- 01 Oct, 2018 2 commits
-
-
Anirudh Venkataramanan authored
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_start_rx_rings ice_vsi_stop_rx_rings ice_vsi_stop_tx_rings ice_vsi_cfg_rxqs ice_vsi_cfg_txqs ice_vsi_cfg_msix Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
The functions that are used for PF VSI/netdev setup will also be used for SR-IOV support. To allow reuse of these functions, move these functions out of ice_main.c to ice_common.c/ice_lib.c This move is done across multiple patches. Each patch moves a few functions and may have minor adjustments. For example, a function that was previously static in ice_main.c will be made non-static temporarily in its new location to allow the driver to build cleanly. These adjustments will be removed in subsequent patches where more code is moved out of ice_main.c In this particular patch, the following functions were moved out of ice_main.c: int ice_add_mac_to_list ice_free_fltr_list ice_stat_update40 ice_stat_update32 ice_update_eth_stats ice_vsi_add_vlan ice_vsi_kill_vlan ice_vsi_manage_vlan_insertion ice_vsi_manage_vlan_stripping Signed-off-by:
-
- 28 Sep, 2018 38 commits
-
-
Bruce Allan authored
rx_mini_pending was set to an incorrect value. This was causing EINVAL to always be returned to 'ethtool -G'. The driver does not support mini or jumbo rings so the respective settings should be zero. Also, change the valid range of the number of descriptors in the rings to make the code simpler and easier for users to understand (this removes the valid settings of 8 and 16). Add a system log message indicating when the number is rounded-up from what the user specifies with the 'ethtool -G' command (i.e. when it is not a multiple of 32), and update the log message when a user-provided value is out of range to also indicate the stride. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
-
Anirudh Venkataramanan authored
This patch makes a couple of changes in the way the driver uses the "get capabilities" command. 1. Get device capabilities in addition to function capabilities 2. Align to latest spec by using cap_count to determine size of the buffer in case of length error. Signed-off-by:
-
Anirudh Venkataramanan authored
Query the Tx scheduler tree node information from FW before adding it to the driver's software database. This will keep the node information current in driver. Signed-off-by:
-
Brett Creeley authored
Previously the comment stated that VSI lists should be used when a second VSI becomes a subscriber to the "VLAN address". VSI lists are always used for VLAN membership, so replace "VLAN address" with "MAC address". Also note that VLAN(s) always use VSI list rules. Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
-
Jacob Keller authored
We have MAX_FW_API_VER_BRANCH, MAX_FW_API_VER_MAJOR, and MAX_FW_API_VER_MINOR that we use in ice_controlq.h to test when a firmware version is newer than expected. This is currently tested by comparing each field separately. Thus, we compare the branch field against the MAX_FW_API_VER_BRANCH, and so forth. This means that currently, if we suppose that the max firmware version is defined as 0.2.1, i.e. Then firmware 0.1.3 will fail to load. This is because the minor version 3 is greater than the max minor version 1. This is not intuitive, because of the notion that increasing the major firmware version to 2 should mean any firmware version with a major version is less than 2 should be considered older than 2... In order to allow both 0.2.1 and 0.1.3 to load, you would have to define the "max" firmware version as 0.2.3.. It is possible that such a firmware version doesn't even exist yet! Fix this by replacing the current logic with an updated check that behaves as follows: First, we check the major version. If it is greater than the expected version, then we prevent driver load. Additionally, a warning message is logged to indicate to the system administrator that they need to update their driver. This is now the only case where the driver will refuse to load. Second, if the major version is less than the expected version, we log an information message indicating the NVM should be updated. Third, if the major version is exact, we'll then check the minor version. If the minor version is more than two versions less than expected, we log an information message indicating the NVM should be updated. If it is more than two versions greater than the expected version, we log an information message that the driver should be updated. To support this, the ice_aq_ver_check function needs its signature updated to pass the HW structure. Since we now pass this structure, there is no need to pass the firmware API versions separately. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Bruce Allan authored
Update branding strings and remove device ids 0x1594 and 0x1595. Signed-off-by:
-
Bruce Allan authored
Direct assignment is preferred over a memcpy() Signed-off-by:
-
Jacob Keller authored
