Pull s390 updates from Martin Schwidefsky:

 - Add the CPU id for the new z13s machine

 - Add a s390 specific XOR template for RAID-5 checksumming based on the
   XC instruction.  Remove all other alternatives, XC is always faster

 - The merge of our four different stack tracers into a single one

 - Tidy up the code related to page tables, several large inline
   functions are now out-of-line.  Bloat-o-meter reports ~11K text size
   reduction

 - A binary interface for the priviledged CLP instruction to retrieve
   the hardware view of the installed PCI functions

 - Improvements for the dasd format code

 - Bug fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  s390/pci: enforce fmb page boundary rule
  s390: fix floating pointer register corruption (again)
  s390/cpumf: add missing lpp magic initialization
  s390: Fix misspellings in comments
  s390/mm: split arch/s390/mm/pgtable.c
  s390/mm: uninline pmdp_xxx functions from pgtable.h
  s390/mm: uninline ptep_xxx functions from pgtable.h
  s390/pci: add ioctl interface for CLP
  s390: Use pr_warn instead of pr_warning
  s390/dasd: remove casts to dasd_*_private
  s390/dasd: Refactor dasd format functions
  s390/dasd: Simplify code in format logic
  s390/dasd: Improve dasd format code
  s390/percpu: remove this_cpu_cmpxchg_double_4
  s390/cpumf: Improve guest detection heuristics
  s390/fault: merge report_user_fault implementations
  s390/dis: use correct escape sequence for '%' character
  s390/kvm: simplify set_guest_storage_key
  s390/oprofile: add z13/z13s model numbers
  s390: add z13s model number to z13 elf platform
  ...

Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: fix asm operand constraint in cmpxchg()
  avr32: wire up copy_file_range syscall

Pull KVM updates from Paolo Bonzini:
 "One of the largest releases for KVM...  Hardly any generic
  changes, but lots of architecture-specific updates.

  ARM:
   - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
   - PMU support for guests
   - 32bit world switch rewritten in C
   - various optimizations to the vgic save/restore code.

  PPC:
   - enabled KVM-VFIO integration ("VFIO device")
   - optimizations to speed up IPIs between vcpus
   - in-kernel handling of IOMMU hypercalls
   - support for dynamic DMA windows (DDW).

  s390:
   - provide the floating point registers via sync regs;
   - separated instruction vs.  data accesses
   - dirty log improvements for huge guests
   - bugfixes and documentation improvements.

  x86:
   - Hyper-V VMBus hypercall userspace exit
   - alternative implementation of lowest-priority interrupts using
     vector hashing (for better VT-d posted interrupt support)
   - fixed guest debugging with nested virtualizations
   - improved interrupt tracking in the in-kernel IOAPIC
   - generic infrastructure for tracking writes to guest
     memory - currently its only use is to speedup the legacy shadow
     paging (pre-EPT) case, but in the future it will be used for
     virtual GPUs as well
   - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
  KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
  KVM: x86: disable MPX if host did not enable MPX XSAVE features
  arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
  arm64: KVM: vgic-v3: Reset LRs at boot time
  arm64: KVM: vgic-v3: Do not save an LR known to be empty
  arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
  arm64: KVM: vgic-v3: Avoid accessing ICH registers
  KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
  KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
  KVM: arm/arm64: vgic-v2: Reset LRs at boot time
  KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
  KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
  KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
  KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
  KVM: s390: allocate only one DMA page per VM
  KVM: s390: enable STFLE interpretation only if enabled for the guest
  KVM: s390: wake up when the VCPU cpu timer expires
  KVM: s390: step the VCPU timer while in enabled wait
  KVM: s390: protect VCPU cpu timer with a seqcount
  KVM: s390: step VCPU cpu timer during kvm_run ioctl
  ...

Pull EDAC updates from Borislav Petkov:

 - Altera: L2 cache and On-Chip RAM support (Thor Thayer).

 - EDAC: Workqueue handling cleanups (Borislav Petkov).

 - Xgene: Register bus error handling (Loc Ho).

 - Misc small fixes.

* tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  ARM: socfpga: Enable OCRAM ECC on startup
  ARM: socfpga: Enable L2 cache ECC on startup
  ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries
  EDAC, altera: Add Altera L2 cache and OCRAM support
  EDAC: Use edac_debugfs_remove_recursive() in edac_debugfs_exit()
  EDAC, mpc85xx: Silence unused variable warning
  EDAC: Cleanup/sync workqueue functions
  EDAC: Kill workqueue setup/teardown functions
  EDAC: Balance workqueue setup and teardown
  arm64: Update the APM X-Gene EDAC node with the RB register resource
  EDAC, xgene: Add missing SoC register bus error handling
  Documentation, EDAC: Update xgene binding for missing register bus
  EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()

Pull LED updates from Jacek Anaszewski:
 "LED core improvements:
   - Fix misleading comment after workqueue removal from drivers
   - Avoid error message when a USB LED device is unplugged
   - Add helpers for calling brightness_set(_blocking)

  LED triggers:
   - Simplify led_trigger_store by using sysfs_streq()

  LED class drivers improvements:
   - Improve wording and formatting in a comment: lp3944
   - Fix return value check in create_gpio_led(): leds-gpio
   - Use GPIOF_OUT_INIT_LOW instead of hardcoded zero: leds-gpio
   - Use devm_led_classdev_register(): leds-lm3533, leds-lm3533,
     leds-lp8788, leds-wm831x-status, leds-s3c24xx, leds-s3c24xx,
     leds-max8997.

  New LED class driver:
   - Add driver for the ISSI IS31FL32xx family of LED controllers.

