- 21 Jan, 2020 1 commit
-
-
Kuninori Morimoto authored
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blqzym4w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 17 Jan, 2020 14 commits
-
-
Damian van Soelen authored
The snprintf calls filling cht_rt5645_cpu_dai_name / cht_rt5645_codec_aif_name always fill them with the same string ("ssp0-port" resp "rt5645-aif2") so instead of keeping these buffers around and making cpus->dai_name / codecs->dai_name point to this, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Damian van Soelen <dj.vsoelen@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115164619.101705-5-hdegoede@redhat.comAcked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Jordy Ubink authored
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name always fill them with the same string ("rt56*-aif2" resp. ssp0-port"). So instead of keeping these buffers around and making codecs->dai_name / cpus->dai_name point to them, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Jordy Ubink <jordyubink@hotmail.nl> Signed-off-by:
-
Nariman Etemadi authored
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name always fill them with the same string ("rt56*-aif2" resp. ssp0-port"). So instead of keeping these buffers around and making codecs->dai_name / cpus->dai_name point to them, simply update the *->dai_name pointers to directly point to a string constant containing the desired string. Signed-off-by:Nariman Etemadi <narimantos@gmail.com> Signed-off-by:
-
Erik Bussing authored
The 16 and 24 bit paths in byt_rt5640_codec_fixup are mostly identical, introduce a local bits variable to address the only difference and move the common bits out of the if ... else ... . Signed-off-by:
Erik Bussing <eabbussing@outlook.com> Signed-off-by:
-
Stephan Gerhold authored
PM8916 has three TX inputs that each have an (optional) internal RBIAS resistor. MIC BIAS Internal1/2 (for TX1/2) are already supported. TX3 does not have its own MIC BIAS supply, instead it is also supplied from MIC_BIAS1. Now that we have simplified the MIC BIAS Internal* implementation we can easily add support for it: Add a MIC BIAS Internal3 supply that enables the internal RBIAS resistor on TX3, and make sure to also enable the MIC_BIAS1 supply. Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200114181229.42302-2-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference the same register, and have a part of their initialization sequence duplicated. For example, the sequence for enabling MIC BIAS Internal1 is: I1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN) I2. Enable internal RBIAS (TX1_INT_RBIAS_EN bit in CDC_A_MICB_1_INT_RBIAS) The sequence for enabling MIC BIAS External1 is: E1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN) (E2. Ideally, make sure internal RBIAS is disabled. However, this should not happen in practice because DAPM will disable unused supplies...) Right now we have: SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0, ...) // I1 SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, ...) // E1 and I2 is done in the PM event handler (pm8916_wcd_analog_enable_micbias_int1). We can simplify this by defining a common DAPM supply for I1/E1 ("MIC_BIAS1"), and one DAPM supply for I2 ("MIC BIAS Internal1"). Additional DAPM routes ensure that we also enable the MIC_BIAS1 supply for the internal and external pull up resistor. Another advantage of this is that we now disable the internal RBIAS when it is not needed. This makes it much easier to add support for MIC BIAS Internal3 as a next step. Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: -
Mark Brown authored
ASoC: Fixes for v5.5 This is mostly driver specific fixes, plus an error handling fix in the core. There is a rather large diffstat for the stm32 SAI driver, this is a very large but mostly mechanical update which wraps every register access in the driver to allow a fix to the locking which avoids circular locks, the active change is much smaller and more reasonably sized.
-
Ravulapati Vishnu vardhan rao authored
I2S SP instance has separate BCLK and LRCLK for Tx and Rx. Creating additional DAI for Rx. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1579261510-12580-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: d1ede064 ("ASoC: rt715: add RT715 codec driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200117024149.75515-1-weiyongjun1@huawei.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 320b8b0d ("ASoC: rt711: add rt711 codec driver") Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 7d2a5f9a ("ASoC: rt700: add rt700 codec driver") Signed-off-by:
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200116021142.149000-1-yuehaibing@huawei.comSigned-off-by:
-
Shuming Fan authored
The QFN package is a new one. There is a different initial setting to the chip of QFN and WLCSP package. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.comSigned-off-by:
-
Charles Keepax authored
Should the write to MADERA_OUTPUT_ENABLES_1 fail and out_clamp[0] not be set an additional error message will be printed. Clear the ret variable to avoid this. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200114161841.451-3-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 15 Jan, 2020 2 commits
-
-
Mark Brown authored
Merge branch 'topic/equal' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into asoc-5.6
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200115120258.0e535fcb@canb.auug.org.auAcked-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
- 14 Jan, 2020 23 commits
-
-
Marek Vasut authored
Support multiple endpoints on SGTL5000 codec port when used in of_graph context. This patch allows to share the codec port between two CPU DAIs. Example: Custom STM32MP157C board uses SGTL5000 audio codec. This codec is connected to two serial audio interfaces, which are configured either as rx or tx. From AsoC point of view the topolgy is the following: // 2 CPU DAIs (SAI2A/B), 1 Codec (SGTL5000) Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0 Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0 In the DT two endpoints have to be associated to the codec port: sgtl5000_port: port { sgtl5000_tx_endpoint: endpoint@0 { remote-endpoint = <&sai2a_endpoint>; }; sgtl5000_rx_endpoint: endpoint@1 { remote-endpoint = <&sai2b_endpoint>; }; }; However, when the audio graph card parses the codec nodes, it expects to find DAI interface indexes matching the endpoints indexes. The current patch forces the use of DAI id 0 for both endpoints, which allows to share the codec DAI between the two CPU DAIs for playback and capture streams respectively. Signed-off-by: -
