Commit cfc1d277 ("module: Move all into module/") changed the prefix
of the module param by moving/renaming files.  A later commit also moves
the module_param() into a different file, thereby changing the prefix
yet again.

This would break kernel cmdline compatibility and also userspace
compatibility at /sys/module/module/parameters/sig_enforce.

So, set the prefix back to "module.".

Fixes: cfc1d277 ("module: Move all into module/")
Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pci fixes from Bjorn Helgaas:

 - Revert brcmstb patches that broke booting on Raspberry Pi Compute
   Module 4 (Bjorn Helgaas)

 - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte
   X299 entry instead of adding a new one (Bjorn Helgaas)

 - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo
   Pieralisi)

* tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Lorenzo Pieralisi's email address
  PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
  Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"
  Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
  Revert "PCI: brcmstb: Add control of subdevice voltage regulators"
  Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"

Pull ceph updates from Ilya Dryomov:
 "A big pile of assorted fixes and improvements for the filesystem with
  nothing in particular standing out, except perhaps that the fact that
  the MDS never really maintained atime was made official and thus it's
  no longer updated on the client either.

  We also have a MAINTAINERS update: Jeff is transitioning his
  filesystem maintainership duties to Xiubo"

* tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits)
  MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer"
  ceph: fix decoding of client session messages flags
  ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE
  ceph: remove redundant variable ino
  ceph: try to queue a writeback if revoking fails
  ceph: fix statfs for subdir mounts
  ceph: fix possible deadlock when holding Fwb to get inline_data
  ceph: redirty the page for writepage on failure
  ceph: try to choose the auth MDS if possible for getattr
  ceph: disable updating the atime since cephfs won't maintain it
  ceph: flush the mdlog for filesystem sync
  ceph: rename unsafe_request_wait()
  libceph: use swap() macro instead of taking tmp variable
  ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check
  ceph: no need to invalidate the fscache twice
  ceph: replace usage of found with dedicated list iterator variable
  ceph: use dedicated list iterator variable
  ceph: update the dlease for the hashed dentry when removing
  ceph: stop retrying the request when exceeding 256 times
  ceph: stop forwarding the request when exceeding 256 times
  ...

Merge tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching cleanup from Petr Mladek:

 - Remove duplicated livepatch code [Christophe]

* tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Remove klp_arch_set_pc() and asm/livepatch.h

Pull printk fixup from Petr Mladek:

 - Revert inappropriate use of wake_up_interruptible_all() in printk()

* tag 'printk-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  Revert "printk: wake up all waiters"

Pull memblock test suite updates from Mike Rapoport:
 "Comment updates for memblock test suite

  Update comments in the memblock tests so that they will have
  consistent style"

* tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: remove completed TODO item
  memblock tests: update style of comments for memblock_free_*() functions
  memblock tests: update style of comments for memblock_remove_*() functions
  memblock tests: update style of comments for memblock_reserve_*() functions
  memblock tests: update style of comments for memblock_add_*() functions

The "data->block[0]" variable comes from the user and is a number
between 0-255.  It needs to be capped to prevent writing beyond the end
of dma_buffer[].

Fixes: 5e9a97b1 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL")
Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A rare BUG_ON triggered in assoc_array_gc:

    [3430308.818153] kernel BUG at lib/assoc_array.c:1609!

Which corresponded to the statement currently at line 1593 upstream:

    BUG_ON(assoc_array_ptr_is_meta(p));

Using the data from the core dump, I was able to generate a userspace
reproducer[1] and determine the cause of the bug.

[1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc

After running the iterator on the entire branch, an internal tree node
looked like the following:

    NODE (nr_leaves_on_branch: 3)
      SLOT [0] NODE (2 leaves)
      SLOT [1] NODE (1 leaf)
      SLOT [2..f] NODE (empty)

In the userspace reproducer, the pr_devel output when compressing this
node was:

    -- compress node 0x5607cc089380 --
    free=0, leaves=0
    [0] retain node 2/1 [nx 0]
    [1] fold node 1/1 [nx 0]
    [2] fold node 0/1 [nx 2]
    [3] fold node 0/2 [nx 2]
    [4] fold node 0/3 [nx 2]
    [5] fold node 0/4 [nx 2]
    [6] fold node 0/5 [nx 2]
    [7] fold node 0/6 [nx 2]
    [8] fold node 0/7 [nx 2]
    [9] fold node 0/8 [nx 2]
    [10] fold node 0/9 [nx 2]
    [11] fold node 0/10 [nx 2]
    [12] fold node 0/11 [nx 2]
    [13] fold node 0/12 [nx 2]
    [14] fold node 0/13 [nx 2]
    [15] fold node 0/14 [nx 2]
    after: 3