  Device Tree documentation:
   - of: Add vendor prefixes for Integrated Silicon Solutions Inc.
     (issi) and Si-En Technology (si-en).
   - DT: Add common bindings for Si-En Technology SN3216/18 and
     IS31FL32xx family of LED controllers, since they seem to be the
     same hardware, just rebranded"

* tag 'leds_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: triggers: simplify led_trigger_store
  leds: max8997: Use devm_led_classdev_register
  leds: da903x: Use devm_led_classdev_register
  leds: s3c24xx: Use devm_led_classdev_register
  leds: wm831x-status: Use devm_led_classdev_register
  leds: lp8788: Use devm_led_classdev_register
  leds: 88pm860x: Use devm_led_classdev_register
  leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
  of: Add vendor prefix for Si-En Technology
  leds: Add driver for the ISSI IS31FL32xx family of LED controllers
  DT: leds: Add binding for the ISSI IS31FL32xx family of LED controllers
  DT: Add vendor prefix for Integrated Silicon Solutions Inc.
  leds: lm3533: Use devm_led_classdev_register
  leds: gpio: Use GPIOF_OUT_INIT_LOW instead of hardcoded zero
  leds: core: add helpers for calling brightness_set(_blocking)
  leds: leds-gpio: Fix return value check in create_gpio_led()
  leds: lp3944: improve wording and formatting in a comment
  leds: core: avoid error message when a USB LED device is unplugged
  leds: core: fix misleading comment after workqueue removal from drivers

Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...

Merge tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - New drivers for NSA320 and LTC2990
 - Added support for ADM1278 to adm1275 driver
 - Added support for ncpXXxh103 to ntc_thermistor driver
 - Renamed vexpress hwmon implementation
 - Minor cleanups and improvements

* tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: Create an NSA320 hardware monitoring driver
  hwmon: Define binding for the nsa320-hwmon driver
  hwmon: (adm1275) Add support for ADM1278
  hwmon: (ntc_thermistor) Add support for ncpXXxh103
  Doc: hwmon: Fix typo "montoring" in hwmon
  ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  ARM: dts: Change iio_hwmon nodes to use hypen in node names
  hwmon: (iio_hwmon) Allow the driver to accept hypen in device tree node names
  hwmon: Add LTC2990 sensor driver
  hwmon: (vexpress) rename vexpress hwmon implementation

Pull regulator updates from Mark Brown:
 "This has been an extremely quiet release for the regulator API, aside
  from bugfixes and small enhancements the only thing that really stands
  out are the new drivers for Action Semiconductors ACT8945A, HiSilicon
  HI665x, and the Maxim MAX20024 and MAX77620"

* tag 'regulator-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
  regulator: pwm: Add support to have multiple instance of pwm regulator
  regulator: pwm: Fix calculation of voltage-to-duty cycle
  regulator: of: Use of_property_read_u32() for reading min/max
  regulator: pv88060: fix incorrect clear of event register
  regulator: pv88090: fix incorrect clear of event register
  regulator: max77620: Add support to configure active-discharge
  regulator: core: Add support for active-discharge configuration
  regulator: helper: Add helper to configure active-discharge using regmap
  regulator: core: Add support for active-discharge configuration
  regulator: DT: Add DT property for active-discharge configuration
  regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9
  regulator: act8865: Rename platform_data field to init_data
  regulator: act8865: Remove "static" from local variable
  ASoC: cs4271: add regulator consumer support
  regulator: max77620: Remove duplicate module alias
  regulator: max77620: Eliminate duplicate code
  regulator: max77620: Remove unused fields
  regulator: core: fix crash in error path of regulator_register
  regulator: core: Request GPIO before creating sysfs entries
  regulator: gpio: don't print error on EPROBE_DEFER
  ...

Pull regmap updates from Mark Brown:
 "This has been a very busy release for regmap, not just in cleaning up
  the mess we got ourselves into with the endianness handling but also
  in other areas too:

   - Fixes for the endianness handling so that we now explicitly default
     to little endian (the code used to do this by accident).  This
     fixes handling of explictly specified endianness on big endian
     systems.

   - Optimisation of the implementation of register striding.

   - A refectoring of the _update_bits() code to reduce duplication.

   - Fixes and enhancements for the interrupt implementation which make
     it easier to use in a wider range of systems"

* tag 'regmap-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (28 commits)
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  regmap: replace regmap_write_bits()
  regmap: irq: Enable irq retriggering for nested irqs
  regmap: add regmap_fields_force_xxx() macros
  regmap: add regmap_field_force_xxx() macros
  regmap: merge regmap_fields_update_bits() into macro
  regmap: merge regmap_fields_write() into macro
  regmap: add regmap_fields_update_bits_base()
  regmap: merge regmap_field_update_bits() into macro
  regmap: merge regmap_field_write() into macro
  regmap: add regmap_field_update_bits_base()
  regmap: merge regmap_update_bits_check_async() into macro
  regmap: merge regmap_update_bits_check() into macro
  regmap: merge regmap_update_bits_async() into macro
  regmap: merge regmap_update_bits() into macro
  regmap: add regmap_update_bits_base()
  regcache: flat: Introduce register strider order
  regcache: Introduce the index parsing API by stride order
  regmap: core: Introduce register stride order
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  ...

Pull spi updates from Mark Brown:
 "Not the biggest set of changes for SPI but a bit of a pickup in
  activity on the core:

   - Support for memory mapped read from flash devices via a SPI
     controller.

   - The beginnings of a message rewriting framework in the core which
     should in time allow us to support transforming messages to work
     around the limits of controllers or optimise the performance for
     controllers transparently to calling drivers.

   - Updates to the PXA2xx, the main functional change being to improve
     the ACPI support.

   - A new driver for the Analog Devices AXI SPI engine"

* tag 'spi-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: Add gfp parameter to kernel-doc to fix build warning
  spi: Fix htmldocs build error due struct spi_replaced_transfers
  spi: rockchip: covert rsd_nsecs to u32 type
  spi: rockchip: header file cleanup
  spi: xilinx: Add devicetree binding for spi-xilinx
  spi: respect the maximum segment size of DMA device
  spi: rockchip: check requesting dma channel with EPROBE_DEFER
  spi: rockchip: migrate to dmaengine_terminate_async
  spi: rockchip: check return value of dmaengine_prep_slave_sg
  spi: core: Fix deadlock when sending messages
  spi/rockchip: fix endian mode for 16-bit transfers
  spi/rockchip: Make sure spi clk is on in rockchip_spi_set_cs
  spi: pxa2xx: Use newer more explicit DMAengine terminate API
  spi: pxa2xx: Add support for Intel Broxton B-Step
  spi: lp-8841: return correct error code from probe
  spi: imx: drop bogus tests for rx/tx bufs in DMA transfer
  spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function
  spi: imx: make some register defines simpler
  spi: imx: remove unnecessary bit clearing in mx51_ecspi_config
  spi: imx: add support for all SPI word width for DMA
  ...

