- 16 Oct, 2021 2 commits
-
-
Paolo Abeni authored
The current default does not allowing additional subflows, mostly as a safety restriction to avoid uncontrolled resource consumption on busy servers. Still the system admin and/or the application have to opt-in to MPTCP explicitly. After that, they need to change (increase) the default maximum number of additional subflows. Let set that to reasonable default, and make end-users life easier. Additionally we need to update some self-tests accordingly. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tim Gardner authored
Coverity complains of a possible NULL dereference in mptcp_getsockopt_subflow_addrs(): 861 } else if (sk->sk_family == AF_INET6) { 3. returned_null: inet6_sk returns NULL. [show details] 4. var_assigned: Assigning: np = NULL return value from inet6_sk. 862 const struct ipv6_pinfo *np = inet6_sk(sk); Fix this by checking for NULL. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/231 Fixes: c11c5906 ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Cc: Florian Westphal <fw@strlen.de> Signed-off-by:Tim Gardner <tim.gardner@canonical.com> [mjm: Added WARN_ON_ONCE() to the unexpected case] Signed-off-by:
-
- 15 Oct, 2021 38 commits
-
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add support for IRQ coalescing This patch set adds support for interrupts coalescing in dpaa2-eth. The first patches add support for the hardware level configuration of the IRQ coalescing in the dpio driver, while the ones that touch the dpaa2-eth driver are responsible for the ethtool user interraction. With the adaptive IRQ coalescing in place and enabled we have observed the following changes in interrupt rates on one A72 core @2.2GHz (LX2160A) while running a Rx TCP flow. The TCP stream is sent on a 10Gbit link and the only cpu that does Rx is fully utilized. IRQ rate (irqs / sec) before: 4.59 Gbits/sec 24k after: 5.67 Gbits/sec 1.3k ==================== Signed-off-by: -
Ioana Ciornei authored
Add support for adaptive interrupt coalescing to the dpaa2-eth driver. First of all, ETHTOOL_COALESCE_USE_ADAPTIVE_RX is defined as a supported coalesce parameter and the requested state is configured through the dpio APIs added in the previous patch. Besides the ethtool API interaction, we keep track of how many bytes and frames are dequeued per CDAN (Channel Data Availability Notification) and update the Net DIM instance through the dpaa2_io_update_net_dim() API. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Use the generic dynamic interrupt moderation (dim) framework to implement adaptive interrupt coalescing on Rx. With the per-packet interrupt scheme, a high interrupt rate has been noted for moderate traffic flows leading to high CPU utilization. The dpio driver exports new functions to enable/disable adaptive IRQ coalescing on a DPIO object, to query the state or to update Net DIM with a new set of bytes and frames dequeued. Signed-off-by:
-
Ioana Ciornei authored
Use the newly exported dpio driver API to manually configure the IRQ coalescing parameters requested by the user. The .get_coalesce() and .set_coalesce() net_device callbacks are implemented and directly export or setup the rx-usecs on all the channels configured. Signed-off-by:
-
Ioana Ciornei authored
In DPAA2 based SoCs, the IRQ coalesing support per software portal has 2 configurable parameters: - the IRQ timeout period (QBMAN_CINH_SWP_ITPR): how many 256 QBMAN cycles need to pass until a dequeue interrupt is asserted. - the IRQ threshold (QBMAN_CINH_SWP_DQRR_ITR): how many dequeue responses in the DQRR ring would generate an IRQ. Add support for setting up and querying these IRQ coalescing related parameters. Signed-off-by:
-
Ioana Ciornei authored
Through the dpio_get_attributes() firmware call the dpio driver has access to the QBMAN clock frequency. Extend the structure which holds the firmware's response so that we can have access to this information. This will be needed in the next patches which also add support for interrupt coalescing which needs to be configured based on the frequency. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net/sched: implement L4S style ce_threshold_ect1 marking As suggested by Ingemar Johansson, Neal Cardwell, and others, fq_codel can be used for Low Latency, Low Loss, Scalable Throughput (L4S) with a small change. In ce_threshold_ect1 mode, only ECT(1) packets can be marked to CE if their sojourn time is above the threshold. ==================== Signed-off-by: -
