- 21 Mar, 2018 9 commits
-
-
Alexander Sergeyev authored
commit e3b3121f upstream. In accordance with Intel's microcode revision guidance from March 6 MCU rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors that share CPUID 506E3. Signed-off-by:
Alexander Sergeyev <sergeev917@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kyle Huey <me@kylehuey.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180313193856.GA8580@localhost.localdomainSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Whitcroft authored
commit a14bff13 upstream. In the following commit: 9e0e3c51 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit b5069782 upstream. POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by:
Stas Sergeev <stsp@list.ru> Reported-by:
Bart Oldeman <bartoldeman@gmail.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 5ed92a8a ("x86/vm86: Use the normal pt_regs area for vm86") Link: http://lkml.kernel.org/r/ce95f40556e7b2178b6bc06ee9557827ff94bd28.1521003603.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit 78393fdd upstream. POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by:
-
Ricardo Neri authored
commit a9e017d5 upstream. The STR and SLDT instructions are not valid when running on virtual-8086 mode and generate an invalid operand exception. These two instructions are protected by the Intel User-Mode Instruction Prevention (UMIP) security feature. In protected mode, if UMIP is enabled, these instructions generate a general protection fault if called from CPL > 0. Linux traps the general protection fault and emulates the instructions sgdt, sidt and smsw; but not str and sldt. These tests are added to verify that the emulation code does not emulate these two instructions but the expected invalid operand exception is seen. Tests fallback to exit with INT3 in case emulation does happen. Signed-off-by:
Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by:
-
Ricardo Neri authored
commit 9390afeb upstream. Certain user space programs that run on virtual-8086 mode may utilize instructions protected by the User-Mode Instruction Prevention (UMIP) security feature present in new Intel processors: SGDT, SIDT and SMSW. In such a case, a general protection fault is issued if UMIP is enabled. When such a fault happens, the kernel traps it and emulates the results of these instructions with dummy values. The purpose of this new test is to verify whether the impacted instructions can be executed without causing such #GP. If no #GP exceptions occur, we expect to exit virtual-8086 mode from INT3. The instructions protected by UMIP are executed in representative use cases: a) displacement-only memory addressing b) register-indirect memory addressing c) results stored directly in operands Unfortunately, it is not possible to check the results against a set of expected values because no emulation will occur in systems that do not have the UMIP feature. Instead, results are printed for verification. A simple verification is done to ensure that results of all tests are identical. Signed-off-by:
-
Andy Lutomirski authored
commit 327d53d0 upstream. Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by:
-
Kirill A. Shutemov authored
commit 7958b224 upstream. CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
commit 1da961d7 upstream. CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory Encryption. Signed-off-by:
-
- 19 Mar, 2018 31 commits
-
-
Greg Kroah-Hartman authored
-
Anusha Srivatsa authored
commit 2afba81c upstream. Since the firmwares are not yet released to public repo, disable them on Geminilake. v2: Remove the firmware versions (Michal) v3: Remove unwanted defines (Rodrigo) Correct commit message (Michal) Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Fixes: 90f192c8 ("drm/i915/GuC/GLK: Load GuC on GLK") Fixes: db5ba0d8 ("drm/i915/GLK/HuC: Load HuC on GLK") Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1515006225-13003-1-git-send-email-anusha.srivatsa@intel.com (cherry picked from commit a76050a4) Signed-off-by:
-
Sinan Kaya authored
[ Upstream commit 38680bc6 ] Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by:
Sinan Kaya <okaya@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1b19b951 ] A warning that I thought I had fixed before occasionally comes back in rare randconfig builds (I found 7 instances in the last 100000 builds, originally it was much more frequent): drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr': drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (order <= mr_cache_max_order(dev)) { ^ drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized] I've looked at all those findings again and noticed that they are all with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns an error unconditionally and we never initialize or use those variables. This triggers a condition in gcc iff mr_umem_get() is partially but not entirely inlined, which in turn depends on the exact combination of optimization settings. This is a known problem with gcc, with no easy solution in the compiler, so this adds another workaround that should be more reliable than my previous attempt. Returning an error from mlx5_ib_reg_user_mr() earlier means that we can completely bypass the logic that caused the warning, the compiler can now see that the variable is never accessed. Fixes: 14ab8896 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Mimi Zohar authored
[ Upstream commit b7e27bc1 ] Custom policies can require file signatures based on LSM labels. These files are normally created and only afterwards labeled, requiring them to be signed. Instead of requiring file signatures based on LSM labels, entire filesystems could require file signatures. In this case, we need the ability of writing new files without requiring file signatures. The definition of a "new" file was originally defined as any file with a length of zero. Subsequent patches redefined a "new" file to be based on the FILE_CREATE open flag. By combining the open flag with a file size of zero, this patch relaxes the file signature requirement. Fixes: 1ac202e9 ima: accept previously set IMA_NEW_FILE Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit 2ce77d16 ] Things can explode for locktorture if the user does combinations of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming we always want to torture writer threads. Reported-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