Pull pin control updates from Linus Walleij:
 "An almost purely driver related set of changes with no major changes
  to the framework, only one patch adding an unlocked version of the
  pinctrl_find_gpio_range_from_pin() library call.

  New drivers:
   - ST Microelectronics STM32 MCU support: this is a non-MMU low-end
     platform for IoT things (etc).
   - Microchip PIC32 MCU support: same story as for STM32.

  New subdrivers:
   - Allwinner SunXi H3 R_PIO controller support.
   - Qualcomm IPQ4019 support.
   - MediaTek MT2701 and MT7623.
   - Allwinner A64

  Non-critical fixes:
   - gpio_disable_free() for the Vybrid.
   - pinctrl single: use a separate lockdep class.

  Misc:
   - Substantial cleanups and rewrites for the Super-H PFC driver and
     subdrivers.
   - Various fixes and cleanups, especially Paul Gortmakers work to make
     nonmodular drivers nonmodular"

* tag 'pinctrl-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: single: Use a separate lockdep class
  drivers: pinctrl: add driver for Allwinner A64 SoC
  pinctrl: Broadcom Northstar2 pinctrl device tree bindings
  pinctrl: amlogic: Make driver independent from two-domain configuration
  pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b
  pinctrl: at91: use __maybe_unused to hide pm functions
  pinctrl: sh-pfc: core: don't open code of_device_get_match_data()
  pinctrl: uniphier: rename CONFIG options and file names
  pinctrl: sunxi: make A80 explicitly non-modular
  pinctrl: stm32: make explicitly non-modular
  pinctrl: sh-pfc: make explicitly non-modular
  pinctrl: meson: make explicitly non-modular
  pinctrl: pinctrl-mt6397 driver explicitly non-modular
  pinctrl: sunxi: does not need module.h
  pinctrl: pxa2xx: export symbols
  pinctrl: sunxi: Change mux setting on PI irq pins
  pinctrl: sunxi: Remove non existing irq's
  pinctrl: imx: attach iomuxc device to gpr syscon
  pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
  pinctrl: lpc1850-scu: document nxp,gpio-pin-interrupt
  ...

Pull cpu hotplug updates from Thomas Gleixner:
 "This is the first part of the ongoing cpu hotplug rework:

   - Initial implementation of the state machine

   - Runs all online and prepare down callbacks on the plugged cpu and
     not on some random processor

   - Replaces busy loop waiting with completions

   - Adds tracepoints so the states can be followed"

More detailed commentary on this work from an earlier email:
 "What's wrong with the current cpu hotplug infrastructure?

   - Asymmetry

     The hotplug notifier mechanism is asymmetric versus the bringup and
     teardown.  This is mostly caused by the notifier mechanism.

   - Largely undocumented dependencies

     While some notifiers use explicitely defined notifier priorities,
     we have quite some notifiers which use numerical priorities to
     express dependencies without any documentation why.

   - Control processor driven

     Most of the bringup/teardown of a cpu is driven by a control
     processor.  While it is understandable, that preperatory steps,
     like idle thread creation, memory allocation for and initialization
     of essential facilities needs to be done before a cpu can boot,
     there is no reason why everything else must run on a control
     processor.  Before this patch series, bringup looks like this:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

       bring the rest up

   - All or nothing approach

     There is no way to do partial bringups.  That's something which is
     really desired because we waste e.g.  at boot substantial amount of
     time just busy waiting that the cpu comes to life.  That's stupid
     as we could very well do preparatory steps and the initial IPI for
     other cpus and then go back and do the necessary low level
     synchronization with the freshly booted cpu.

   - Minimal debuggability

     Due to the notifier based design, it's impossible to switch between
     two stages of the bringup/teardown back and forth in order to test
     the correctness.  So in many hotplug notifiers the cancel
     mechanisms are either not existant or completely untested.

   - Notifier [un]registering is tedious

     To [un]register notifiers we need to protect against hotplug at
     every callsite.  There is no mechanism that bringup/teardown
     callbacks are issued on the online cpus, so every caller needs to
     do it itself.  That also includes error rollback.

  What's the new design?

     The base of the new design is a symmetric state machine, where both
     the control processor and the booting/dying cpu execute a well
     defined set of states.  Each state is symmetric in the end, except
     for some well defined exceptions, and the bringup/teardown can be
     stopped and reversed at almost all states.

     So the bringup of a cpu will look like this in the future:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

                                       bring itself up

     The synchronization step does not require the control cpu to wait.
     That mechanism can be done asynchronously via a worker or some
     other mechanism.

     The teardown can be made very similar, so that the dying cpu cleans
     up and brings itself down.  Cleanups which need to be done after
     the cpu is gone, can be scheduled asynchronously as well.

  There is a long way to this, as we need to refactor the notion when a
  cpu is available.  Today we set the cpu online right after it comes
  out of the low level bringup, which is not really correct.

  The proper mechanism is to set it to available, i.e. cpu local
  threads, like softirqd, hotplug thread etc. can be scheduled on that
  cpu, and once it finished all booting steps, it's set to online, so
  general workloads can be scheduled on it.  The reverse happens on
  teardown.  First thing to do is to forbid scheduling of general
  workloads, then teardown all the per cpu resources and finally shut it
  off completely.

  This patch series implements the basic infrastructure for this at the
  core level.  This includes the following:

   - Basic state machine implementation with well defined states, so
     ordering and prioritization can be expressed.

   - Interfaces to [un]register state callbacks

     This invokes the bringup/teardown callback on all online cpus with
     the proper protection in place and [un]installs the callbacks in
     the state machine array.

