- 11 Oct, 2010 29 commits
-
-
Johannes Berg authored
Since this small buffer isn't used for DMA, we can simply allocate it on the stack, it just needs to be 16 bytes of which only 8 will be used for WEP40 keys. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
wl1251 is grown up now and can have its own room^H^H^H^Hdirectory. Signed-off-by:
Kalle Valo <kvalo@adurom.com> Signed-off-by:
-
Kalle Valo authored
wl1271 driver is under heavy development but on the other hand the older wl1251 driver is currently considered more as a legacy driver. To make it easier to develop wl1271 features move wl1251 to it's own directory, drivers/net/wireless/wl1251. There are no functional changes, only moving of files. One regression is that Kconfig won't be updated automatically and user needs to enable wl1251 manually with an older config file. Signed-off-by:
-
Kalle Valo authored
In preparation of moving wl1251 out from drivers/net/wireless/wl12xx create a separate copy of wl12xx_80211.h. This file should not even exist, we should instead use generic ieee80211 definitions. This will be fixed in the future so that the file can be removed. Signed-off-by:
-
Christian Lamparter authored
In the past, carl9170 has been plagued by mysterious ghosts. e.g.: wlan4: deauthenticated from 02:04:d8:3c:ac:c1 (Reason: 0) Apparently, the AP sent us a bogus deauthentication notification. But upon closer inspection the "management frame" turned out to be a corrupted scrap of an unsuccessful A-MPDU. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
The total/fatal error bit was erroneously prefixed with AR9170_RX_ERROR instead of AR9170_RX_STATUS. Luckily, the hardware specification confirmed that the 0x80 flag will never be set for mac->error. So, it was always just a dead branch. This patch also imports the latest version of shared wlan.h header from the firmware git. Signed-off-by:
-
Christian Lamparter authored
This patch replaces several identical frame drop paths with a single shared rx frame error handler. Signed-off-by:
-
Helmut Schaa authored
The patches "rt2x00: Improve TX status entry validation" and "rt2x00: rework tx status handling in rt2800pci" together were causing problems with tx status processing in rt2800pci: phy1 -> rt2800pci_txdone: Warning - Got TX status for an empty queue 3, dropping phy1 -> rt2800pci_txdone: Warning - Got TX status for an unavailable queue 7, dropping Fix this by using the correct field definition for getting the QID out of the tx status report. Reported-by:
Luis Correia <luis.f.correia@gmail.com> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Tested-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Helmut Schaa authored
There is no need to initialize qidx to zero as it will ever be overwritten by the correct value. Signed-off-by:
-
Helmut Schaa authored
This is an error condition that is not supposed to happen. Hence, it is safe to add unlikely to this check. Signed-off-by:
-
Helmut Schaa authored
Signed-off-by:
-
Helmut Schaa authored
Since no skb will be mapped for RX and TX at the same time we can simply shortcut the check for SKBDESC_DMA_MAPPED_TX. Signed-off-by:
-
Helmut Schaa authored
Signed-off-by:
-
Steve deRosier authored
This patch updates IEEE802.11 mesh constants to be consistent with newly approved values. It modifies some values, as well as adds many new constants in preparation for updating mesh code to the current 802.11s drafts. ANA numbers were taken from: https://mentor.ieee.org/802.11/dcn/09/11-09-0031-12-0000-ana-database-assigned-number-authority.xls A few notes are in order: 1. This will break backwards compatibility with existing Linux kernels as over-the-air constants have changed. 2. Some old and obsolete constants have been retained for now as the mesh code itself hasn't been updated yet to the new 802.11s draft. This was desired to keep the existing mesh scheme working until it can be updated. Adding the approved values is the first step in updating the mesh code. 3. Obsolete constants have been clearly marked. 4. All ANA approved 802.11s constants have been added. Signed-off-by:
Steve deRosier <steve@cozybit.com> Signed-off-by:
-
Felix Fietkau authored
Results for the active channel are updated whenever a new survey dump is requested, the old data is kept to allow multiple processes to make their own channel utilization averages. All other channels only contain the data for the last time that the hardware was on the channel, i.e. the last scan result or other off-channel activity. Running a background scan does not clear the data for the active channel. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
This prevents random memory corruption if the number of channels ever gets changed without an update to the internal channel array size. Signed-off-by:
-
Felix Fietkau authored
Using these, user space can calculate a relative channel utilization with arbitrary intervals by regularly taking snapshots of the survey results. Signed-off-by:
-
Christian Lamparter authored
Several serve threading problems in the current release reorder timer implementation have been discovered. A lengthy discussion - which lists some of the pitfalls and possible solutions - can be found at: http://marc.info/?t=128635927000001 But due to the complicated nature of the subject and the imminent advent of a new -rc cycle, it was decided to disable the feature for the time being. Signed-off-by:
-
Christian Lamparter authored
This patch not only fixes a null-pointer de-reference that would be triggered by a PLINK_OPEN frame with mis- matching/incompatible mesh configuration, but also responds correctly to non-compatible PLINK_OPEN frames by generating a PLINK_CLOSE with the right reason code. The original bug was detected by smatch. ( http://repo.or.cz/w/smatch.git ) net/mac80211/mesh_plink.c +574 mesh_rx_plink_frame(168) error: we previously assumed 'sta' could be null. Cc: <stable@kernel.org> Reviewed-and-Tested-by:
Javier Cardona <javier@cozybit.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
-
Felix Fietkau authored
Instead of keeping track of wraparound, clear the counters on every access and keep separate deltas for ANI and later survey use. Also moves the function for calculating the 'listen time' for ANI Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
Ben Greear authored
Otherwise, if there is an AP and a STATION, and AP is removed, the NIC will not revert back to STATION mode. Reported-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Ben Greear authored
Helps debug multi-VIF scenarios. Signed-off-by:
-
Ben Greear authored
Some stats for /proc/net/wireless (and wext in general) are not being set. This patch addresses a few of those with values easily obtained from mac80211 core. Signed-off-by:
-
Ben Greear authored
Old messages didn't mention the device in question. Signed-off-by:
-
Johannes Berg authored
This reverts commit 5a254ffe. The commit failed to take into account that allocated wireless devices (wiphys) are not added into the device list upon allocation, but only when they are registered. Therefore, it opened up a race between allocating and registering a name, so that if two processes allocate and register concurrently ("alloc, alloc, register, register" rather than "alloc, register, alloc, register") the code will attempt to use the same name twice. Signed-off-by:
-
-
- 08 Oct, 2010 2 commits
-
-
Ohad Ben-Cohen authored
Add required suspend/resume support to prevent the SDIO core from removing our card completely during system suspend. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Tested-by:
Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by:
-
Ohad Ben-Cohen authored
Enable runtime PM for the wl1271 SDIO device. We request power whenever the WLAN interface is brought up, and release it after the WLAN interface is taken down. As a result, power is released immediately after probe returns, since at that point power has not been explicitly requested yet (i.e. the WLAN interface is still down). Signed-off-by:
-
- 07 Oct, 2010 9 commits
-
-
Shanyu Zhao authored
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by:
Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Shanyu Zhao authored
iwlagn driver uses the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as the chain noise reset calibration index and IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE+1 as the chain noise gain calibration index, if not specified by the TLV value in the new firmware format. However, this is broken if we need to add more calibrations like the temperature offset calibration because we increased IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE by 1. To fix this issue, define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE and use it as the calibration index instead. We still keep the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as a sanity check for the TLV value given by ucode. Signed-off-by:
-
Wey-Yi Guy authored
For experimental uCode, it should work with the driver if driver has experimental uCode support option enabled; remove the API version checking. Signed-off-by: -
Johannes Berg authored
The recent scanning code shuffle accidentally moved the SCAN_HW bit setting _after_ the PAN parameters are modified, which means that they don't take the scan into account -- fix that. Signed-off-by:
-
Johannes Berg authored
The function is used exactly once, and the caller doesn't even need the special check, it can be simplified to a simple bit check. Signed-off-by:
-
Johannes Berg authored
A number of declarations in iwl-core.h should be in agn specific files, and also rename the iwl-calib.h file to iwl-agn-calib.h to better reflect that it belongs to agn. Signed-off-by:
-
Johannes Berg authored
Since all devices share the same operation here, there's no need to call it indirectly. Signed-off-by:
-
Johannes Berg authored
The set_pwr_src operation is only ever used from within the same sub-driver that it is declared in, so it can just be called directly instead of being an operation. Also, it is never called to set the power source to V_aux, so change the two functions accordingly (but keep the V_aux code for documentation purposes in a comment). Signed-off-by:
-
Johannes Berg authored
This operation is only ever called from set_hw_params, which is also already based on the config/ops, so that there's no need to have a separate set_ct_kill op and we can just call the right ct_threshold function. Signed-off-by:
-