-
SeongJae Park authored
[ Upstream commit 2adfa421 ] The 'configinit.sh' script checks the format of optional argument for the build directory, printing an error message if the format is not valid. However, the error message uses the wrong variable, indicating an empty string even though the user entered a non-empty (but erroneous) string. This commit fixes the script to use the correct variable. Fixes: c87b9c60 ("rcutorture: Add KVM-based test framework") Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 92ff4264 ] Packets that don't have dest mac as the mac of the master device should not be entertained by the IPvlan rx-handler. This is mostly true as the packet path mostly takes care of that, except when the master device is a virtual device. As demonstrated in the following case - ip netns add ns1 ip link add ve1 type veth peer name ve2 ip link add link ve2 name iv1 type ipvlan mode l2 ip link set dev iv1 netns ns1 ip link set ve1 up ip link set ve2 up ip -n ns1 link set iv1 up ip addr add 192.168.10.1/24 dev ve1 ip -n ns1 addr 192.168.10.2/24 dev iv1 ping -c2 192.168.10.2 <Works!> ip neigh show dev ve1 ip neigh show 192.168.10.2 lladdr <random> dev ve1 ping -c2 192.168.10.2 <Still works! Wrong!!> This patch adds that missing check in the IPvlan rx-handler. Reported-by:
Amit Sikka <amit.sikka@ericsson.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit a0e94598 ] Destination is a kernel pointer and source - a userland one in _copy_from_user(); _copy_to_user() is the other way round. Fixes: d597580d ("generic ...copy_..._user primitives") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 23a18525 ] mmc_test disables the command queue because none of the tests use the command queue. However the Reset Test will re-enable it, so disable it in that case too. Fixes: 9d4579a8 ("mmc: mmc_test: Disable Command Queue while mmc_test is used") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 65a12b3a ] We should be finishing the loop with timeout set to zero but because this is a post-op we finish with timeout == -1. Fixes: 1082e270 ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Horia Geantă authored
[ Upstream commit 9db09e3b ] Fix below warnings on ARMv7 by using %zu for printing size_t values: drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG qm_sg_ents, CAAM_QI_MAX_AEAD_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ Fixes: eb9ba37d ("crypto: caam/qi - handle large number of S/Gs case") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Luca Coelho authored
[ Upstream commit c7976f52 ] In the ieee80211_setup_sdata() we check if the interface type is valid and, if not, call BUG(). This should never happen, but if there is something wrong with the code, it will not be caught until the bug happens when an interface is being set up. Calling BUG() is too extreme for this and a WARN_ON() would be better used instead. Change that. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Adiel Aloni authored
[ Upstream commit e16ea4bb ] Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll, only if PS_ENABLED was set before. This is required due to commit c9491367b759 ("mac80211: always update the PM state of a peer on MGMT / DATA frames") that enforces the ap to check only mgmt/data frames ps bit, and then update station's power save accordingly. When sending only ps-poll (control frame) the ap will not be aware that the station entered power save. Setting ps enable before triggering ps_poll, will send NDP with PM bit enabled first. Signed-off-by:
Adiel Aloni <adiel.aloni@intel.com> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit 8516673a ] Before accessing the GGTT we must flush the PTE writes and make them visible to the chipset, or else the indirect access may end up in the wrong page. In commit 3497971a ("agp/intel: Flush chipset writes after updating a single PTE"), we noticed corruption of the uploads for pwrite and for capturing GPU error states, but it was presumed that the explicit calls to intel_gtt_chipset_flush() were sufficient for the execbuffer path. However, we have not been flushing the chipset between the PTE writes and access via the GTT itself. For simplicity, do the flush after any PTE update rather than try and batch the flushes on a just-in-time basis. References: 3497971a ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.ukSigned-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit f5bbcd53 ] Describe the GPIO used to reset the Ethernet PHY for EthernetAVB. This allows the driver to reset the PHY during probe and after system resume. This fixes Ethernet operation after resume from s2ram on Salvator-XS, where the enable pin of the regulator providing PHY power is connected to PRESETn, and PSCI powers down the SoC during system suspend. On Salvator-X, the enable pin is always pulled high, but the driver may still need to reset the PHY if this wasn't done by the bootloader before. Inspired by patches in the BSP for the individual Salvator-X/XS boards by Kazuya Mizuguchi. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit acb1feab ] When an interrupt is returning to a soft-disabled context (which can happen for non-maskable interrupts or synchronous interrupts), it goes through the motions of soft-disabling again, including calling TRACE_DISABLE_INTS (i.e., trace_hardirqs_off()). This is not necessary, because we must already be soft-disabled in the interrupt context, it also may be causing crashes in the irq tracing code to re-enter as an nmi. Replace it with a warning to ensure that soft-interrupts are still disabled. Fixes: 7c0482e3 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit b9eab08d ] When attempting to load a livepatch module, I got the following error: module_64: patch_module: Expect noop after relocate, got 3c820000 The error was triggered by the following code in unregister_netdevice_queue(): 14c: 00 00 00 48 b 14c <unregister_netdevice_queue+0x14c> 14c: R_PPC64_REL24 net_set_todo 150: 00 00 82 3c addis r4,r2,0 GCC didn't insert a nop after the branch to net_set_todo() because it's a sibling call, so it never returns. The nop isn't needed after the branch in that case. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-and-tested-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