     For callbacks which have no particular ordering requirement we have
     a dynamic state space, so that drivers don't have to register an
     explicit hotplug state.

     If a callback fails, the code automatically does a rollback to the
     previous state.

   - Sysfs interface to drive the state machine to a particular step.

     This is only partially functional today.  Full functionality and
     therefor testability will be achieved once we converted all
     existing hotplug notifiers over to the new scheme.

   - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying
     processor:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu
       wait for boot
                                       bring itself up

                                       Signal completion to control cpu

     In a previous step of this work we've done a full tree mechanical
     conversion of all hotplug notifiers to the new scheme.  The balance
     is a net removal of about 4000 lines of code.

     This is not included in this series, as we decided to take a
     different approach.  Instead of mechanically converting everything
     over, we will do a proper overhaul of the usage sites one by one so
     they nicely fit into the symmetric callback scheme.

     I decided to do that after I looked at the ugliness of some of the
     converted sites and figured out that their hotplug mechanism is
     completely buggered anyway.  So there is no point to do a
     mechanical conversion first as we need to go through the usage
     sites one by one again in order to achieve a full symmetric and
     testable behaviour"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  cpu/hotplug: Document states better
  cpu/hotplug: Fix smpboot thread ordering
  cpu/hotplug: Remove redundant state check
  cpu/hotplug: Plug death reporting race
  rcu: Make CPU_DYING_IDLE an explicit call
  cpu/hotplug: Make wait for dead cpu completion based
  cpu/hotplug: Let upcoming cpu bring itself fully up
  arch/hotplug: Call into idle with a proper state
  cpu/hotplug: Move online calls to hotplugged cpu
  cpu/hotplug: Create hotplug threads
  cpu/hotplug: Split out the state walk into functions
  cpu/hotplug: Unpark smpboot threads from the state machine
  cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
  cpu/hotplug: Implement setup/removal interface
  cpu/hotplug: Make target state writeable
  cpu/hotplug: Add sysfs state interface
  cpu/hotplug: Hand in target state to _cpu_up/down
  cpu/hotplug: Convert the hotplugged cpu work to a state machine
  cpu/hotplug: Convert to a state machine for the control processor
  cpu/hotplug: Add tracepoints
  ...

Pull irq updates from Thomas Gleixner:
 "The 4.6 pile of irq updates contains:

   - Support for IPI irqdomains to support proper integration of IPIs to
     and from coprocessors.  The first user of this new facility is
     MIPS.  The relevant MIPS patches come with the core to avoid merge
     ordering issues and have been acked by Ralf.

   - A new command line option to set the default interrupt affinity
     mask at boot time.

   - Support for some more new ARM and MIPS interrupt controllers:
     tango, alpine-msix and bcm6345-l1

   - Two small cleanups for x86/apic which we merged into irq/core to
     avoid yet another branch in x86 with two tiny commits.

   - The usual set of updates, cleanups in drivers/irqchip.  Mostly in
     the area of ARM-GIC, arada-37-xp and atmel chips.  Nothing
     outstanding here"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  irqchip/irq-alpine-msi: Release the correct domain on error
  irqchip/mxs: Fix error check of of_io_request_and_map()
  irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
  genirq: Export IRQ functions for module use
  irqchip/gic/realview: Support more RealView DCC variants
  Documentation/bindings: Document the Alpine MSIX driver
  irqchip: Add the Alpine MSIX interrupt controller
  irqchip/gic-v3: Always return IRQ_SET_MASK_OK_DONE in gic_set_affinity
  irqchip/gic-v3-its: Mark its_init() and its children as __init
  irqchip/gic-v3: Remove gic_root_node variable from the ITS code
  irqchip/gic-v3: ACPI: Add redistributor support via GICC structures
  irqchip/gic-v3: Add ACPI support for GICv3/4 initialization
  irqchip/gic-v3: Refactor gic_of_init() for GICv3 driver
  x86/apic: Deinline _flat_send_IPI_mask, save ~150 bytes
  x86/apic: Deinline __default_send_IPI_*, save ~200 bytes
  dt-bindings: interrupt-controller: Add SoC-specific compatible string to Marvell ODMI
  irqchip/mips-gic: Add new DT property to reserve IPIs
  MIPS: Delete smp-gic.c
  MIPS: Make smp CMP, CPS and MT use the new generic IPI functions
  MIPS: Add generic SMP IPI support
  ...

Pull timer updates from Thomas Gleixner:
 "The timer department delivers this time:

   - Support for cross clock domain timestamps in the core code plus a
     first user.  That allows more precise timestamping for PTP and
     later for audio and other peripherals.

     The ptp/e1000e patches have been acked by the relevant maintainers
     and are carried in the timer tree to avoid merge ordering issues.

   - Support for unregistering the current clocksource watchdog.  That
     lifts a limitation for switching clocksources which has been there
     from day 1

   - The usual pile of fixes and updates to the core and the drivers.
     Nothing outstanding and exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  time/timekeeping: Work around false positive GCC warning
  e1000e: Adds hardware supported cross timestamp on e1000e nic
  ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping
  x86/tsc: Always Running Timer (ART) correlated clocksource
  hrtimer: Revert CLOCK_MONOTONIC_RAW support
  time: Add history to cross timestamp interface supporting slower devices
  time: Add driver cross timestamp interface for higher precision time synchronization
  time: Remove duplicated code in ktime_get_raw_and_real()
  time: Add timekeeping snapshot code capturing system time and counter
  time: Add cycles to nanoseconds translation
  jiffies: Use CLOCKSOURCE_MASK instead of constant
  clocksource: Introduce clocksource_freq2mult()
  clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()
  clocksource/drivers/arm_global_timer: Register delay timer
  clocksource/drivers/lpc32xx: Support timer-based ARM delay
  clocksource/drivers/lpc32xx: Support periodic mode
  clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents
  clocksource/drivers/rockchip: Add err handle for rk_timer_init
  ...

