- 07 Nov, 2016 1 commit
-
-
Masahiro Yamada authored
The header facilities_src.h is only included from gen_facilities.c and the tool is compiled with the following extra options: HOSTCFLAGS_gen_facilities.o += -Wall $(LINUXINCLUDE) Please note $(LINUXINCLUDE) is expanded into build options including: -include $(srctree)/include/linux/kconfig.h So, the Makefile always forces the tool to include kconfig.h, i.e., the #include <linux/kconfig.h> directive in the header is redundant. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 31 Oct, 2016 9 commits
-
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: arch/s390/Kconfig:config S390_GUEST arch/s390/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We replace module.h with moduleparam.h since the file does declare some module_param() and leaving that as-is is currently the easiest way to remain compatible with existing boot arg use cases. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pci/hotplug/Kconfig:config HOTPLUG_PCI_S390 drivers/pci/hotplug/Kconfig: bool "System z PCI Hotplug Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't exchange module.h for init.h or export.h since the file does not contain any initcalls or EXPORT of symbols. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Makefile currently controlling compilation of this code is obj-y meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We replace module.h with init.h and export.h since the file does export some symbols. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: arch/s390/Kconfig:config S390_HYPFS_FS arch/s390/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Build testing indicated the presence of module.h was masking an implicit include of kobject.h, hence the addition of that. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Makefile currently controlling compilation of this code is obj-y, meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/s390/char/Kconfig:config SCLP_TTY drivers/s390/char/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/s390/char/Kconfig:config TN3215 drivers/s390/char/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: arch/s390/Kconfig:config CRASH_DUMP arch/s390/Kconfig: bool "kernel crash dumps" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init wasn't even being used by this file, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: linux-s390@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Makefile currently controlling compilation of this code is: obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \ fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o ccw_device-objs += device.o device_fsm.o device_ops.o ccw_device-objs += device_id.o device_pgid.o device_status.o obj-y += ccw_device.o cmf.o ...meaning that the files here are not being built as modular. Lets remove the couple traces of modular infrastructure use, so that when reading the code there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We replace module.h with export.h where the file does export some symbols. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Arnd Bergmann <arndb@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
-
- 28 Oct, 2016 30 commits
-
-
Jan Höppner authored
The function dasd_ro_store() calls set_disk_ro() to set the device in question read-only. Since set_disk_ro() might sleep, we can't call it while holding a lock. However, we also can't simply check if the device, block, and gdp references are valid before we call set_disk_ro() because an offline processing might have been started in the meanwhile which will destroy those references. In order to reliably call set_disk_ro() we have to ensure several things: - Still check validity of the mentioned references but additionally check if offline processing is running and bail out accordingly. Also, do this while holding the device lock. - To ensure that the block device is still safe after the lock, increase the open_count while still holding the device lock. Reviewed-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by:
-
Jan Höppner authored
The reference to a device in question may get lost when the extended error reporting (EER) attribute is being enabled/disabled while the device is set offline at the same time. This is due to missing refcounting and incorrect locking. Fix this by the following: - In dasd_eer_store() get the device directly and handle the refcount accordingly. - Move the lock in dasd_eer_enable() up so we can ensure safe processing. - Check if the device is being set offline and return with -EBUSY if so. - While at it, change the return code from -EPERM to -EMEDIUMTYPE as suggested by a FIXME, since that is what we're actually checking. Reviewed-by:
-
Jan Höppner authored
Before we set a device offline, the open_count for the block device is checked and certain flags are checked and set as well. However, this is all done without holding any lock. Potentially, if the open_count was checked but the DASD_FLAG_OFFLINE wasn't set yet, a different process might want to increase the open_count depending on whether DASD_FLAG_OFFLINE is set or not in the meanwhile. This is quite racy and can lead to the loss of the device for that process and subsequently lead to a panic. Fix this by checking the open_count and setting the offline flags while holding the ccwdev lock. Reviewed-by:
-
Jan Höppner authored
When setting certain attributes, we actually set the according feature flag. Do this by using dasd_set_feature() at a few occurrences and remove duplicate code. In dasd_set_feature() dasd_find_busid() is used to retrieve the devmap for the device in question. Combined with the change above, this would require the device to be set online at least once so that a devmap is being created. Change that by using dasd_devmap_from_cdev() instead, which uses dasd_find_busid() first and will create a devmap accordingly if there is none yet. Reviewed-by:
-
Jan Höppner authored
simple_strtoul() has been marked obsolete for quite some time now. Replace a few last occurrences with kstrtouint(). Reviewed-by:
-
Dong Jia Shi authored
Clean up DEV_STATE_SENSE_PGID related code, since it's not used anymore. Everything related to path verification is handled within DEV_STATE_VERIFY. Signed-off-by:
Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Acked-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
On STP sync events the TOD clock will jump in time, either forward or backward. The TOD clocksource claims to be continuous but in case of an STP sync with a negative offset it is not. Subtract the offset injected by the STP sync check from the result of the TOD clocksource to make it continuous again. Add code to drift the offset towards zero with a fixed rate, steering 1 second in ~9 hours. Suggested-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The last_update_clock time stamp in the lowcore should be adjusted by the TOD clock delta that is created by the clock synchronization. Otherwise the calculation of the steal time will be incorrect. Signed-off-by: -
Martin Schwidefsky authored
Merge clock_sync_cpu into stp_sync_clock and split out the update of the global and per-CPU clock fields into clock_sync_global and clock_sync_local. Signed-off-by: -
Jan Höppner authored
block->request_queue is used many times in dasd_setup_queue. Define a separate variable to increase readability a bit and to make it better reusable. Reviewed-by:
-
Jan Höppner authored
Currently the block queue value max_segments is set to -1L, which is then implicitly casted to unsigned short in blk_queue_max_segments. This results in 65535 (64k) max_segments. Even though the resulting value is correct, setting it implicitly using -1L is rather confusing. Set the value explicitly using the USHRT_MAX macro instead. Reviewed-by:
-
Michael Holzheu authored
Since commit d86bd1be ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk cris/arch-v32: cryptocop: print a hex number after a 0x prefix ipack: print a hex number after a 0x prefix block: DAC960: print a hex number after a 0x prefix fs: exofs: print a hex number after a 0x prefix lib/genalloc.c: start search from start of chunk mm: memcontrol: do not recurse in direct reclaim CREDITS: update credit information for Martin Kepplinger proc: fix NULL dereference when reading /proc/<pid>/auxv mm: kmemleak: ensure that the task stack is not freed during scanning lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB latent_entropy: raise CONFIG_FRAME_WARN by default kconfig.h: remove config_enabled() macro ipc: account for kmem usage on mqueue and msg mm/slab: improve performance of gathering slabinfo stats mm: page_alloc: use KERN_CONT where appropriate mm/list_lru.c: avoid error-path NULL pointer deref h8300: fix syscall restarting kcov: properly check if we are in an interrupt mm/slab: fix kmemcg cache creation delayed issue
-
Dimitri Sivanich authored
Would like to have this be a decimal number. Link: http://lkml.kernel.org/r/20161026134746.GA30169@sgi.comSigned-off-by:
Dimitri Sivanich <sivanich@sgi.com> Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Uwe Kleine-König authored
It makes the result hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-6-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
It makes the result hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
It makes the message hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
It makes the message hard to interpret correctly if a base 10 number is prefixed by 0x. So change to a hex number. Link: http://lkml.kernel.org/r/20161026125658.25728-2-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Daniel Mentz authored
gen_pool_alloc_algo() iterates over the chunks of a pool trying to find a contiguous block of memory that satisfies the allocation request. The shortcut if (size > atomic_read(&chunk->avail)) continue; makes the loop skip over chunks that do not have enough bytes left to fulfill the request. There are two situations, though, where an allocation might still fail: (1) The available memory is not contiguous, i.e. the request cannot be fulfilled due to external fragmentation. (2) A race condition. Another thread runs the same code concurrently and is quicker to grab the available memory. In those situations, the loop calls pool->algo() to search the entire chunk, and pool->algo() returns some value that is >= end_bit to indicate that the search failed. This return value is then assigned to start_bit. The variables start_bit and end_bit describe the range that should be searched, and this range should be reset for every chunk that is searched. Today, the code fails to reset start_bit to 0. As a result, prefixes of subsequent chunks are ignored. Memory allocations might fail even though there is plenty of room left in these prefixes of those other chunks. Fixes: 7f184275 ("lib, Make gen_pool memory allocator lockless") Link: http://lkml.kernel.org/r/1477420604-28918-1-git-send-email-danielmentz@google.comSigned-off-by:Daniel Mentz <danielmentz@google.com> Reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Johannes Weiner authored
