- 23 Sep, 2021 7 commits
-
-
José Roberto de Souza authored
We were not completely following the selective fetch programming sequence, here some things we were doing wrong: - not programming plane selective fetch a PSR2_MAN_TRK_CTL registers when doing a modeset - programming PSR2_MAN_TRK_CTL out of vblank With this changes the last remainig underrun found in Alderlake-P is fixed. Bspec: 55229 Tested-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-2-jose.souza@intel.com
-
José Roberto de Souza authored
Specification asks for DC_STATE_DEBUG_MASK_CORES to be set for all platforms that supports DMC, not only for geminilake and broxton. While at is also taking the oportunity to simply the code. BSpec: 7402 BSpec: 49436 Reviewed-by:
Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
Imre Deak authored
Add support for remapping CCS FBs on ADL-P to remove the restriction of the power-of-two sized stride and the 2MB surface offset alignment for these FBs. We can only remap the tiles on the main surface, not the tiles on the CCS surface, so userspace has to generate the CCS surface aligning to the POT size padded main surface stride (by programming the AUX pagetable accordingly). For the required AUX pagetable setup, this requires that either the main surface stride is 8 tiles or that the stride is 16 tiles aligned (= 64 kbytes, the area mapped by one AUX PTE). v2: - Init intel_remapped_info::plane_alignment only for remapped views and do this from intel_fb_view_init(). Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-6-imre.deak@intel.com
-
Imre Deak authored
Follow the usual new->old order in intel_fb_stride_alignment() platform check ladder. Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Imre Deak authored
Atm the DPT object can accommodate only one VMA, so the VMA offset will be always 0. Add an assert for this. Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Imre Deak authored
At the moment CCS FB strides must be power-of-two sized, but a follow-up change will add support remapping these FBs, allowing the FB passed in by userspace to have a non-POT sized stride. For these remapped FBs we can only remap the main surface, not the CCS surface. This means that userspace has to always generate the CCS surface aligning to the POT stride padded main surface (by setting up the CCS AUX pagetables accordingly). Adjust the CCS surface stride check to enforce this. No functional change. v2: - Fix the gen12_ccs_aux_stride() is not static sparse warning. Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Imre Deak authored
The tile size for all surface types is 4 kbyte (or 2 kbyte on old platforms), with the exception of the TGL/ADL CCS surface where the tile size is 64 bytes. To be able to remap CCS FBs the CCS surface tile needs to be defined as 4 kbyte as well (the granularity of GTT pages in a remapped view). The only place using the dimension of the 64 byte CCS area is the initial check for the main vs. CCS plane origin coordinate match. To prepare for adding support for remapping CCS FBs let's call the 64 byte CCS area a 'tile block' and add a helper to retrieve the dimensions for it. No functional change. Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
- 22 Sep, 2021 5 commits
-
-
Ville Syrjälä authored
The w/a database lists this for both ctg and elk. So let's apply it to elk as well. And add the w/a name. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-5-ville.syrjala@linux.intel.comReviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
The intention was to check whether the primary plane is enabled without any sprites planes being enabled. Instead we ended up checking whether just any one of the planes is enabled. g4x isn't vlv/chv and cxsr only works with the primary plane. Fix the check to examine the bitmask of active planes rather than the number of bits set in said bitmask. Signed-off-by:
-
Ville Syrjälä authored
Be consistent in that active_planes bitmask fits in a u8. Signed-off-by:
-
Ville Syrjälä authored
intel_plane_atomic_calc_changes() deals with both the old and new crtc/plane states. Make the variable names reflect that more clearly. Signed-off-by:
-
Tejas Upadhyay authored
Add helper function with returns if HDR mode in on Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907113658.1351456-1-tejaskumarx.surendrakumar.upadhyay@intel.com [vsyrjala: fix up alignment to match codingstyle] Signed-off-by:
-
- 20 Sep, 2021 12 commits
-
-
Jani Nikula authored
There's a new register pair for 128b/132b mode where you need to set the pixel clock in Hz. v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper Bspec: 54128 Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a2902cc188973f022f282f2a77e693afdecefb5a.1631191763.git.jani.nikula@intel.com
-
Jani Nikula authored
128b/132b has a separate transcoder DDI mode, which also requires the MST transport select to be set. Note that we'll use DP MST also for single-stream 128b/132b. Having the FDI and 128b/132b modes share the register mode value complicates things a bit. v2: - Use HAS_DP20 abstraction for 128b/132b mode (Ville) - Use intel_dp_is_uhbr() helper Bspec: 50493 Reviewed-by:
-
Jani Nikula authored
Let's abstract the DP 2.0 feature. Initially just DG2. Reviewed-by:
-
Jani Nikula authored
Set the DP 2.0 128b/132b channel encoding for UHBR rates. v2: Fix UHBR port clock check, use intel_dp_is_uhbr() Bspec: 54128 Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
UHBR rates and 128b/132b channel encoding go hand in hand. v2: Fix check for >= UHBR rates using intel_dp_is_uhbr() (Ville) Reviewed-by:
-
Jani Nikula authored
128b/132b channel encoding has separate TPS1 and TPS2, although the DPCD register values coincide with 8b/10b TPS1 and TPS2 values. Use 128b/132b TPS2 for channel equalization. v2: Use intel_dp_is_uhbr Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> # v1 Signed-off-by:
-
Jani Nikula authored
Helpful abstraction to avoid duplication. Reviewed-by:
-
Jani Nikula authored