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Miscellaneous fixes, cleanups, restructuring.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Export rcu_gp_is_normal()
  rcu: Remove rcu_user_hooks_switch
  rcu: Catch up rcu_report_qs_rdp() comment with reality
  rcu: Document unique-name limitation for DEFINE_STATIC_SRCU()
  rcu: Make rcu/tiny_plugin.h explicitly non-modular
  irq: Privatize irq_common_data::state_use_accessors
  RCU: Privatize rcu_node::lock
  sparse: Add __private to privatize members of structs
  rcu: Remove useless rcu_data_p when !PREEMPT_RCU
  rcutorture: Correct no-expedite console messages
  rcu: Set rdp->gpwrap when CPU is idle
  rcu: Stop treating in-kernel CPU-bound workloads as errors
  rcu: Update rcu_report_qs_rsp() comment
  rcu: Assign false instead of 0 for ->core_needs_qs
  rcutorture: Check for self-detected stalls
  rcutorture: Don't keep empty console.log.diags files
  rcutorture: Add checks for rcutorture writer starvation

Pull x86 timer update from Ingo Molnar:
 "A single simplification of the x86 TSC code"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Use topology functions

Pull x86 core platform updates from Ingo Molnar:
 "Intel Quark and Geode SoC platform updates"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel/quark: Drop IMR lock bit support
  x86/platform/intel/mid: Remove dead code
  x86/platform: Make platform/geode/net5501.c explicitly non-modular
  x86/platform: Make platform/geode/alix.c explicitly non-modular
  x86/platform: Make platform/geode/geos.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr_selftest.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr.c explicitly non-modular

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Enable full ASLR randomization for 32-bit programs (Hector
     Marco-Gisbert)

   - Add initial minimal INVPCI support, to flush global mappings (Andy
     Lutomirski)

   - Add KASAN enhancements (Andrey Ryabinin)

   - Fix mmiotrace for huge pages (Karol Herbst)

   - ... misc cleanups and small enhancements"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/32: Enable full randomization on i386 and X86_32
  x86/mm/kmmio: Fix mmiotrace for hugepages
  x86/mm: Avoid premature success when changing page attributes
  x86/mm/ptdump: Remove paravirt_enabled()
  x86/mm: Fix INVPCID asm constraint
  x86/dmi: Switch dmi_remap() from ioremap() [uncached] to ioremap_cache()
  x86/mm: If INVPCID is available, use it to flush global mappings
  x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
  x86/mm: Add INVPCID helpers
  x86/kasan: Write protect kasan zero shadow
  x86/kasan: Clear kasan_zero_page after TLB flush
  x86/mm/numa: Check for failures in numa_clear_kernel_node_hotplug()
  x86/mm/numa: Clean up numa_clear_kernel_node_hotplug()
  x86/mm: Make kmap_prot into a #define
  x86/mm/32: Set NX in __supported_pte_mask before enabling paging
  x86/mm: Streamline and restore probe_memory_block_size()

Pull x86 microcode updates from Ingo Molnar:
 "The biggest change in this cycle was the separation of the microcode
  loading mechanism from the initrd code plus the support of built-in
  microcode images.

  There were also lots cleanups and general restructuring (by Borislav
  Petkov)"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/microcode/intel: Drop orig_sum from ext signature checksum
  x86/microcode/intel: Improve microcode sanity-checking error messages
  x86/microcode/intel: Merge two consecutive if-statements
  x86/microcode/intel: Get rid of DWSIZE
  x86/microcode/intel: Change checksum variables to u32
  x86/microcode: Use kmemdup() rather than duplicating its implementation
  x86/microcode: Remove unnecessary paravirt_enabled check
  x86/microcode: Document builtin microcode loading method
  x86/microcode/AMD: Issue microcode updated message later
  x86/microcode/intel: Cleanup get_matching_model_microcode()
  x86/microcode/intel: Remove unused arg of get_matching_model_microcode()
  x86/microcode/intel: Rename mc_saved_in_initrd
  x86/microcode/intel: Use *wrmsrl variants
  x86/microcode/intel: Cleanup apply_microcode_intel()
  x86/microcode/intel: Move the BUG_ON up and turn it into WARN_ON
  x86/microcode/intel: Rename mc_intel variable to mc
  x86/microcode/intel: Rename mc_saved_count to num_saved
  x86/microcode/intel: Rename local variables of type struct mc_saved_data
  x86/microcode/AMD: Drop redundant printk prefix
  x86/microcode: Issue update message only once
  ...

Pull x86 fpu updates from Ingo Molnar:
 "The biggest change in terms of impact is the changing of the FPU
  context switch model to 'eagerfpu' for all CPU types, via: commit
  58122bf1: "x86/fpu: Default eagerfpu=on on all CPUs"

  This makes all FPU saves and restores synchronous and makes the FPU
  code a lot more obvious to read.  In the next cycle, if this change is
  problem free, we'll remove the old lazy FPU restore code altogether.

  This change flushed out some old bugs, which should all be fixed by
  now, BYMMV"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Default eagerfpu=on on all CPUs
  x86/fpu: Speed up lazy FPU restores slightly
  x86/fpu: Fold fpu_copy() into fpu__copy()
  x86/fpu: Fix FNSAVE usage in eagerfpu mode
  x86/fpu: Fix math emulation in eager fpu mode

Pull x86 build update from Ingo Molnar:
 "A single adjustment of a defconfig value"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/defconfigs/32: Set CONFIG_FRAME_WARN to the Kconfig default

Pull x86 boot updates from Ingo Molnar:
 "Early command line options parsing enhancements from Dave Hansen, plus
  minor cleanups and enhancements"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Remove unused 'is_big_kernel' variable
  x86/boot: Use proper array element type in memset() size calculation
  x86/boot: Pass in size to early cmdline parsing
  x86/boot: Simplify early command line parsing
  x86/boot: Fix early command-line parsing when partial word matches
  x86/boot: Fix early command-line parsing when matching at end
  x86/boot: Simplify kernel load address alignment check
  x86/boot: Micro-optimize reset_early_page_tables()