At slot 0, an internal node with 2 leaves could not be folded into the
node, because there was only one available slot (slot 0). Thus, the
internal node was retained. At slot 1, the node had one leaf, and was
able to be folded in successfully. The remaining nodes had no leaves,
and so were removed. By the end of the compression stage, there were 14
free slots, and only 3 leaf nodes. The tree was ascended and then its
parent node was compressed. When this node was seen, it could not be
folded, due to the internal node it contained.

The invariant for compression in this function is: whenever
nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all
leaf nodes. The compression step currently cannot guarantee this, given
the corner case shown above.

To fix this issue, retry compression whenever we have retained a node,
and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second
compression will then allow the node in slot 1 to be folded in,
satisfying the invariant. Below is the output of the reproducer once the
fix is applied:

    -- compress node 0x560e9c562380 --
    free=0, leaves=0
    [0] retain node 2/1 [nx 0]
    [1] fold node 1/1 [nx 0]
    [2] fold node 0/1 [nx 2]
    [3] fold node 0/2 [nx 2]
    [4] fold node 0/3 [nx 2]
    [5] fold node 0/4 [nx 2]
    [6] fold node 0/5 [nx 2]
    [7] fold node 0/6 [nx 2]
    [8] fold node 0/7 [nx 2]
    [9] fold node 0/8 [nx 2]
    [10] fold node 0/9 [nx 2]
    [11] fold node 0/10 [nx 2]
    [12] fold node 0/11 [nx 2]
    [13] fold node 0/12 [nx 2]
    [14] fold node 0/13 [nx 2]
    [15] fold node 0/14 [nx 2]
    internal nodes remain despite enough space, retrying
    -- compress node 0x560e9c562380 --
    free=14, leaves=1
    [0] fold node 2/15 [nx 0]
    after: 3

Changes
=======
DH:
 - Use false instead of 0.
 - Reorder the inserted lines in a couple of places to put retained before
   next_slot.

ver #2)
 - Fix typo in pr_devel, correct comparison to "<="

Fixes: 3cb98950 ("Add a generic associative array implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/20220511225517.407935-1-stephen.s.brennan@oracle.com/ # v1
Link: https://lore.kernel.org/r/20220512215045.489140-1-stephen.s.brennan@oracle.com/ # v2
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more xfs updates from Dave Chinner:
 "This update is largely bug fixes and cleanups for all the code merged
  in the first pull request. The majority of them are to the new logged
  attribute code, but there are also a couple of fixes for other log
  recovery and memory leaks that have recently been found.

  Summary:

   - fix refcount leak in xfs_ifree()

   - fix xfs_buf_cancel structure leaks in log recovery

   - fix dquot leak after failed quota check

   - fix a couple of problematic ASSERTS

   - fix small aim7 perf regression in from new btree sibling validation

   - clean up log incompat feature marking for new logged attribute
     feature

   - disallow logged attributes on legacy V4 filesystem formats.

   - fix da state leak when freeing attr intents

   - improve validation of the attr log items in recovery

   - use slab caches for commonly used attr structures

   - fix leaks of attr name/value buffer and reduce copying overhead
     during intent logging

   - remove some dead debug code from log recovery"

* tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
  xfs: fix xfs_ifree() error handling to not leak perag ref
  xfs: move xfs_attr_use_log_assist usage out of libxfs
  xfs: move xfs_attr_use_log_assist out of xfs_log.c
  xfs: warn about LARP once per mount
  xfs: implement per-mount warnings for scrub and shrink usage
  xfs: don't log every time we clear the log incompat flags
  xfs: convert buf_cancel_table allocation to kmalloc_array
  xfs: don't leak xfs_buf_cancel structures when recovery fails
  xfs: refactor buffer cancellation table allocation
  xfs: don't leak btree cursor when insrec fails after a split
  xfs: purge dquots after inode walk fails during quotacheck
  xfs: assert in xfs_btree_del_cursor should take into account error
  xfs: don't assert fail on perag references on teardown
  xfs: avoid unnecessary runtime sibling pointer endian conversions
  xfs: share xattr name and value buffers when logging xattr updates
  xfs: do not use logged xattr updates on V4 filesystems
  xfs: Remove duplicate include
  xfs: reduce IOCB_NOWAIT judgment for retry exclusive unaligned DIO
  xfs: Remove dead code
  xfs: fix typo in comment
  ...

