Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mv_cesa driver does not request the CESA registers memory region.
Since we're about to add a new CESA driver, we need to make sure only one
of these drivers probe the CESA device, and requesting the registers memory
region is a good way to achieve that.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The variable tfm_count is accessed by multiple threads without
locking.  This patch converts it to an atomic_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

AEAD algorithm implementors need to figure out a given algorithm's
IV size and maximum authentication size.  During the transition
this is difficult to do as an algorithm could be new style or old
style.

This patch creates two helpers to make this easier.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a new AEAD IV generator echainiv.  It is intended
to replace the existing skcipher IV generator eseqiv.

If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.

Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a new IV generator seqniv which is identical to
seqiv except that it skips the IV when authenticating.  This is
intended to be used by algorithms such as rfc4106 that does the
IV authentication implicitly.

Note that the code used for seqniv is in fact identical to the
compatibility case for seqiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts the seqiv IV generator to work with the new
AEAD interface where IV generators are just normal AEAD algorithms.

Full backwards compatibility is paramount at this point since
no users have yet switched over to the new interface.  Nor can
they switch to the new interface until IV generation is fully
supported by it.

So this means we are adding two versions of seqiv alongside the
existing one.  The first one is the one that will be used when
the underlying AEAD algorithm has switched over to the new AEAD
interface.  The second one handles the current case where the
underlying AEAD algorithm still uses the old interface.

Both versions export themselves through the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address.  This is going
to be used for IV copying in AEAD IV generators.

There is no provision for partial overlaps.

This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch makes gcm use the default null skcipher instead of
allocating a new one for each tfm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a default null skcipher for users such as gcm
to perform copies on SG lists.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the basic structure of the new AEAD type.  Unlike
the current version, there is no longer any concept of geniv.  IV
generation will still be carried out by wrappers but they will be
normal AEAD algorithms that simply take the IPsec sequence number
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto layer already checks maxauthsize when setauthsize is
called.  So there is no need to check it again within setauthsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch uses the helper crypto_aead_maxauthsize instead of
directly dereferencing aead_alg.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the helper crypto_aead_maxauthsize to remove the
need to directly dereference aead_alg internals by AEAD implementors.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces references to aead_alg with old_aead_alg.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch is the first step in the introduction of a new AEAD
alg type.  Unlike normal conversions this patch only renames the
existing aead_alg structure because there are external references
to it.

Those references will be removed after this patch.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The primary user of AEAD, IPsec includes the IV in the AD in
most cases, except where it is implicitly authenticated by the
underlying algorithm.

The way it is currently implemented is a hack because we pass
the data in piecemeal and the underlying algorithms try to stitch
them back up into one piece.

This is why this patch is adding a new interface that allows a
single SG list to be passed in that contains everything so the
algorithm implementors do not have to stitch.

The new interface accepts a single source SG list and a single
destination SG list.  Both must be laid out as follows:

	AD, skipped data, plain/cipher text, ICV

The ICV is not present from the source during encryption and from
the destination during decryption.

For the top-level IPsec AEAD algorithm the plain/cipher text will
contain the generated (or received) IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the scatterwalk_ffwd helper which can create an
SG list that starts in the middle of an existing SG list.  The
new list may either be part of the existing list or be a chain
that latches onto part of the existing list.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Due to the recent update of the kernel crypto API header files,
locations of function definitions and their documentation have changed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

omap3 support is same as omap2, just with different IO address (specified in DT)
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch simply adds the MD5 IV in the md5 header.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the null checks for tfm, src, slen, dst, dlen; tfm will never
be null and the other fields are always expected to be set correctly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

One mistyped description and another mistyped target were corrected.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Don't need proc_fs.h
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Cleanup unused structure members.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Function pm_runtime_get_sync could fail and we need to check return
value to prevent kernel crash.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Avoid 64 bit mod operation, which won't work on 32 bit systems.
Simple subtraction can be used instead in this case.
Reported-By: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

-change req_ctx->nbuf from u64 to unsigned int to silence checker
warnings; this is safe since nbuf value is <= HASH_MAX_BLOCK_SIZE
-remove unused value read from TALITOS_CCPSR; there is no requirement
to read upper 32b before reading lower 32b of a 64b register;
SEC RM mentions: "reads can always be done by byte, word, or dword"
-remove unused return value of sg_to_link_tbl()
-change "len" parameter of map_single_talitos_ptr() and
to_talitos_ptr_len() to unsigned int; later, cpu_to_be16 will __force
downcast the value to unsigned short without any checker warning
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Check return value of scatterlist_sg_next(), i.e. don't rely solely
on number of bytes to be processed or number of scatterlist entries.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 7291a932.

The conversion to be16_add_cpu() is incorrect in case cryptlen is
negative due to premature (i.e. before addition / subtraction)
implicit conversion of cryptlen (int -> u16) leading to sign loss.

Cc: <stable@vger.kernel.org> # 3.10+
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>