On 4.0, we saw a stack corruption from a page fault entering direct memory cgroup reclaim, calling into btrfs_releasepage(), which then tried to allocate an extent and recursed back into a kmem charge ad nauseam: [...] btrfs_releasepage+0x2c/0x30 try_to_release_page+0x32/0x50 shrink_page_list+0x6da/0x7a0 shrink_inactive_list+0x1e5/0x510 shrink_lruvec+0x605/0x7f0 shrink_zone+0xee/0x320 do_try_to_free_pages+0x174/0x440 try_to_free_mem_cgroup_pages+0xa7/0x130 try_charge+0x17b/0x830 memcg_charge_kmem+0x40/0x80 new_slab+0x2d9/0x5a0 __slab_alloc+0x2fd/0x44f kmem_cache_alloc+0x193/0x1e0 alloc_extent_state+0x21/0xc0 __clear_extent_bit+0x2b5/0x400 try_release_extent_mapping+0x1a3/0x220 __btrfs_releasepage+0x31/0x70 btrfs_releasepage+0x2c/0x30 try_to_release_page+0x32/0x50 shrink_page_list+0x6da/0x7a0 shrink_inactive_list+0x1e5/0x510 shrink_lruvec+0x605/0x7f0 shrink_zone+0xee/0x320 do_try_to_free_pages+0x174/0x440 try_to_free_mem_cgroup_pages+0xa7/0x130 try_charge+0x17b/0x830 mem_cgroup_try_charge+0x65/0x1c0 handle_mm_fault+0x117f/0x1510 __do_page_fault+0x177/0x420 do_page_fault+0xc/0x10 page_fault+0x22/0x30 On later kernels, kmem charging is opt-in rather than opt-out, and that particular kmem allocation in btrfs_releasepage() is no longer being charged and won't recurse and overrun the stack anymore. But it's not impossible for an accounted allocation to happen from the memcg direct reclaim context, and we needed to reproduce this crash many times before we even got a useful stack trace out of it. Like other direct reclaimers, mark tasks in memcg reclaim PF_MEMALLOC to avoid recursing into any other form of direct reclaim. Then let recursive charges from PF_MEMALLOC contexts bypass the cgroup limit. Link: http://lkml.kernel.org/r/20161025141050.GA13019@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Martin Kepplinger authored
Content and employer changed. Link: http://lkml.kernel.org/r/1477304102-28830-1-git-send-email-martin.kepplinger@ginzinger.comSigned-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Leon Yu authored
Reading auxv of any kernel thread results in NULL pointer dereferencing in auxv_read() where mm can be NULL. Fix that by checking for NULL mm and bailing out early. This is also the original behavior changed by recent commit c5317167 ("proc: switch auxv to use of __mem_open()"). # cat /proc/2/auxv Unable to handle kernel NULL pointer dereference at virtual address 000000a8 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 3 PID: 113 Comm: cat Not tainted 4.9.0-rc1-ARCH+ #1 Hardware name: BCM2709 task: ea3b0b00 task.stack: e99b2000 PC is at auxv_read+0x24/0x4c LR is at do_readv_writev+0x2fc/0x37c Process cat (pid: 113, stack limit = 0xe99b2210) Call chain: auxv_read do_readv_writev vfs_readv default_file_splice_read splice_direct_to_actor do_splice_direct do_sendfile SyS_sendfile64 ret_fast_syscall Fixes: c5317167 ("proc: switch auxv to use of __mem_open()") Link: http://lkml.kernel.org/r/1476966200-14457-1-git-send-email-chianglungyu@gmail.comSigned-off-by:
Leon Yu <chianglungyu@gmail.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
-
Catalin Marinas authored
Commit 68f24b08 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") may cause the task->stack to be freed during kmemleak_scan() execution, leading to either a NULL pointer fault (if task->stack is NULL) or kmemleak accessing already freed memory. This patch uses the new try_get_task_stack() API to ensure that the task stack is not freed during kmemleak stack scanning. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=173901. Fixes: 68f24b08 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") Link: http://lkml.kernel.org/r/1476266223-14325-1-git-send-email-catalin.marinas@arm.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
CAI Qian <caiqian@redhat.com> Tested-by:
-
Dmitry Vyukov authored