Pull RTC updates from Alexandre Belloni:
 "A new driver represents the bulk of the changes and then we get the
  usual small fixes.

  New driver:

   - Renesas RZN1 rtc

  Drivers:

   - sun6i: Add nvmem support"

* tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: mxc: Silence a clang warning
  rtc: rzn1: Fix a variable type
  rtc: rzn1: Fix error code in probe
  rtc: rzn1: Avoid mixing variables
  rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
  rtc: mt6397: check return value after calling platform_get_resource()
  rtc: rzn1: fix platform_no_drv_owner.cocci warning
  rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
  rtc: meson: Fix email address in MODULE_AUTHOR
  rtc: simplify the return expression of rx8025_set_offset()
  rtc: pcf85063: Add a compatible entry for pca85073a
  dt-binding: pcf85063: Add an entry for pca85073a
  MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver
  rtc: rzn1: Add oscillator offset support
  rtc: rzn1: Add alarm support
  rtc: rzn1: Add new RTC driver
  dt-bindings: rtc: rzn1: Describe the RZN1 RTC
  rtc: sun6i: Add NVMEM provider

Pull i3c updates from Alexandre Belloni:
 "Only clean ups and no functional change this cycle. A couple of yaml
  conversions of the DT bindings, and a couple of code cleanups"

* tag 'i3c/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  MAINTAINERS: rectify entries for some i3c drivers after dt conversion
  i3c: master: svc: fix returnvar.cocci warning
  i3c/master: simplify the return expression of i3c_hci_remove()
  dt-bindings: i3c: Convert snps,dw-i3c-master to DT schema
  dt-bindings: i3c: Convert cdns,i3c-master to DT schema

Merge tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM core's dm_table_supports_poll to return false if target has no
   data devices.

 - Fix DM verity target so that it cannot be switched to a different DM
   target type (e.g. dm-linear) via DM table reload.

* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: set DM_TARGET_IMMUTABLE feature flag
  dm table: fix dm_table_supports_poll to return false if no data devices

Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:

drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ba7aa630 ("rtc: mxc: use of_device_get_match_data")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com

Pull power supply and reset updates from Sebastian Reichel:
 "Not much from the power-supply subsystem this time around, since I was
  busy most of the cycle. This also contains some fixes that I
  originally planned to send for 5.18. Apart from this there is nothing
  noteworthy.

  Power-supply core:

   - init power_supply_info struct to zero

  Drivers:

   - bq27xxx: expose data for uncalibrated battery

   - bq24190-charger: use pm_runtime_resume_and_get

   - ab8500_fg: allocate wq in probe

   - axp288_fuel_gauge: drop BIOS version from 'T3 MRD' quirk

   - axp288_fuel_gauge: modify 'T3 MRD' quirk to also fix 'One Mix 1'"

* tag 'for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  power: supply: bq27xxx: expose battery data when CI=1
  power: supply: ab8500_fg: Allocate wq in probe
  power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
  power: supply: axp288_fuel_gauge: Fix battery reporting on the One Mix 1
  power: supply: core: Initialize struct to zero

Pull watchdog updates from Wim Van Sebroeck:

 - Add MediaTek MT8186 support

 - Add Mediatek MT7986 reset-controller support

 - Add i.MX93 support

 - Add watchdog driver for Sunplus SP7021

 - Add SC8180X and SC8280XP compatibles

 - Add Renesas RZ/N1 Watchdog driver and support for RZ/N1

 - rzg2l_wdt improvements and fixes

 - Several other improvements and fixes

* tag 'linux-watchdog-5.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
  watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
  dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  watchdog: Add Renesas RZ/N1 Watchdog driver
  dt-bindings: watchdog: renesas,wdt: Add support for RZ/N1
  watchdog: wdat_wdt: Stop watchdog when uninstalling module
  watchdog: wdat_wdt: Stop watchdog when rebooting the system
  watchdog: wdat_wdt: Using the existing function to check parameter timeout
  dt-bindings: watchdog: da9062: add watchdog timeout mode
  dt-bindings: watchdog: renesas,wdt: Document RZ/G2UL SoC
  watchdog: iTCO_wdt: Using existing macro define covers more scenarios
  watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
  dt-bindings: watchdog: Add SC8180X and SC8280XP compatibles
  watchdog: rti_wdt: Fix calculation and evaluation of preset heartbeat
  dt-bindings: watchdog: uniphier: Use unevaluatedProperties
  watchdog: sp805: disable watchdog on remove
  watchdog: da9063: optionally disable watchdog during suspend
  dt-bindings: mfd: da9063: watchdog: add suspend disable option
  dt-bindings: watchdog: sunxi: clarify clock support
  dt-bindings: watchdog: sunxi: fix F1C100s compatible
  watchdog: Add watchdog driver for Sunplus SP7021
  ...

Pull vfio updates from Alex Williamson:

 - Improvements to mlx5 vfio-pci variant driver, including support for
   parallel migration per PF (Yishai Hadas)

 - Remove redundant iommu_present() check (Robin Murphy)

 - Ongoing refactoring to consolidate the VFIO driver facing API to use
   vfio_device (Jason Gunthorpe)

 - Use drvdata to store vfio_device among all vfio-pci and variant
   drivers (Jason Gunthorpe)

 - Remove redundant code now that IOMMU core manages group DMA ownership
   (Jason Gunthorpe)

 - Remove vfio_group from external API handling struct file ownership
   (Jason Gunthorpe)

 - Correct typo in uapi comments (Thomas Huth)

 - Fix coccicheck detected deadlock (Wan Jiabing)

 - Use rwsem to remove races and simplify code around container and kvm
   association to groups (Jason Gunthorpe)

 - Harden access to devices in low power states and use runtime PM to
   enable d3cold support for unused devices (Abhishek Sahu)

 - Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)

 - Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)

 - Pass KVM pointer directly rather than via notifier (Matthew Rosato)

* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
  vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
  vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
  vfio: Do not manipulate iommu dma_owner for fake iommu groups
  vfio/pci: Move the unused device into low power state with runtime PM
  vfio/pci: Virtualize PME related registers bits and initialize to zero
  vfio/pci: Change the PF power state to D0 before enabling VFs
  vfio/pci: Invalidate mmaps and block the access in D3hot power state
  vfio: Change struct vfio_group::container_users to a non-atomic int
  vfio: Simplify the life cycle of the group FD
  vfio: Fully lock struct vfio_group::container
  vfio: Split up vfio_group_get_device_fd()
  vfio: Change struct vfio_group::opened from an atomic to bool
  vfio: Add missing locking for struct vfio_group::kvm
  kvm/vfio: Fix potential deadlock problem in vfio
  include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
  vfio/pci: Use the struct file as the handle not the vfio_group
  kvm/vfio: Remove vfio_group from kvm
  vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
  vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
  vfio: Remove vfio_external_group_match_file()
  ...

Commit 4bd69ecf ("dt-bindings: i3c: Convert cdns,i3c-master to DT
schema") and commit 6742ca62 ("dt-bindings: i3c: Convert
snps,dw-i3c-master to DT schema") convert some i3c dt-bindings to yaml,
but miss to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.

Repair these file references in I3C DRIVER FOR CADENCE I3C MASTER IP and
I3C DRIVER FOR SYNOPSYS DESIGNWARE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220601074212.19984-1-lukas.bulwahn@gmail.com

Pull more erofs updates from Gao Xiang:
 "This is a follow-up to the main updates, including some fixes of
  fscache mode related to compressed inodes and a cachefiles tracepoint.
  There is also a patch to fix an unexpected decompression strategy
  change due to a cleanup in the past. All the fixes are quite small.

  Apart from these, documentation is also updated for a better
  description of recent new features.

  In addition, this has some trivial cleanups without actual code logic
  changes, so I could have a more recent codebase to work on folios and
  avoiding the PG_error page flag for the next cycle.

