- 21 Mar, 2013 10 commits
-
-
Mauro Carvalho Chehab authored
As there are some changes that seem to be firmware-dependent, we need to store the firmware version, as we don't want to break support for existing cards that use a legacy (and sometimes custom) firmware. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Instead of using hardcoded descriptors, detect them from the USB descriptors. This patch is rebased form Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7883/Signed-off-by:
-
Mauro Carvalho Chehab authored
Those attributes will be used by the newer sms2xxx cards. Signed-off-by: -
Mauro Carvalho Chehab authored
Board #0 is an existing one. Instead of initializing the driver with it, use a different value to detect if board is unknown. Signed-off-by: -
Mauro Carvalho Chehab authored
Add the remaining new defines/enums from Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7882/Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of printing a message for some random messages, print it for all sent/received ones. That helps a lot to debug what's going on. Signed-off-by: -
Mauro Carvalho Chehab authored
Convert from #define into an enum and add the newer message macros as found on this patch from Doron Cohen: http://patchwork.linuxtv.org/patch/7882/ No messages got supressed. Signed-off-by:
-
Mauro Carvalho Chehab authored
The same GPIO config struct was declared twice at the driver, with different names and different macros: struct smscore_config_gpio struct smscore_config_gpio Remove the one that uses CamelCase and fix the references to its attributes/macros. No functional changes. Signed-off-by: -
Mauro Carvalho Chehab authored
Those new definitions came from this patch, from Doron Cohen: http://patchwork.linuxtv.org/patch/7882/Signed-off-by:
-
Mauro Carvalho Chehab authored
Siano changed the namespace on more recent API, and re-used some of the old names. In order to be able to update the API to support newer chips, the better is to follow this change. Signed-off-by:
-
- 19 Mar, 2013 24 commits
-
-
Lad, Prabhakar authored
add a null entry in platform_device_id {}. This patch fixes following error: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is 24 bytes. The last of 3 is: 0x64 0x6d 0x33 0x35 0x35 0x2c 0x76 0x70 0x62 0x65 0x2d 0x76 0x65 0x6e 0x63 0x00 0x00 0x00 0x00 0x00 0x03 0x00 0x00 0x00 FATAL: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is not terminated with a NULL entry! make[1]: *** [__modpost] Error 1 Reported-by:Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by:
-
Hans Verkuil authored
The use of V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is obsolete, use DV_TIMINGS instead. Note that V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is just a #define for V4L2_IN/OUT_CAP_DV_TIMINGS. At some point in the future these CUSTOM_TIMINGS defines might be removed. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/davinci/dm644x_ccdc.c: In function ‘validate_ccdc_param’: drivers/media/platform/davinci/dm644x_ccdc.c:233:32: warning: comparison between ‘enum ccdc_gama_width’ and ‘enum ccdc_data_size’ [-Wenum-compare] It took a bit of work, see this thread of an earlier attempt to fix this: https://patchwork.kernel.org/patch/1923091/ I've chosen not to follow the suggestions in that thread since gamma_width is really a different property from data_size. What you really want is to know if gamma_width fits inside data_size and for that you need to translate each enum into a maximum bit number so you can safely compare the two. So I put in two static inline translation functions instead, keeping the rest of the code the same (except for fixing the 'gama' typo). Signed-off-by:
-
Hans Verkuil authored
Since vpfe_capture already provided a g_std op setting current_norm does not actually do anything. Remove it. Signed-off-by:
-
Hans Verkuil authored
Since vpbe_display already provides a g_std op setting current_norm didn't do anything. Remove that code. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The use of V4L2_OUT_CAP_CUSTOM_TIMINGS is deprecated, use DV_TIMINGS instead. Note that V4L2_OUT_CAP_CUSTOM_TIMINGS is just a #define for V4L2_OUT_CAP_DV_TIMINGS. At some point in the future these CUSTOM_TIMINGS defines might be removed. Signed-off-by:
-
Hans Verkuil authored
Remove VPBE_ENC_DV_PRESET (the DV_PRESET API is no longer supported) and VPBE_ENC_CUSTOM_TIMINGS is renamed to VPBE_ENC_DV_TIMINGS since the old "CUSTOM_TIMINGS" name is deprecated in favor of "DV_TIMINGS". Signed-off-by:
-
Hans Verkuil authored
This removes some incorrect dv_preset references left over from copy-and-paste errors. Signed-off-by:
-
Hans Verkuil authored
Finally remove the dv_preset support from this driver. Note that dv_preset support was already removed from any bridge drivers that use this i2c driver, so the dv_preset ops were no longer called and can be removed safely. Signed-off-by:
-
Hans Verkuil authored
In the functions tvp7002_mbus_fmt(), tvp7002_log_status and tvp7002_probe() we should use the dv_timings data structures instead of dv_preset data structures and functions. This is the second step towards removing the deprecated preset support of this driver. Signed-off-by:
-
Hans Verkuil authored
This is the first step towards removing the deprecated preset support of this driver. Signed-off-by:
-
Andrey Pavlenko authored
Added support for the GOTVIEW SatelliteHD card which is based on Montage M88DS3000 and works very well with this driver. Signed-off-by:
Andrey Pavlenko <andrey.a.pavlenko@gmail.com> Signed-off-by:
-
David Härdeman authored
The name is already misleading and will be more so in the future as the connection to the input subsystem is obscured away further. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
rc-core is a subsystem so it should be registered earlier if built into the kernel. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There's one missing USB ID at the card list. Add it. Signed-off-by: -
John Smith authored
This patch avoids incrementing continuity counter demux->cnt_storage[pid] for TS packets without payload in accordance with ISO /IEC 13818-1. [mchehab@redhat.com: unmangle whitespacing and fix CodingStyle. Also checked ISO/IEC spec: patch is according with it] Reviewed-by:
John Smith <johns90812@gmail.com> Signed-off-by:
-
Sean Young authored
Spotted by sparse. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
In stead of doing a memcpy from #defined offset, declare structs which describe the incoming and outgoing data accurately. Tested on first generation RedRat. Signed-off-by:
-
Sean Young authored
The redrat hardware cannot handle periods of larger than 32767us, limit appropriately. Also fix memory leak in redrat3_get_timeout. Signed-off-by:
-
Mauro Carvalho Chehab authored
This is an hybrid board. However, for analog, it requires a new driver for saa7136. So, for now, let's just add support for Digital TV. Signed-off-by: -
John Sheu authored
When a v4l2-mem2mem context gets a STREAMOFF call on either its CAPTURE or OUTPUT queues, we should: * Drop the corresponding rdy_queue, since a subsequent STREAMON expects an empty queue. * Deschedule the context, as it now has at least one empty queue and cannot run. Signed-off-by:
John Sheu <sheu@google.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
- 18 Mar, 2013 6 commits
-
-
John Sheu authored
In v4l2_m2m_try_schedule(), use the CAPTURE queue lock when accessing the CAPTURE queue, instead of relying on just holding the OUTPUT queue lock. Signed-off-by:
-
Sakari Ailus authored
Use the same handlers where the structs are the same. Implement a new handler for link enumeration since struct media_links_enum is different on 32-bit and 64-bit systems. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Sakari Ailus authored
Provide an ioctl handler for 32-bit binaries on 64-bit systems. Signed-off-by:
-
Peter Senna Tschudin authored
I'm pasting the original code and my proposal on the commit message for make it easy to compare the two versions. Line 62 of cx25821-audio-upstream.h contains: char *_defaultAudioName = "/root/audioGOOD.wav"; Original code after replace kmemdup for kstrdup, and after fix return error code: if (dev->input_audiofilename) { dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } /* Default if filename is empty string */ if (strcmp(dev->input_audiofilename, "") == 0) dev->_audiofilename = "/root/audioGOOD.wav"; } else { dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } } Code proposed in this patch: if ((dev->input_audiofilename) && (strcmp(dev->input_audiofilename, "") != 0)) dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); else dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } Signed-off-by:Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The current logic was broken and too complex; while it works fine for DVB-S2/DVB-S, it is broken for ISDB-T. Make the logic simpler, fixes it for ISDB-T and make it clearer. Signed-off-by: -
Mauro Carvalho Chehab authored
This function is complex, and has different workflows, one for DVBv3 calls, and another one for DVBv5 calls. Break it into 3 functions, in order to make easier to understand what each block does. No functional changes so far. A few comments got improved. Signed-off-by:
-