-
Yong Zhao authored
[ Upstream commit 5108d768 ] Kobject created using kobject_create_and_add() can be freed using kobject_put() when there is no referenece any more. However, kobject memory allocated with kzalloc() has to set up a release callback in order to free it when the counter decreases to 0. Otherwise it causes memory leak. Signed-off-by:
Yong Zhao <yong.zhao@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 72d24955 ] When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 7bbde83b ] In qdisc_graft_qdisc a "new" qdisc is attached and the 'qdisc_destroy' operation is called on the old qdisc. The destroy operation will wait a rcu grace period and call qdisc_rcu_free(). At which point gso_cpu_skb is free'd along with all stats so no need to zero stats and gso_cpu_skb from the graft operation itself. Further after dropping the qdisc locks we can not continue to call qdisc_reset before waiting an rcu grace period so that the qdisc is detached from all cpus. By removing the qdisc_reset() here we get the correct property of waiting an rcu grace period and letting the qdisc_destroy operation clean up the qdisc correctly. Note, a refcnt greater than 1 would cause the destroy operation to be aborted however if this ever happened the reference to the qdisc would be lost and we would have a memory leak. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit fdaa767a ] Since commit 39e6c820 ("net: solve a NAPI race") napi has been able to be rescheduled within napi_complete_done() even in non-busypoll case, but virtnet_poll() always enabled interrupts before complete, and when napi was rescheduled within napi_complete_done() it did not disable interrupts. This caused more interrupts when event idx is disabled. According to commit cbdadbbf ("virtio_net: fix race in RX VQ processing") we cannot place virtqueue_enable_cb_prepare() after NAPI_STATE_SCHED is cleared, so disable interrupts again if napi_complete_done() returned false. Tested with vhost-user of OVS 2.7 on host, which does not have the event idx feature. * Before patch: $ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 1472 60.00 32763206 0 6430.32 212992 60.00 23384299 4589.56 Interrupts on guest: 9872369 Packets/interrupt: 2.37 * After patch $ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 1472 60.00 32794646 0 6436.49 212992 60.00 32793501 6436.27 Interrupts on guest: 4941299 Packets/interrupt: 6.64 Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 5a18c243 ] Check return value from call to devm_kzalloc() in order to prevent a NULL pointer dereference. This issue was detected with the help of Coccinelle. Fixes: 4a5f8ae5 ("[media] davinci: vpif_capture: get subdevs from DT when available") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d5ac225c ] The cam->buffers[] array has cam->num_frames elements so the > needs to be changed to >= to avoid going beyond the end of the array. The ->buffers[] array is allocated in cpia2_allocate_buffers() if you want to confirm. Fixes: ab33d507 ("V4L/DVB (3376): Add cpia2 camera support") Signed-off-by:
-
Heinz Mauelshagen authored
[ Upstream commit 61e06e2c ] The raid set size is being revalidated unconditionally before a reshaping conversion is started. MD requires the size to only be reduced in case of a stripe removing (i.e. shrinking) reshape but not when growing because the raid array has to stay small until after the growing reshape finishes. Fix by avoiding the size revalidation in preresume unless a shrinking reshape is requested. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit a17d2d6c ] When used as part of a display pipeline, the VSP is stopped and restarted explicitly by the DU from its suspend and resume handlers. There is thus no need to stop or restart pipelines in the VSP suspend and resume handlers, and doing so would cause the hardware to be left in a misconfigured state. Ensure that the VSP suspend and resume handlers do not affect DRM-based pipelines. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit 4b3aec2b ] Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500. Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220, D240 and D280. Add STK BladeCtlr family, arrays: B210, B220, B240 and B280. These changes were done in multipath-tools time ago. Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit b369a047 ] Commit 56f3d383 ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare@suse.de> Cc: Takahiro Yasui <takahiro.yasui@hds.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit a44c9d36 ] Since scsi_get_device_flags_keyed() callers do not check whether or not the returned value is an error code, change that function such that it returns a flags value even if the 'key' argument is invalid. Note: since commit 28a0bc41 ("scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so checking whether bit 31 is set in the return value is not sufficient to tell the difference between an error code and a flags value. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Michael Chan authored
[ Upstream commit a8168b6c ] On some dual port NICs, the 2 ports have to be configured with compatible link speeds. Under some conditions, a port's configured speed may no longer be supported. The firmware will send a message to the driver when this happens. Improve this logic that prints out the warning by only printing it if we can determine the link speed that is no longer supported. If the speed is unknown or it is in autoneg mode, skip the warning message. Reported-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Tested-by:
-
Tobias Jordan authored
[ Upstream commit 2d9bbd02 ] sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to disable/unprepare them if we're not suspended. Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure that sun6i_spi_runtime_suspend() is called if needed. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3558fe90 (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