Pull x86 asm updates from Ingo Molnar:
 "This is another big update. Main changes are:

   - lots of x86 system call (and other traps/exceptions) entry code
     enhancements.  In particular the complex parts of the 64-bit entry
     code have been migrated to C code as well, and a number of dusty
     corners have been refreshed.  (Andy Lutomirski)

   - vDSO special mapping robustification and general cleanups (Andy
     Lutomirski)

   - cpufeature refactoring, cleanups and speedups (Borislav Petkov)

   - lots of other changes ..."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  x86/cpufeature: Enable new AVX-512 features
  x86/entry/traps: Show unhandled signal for i386 in do_trap()
  x86/entry: Call enter_from_user_mode() with IRQs off
  x86/entry/32: Change INT80 to be an interrupt gate
  x86/entry: Improve system call entry comments
  x86/entry: Remove TIF_SINGLESTEP entry work
  x86/entry/32: Add and check a stack canary for the SYSENTER stack
  x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
  x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
  x86/entry: Vastly simplify SYSENTER TF (single-step) handling
  x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
  x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
  x86/entry/32: Restore FLAGS on SYSEXIT
  x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
  x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
  selftests/x86: In syscall_nt, test NT|TF as well
  x86/asm-offsets: Remove PARAVIRT_enabled
  x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
  uprobes: __create_xol_area() must nullify xol_mapping.fault
  x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
  ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

 Conflicts:
	kernel/rcu/tree.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull NOHZ updates from Ingo Molnar:
 "NOHZ enhancements, by Frederic Weisbecker, which reorganizes/refactors
  the NOHZ 'can the tick be stopped?' infrastructure and related code to
  be data driven, and harmonizes the naming and handling of all the
  various properties"

[ This makes the ugly "fetch_or()" macro that the scheduler used
  internally a new generic helper, and does a bad job at it.

  I'm pulling it, but I've asked Ingo and Frederic to get this
  fixed up ]

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched-clock: Migrate to use new tick dependency mask model
  posix-cpu-timers: Migrate to use new tick dependency mask model
  sched: Migrate sched to use new tick dependency mask model
  sched: Account rr tasks
  perf: Migrate perf to use new tick dependency mask model
  nohz: Use enum code for tick stop failure tracing message
  nohz: New tick dependency mask
  nohz: Implement wide kick on top of irq work
  atomic: Export fetch_or()

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Make schedstats a runtime tunable (disabled by default) and
     optimize it via static keys.

     As most distributions enable CONFIG_SCHEDSTATS=y due to its
     instrumentation value, this is a nice performance enhancement.
     (Mel Gorman)

   - Implement 'simple waitqueues' (swait): these are just pure
     waitqueues without any of the more complex features of full-blown
     waitqueues (callbacks, wake flags, wake keys, etc.).  Simple
     waitqueues have less memory overhead and are faster.

     Use simple waitqueues in the RCU code (in 4 different places) and
     for handling KVM vCPU wakeups.

     (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker,
     Marcelo Tosatti)

   - sched/numa enhancements (Rik van Riel)

   - NOHZ performance enhancements (Rik van Riel)

   - Various sched/deadline enhancements (Steven Rostedt)

   - Various fixes (Peter Zijlstra)

   - ... and a number of other fixes, cleanups and smaller enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  sched/cputime: Fix steal_account_process_tick() to always return jiffies
  sched/deadline: Remove dl_new from struct sched_dl_entity
  Revert "kbuild: Add option to turn incompatible pointer check into error"
  sched/deadline: Remove superfluous call to switched_to_dl()
  sched/debug: Fix preempt_disable_ip recording for preempt_disable()
  sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity
  time, acct: Drop irq save & restore from __acct_update_integrals()
  acct, time: Change indentation in __acct_update_integrals()
  sched, time: Remove non-power-of-two divides from __acct_update_integrals()
  sched/rt: Kick RT bandwidth timer immediately on start up
  sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug
  sched/debug: Move sched_domain_sysctl to debug.c
  sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c
  sched/rt: Fix PI handling vs. sched_setscheduler()
  sched/core: Remove duplicated sched_group_set_shares() prototype
  sched/fair: Consolidate nohz CPU load update code
  sched/fair: Avoid using decay_load_missed() with a negative value
  sched/deadline: Always calculate end of period on sched_yield()
  sched/cgroup: Fix cgroup entity load tracking tear-down
  rcu: Use simple wait queues where possible in rcutree
  ...

Pull RAS updates from Ingo Molnar:
 "Various RAS updates:

   - AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
     MCA) error decoding support (Aravind Gopalakrishnan)

   - x86 memcpy_mcsafe() support, to enable smart(er) hardware error
     recovery in NVDIMM drivers, based on an extension of the x86
     exception handling code.  (Tony Luck)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/sb_edac: Fix computation of channel address
  x86/mm, x86/mce: Add memcpy_mcsafe()
  x86/mce/AMD: Document some functionality
  x86/mce: Clarify comments regarding deferred error
  x86/mce/AMD: Fix logic to obtain block address
  x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
  x86/mce: Move MCx_CONFIG MSR definitions
  x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
  x86/mm: Expand the exception table logic to allow new handling options
  x86/mce/AMD: Set MCAX Enable bit
  x86/mce/AMD: Carve out threshold block preparation
  x86/mce/AMD: Fix LVT offset configuration for thresholding
  x86/mce/AMD: Reduce number of blocks scanned per bank
  x86/mce/AMD: Do not perform shared bank check for future processors
  x86/mce: Fix order of AMD MCE init function call

Pull perf updates from Ingo Molnar:
 "Main kernel side changes:

   - Big reorganization of the x86 perf support code.  The old code grew
     organically deep inside arch/x86/kernel/cpu/perf* and its naming
     became somewhat messy.

