop reasons, this series takes Eric's preliminary work [1] on adding an explicit drop action and integrates it into the same subsystem. A limitation of this series is that it does not report upcall errors. The reason is that there could be many sources of upcall drops and the most common one, which is the netlink buffer overflow, cannot be reported via kfree_skb() because the skb is freed in the netlink layer (see [2]). Therefore, using a reason for the rare events and not the common one would be even more misleading. I'd propose we add (in a follow up patch) a tracepoint to better report upcall errors. [1] https://lore.kernel.org/netdev/202306300609.tdRdZscy-lkp@intel.com/T/ [2] commit 1100248a ("openvswitch: Fix double reporting of drops in dropwatch") --- v4 -> v5: - Rebased - Added a helper function to explicitly convert drop reason enum types v3 -> v4: - Changed names of errors following Ilya's suggestions - Moved the ovs-dpctl.py changes from patch 7/7 to 3/7 - Added a test to ensure actions following a drop are rejected rfc2 -> v3: - Rebased on top of latest net-next rfc1 -> rfc2: - Fail when an explicit drop is not the last - Added a drop reason for action errors - Added braces around macros - Dropped patch that added support for masks in ovs-dpctl.py as it's now included in Aaron's series [2]. ==================== Signed-off-by:
-
Adrian Moreno authored
Test explicit drops generate the right drop reason. Also, verify that the kernel rejects flows with actions following an explicit drop. Acked-by:
Adrian Moreno <amorenoz@redhat.com> Signed-off-by:
-
Adrian Moreno authored
Test if the correct drop reason is reported when OVS drops a packet due to an explicit flow. Acked-by:
-
Adrian Moreno authored
Use drop reasons from include/net/dropreason-core.h when a reasonable candidate exists. Acked-by:
-
Adrian Moreno authored
By using an independent drop reason it makes it easy to distinguish between QoS-triggered or flow-triggered drop. Acked-by:
-
Eric Garver authored
From: Eric Garver <eric@garver.life> This adds an explicit drop action. This is used by OVS to drop packets for which it cannot determine what to do. An explicit action in the kernel allows passing the reason _why_ the packet is being dropped or zero to indicate no particular error happened (i.e: OVS intentionally dropped the packet). Since the error codes coming from userspace mean nothing for the kernel, we squash all of them into only two drop reasons: - OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed - OVS_DROP_EXPLICIT to indicate a zero value was passed (no error) e.g. trace all OVS dropped skbs # perf trace -e skb:kfree_skb --filter="reason >= 0x30000" [..] 106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \ location:0xffffffffc0d9b462, protocol: 2048, reason: 196611) reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT) Also, this patch allows ovs-dpctl.py to add explicit drop actions as: "drop" -> implicit empty-action drop "drop(0)" -> explicit non-error action drop "drop(42)" -> explicit error action drop Signed-off-by:
Eric Garver <eric@garver.life> Co-developed-by:
-
Adrian Moreno authored
Add a drop reason for packets that are dropped because an action returns a non-zero error code. Acked-by:
-
Adrian Moreno authored
Create a new drop reason subsystem for openvswitch and add the first drop reason to represent last-action drops. Last-action drops happen when a flow has an empty action list or there is no action that consumes the packet (output, userspace, recirc, etc). It is the most common way in which OVS drops packets. Implementation-wise, most of these skb-consuming actions already call "consume_skb" internally and return directly from within the do_execute_actions() loop so with minimal changes we can assume that any skb that exits the loop normally is a packet drop. Signed-off-by:
-