KASAN uses stackdepot to memorize stacks for all kmalloc/kfree calls. Current stackdepot capacity is 16MB (1024 top level entries x 4 pages on second level). Size of each stack is (num_frames + 3) * sizeof(long). Which gives us ~84K stacks. This capacity was chosen empirically and it is enough to run kernel normally. However, when lots of configs are enabled and a fuzzer tries to maximize code coverage, it easily hits the limit within tens of minutes. I've tested for long a time with number of top level entries bumped 4x (4096). And I think I've seen overflow only once. But I don't have all configs enabled and code coverage has not reached maximum yet. So bump it 8x to 8192. Since we have two-level table, memory cost of this is very moderate -- currently the top-level table is 8KB, with this patch it is 64KB, which is negligible under KASAN. Here is some approx math. 128MB allows us to memorize ~670K stacks (assuming stack is ~200b). I've grepped kernel for kmalloc|kfree|kmem_cache_alloc|kmem_cache_free| kzalloc|kstrdup|kstrndup|kmemdup and it gives ~60K matches. Most of alloc/free call sites are reachable with only one stack. But some utility functions can have large fanout. Assuming average fanout is 5x, total number of alloc/free stacks is ~300K. Link: http://lkml.kernel.org/r/1476458416-122131-1-git-send-email-dvyukov@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Baozeng Ding <sploving1@gmail.com> Signed-off-by:
-
Kees Cook authored
When building with the latent_entropy plugin, set the default CONFIG_FRAME_WARN to 2048, since some __init functions have many basic blocks that, when instrumented by the latent_entropy plugin, grow beyond 1024 byte stack size on 32-bit builds. Link: http://lkml.kernel.org/r/20161018211216.GA39687@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
The use of config_enabled() is ambiguous. For config options, IS_ENABLED(), IS_REACHABLE(), etc. will make intention clearer. Sometimes config_enabled() has been used for non-config options because it is useful to check whether the given symbol is defined or not. I have been tackling on deprecating config_enabled(), and now is the time to finish this work. Some new users have appeared for v4.9-rc1, but it is trivial to replace them: - arch/x86/mm/kaslr.c replace config_enabled() with IS_ENABLED() because CONFIG_X86_ESPFIX64 and CONFIG_EFI are boolean. - include/asm-generic/export.h replace config_enabled() with __is_defined(). Then, config_enabled() can be removed now. Going forward, please use IS_ENABLED(), IS_REACHABLE(), etc. for config options, and __is_defined() for non-config symbols. Link: http://lkml.kernel.org/r/1476616078-32252-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Garnier <thgarnie@google.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Aristeu Rozanski authored
When kmem accounting switched from account by default to only account if flagged by __GFP_ACCOUNT, IPC mqueue and messages was left out. The production use case at hand is that mqueues should be customizable via sysctls in Docker containers in a Kubernetes cluster. This can only be safely allowed to the users of the cluster (without the risk that they can cause resource shortage on a node, influencing other users' containers) if all resources they control are bounded, i.e. accounted for. Link: http://lkml.kernel.org/r/1476806075-1210-1-git-send-email-arozansk@redhat.comSigned-off-by:
Aristeu Rozanski <arozansk@redhat.com> Reported-by:
Stefan Schimanski <sttts@redhat.com> Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Stefan Schimanski <sttts@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Aruna Ramakrishna authored
On large systems, when some slab caches grow to millions of objects (and many gigabytes), running 'cat /proc/slabinfo' can take up to 1-2 seconds. During this time, interrupts are disabled while walking the slab lists (slabs_full, slabs_partial, and slabs_free) for each node, and this sometimes causes timeouts in other drivers (for instance, Infiniband). This patch optimizes 'cat /proc/slabinfo' by maintaining a counter for total number of allocated slabs per node, per cache. This counter is updated when a slab is created or destroyed. This enables us to skip traversing the slabs_full list while gathering slabinfo statistics, and since slabs_full tends to be the biggest list when the cache is large, it results in a dramatic performance improvement. Getting slabinfo statistics now only requires walking the slabs_free and slabs_partial lists, and those lists are usually much smaller than slabs_full. We tested this after growing the dentry cache to 70GB, and the performance improved from 2s to 5ms. Link: http://lkml.kernel.org/r/1472517876-26814-1-git-send-email-aruna.ramakrishna@oracle.comSigned-off-by:
Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joe Perches authored
Recent changes to printk require KERN_CONT uses to continue logging messages. So add KERN_CONT where necessary. [akpm@linux-foundation.org: coding-style fixes] Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Link: http://lkml.kernel.org/r/c7df37c8665134654a17aaeb8b9f6ace1d6db58b.1476239034.git.joe@perches.comReported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
-
Alexander Polakov authored
As described in https://bugzilla.kernel.org/show_bug.cgi?id=177821: After some analysis it seems to be that the problem is in alloc_super(). In case list_lru_init_memcg() fails it goes into destroy_super(), which calls list_lru_destroy(). And in list_lru_init() we see that in case memcg_init_list_lru() fails, lru->node is freed, but not set NULL, which then leads list_lru_destroy() to believe it is initialized and call memcg_destroy_list_lru(). memcg_destroy_list_lru() in turn can access lru->node[i].memcg_lrus, which is NULL. [akpm@linux-foundation.org: add comment] Signed-off-by:
Alexander Polakov <apolyakov@beget.ru> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