Unfortunately, the DP 2.0 128b/132b DDI mode selection in the register conflicts with FDI. Since we have to deal with both meanings in the same code, for different platforms, clarify the macro name so we don't forget. Bspec: 50493 Reviewed-by:
-
Jani Nikula authored
The DP 2.0 128b/132b channel coding uses TX FFE presets instead of vswing and pre-emphasis. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Jani Nikula authored
DP 2.0 brings some new DPCD addresses for PHY repeaters. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Jani Nikula authored
Extend the use of extended receiver cap at 0x2200 to cover MAIN_LINK_CHANNEL_CODING_CAP in 0x2206, in case an implementation hides the DP 2.0 128b/132b channel encoding cap. v2: Extend to DP_RECEIVER_CAP_SIZE (Ville) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
-
Jani Nikula authored
The bw code equals link_rate / 0.27 Gbps only for 8b/10b link rates. Handle DP 2.0 UHBR rates as special cases, though this is not pretty. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 17 Sep, 2021 6 commits
-
-
José Roberto de Souza authored
Wa_16014451276 fixes the starting coordinate for PSR2 selective updates. CHICKEN_TRANS definition of the workaround bit has a wrong name based on workaround definition and HSD. Wa_14014971508 allows the screen to continue to be updated when coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept set in PSR2_MAN_TRK_CTL. Wa_16012604467 fixes underruns when exiting PSR2 when it is in one of its internal states. Wa_14014971508 is still in pending status in BSpec but by the time this is reviewed and ready to be merged it will be finalized. v2: - renamed register to ADLP_1_BASED_X_GRANULARITY - added comment about all ADL-P supported panels being 1 based X granularity BSpec: 54369 BSpec: 50054 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
José Roberto de Souza authored
drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage() returns the full plane area in case no damaged area was set by userspace or it was discarted by driver. This is important to fix the rendering of userspace applications that does frontbuffer rendering and notify driver about dirty areas but do not set any dirty clips. With this we don't need to worry about to check and mark the whole area as damaged in page flips. Another important change here is the move of drm_atomic_add_affected_planes() call, it needs to called late otherwise the area of all the planes would be added to pipe_clip and not saving power. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Not sure why but when moving the cursor fast it causes some artifacts of the cursor to be left in the cursor path, adding some pixels above the cursor to the damaged area fixes the issue, so leaving this as a workaround until proper fix is found. This is reproducile on TGL and ADL-P. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
-
José Roberto de Souza authored
BSpec states that the minimum number of frames before selective update is 2, so making sure this minimum limit is fulfilled. BSpec: 50422 Reviewed-by:
-
José Roberto de Souza authored
As the SU_REGION_START begins at 0, the SU_REGION_END should be number of lines - 1. BSpec: 50424 Reviewed-by:
-
Anusha Srivatsa authored
The release notes mentions that this version- 1. Fix for unblock indication to punit. 2. Robustness fix for DC6/6v abort scenarios. Cc: Imre Deak <Imre Deak <imre.deak@intel.com>> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
- 16 Sep, 2021 1 commit
-
-
Chris Wilson authored
Free all the DMC payloads, not just DMC_MAIN. unreferenced object 0xffff88ff32d4d800 (size 1024): comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s) hex dump (first 32 bytes): 40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff88ff0bde4000 (size 1024): comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s) hex dump (first 32 bytes): 40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 Fixes: 3d5928a1 ("drm/i915/xelpd: Pipe A DMC plugging") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
- 15 Sep, 2021 8 commits
-
-
Radhakrishna Sripada authored
Earlier while calculating derated bw we would use 90% of the calculated bw. Starting ADL-P we use a non standard derating. Updating the formulae to reflect the same. Bspec: 64631 v2: Use the new derating value only for ADL-P(MattR) Fixes: 4d32fe2f ("drm/i915/adl_p: Update memory bandwidth parameters") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Extract the "panel transcoder" bitmask into a helper. We'll have a couple of uses for this later. Signed-off-by:
-
Ville Syrjälä authored
Pass the crtc+cpu_transcoder rather than the crtc state to intel_dsc_power_domain(). This should allow us to reuse it during readout as well. Signed-off-by:
-
Ville Syrjälä authored
Add the _if_enabled() counterpart to with_intel_display_power(). Signed-off-by:
-
Ville Syrjälä authored
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder. Bigjoiner is making life even more confusing by introducing a N:1 relationship between pipes and transcoders. In that case we only enable/configure the transcoder corresponding to the master pipe. Let's do some renames to make it clear we're dealing with the transcoder rather than pipe when it comes to PIPECONF/TRANSCONF. I decided to leave the _cpu_ part out from the function/macro names since the PCH transcoder related stuff already has a _pch_ in their name. So shouldn't be possible to confuse them. Signed-off-by:
-
Ville Syrjälä authored
hsw_crtc_compute_clock() has become spaghetti. Flatten it a bit to make it at least semi-legible. Signed-off-by:
-
Ville Syrjälä authored
Suck the "do we need bigjoiner?" checks into a helper instead of duplicating them in two differentt places. v2: s/use/need/ (Jani) Signed-off-by:
-
Rodrigo Vivi authored
Catch-up on 5.15-rc1 and sync with drm-intel-gt-next to prepare the PXP topic branch. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 14 Sep, 2021 1 commit
-
-
José Roberto de Souza authored
New DG1 PCI id. BSpec: 44463 Cc: Caz Yokoyama <caz.yokoyama@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