Eric Dumazet authored
Add TCA_FQ_CODEL_CE_THRESHOLD_ECT1 boolean option to select Low Latency, Low Loss, Scalable Throughput (L4S) style marking, along with ce_threshold. If enabled, only packets with ECT(1) can be transformed to CE if their sojourn time is above the ce_threshold. Note that this new option does not change rules for codel law. In particular, if TCA_FQ_CODEL_ECN is left enabled (this is the default when fq_codel qdisc is created), ECT(0) packets can still get CE if codel law (as governed by limit/target) decides so. Section 4.3.b of current draft [1] states: b. A scheduler with per-flow queues such as FQ-CoDel or FQ-PIE can be used for L4S. For instance within each queue of an FQ-CoDel system, as well as a CoDel AQM, there is typically also ECN marking at an immediate (unsmoothed) shallow threshold to support use in data centres (see Sec.5.2.7 of [RFC8290]). This can be modified so that the shallow threshold is solely applied to ECT(1) packets. Then if there is a flow of non-ECN or ECT(0) packets in the per-flow-queue, the Classic AQM (e.g. CoDel) is applied; while if there is a flow of ECT(1) packets in the queue, the shallower (typically sub-millisecond) threshold is applied. Tested: tc qd replace dev eth1 root fq_codel ce_threshold_ect1 50usec netperf ... -t TCP_STREAM -- K dctcp tc -s -d qd sh dev eth1 qdisc fq_codel 8022: root refcnt 32 limit 10240p flows 1024 quantum 9212 target 5ms ce_threshold_ect1 49us interval 100ms memory_limit 32Mb ecn drop_batch 64 Sent 14388596616 bytes 9543449 pkt (dropped 0, overlimits 0 requeues 152013) backlog 0b 0p requeues 152013 maxpacket 68130 drop_overlimit 0 new_flow_count 95678 ecn_mark 0 ce_mark 7639 new_flows_len 0 old_flows_len 0 [1] L4S current draft: https://datatracker.ietf.org/doc/html/draft-ietf-tsvwg-l4s-archSigned-off-by:Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ingemar Johansson S <ingemar.s.johansson@ericsson.com> Cc: Tom Henderson <tomh@tomh.org> Cc: Bob Briscoe <in@bobbriscoe.net> Signed-off-by:
-
Eric Dumazet authored
skb_get_dsfield(skb) gets dsfield from skb, or -1 if an error was found. This is basically a wrapper around ipv4_get_dsfield() and ipv6_get_dsfield(). Used by following patch for fq_codel. Signed-off-by:
-
Eric Dumazet authored
Use of percpu_counter structure to track count of orphaned sockets is causing problems on modern hosts with 256 cpus or more. Stefan Bach reported a serious spinlock contention in real workloads, that I was able to reproduce with a netfilter rule dropping incoming FIN packets. 53.56% server [kernel.kallsyms] [k] queued_spin_lock_slowpath | ---queued_spin_lock_slowpath | --53.51%--_raw_spin_lock_irqsave | --53.51%--__percpu_counter_sum tcp_check_oom | |--39.03%--__tcp_close | tcp_close | inet_release | inet6_release | sock_close | __fput | ____fput | task_work_run | exit_to_usermode_loop | do_syscall_64 | entry_SYSCALL_64_after_hwframe | __GI___libc_close | --14.48%--tcp_out_of_resources tcp_write_timeout tcp_retransmit_timer tcp_write_timer_handler tcp_write_timer call_timer_fn expire_timers __run_timers run_timer_softirq __softirqentry_text_start As explained in commit cf86a086 ("net/dst: use a smaller percpu_counter batch for dst entries accounting"), default batch size is too big for the default value of tcp_max_orphans (262144). But even if we reduce batch sizes, there would still be cases where the estimated count of orphans is beyond the limit, and where tcp_too_many_orphans() has to call the expensive percpu_counter_sum_positive(). One solution is to use plain per-cpu counters, and have a timer to periodically refresh this cache. Updating this cache every 100ms seems about right, tcp pressure state is not radically changing over shorter periods. percpu_counter was nice 15 years ago while hosts had less than 16 cpus, not anymore by current standards. v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m, reported by kernel test robot <lkp@intel.com> Remove unused socket argument from tcp_too_many_orphans() Fixes: dd24c001 ("net: Use a percpu_counter for orphan_count") Signed-off-by:Stefan Bach <sfb@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Matt Johnston authored