  Summary:

   - Leave compressed inodes unsupported in fscache mode for now

   - Avoid crash when using tracepoint cachefiles_prep_read

   - Fix `backmost' behavior due to a recent cleanup

   - Update documentation for better description of recent new features

   - Several decompression cleanups w/o logical change"

* tag 'erofs-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix 'backmost' member of z_erofs_decompress_frontend
  erofs: simplify z_erofs_pcluster_readmore()
  erofs: get rid of label `restart_now'
  erofs: get rid of `struct z_erofs_collection'
  erofs: update documentation
  erofs: fix crash when enable tracepoint cachefiles_prep_read
  erofs: leave compressed inodes unsupported in fscache mode for now

Pull ksmbd server updates from Steve French:

 - rdma (smbdirect) fixes, cleanup and optimizations

 - crediting (flow control) fix for mounts from Windows client

 - ACL fix

 - Windows client query dir fix

 - write validation fix

 - cleanups

* tag '5.19-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: smbd: relax the count of sges required
  ksmbd: fix outstanding credits related bugs
  ksmbd: smbd: fix connection dropped issue
  ksmbd: Fix some kernel-doc comments
  ksmbd: fix wrong smbd max read/write size check
  ksmbd: add smbd max io size parameter
  ksmbd: handle smb2 query dir request for OutputBufferLength that is too small
  ksmbd: smbd: handle multiple Buffer descriptors
  ksmbd: smbd: change the return value of get_sg_list
  ksmbd: smbd: simplify tracking pending packets
  ksmbd: smbd: introduce read/write credits for RDMA read/write
  ksmbd: smbd: change prototypes of RDMA read/write related functions
  ksmbd: validate length in smb2_write()
  ksmbd: fix reference count leak in smb_check_perm_dacl()

In AFS, a directory is handled as a file that the client downloads and
parses locally for the purposes of performing lookup and getdents
operations.  The in-kernel afs filesystem has a number of functions that
do this.

A directory file is arranged as a series of 2K blocks divided into
32-byte slots, where a directory entry occupies one or more slots, plus
each block starts with one or more metadata blocks.

When parsing a block, if the last slots are occupied by a dirent that
occupies more than a single slot and the file position points at a slot
that's not the initial one, the logic in afs_dir_iterate_block() that
skips over it won't advance the file pointer to the end of it.  This
will cause an infinite loop in getdents() as it will keep retrying that
block and failing to advance beyond the final entry.

Fix this by advancing the file pointer if the next entry will be beyond
it when we skip a block.

This was found by the generic/676 xfstest but can also be triggered with
something like:

	~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Quite a large number of conversions this time around, courtesy of Uwe
  who has been working tirelessly on these. No drivers of the legacy API
  are left at this point, so as a next step the old API can be removed.

  Support is added for a few new devices such as the Xilinx AXI timer-
  based PWMs and the PWM IP found on Sunplus SoCs.

  Other than that, there's a number of fixes, cleanups and optimizations"

* tag 'pwm/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (43 commits)
  pwm: pwm-cros-ec: Add channel type support
  dt-bindings: google,cros-ec-pwm: Add the new -type compatible
  dt-bindings: Add mfd/cros_ec definitions
  pwm: Document that the pinstate of a disabled PWM isn't reliable
  pwm: twl-led: Implement .apply() callback
  pwm: lpc18xx: Implement .apply() callback
  pwm: mediatek: Implement .apply() callback
  pwm: lpc32xx: Implement .apply() callback
  pwm: tegra: Implement .apply() callback
  pwm: stmpe: Implement .apply() callback
  pwm: sti: Implement .apply() callback
  pwm: pwm-mediatek: Add support for MediaTek Helio X10 MT6795
  dt-bindings: pwm: pwm-mediatek: Add documentation for MT6795 SoC
  pwm: tegra: Optimize period calculation
  pwm: renesas-tpu: Improve precision of period and duty_cycle calculation
  pwm: renesas-tpu: Improve maths to compute register settings
  pwm: renesas-tpu: Rename variables to match the usual naming
  pwm: renesas-tpu: Implement .apply() callback
  pwm: renesas-tpu: Make use of devm functions
  pwm: renesas-tpu: Make use of dev_err_probe()
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This corrects the check for irq_of_parse_and_map() failures in the
  Qualcomm SMD driver and fixes unregistration and a couple of double
  free in the virtio rpmsg driver"

* tag 'rpmsg-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
  rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
  rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
  rpmsg: virtio: Fix possible double free in rpmsg_probe()
  rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value

Pull remoteproc updates from Bjorn Andersson:
 "This fixes a race condition in the user space interface for starting
  and stopping remote processors, it makes the ELF loader properly skip
  zero memsz segments and it cleans up the debugfs tracefile code a bit
  by not checking for errors.