When shutting down the controlqs, we check if they are initialized before we shut them down and destroy the lock. This is important, as it prevents attempts to access the lock of an already shutdown queue. Unfortunately, we checked rq.head and sq.head as the value to determine if the queue was initialized. This doesn't work, because head is not reset when the queue is shutdown. In some flows, the adminq will have already been shut down prior to calling ice_shutdown_all_ctrlqs. This can result in a crash due to attempting to access the already destroyed mutex. Fix this by using rq.count and sq.count instead. Indeed, ice_shutdown_sq and ice_shutdown_rq already indicate that this is the value we should be using to determine of the queue was initialized. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/sched/sch_generic.c:944:6: warning: symbol 'qdisc_free_cb' was not declared. Should it be static? Fixes: 3a7d0d07 ("net: sched: extend Qdisc with rcu") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This test adds an fdb entry with the sticky flag and sends traffic from a different port with the same mac as a source address expecting the entry to not change ports if the flag is operating correctly. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We need to explicitly zero is_sticky when creating a new fdb, otherwise we might get a stale value for a new entry. Fixes: 435f2e7c ("net: bridge: add support for sticky fdb entries") Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Cleanups, minor additions & fixes for HNS3 driver This patch-set contains cleans-ups, minor changes and fixes to the HNS3 driver. ==================== Signed-off-by: -
Huazhong Tan authored
The user's coal configuration will be lost after reset, so the tx_coal and rx_coal fields are added to the struct hns_nic_priv to save the coal configuration and used to restore the user's configuration after the reset is complete. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Huazhong Tan authored
The current hns3_get_max_available_channels returns the total number of queues for the device, which makes ethtool -L set the number of queues per channel queues incorrectly, so hns3_get_max_available_channels should return the maximum available number of queues per channel, depending on the total number of queues allocated and the hardware configurations. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Huazhong Tan authored
hclge_tm_schd_info_update should return an error when num_tc is greater than alloc_tqps. This patch changes the return type of hnae3_register_ae_algo from void to int. Signed-off-by:
-
Yunsheng Lin authored
Currently hns3_nic_change_mtu will try to down the netdev before setting mtu, and it does not up the netdev when the setting fails, which causes netdev not up problem. This patch fixes it by not returning when the setting fails. Fixes: a8e8b7ff ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by:
-
Yunsheng Lin authored
The hardware expects a unit of 128 bytes when setting packet buffer. When calculating the packet buffer size, hclge_rx_buffer_calc does not round up the size as a unit of 128 byte, which may casue packet lost problem when stress testing. This patch fixes it by rounding up packet size when calculating. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Fuyun Liang authored
This patch adds serdes parallel inner loopback support for self test. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
-
Fuyun Liang authored
In fact, our implementation of mac loopback is the implementation of app loopback now. Current name is wrong. This patch renames mac loopback to app loopback. Signed-off-by:
-
Fuyun Liang authored
Our loop mode includes mac loop, serdes loop and phy loop. Not all of them are related with mac. This patch corrects their names. Signed-off-by:
-
Fuyun Liang authored
The extra mac address of pause param is used to do double check for pause frame. This patch set it to HW. If we do not do that, pfc pause frame will be transferred protocol stack when normal flow control mode is enabled. Signed-off-by:
-
Peng Li authored
This patch adds support for sctp checksum offload. Signed-off-by:
-
Arnd Bergmann authored
When B53_SERDES is a loadable module, a built-in srab driver still cannot reach it, so the previous fix is incomplete: b53_srab.c:(.text+0x3f4): undefined reference to `b53_serdes_init' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe64): undefined reference to `b53_serdes_link_state' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe74): undefined reference to `b53_serdes_link_set' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe88): undefined reference to `b53_serdes_an_restart' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea0): undefined reference to `b53_serdes_phylink_validate' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea4): undefined reference to `b53_serdes_config' Add a Kconfig dependency that forces srab to also be a module in this case, but allow it to be built-in when serdes is disabled or built-in. Fixes: 7a8c7f5c ("net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDES") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added runtime-pm support causes a harmless warning when CONFIG_PM is disabled: drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function] static int unimac_mdio_resume(struct device *d) drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function] static int unimac_mdio_suspend(struct device *d) Marking the functions as __maybe_unused is the easiest workaround and avoids adding #ifdef checks. Fixes: b78ac6ec ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by:
-
Arnd Bergmann authored
gcc points out that the length of the temporary buffer may not be sufficient for large numbers of leds: drivers/net/phy/mscc.c: In function 'vsc85xx_probe': drivers/net/phy/mscc.c:460:45: error: '-mode' directive writing 5 bytes into a region of size between 0 and 9 [-Werror=format-overflow=] ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i); ^~~~~ drivers/net/phy/mscc.c:460:9: note: 'sprintf' output between 19 and 28 bytes into a destination of size 22 ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ While we can make a reasonable assumption that the number of LEDs is small, the cost of making the buffer a little bigger is insignificant as well. Fixes: 11bfdabb ("net: phy: mscc: factorize code for LEDs mode") Signed-off-by:Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Arnd Bergmann authored
The patch that removed the only users of the oldadv/newadv variables accidentally left the now-unused declarations behind: drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c: In function 'dpaa_set_pauseparam': drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c:185:14: error: unused variable 'oldadv' [-Werror=unused-variable] drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c:185:6: error: unused variable 'newadv' [-Werror=unused-variable] Fixes: 70814e81 ("net: ethernet: Add helper for set_pauseparam for Asym Pause") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:873:5: warning: symbol 'aq_fw1x_set_power' was not declared. Should it be static? Fixes: a0da96c0 ("net: aquantia: implement WOL support") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/tls/tls_sw.c:655:16: warning: symbol 'get_rec' was not declared. Should it be static? Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/core/gen_stats.c:166:1: warning: symbol '___gnet_stats_copy_basic' was not declared. Should it be static? Fixes: 5e111210 ("net/core: Add new basic hardware counter") Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_delete_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:354:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qed/qed_ooo.c: In function 'qed_ooo_join_isles': drivers/net/ethernet/qlogic/qed/qed_ooo.c:463:30: warning: variable 'p_archipelago' set but not used [-Wunused-but-set-variable] Since commit 1eec2437 ("qed: Make OOO archipelagos into an array"), 'p_archipelago' is no longer in use. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== netlink: nested policy validation This adds nested policy validation, which lets you specify the nested attribute type, e.g. NLA_NESTED with sub-policy, or the new NLA_NESTED_ARRAY with sub-sub-policy. Changes in v2: * move setting the bad attr pointer/message into validate_nla() * remove the recursion patch since that's no longer needed * simply skip the generic bad attr pointer/message setting in case of nested nla_validate() failing since that could fail only due to validate_nla() failing inside, which already sets the extack information Changes in v3: * fix NLA_REJECT to have an error message if none is in policy ==================== Signed-off-by: -
Johannes Berg authored
Sometimes nested netlink attributes are just used as arrays, with the nla_type() of each not being used; we have this in nl80211 and e.g. NFTA_SET_ELEM_LIST_ELEMENTS. Add the ability to validate this type of message directly in the policy, by adding the type NLA_NESTED_ARRAY which does exactly this: require a first level of nesting but ignore the attribute type, and then inside each require a second level of nested and validate those attributes against a given policy (if present). Note that some nested array types actually require that all of the entries have the same index, this is possible to express in a nested policy already, apart from the validation that only the one allowed type is used. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Now that we have a validation_data pointer, and the len field in the policy is unused for NLA_NESTED, we can allow using them both to have nested validation. This can be nice in code, although we still have to use nla_parse_nested() or similar which would also take a policy; however, it also serves as documentation in the policy without requiring a look at the code. Signed-off-by:
-
Johannes Berg authored
This unifies the code between nla_parse() which sets the bad attribute pointer and an error message, and nla_validate() which only sets the bad attribute pointer. It also cleans up the code for NLA_REJECT and paves the way for nested policy validation, as it will allow us to easily skip setting the "generic" message without any extra args like the **error_msg now, just passing the extack through is now enough. While at it, remove the unnecessary label in nla_parse(). Suggested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Johannes Berg authored
The validation data is only used within the policy that should usually already be const, and isn't changed in any code that uses it. Therefore, make the validation_data pointer const. While at it, remove the duplicate variable in the bitfield validation that I'd otherwise have to change to const. Reviewed-by:
-
Johannes Berg authored
This isn't used anywhere, so we might as well get rid of it. Reviewed-by:
-