mctp_key_alloc() returns a key already referenced. The mctp_route_input() path receives a packet for a bind socket and allocates a key. It passes the key to mctp_key_add() which takes a refcount and adds the key to lists. mctp_route_input() should then release its own refcount when setting the key pointer to NULL. In the mctp_alloc_local_tag() path (for mctp_local_output()) we similarly need to unref the key before returning (mctp_reserve_tag() takes a refcount and adds the key to lists). Fixes: 73c61845 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by:
Matt Johnston <matt@codeconstruct.com.au> Reviewed-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
David S. Miller authored
Ansuel Smith says: ==================== Multiple improvement for qca8337 switch This series is the final step of a long process of porting 80+ devices to use the new qca8k driver instead of the hacky qca one based on never merged swconfig platform. Some background to justify all these additions. QCA used a special binding to declare raw initval to set the swich. I made a script to convert all these magic values and convert 80+ dts and scan all the needed "unsupported regs". We find a baseline where we manage to find the common and used regs so in theory hopefully we don't have to add anymore things. We discovered lots of things with this, especially about how differently qca8327 works compared to qca8337. In short, we found that qca8327 have some problem with suspend/resume for their internal phy. It instead sets some dedicated regs that suspend the phy without setting the standard bit. First 4 patch are to fix this. There is also a patch about preferring master. This is directly from the original driver and it seems to be needed to prevent some problem with the pause frame. Every ipq806x target sets the mac power sel and this specific reg regulates the output voltage of the regulator. Without this some instability can occur. Some configuration (for some reason) swap mac6 with mac0. We add support for this. Also, we discovered that some device doesn't work at all with pll enabled for sgmii line. In the original code this was based on the switch revision. In later revision the pll regs were decided based on the switch type (disabled for qca8327 and enabled for qca8337) but still some device had that disabled in the initval regs. Considering we found at least one qca8337 device that required pll disabled to work (no traffic problem) we decided to introduce a binding to enable pll and set it only with that. Lastly, we add support for led open drain that require the power-on-sel to set. Also, some device have only the power-on-sel set in the initval so we add also support for that. This is needed for the correct function of the switch leds. Qca8327 have a special reg in the pws regs that set it to a reduced 48pin layout. This is needed or the switch doesn't work. These are all the special configuration we find on all these devices that are from various targets. Mostly ath79, ipq806x and bcm53xx. Changes v7: - Fix missing newline in yaml - Handle error with wrong cpu port detected - Move yaml commit as last to fix bot error Changes v6: - Convert Documentation to yaml - Add extra check for cpu port and invalid phy mode - Add co developed by tag to give credits to Matthew Changes v5: - Swap patch. Document first then implement. - Fix some grammar error reported. - Rework function. Remove phylink mac_config DT scan and move everything to dedicated function in probe. - Introduce new logic for delay selection where is also supported with internal delay declared and rgmii set as phy mode - Start working on ymal conversion. Will later post this in v6 when we finally take final decision about mac swap. Changes v4: - Fix typo in SGMII falling edge about using PHY id instead of switch id Changes v3: - Drop phy patches (proposed separateley) - Drop special pwr binding. Rework to ipq806x specific - Better describe compatible and add serial print on switch chip - Drop mac exchange. Rework falling edge and move it to mac_config - Add support for port 6 cpu port. Drop hardcoded cpu port to port0 - Improve port stability with sgmii. QCA source have intenal delay also for sgmii - Add warning with pll enabled on wrong configuration Changes v2: - Reword Documentation patch to dt-bindings - Propose first 2 phy patch to net - Better describe and add hint on how to use all the new bindings - Rework delay scan function and move to phylink mac_config - Drop package48 wrong binding - Introduce support for qca8328 switch - Fix wrong binding name power-on-sel - Return error on wrong config with led open drain and ignore-power-on-sel not set ==================== Signed-off-by: -
Matthew Hagan authored