     The new location is under arch/x86/events/, using the following
     cleaner hierarchy of source code files:

       perf/x86: Move perf_event.c .................. => x86/events/core.c
       perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
       perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
       perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
       perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
       perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
       perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
       perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
       perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
       perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
       perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
       perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
       perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
       perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
       perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
       perf/x86: Move perf_event_intel_uncore_snb.c   => x86/events/intel/uncore_snb.c
       perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
       perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
       perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
       perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
       perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c

     (Borislav Petkov)

   - Update various x86 PMU constraint and hw support details (Stephane
     Eranian)

   - Optimize kprobes for BPF execution (Martin KaFai Lau)

   - Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
     Gleixner)

   - Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)

   - Various fixes and smaller cleanups.

  There are lots of perf tooling updates as well.  A few highlights:

  perf report/top:

     - Hierarchy histogram mode for 'perf top' and 'perf report',
       showing multiple levels, one per --sort entry: (Namhyung Kim)

       On a mostly idle system:

         # perf top --hierarchy -s comm,dso

       Then expand some levels and use 'P' to take a snapshot:

         # cat perf.hist.0
         -  92.32%         perf
               58.20%         perf
               22.29%         libc-2.22.so
                5.97%         [kernel]
                4.18%         libelf-0.165.so
                1.69%         [unknown]
         -   4.71%         qemu-system-x86
                3.10%         [kernel]
                1.60%         qemu-system-x86_64 (deleted)
         +   2.97%         swapper
         #

     - Add 'L' hotkey to dynamicly set the percent threshold for
       histogram entries and callchains, i.e.  dynamicly do what the
       --percent-limit command line option to 'top' and 'report' does.
       (Namhyung Kim)

  perf mem:

     - Allow specifying events via -e in 'perf mem record', also listing
       what events can be specified via 'perf mem record -e list' (Jiri
       Olsa)

  perf record:

     - Add 'perf record' --all-user/--all-kernel options, so that one
       can tell that all the events in the command line should be
       restricted to the user or kernel levels (Jiri Olsa), i.e.:

         perf record -e cycles:u,instructions:u

       is equivalent to:

         perf record --all-user -e cycles,instructions

     - Make 'perf record' collect CPU cache info in the perf.data file header:

         $ perf record usleep 1
         [ perf record: Woken up 1 times to write data ]
         [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
         $ perf report --header-only -I | tail -10 | head -8
         # CPU cache info:
         #  L1 Data                 32K [0-1]
         #  L1 Instruction          32K [0-1]
         #  L1 Data                 32K [2-3]
         #  L1 Instruction          32K [2-3]
         #  L2 Unified             256K [0-1]
         #  L2 Unified             256K [2-3]
         #  L3 Unified            4096K [0-3]

       Will be used in 'perf c2c' and eventually in 'perf diff' to
       allow, for instance running the same workload in multiple
       machines and then when using 'diff' show the hardware difference.
       (Jiri Olsa)

     - Improved support for Java, using the JVMTI agent library to do
       jitdumps that then will be inserted in synthesized
       PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
       ELF files stored in ~/.debug and keyed with build-ids, to allow
       symbol resolution and even annotation with source line info, see
       the changeset comments to see how to use it (Stephane Eranian)

  perf script/trace:

     - Decode data_src values (e.g.  perf.data files generated by 'perf
       mem record') in 'perf script': (Jiri Olsa)

         # perf script
           perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
                                                                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     - Improve support to 'data_src', 'weight' and 'addr' fields in
       'perf script' (Jiri Olsa)

     - Handle empty print fmts in 'perf script -s' i.e. when running
       python or perl scripts (Taeung Song)

  perf stat:

     - 'perf stat' now shows shadow metrics (insn per cycle, etc) in
       interval mode too.  E.g:

         # perf stat -I 1000 -e instructions,cycles sleep 1
         #         time   counts unit events
            1.000215928  519,620      instructions     #  0.69 insn per cycle
            1.000215928  752,003      cycles
         <SNIP>

     - Port 'perf kvm stat' to PowerPC (Hemant Kumar)

     - Implement CSV metrics output in 'perf stat' (Andi Kleen)

  perf BPF support:

     - Support converting data from bpf events in 'perf data' (Wang Nan)

     - Print bpf-output events in 'perf script': (Wang Nan).

         # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
         # perf script
            usleep  4882 21384.532523:   evt:  ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
             BPF output: 0000: 52 61 69 73 65 20 61 20  Raise a
                         0008: 42 50 46 20 65 76 65 6e  BPF even
                         0010: 74 21 00 00              t!..
             BPF string: "Raise a BPF event!"
         #

     - Add API to set values of map entries in a BPF object, be it
       individual map slots or ranges (Wang Nan)

     - Introduce support for the 'bpf-output' event (Wang Nan)

     - Add glue to read perf events in a BPF program (Wang Nan)

     - Improve support for bpf-output events in 'perf trace' (Wang Nan)

  ... and tons of other changes as well - see the shortlog and git log
  for details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
  perf stat: Add --metric-only support for -A
  perf stat: Implement --metric-only mode
  perf stat: Document CSV format in manpage
  perf hists browser: Check sort keys before hot key actions
  perf hists browser: Allow thread filtering for comm sort key
  perf tools: Add sort__has_comm variable
  perf tools: Recalc total periods using top-level entries in hierarchy
  perf tools: Remove nr_sort_keys field
  perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
  perf tools: Remove hist_entry->fmt field
  perf tools: Fix command line filters in hierarchy mode
  perf tools: Add more sort entry check functions
  perf tools: Fix hist_entry__filter() for hierarchy
  perf jitdump: Build only on supported archs
  tools lib traceevent: Add '~' operation within arg_num_eval()
  perf tools: Omit unnecessary cast in perf_pmu__parse_scale
  perf tools: Pass perf_hpp_list all the way through setup_sort_list
  perf tools: Fix perf script python database export crash
  perf jitdump: DWARF is also needed
  perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
  ...

Pull read-only kernel memory updates from Ingo Molnar:
 "This tree adds two (security related) enhancements to the kernel's
  handling of read-only kernel memory:

   - extend read-only kernel memory to a new class of formerly writable
     kernel data: 'post-init read-only memory' via the __ro_after_init
     attribute, and mark the ARM and x86 vDSO as such read-only memory.