Shengjiu Wang authored
There are two asrc module in imx8qm & imx8qxp, each module has different clock configuration, and the DMA type is EDMA. So in this patch, we define the new clocks, refine the clock map, and include struct fsl_asrc_soc_data for different soc usage. The EDMA channel is fixed with each dma request, one dma request corresponding to one dma channel. So we need to request dma channel with dma request of asrc module. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/f33dfe3157b5ab200e09ccbf9ab73d31fac6664b.1575452454.git.shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Add compatible string "fsl,imx8qm-asrc" for imx8qm platform, "fsl,imx8qxp-asrc" for imx8qxp platform. There are two asrc modules in imx8qm & imx8qxp, the clock mapping is different for each other, so add new property "fsl,asrc-clk-map" to distinguish them. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/b9352edb014c1ee8530c0fd8829c2b044b3da649.1575452454.git.shengjiu.wang@nxp.comSigned-off-by:
-
Marek Vasut authored
Comparing the voltage of VDDA and VDDIO to determine whether or not to enable VDDC manual override is insufficient. This is a problem in case the VDDA is supplied from different regulator than VDDIO, while both report the same voltage to the regulator framework. In that case where VDDA and VDDIO is supplied by different regulators, the VDDC manual override must not be applied. Fixes: b6319b06 ("ASoC: sgtl5000: Fix charge pump source assignment") Signed-off-by:
-
Mark Brown authored
Merge tag 'regulator-eq' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into asoc-5.6 regulator: add regulator_equal()
-
Marek Vasut authored
Add regulator_is_equal() helper to compare whether two regulators are the same. This is useful for checking whether two separate regulators in a driver are actually the same supply. Signed-off-by:
-
Paul Cercueil authored
Add jz4770-codec driver to support the internal CODEC found in the JZ4770 SoC from Ingenic. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Maarten ter Huurne <maarten@treewalker.org> Link: https://lore.kernel.org/r/20191224002708.1207884-2-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
Convert ingenic,jz4740-codec.txt and ingenic,jz4725b-codec.txt to one single ingenic,codec.yaml file, since they share the same binding. Add the ingenic,jz4770-codec compatible string in the process. Signed-off-by:
-
Dmitry Torokhov authored
devm_fwnode_get_index_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20200103011754.GA260926@dtor-wsSigned-off-by:
-
Pierre-Louis Bossart authored
Fix GCC warning with W=1 sound/soc/intel//boards/bytcr_rt5651.c:659:40: warning: ‘byt_rt5651_dai_params’ defined but not used [-Wunused-const-variable=] Signed-off-by:
-
Pierre-Louis Bossart authored
Fix GCC warning with W=1 sound/soc/intel//boards/bytcr_rt5640.c:936:40: warning: ‘byt_rt5640_dai_params’ defined but not used [-Wunused-const-variable=] Signed-off-by:
-
Pierre-Louis Bossart authored
fix GCC warning with W=1 sound/soc/intel//boards/bytcht_es8316.c:237:40: warning: ‘byt_cht_es8316_dai_params’ defined but not used [-Wunused-const-variable=] Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/skl_rt286.c:171] -> [sound/soc/intel/boards/skl_rt286.c:214]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/skl_rt286.c:171] -> [sound/soc/intel/boards/skl_rt286.c:250]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning [sound/soc/intel/boards/skl_nau88l25_ssm4567.c:277] -> [sound/soc/intel/boards/skl_nau88l25_ssm4567.c:320]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/skl_nau88l25_ssm4567.c:277] -> [sound/soc/intel/boards/skl_nau88l25_ssm4567.c:337]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/skl_nau88l25_max98357a.c:257] -> [sound/soc/intel/boards/skl_nau88l25_max98357a.c:142]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/skl_nau88l25_max98357a.c:257] -> [sound/soc/intel/boards/skl_nau88l25_max98357a.c:318]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c:764]: (style) Variable 'ret' is assigned a value that is never used. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c:293] -> [sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c:336]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_rt5663_max98927.c:358] -> [sound/soc/intel/boards/kbl_rt5663_max98927.c:401]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/kbl_rt5663_max98927.c:358] -> [sound/soc/intel/boards/kbl_rt5663_max98927.c:457]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_rt5660.c:282] -> [sound/soc/intel/boards/kbl_rt5660.c:141]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning [sound/soc/intel/boards/kbl_da7219_max98927.c:179]: (style) Variable 'ret' is assigned a value that is never used. [sound/soc/intel/boards/kbl_da7219_max98927.c:1098]: (style) Variable 'i' is assigned a value that is never used. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_da7219_max98927.c:432] -> [sound/soc/intel/boards/kbl_da7219_max98927.c:282]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/kbl_da7219_max98927.c:432] -> [sound/soc/intel/boards/kbl_da7219_max98927.c:494]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_da7219_max98927.c:340] -> [sound/soc/intel/boards/kbl_da7219_max98927.c:348]: (style) Variable 'ret' is reassigned a value before the old one has been used. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: [sound/soc/intel/boards/kbl_da7219_max98357a.c:257] -> [sound/soc/intel/boards/kbl_da7219_max98357a.c:144]: (style) Local variable 'channels' shadows outer variable [sound/soc/intel/boards/kbl_da7219_max98357a.c:257] -> [sound/soc/intel/boards/kbl_da7219_max98357a.c:308]: (style) Local variable 'channels' shadows outer variable Signed-off-by:
-