  It introduces support for controlling the audio DSP on Qualcomm
  MSM8226, as well as audio and compute DSPs on Qualcomm SC8280XP.

  It makes it possible to specify the firmware path for Mediatek's
  remote processors, fixes a double free in the SCP driver and addresses
  an issue with the SRAM initialization on MT8195.

  Lastly it deprecates the custom ELF loader in the iMX remoteproc
  driver, in favor of using the shared one"

* tag 'rproc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (21 commits)
  dt-bindings: remoteproc: mediatek: Add optional memory-region to mtk,scp
  dt-bindings: remoteproc: mediatek: Make l1tcm reg exclusive to mt819x
  dt-bindings: remoteproc: st,stm32-rproc: Fix phandle-array parameters description
  remoteproc: imx_rproc: Support i.MX93
  dt-bindings: remoteproc: imx_rproc: Support i.MX93
  remoteproc: qcom: pas: Add MSM8226 ADSP support
  dt-bindings: remoteproc: qcom: pas: Add MSM8226 adsp
  remoteproc: mediatek: Allow reading firmware-name from DT
  dt-bindings: remoteproc: mediatek: Add firmware-name property
  remoteproc: qcom: pas: Add sc8280xp remoteprocs
  dt-bindings: remoteproc: qcom: pas: Add sc8280xp adsp and nsp pair
  dt-bindings: remoteproc: mediatek: Add interrupts property to mtk,scp
  remoteproc: imx_rproc: Ignore create mem entry for resource table
  remoteproc: core: Move state checking to remoteproc_core
  remoteproc: core: Remove state checking before calling rproc_boot()
  remoteproc: imx_dsp_rproc: Make rsc_table optional
  remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments
  remoteproc: elf_loader: skip segment with memsz as zero
  remoteproc: mtk_scp: Fix a potential double free
  remoteproc: Don't bother checking the return value of debugfs_create*
  ...

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: a driver fix
  for spurious timeouts in the fsi driver and an improvement to make the
  core display error messages for transfer_one_message() to help people
  debug things"

* tag 'spi-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: core: Display return code when failing to transfer message
  spi: fsi: Fix spurious timeout

Pull pcmcia updates from Dominik Brodowski:
 "A few odd cleanups and fixes, including a Kconfig fix to add a
  required dependency on MIPS"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Use platform_get_irq() to get the interrupt
  pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
  drivers/pcmcia: Fix typo in comment

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add support for 'dacl' and 'sacl' attributes

  Bugfixes and Cleanups:
   - Fixes for reporting mapping errors
   - Fixes for memory allocation errors
   - Improve warning message when locks are lost
   - Update documentation for the nfs4_unique_id parameter
   - Add an explanation of NFSv4 client identifiers
   - Ensure the i_size attribute is written to the fscache storage
   - Fix freeing uninitialized nfs4_labels
   - Better handling when xprtrdma bc_serv is NULL
   - Mark qualified async operations as MOVEABLE tasks"

* tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1 mark qualified async operations as MOVEABLE tasks
  xprtrdma: treat all calls not a bcall when bc_serv is NULL
  NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
  NFS: Pass i_size to fscache_unuse_cookie() when a file is released
  Documentation: Add an explanation of NFSv4 client identifiers
  NFS: update documentation for the nfs4_unique_id parameter
  NFS: Improve warning message when locks are lost.
  NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes
  NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes
  NFSv4: Specify the type of ACL to cache
  NFSv4: Don't hold the layoutget locks across multiple RPC calls
  pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors
  NFS: Further fixes to the writeback error handling
  NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
  NFS: Memory allocation failures are not server fatal errors
  NFS: Don't report errors from nfs_pageio_complete() more than once
  NFS: Do not report flush errors in nfs_write_end()
  NFS: Don't report ENOSPC write errors twice
  NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
  NFS: Do not report EINTR/ERESTARTSYS as mapping errors

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've refactored the existing atomic write support
  implemented by in-memory operations to have storing data in disk
  temporarily, which can give us a benefit to accept more atomic writes.