Convert the qca8k bindings to YAML format. Signed-off-by:
Matthew Hagan <mnhagan88@gmail.com> Co-developed-by:
Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by:
-
Ansuel Smith authored
Fix warning now that we have qca8k switch Documentation using yaml. Signed-off-by:
-
Ansuel Smith authored
Move ports related config to dedicated struct to keep things organized. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ansuel Smith authored
QCA original code report port instability and sa that SGMII also require to set internal delay. Generalize the rgmii delay function and apply the advised value if they are not defined in DT. Signed-off-by:
-
Ansuel Smith authored
QCA8328 switch is the bigger brother of the qca8327. Same regs different chip. Change the function to set the correct pin layout and introduce a new match_data to differentiate the 2 switch as they have the same ID and their internal PHY have the same ID. Signed-off-by:
-
Ansuel Smith authored
QCA8328 is the bigger brother of qca8327. Document the new compatible binding and add some information to understand the various switch compatible. Signed-off-by:
-
Ansuel Smith authored
Some qca8327 switch require to force the ignore of power on sel strapping. Some switch require to set the led open drain mode in regs instead of using strapping. While most of the device implements this using the correct way using pin strapping, there are still some broken device that require to be set using sw regs. Introduce a new binding and support these special configuration. As led open drain require to ignore pin strapping to work, the probe fails with EINVAL error with incorrect configuration. Signed-off-by:
-
Ansuel Smith authored
Document new binding qca,ignore-power-on-sel used to ignore power on strapping and use sw regs instead. Document qca,led-open.drain to set led to open drain mode, the qca,ignore-power-on-sel is mandatory with this enabled or an error will be reported. Signed-off-by:
-
Ansuel Smith authored
Support enabling PLL on the SGMII CPU port. Some device require this special configuration or no traffic is transmitted and the switch doesn't work at all. A dedicated binding is added to the CPU node port to apply the correct reg on mac config. Fail to correctly configure sgmii with qca8327 switch and warn if pll is used on qca8337 with a revision greater than 1. Signed-off-by:
-
Ansuel Smith authored
Document qca,sgmii-enable-pll binding used in the CPU nodes to enable SGMII PLL on MAC config. Signed-off-by:
-
Ansuel Smith authored
Future proof commit. This switch have 2 CPU ports and one valid configuration is first CPU port set to sgmii and second CPU port set to rgmii-id. The current implementation detects delay only for CPU port zero set to rgmii and doesn't count any delay set in a secondary CPU port. Drop the current delay scan function and move it to the sgmii parser function to generalize and implicitly add support for secondary CPU port set to rgmii-id. Introduce new logic where delay is enabled also with internal delay binding declared and rgmii set as PHY mode. Signed-off-by:
-
Ansuel Smith authored
Currently CPU port is always hardcoded to port 0. This switch have 2 CPU ports. The original intention of this driver seems to be use the mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration where device have connected only the CPU port 6. To skip the introduction of a new binding, rework the driver to address the secondary CPU port as primary and drop any reference of hardcoded port. With configuration of mac06 exchange, just skip the definition of port0 and define the CPU port as a secondary. The driver will autoconfigure the switch to use that as the primary CPU port. Signed-off-by:
-
Ansuel Smith authored
The switch now support CPU port to be set 6 instead of be hardcoded to 0. Document support for it and describe logic selection. Signed-off-by:
-
Ansuel Smith authored
Add support for this in the qca8k driver. Also add support for SGMII rx/tx clock falling edge. This is only present for pad0, pad5 and pad6 have these bit reserved from Documentation. Add a comment that this is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and setting falling in port0 applies to both configuration with sgmii used for port0 or port6. Co-developed-by:
-
Ansuel Smith authored
Add names and descriptions of additional PORT0_PAD_CTRL properties. qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock phase to failling edge. Co-developed-by:
-
Ansuel Smith authored
Add missing mac power sel support needed for ipq8064/5 SoC that require 1.8v for the internal regulator port instead of the default 1.5v. If other device needs this, consider adding a dedicated binding to support this. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
-
Colin Ian King authored
The variable err is being initialized with a value that is never read, it is being updated immediately afterwards. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yunsheng Lin authored
As the 32-bit arch with 64-bit DMA seems to rare those days, and page pool might carry a lot of code and complexity for systems that possibly. So disable dma mapping support for such systems, if drivers really want to work on such systems, they have to implement their own DMA-mapping fallback tracking outside page_pool. Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Srujana Challa says: ==================== octeontx2-af: Miscellaneous changes for CPT This patchset consists of miscellaneous changes for CPT. First patch enables the CPT HW interrupts, second patch adds support for CPT LF teardown in non FLR path and final patch does CPT CTX flush in FLR handler. v2: - Fixed a warning reported by kernel test robot. ==================== Link: https://lore.kernel.org/r/20211013055621.1812301-1-schalla@marvell.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Srujana Challa authored
Adds support to flush or invalidate CPT CTX entries as part of FLR and also provides a mailbox to flush CPT CTX entries in case of graceful exit. This patch also adds support for AF -> CPT PF uplink mailbox messages and adds a new mbox message to submit a CPT instruction from AF. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
-
Nithin Dabilpuram authored
Perform CPT LF teardown in non FLR path as well via cpt_lf_free() Currently CPT LF teardown and reset sequence is only done when FLR is handled with CPT LF still attached. This patch also fixes cpt_lf_alloc() to set EXEC_LDWB in CPT_AF_LFX_CTL2 when being completely overwritten as that is the default value and is better for performance. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
-
Srujana Challa authored
This patch enables and registers interrupt handler for CPT HW interrupts. Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Randy Dunlap authored
On i386, when builtin (not a loadable module), the winbond-840 driver inspects boot_cpu_data to see what CPU family it is running on, and then acts on that data. The "family" struct member (x86) does not exist when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’: ../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’ if (boot_cpu_data.x86 <= 4) { Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: linux-um@lists.infradead.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
On a UML build, the igc_ptp driver uses CONFIG_X86_TSC for timestamp conversion. The function that is used is not available on UML builds, so have the function use the default system_counterval_t timestamp instead for UML builds. Prevents this build error on UML: ../drivers/net/ethernet/intel/igc/igc_ptp.c: In function ‘igc_device_tstamp_to_system’: ../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: implicit declaration of function ‘convert_art_ns_to_tsc’ [-Werror=implicit-function-declaration] return convert_art_ns_to_tsc(tstamp); ../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: incompatible types when returning type ‘int’ but ‘struct system_counterval_t’ was expected return convert_art_ns_to_tsc(tstamp); Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
-
Randy Dunlap authored
On i386, when builtin (not a loadable module), the fealnx driver inspects boot_cpu_data to see what CPU family it is running on, and then acts on that data. The "family" struct member (x86) does not exist when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/ethernet/fealnx.c: In function ‘netdev_open’: ../drivers/net/ethernet/fealnx.c:861:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’ Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver") Signed-off-by:
-
Jiasheng Jiang authored
Adding comment to avoid the misusing of netvsc_xdp_xmit(). Otherwise the value of skb->queue_mapping could be 0 and then the return value of skb_get_rx_queue() could be MAX_U16 cause by overflow. Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1634174786-1810351-1-git-send-email-jiasheng@iscas.ac.cnSigned-off-by:
-