     This kind of attribute can be used for data that requires a once
     per bootup initialization sequence, but is otherwise never modified
     after that point.

     This feature was based on the work by PaX Team and Brad Spengler.

     (by Kees Cook, the ARM vDSO bits by David Brown.)

   - make CONFIG_DEBUG_RODATA always enabled on x86 and remove the
     Kconfig option.  This simplifies the kernel and also signals that
     read-only memory is the default model and a first-class citizen.
     (Kees Cook)"

* 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM/vdso: Mark the vDSO code read-only after init
  x86/vdso: Mark the vDSO code read-only after init
  lkdtm: Verify that '__ro_after_init' works correctly
  arch: Introduce post-init read-only memory
  x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
  mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
  asm-generic: Consolidate mark_rodata_ro()

Pull dma_*_writecombine rename from Ingo Molnar:
 "Rename dma_*_writecombine() to dma_*_wc()

  This is a tree-wide API rename, to move the dma_*() write-combining
  APIs closer in name to their usual API families.  (The old API names
  are kept as compatibility wrappers to not introduce extra breakage.)

  The patch was Coccinelle generated"

* 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()

Pull locking changes from Ingo Molnar:
 "Various updates:

   - Futex scalability improvements: remove page lock use for shared
     futex get_futex_key(), which speeds up 'perf bench futex hash'
     benchmarks by over 40% on a 60-core Westmere.  This makes anon-mem
     shared futexes perform close to private futexes.  (Mel Gorman)

   - lockdep hash collision detection and fix (Alfredo Alvarez
     Fernandez)

   - lockdep testing enhancements (Alfredo Alvarez Fernandez)

   - robustify lockdep init by using hlists (Andrew Morton, Andrey
     Ryabinin)

   - mutex and csd_lock micro-optimizations (Davidlohr Bueso)

   - small x86 barriers tweaks (Michael S Tsirkin)

   - qspinlock updates (Waiman Long)"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()
  locking/csd_lock: Explicitly inline csd_lock*() helpers
  futex: Replace barrier() in unqueue_me() with READ_ONCE()
  locking/lockdep: Detect chain_key collisions
  locking/lockdep: Prevent chain_key collisions
  tools/lib/lockdep: Fix link creation warning
  tools/lib/lockdep: Add tests for AA and ABBA locking
  tools/lib/lockdep: Add userspace version of READ_ONCE()
  tools/lib/lockdep: Fix the build on recent kernels
  locking/qspinlock: Move __ARCH_SPIN_LOCK_UNLOCKED to qspinlock_types.h
  locking/mutex: Allow next waiter lockless wakeup
  locking/pvqspinlock: Enable slowpath locking count tracking
  locking/qspinlock: Use smp_cond_acquire() in pending code
  locking/pvqspinlock: Move lock stealing count tracking code into pv_queued_spin_steal_lock()
  locking/mcs: Fix mcs_spin_lock() ordering
  futex: Remove requirement for lock_page() in get_futex_key()
  futex: Rename barrier references in ordering guarantees
  locking/atomics: Update comment about READ_ONCE() and structures
  locking/lockdep: Eliminate lockdep_init()
  locking/lockdep: Convert hash tables to hlists
  ...

Pull ram resource handling changes from Ingo Molnar:
 "Core kernel resource handling changes to support NVDIMM error
  injection.

  This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM,
  for System RAM while keeping the current IORESOURCE_MEM type bit set
  for all memory-mapped ranges (including System RAM) for backward
  compatibility.

  With this resource flag it no longer takes a strcmp() loop through the
  resource tree to find "System RAM" resources.

  The new resource type is then used to extend ACPI/APEI error injection
  facility to also support NVDIMM"

* 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI/EINJ: Allow memory error injection to NVDIMM
  resource: Kill walk_iomem_res()
  x86/kexec: Remove walk_iomem_res() call with GART type
  x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
  resource: Add walk_iomem_res_desc()
  memremap: Change region_intersects() to take @flags and @desc
  arm/samsung: Change s3c_pm_run_res() to use System RAM type
  resource: Change walk_system_ram() to use System RAM type
  drivers: Initialize resource entry to zero
  xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM
  kexec: Set IORESOURCE_SYSTEM_RAM for System RAM
  arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM
  ia64: Set System RAM type and descriptor
  x86/e820: Set System RAM type and descriptor
  resource: Add I/O resource descriptor
  resource: Handle resource flags properly
  resource: Add System RAM resource type

There are only a few differences between PCF2127 and PCF2129 (PCF2127
has 512 bytes of general purpose SRAM and count-down timer).

The rtc-pcf2127 driver currently doesn't use the PCF2127 specific
functionality and Kconfig help text already says this driver supports
PCF2127/29, so we can simply add pcf2129 to device id list.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

pcf2127 has selectable I2C-bus and SPI-bus interface support.

This adds support for SPI interface.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

pcf2127 has selectable I2C-bus and SPI-bus interface support.
Currently rtc-pcf2127 driver only supports I2C.

This is preparation for support for SPI interface.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This adds support to
- enable/disable the thermometer
- set the temperature scanning interval
- read the current temperature that is used for temp compensation.
via hwmon interface
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This simplifies the update of single bits in the eeprom.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

objtool reports the following warnings:

  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: duplicate frame pointer save
  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x3: duplicate frame pointer setup
  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: frame pointer state mismatch

The warning message needs to be improved, but what it really means in
this case is that ds1685_rtc_poweroff() has a possible code path where
it can actually fall through to the next function in the object code,
ds1685_rtc_work_queue().

The bug is caused by the use of the unreachable() macro in a place which
is actually reachable.  That causes gcc to assume that the printk()
immediately before the unreachable() macro never returns, when in fact
it does.  So gcc places the printk() at the very end of the function's
object code.  When the printk() returns, the next function starts
executing.

The surrounding comment and printk message state that the code should
spin forever, which explains the unreachable() statement.  However the
actual spin code is missing.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Year field must be in BCD format, according to
hym8563 datasheet.

Due to the bug year 2016 became 2010.

Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>