  At the same time, we removed the existing volatile write support.

  We've also revisited the file pinning and GC flows and found some
  corner cases which contributeed abnormal system behaviours.

  As usual, there're several minor code refactoring for readability,
  sanity check, and clean ups.

  Enhancements:

   - allow compression for mmap files in compress_mode=user

   - kill volatile write support

   - change the current atomic write way

   - give priority to select unpinned section for foreground GC

   - introduce data read/write showing path info

   - remove unnecessary f2fs_lock_op in f2fs_new_inode

  Bug fixes:

   - fix the file pinning flow during checkpoint=disable and GCs

   - fix foreground and background GCs to select the right victims and
     get free sections on time

   - fix GC flags on defragmenting pages

   - avoid an infinite loop to flush node pages

   - fix fallocate to use file_modified to update permissions
     consistently"

* tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
  f2fs: fix to tag gcing flag on page during file defragment
  f2fs: replace F2FS_I(inode) and sbi by the local variable
  f2fs: add f2fs_init_write_merge_io function
  f2fs: avoid unneeded error handling for revoke_entry_slab allocation
  f2fs: allow compression for mmap files in compress_mode=user
  f2fs: fix typo in comment
  f2fs: make f2fs_read_inline_data() more readable
  f2fs: fix to do sanity check for inline inode
  f2fs: fix fallocate to use file_modified to update permissions consistently
  f2fs: don't use casefolded comparison for "." and ".."
  f2fs: do not stop GC when requiring a free section
  f2fs: keep wait_ms if EAGAIN happens
  f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters
  f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION
  f2fs: kill volatile write support
  f2fs: change the current atomic write way
  f2fs: don't need inode lock for system hidden quota
  f2fs: stop allocating pinned sections if EAGAIN happens
  f2fs: skip GC if possible when checkpoint disabling
  f2fs: give priority to select unpinned section for foreground GC
  ...

Pull LED updates from Pavel Machek:
 "Most significant here is the driver for Qualcomm LPG. Apparently it
  drives backlight on some boards, so it is quite important for some
  people"

* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: qcom-lpg: Require pattern to follow documentation
  leds: lp50xx: Remove duplicated error reporting in .remove()
  leds: qcom-lpg: add missing PWM dependency
  leds: ktd2692: Make aux-gpios optional
  dt-bindings: leds: convert ktd2692 bindings to yaml
  leds: ktd2692: Avoid duplicate error messages on probe deferral
  leds: is31fl32xx: Improve error reporting in .remove()
  leds: Move pwm-multicolor driver into rgb directory
  leds: Add PWM multicolor driver
  dt-bindings: leds: Add multicolor PWM LED bindings
  dt-bindings: leds: Optional multi-led unit address
  leds: regulator: Make probeable from device tree
  leds: regulator: Add dev helper variable
  dt-bindings: leds: Add regulator-led binding
  leds: pca9532: Make pca9532_destroy_devices() return void
  leds: Add pm8350c support to Qualcomm LPG driver
  dt-bindings: leds: Add pm8350c pmic support
  leds: Add driver for Qualcomm LPG
  dt-bindings: leds: Add Qualcomm Light Pulse Generator binding

Pull i2c updates from Wolfram Sang:
 "Only driver updates for 5.19.

  Bigger changes are for Meson, NPCM, and R-Car, but there are also
  changes all over the place"

* tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c: meson: fix typo in comment
  i2c: rcar: use flags instead of atomic_xfer
  i2c: rcar: REP_AFTER_RD is not a persistent flag
  i2c: rcar: use BIT macro consistently
  i2c: qcom-geni: remove unnecessary conditions
  i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  i2c: rcar: refactor handling of first message
  i2c: rcar: avoid race condition with SMIs
  i2c: xiic: Correct the datatype for rx_watermark
  i2c: rcar: fix PM ref counts in probe error paths
  i2c: npcm: Handle spurious interrupts
  i2c: npcm: Correct register access width
  i2c: npcm: Add tx complete counter
  i2c: npcm: Fix timeout calculation
  i2c: npcm: Remove unused variable clk_regmap
  i2c: npcm: Change the way of getting GCR regmap
  i2c: xiic: Fix Tx Interrupt path for grouped messages
  i2c: xiic: Fix coding style issues
  i2c: xiic: return value of xiic_reinit
  i2c: cadence: Increase timeout per message if necessary
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...

Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.

Fixes: 85e39fee ("NFSv4.1 identify and mark RPC tasks that can move between transports")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When a rdma server returns a fault format reply, nfs v3 client may
treats it as a bcall when bc service is not exist.

The debug message at rpcrdma_bc_receive_call are,

[56579.837169] RPC:       rpcrdma_bc_receive_call: callback XID
00000001, length=20
[56579.837174] RPC:       rpcrdma_bc_receive_call: 00 00 00 01 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 04

After that, rpcrdma_bc_receive_call will meets NULL pointer as,

[  226.057890] BUG: unable to handle kernel NULL pointer dereference at
00000000000000c8
...
[  226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20
...
[  226.059732] Call Trace:
[  226.059878]  rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma]
[  226.060011]  __ib_process_cq+0x89/0x170 [ib_core]
[  226.060092]  ib_cq_poll_work+0x26/0x80 [ib_core]
[  226.060257]  process_one_work+0x1a7/0x360
[  226.060367]  ? create_worker+0x1a0/0x1a0
[  226.060440]  worker_thread+0x30/0x390
[  226.060500]  ? create_worker+0x1a0/0x1a0
[  226.060574]  kthread+0x116/0x130
[  226.060661]  ? kthread_flush_work_fn+0x10/0x10
[  226.060724]  ret_from_fork+0x35/0x40
...
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr.  We end up growing two more allocations, but this
fixes up a crash as:

PID: 790    TASK: ffff88811b43c000  CPU: 0   COMMAND: "ls"
 #0 [ffffc90000857920] panic at ffffffff81b9bfde
 #1 [ffffc900008579c0] do_trap at ffffffff81023a9b
 #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
 #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
 #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
 #7 [ffffc90000857c60] walk_component at ffffffff813a86c4
 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a007 ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.

Fixes: a4ffc152 ("dm: add verity target")
Cc: stable@vger.kernel.org
Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

I will soon lose my @arm.com email address, so to prevent any possible
issue let's update all kernel references (inclusive of .mailmap) to my
@kernel.org alias ahead of time.

My @arm.com address is still working and will likely resume to work at some
point in the future; nonetheless, it is safer to switch to the @kernel.org
alias from now onwards so that continuity is guaranteed.

Link: https://lore.kernel.org/r/20220528151411.29810-1-lorenzo.pieralisi@arm.comSigned-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>

92597f97 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry.  Add the appropriate braces.

Found by:

  $ make W=1 drivers/pci/pci.o
    CC      drivers/pci/pci.o
  drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
   2974 |   .ident = "Elo i2",
        |            ^~~~~~~~

Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes: 92597f97 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org  # v5.15+

This reverts commit 830aa6f2.

This is part of a revert of the following commits:

  11ed8b86 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
  93e41f3f ("PCI: brcmstb: Add control of subdevice voltage regulators")
  67211aad ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
  830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")

Cyril reported that 830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4.  Apparently 830aa6f2 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.

This does not seem to affect the Raspberry Pi 4 B.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.orgReported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit 67211aad.

This is part of a revert of the following commits:

  11ed8b86 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
  93e41f3f ("PCI: brcmstb: Add control of subdevice voltage regulators")
  67211aad ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
  830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")

Cyril reported that 830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4.  Apparently 830aa6f2 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.

This does not seem to affect the Raspberry Pi 4 B.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.orgReported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit 93e41f3f.

This is part of a revert of the following commits:

  11ed8b86 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
  93e41f3f ("PCI: brcmstb: Add control of subdevice voltage regulators")
  67211aad ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
  830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")

Cyril reported that 830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4.  Apparently 830aa6f2 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.

This does not seem to affect the Raspberry Pi 4 B.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-3-helgaas@kernel.orgReported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit 11ed8b86.

This is part of a revert of the following commits:

  11ed8b86 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
  93e41f3f ("PCI: brcmstb: Add control of subdevice voltage regulators")
  67211aad ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
  830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")

Cyril reported that 830aa6f2 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4.  Apparently 830aa6f2 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.

This does not seem to affect the Raspberry Pi 4 B.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-2-helgaas@kernel.orgReported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>