1. 12 Jun, 2013 15 commits
  2. 11 Jun, 2013 15 commits
    • Eric Dumazet's avatar
      net_sched: add 64bit rate estimators · 45203a3b
      Eric Dumazet authored
      struct gnet_stats_rate_est contains u32 fields, so the bytes per second
      field can wrap at 34360Mbit.
      
      Add a new gnet_stats_rate_est64 structure to get 64bit bps/pps fields,
      and switch the kernel to use this structure natively.
      
      This structure is dumped to user space as a new attribute :
      
      TCA_STATS_RATE_EST64
      
      Old tc command will now display the capped bps (to 34360Mbit), instead
      of wrapped values, and updated tc command will display correct
      information.
      
      Old tc command output, after patch :
      
      eric:~# tc -s -d qd sh dev lo
      qdisc pfifo 8001: root refcnt 2 limit 1000p
       Sent 80868245400 bytes 1978837 pkt (dropped 0, overlimits 0 requeues 0)
       rate 34360Mbit 189696pps backlog 0b 0p requeues 0
      
      This patch carefully reorganizes "struct Qdisc" layout to get optimal
      performance on SMP.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Ben Hutchings <bhutchings@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45203a3b
    • Peter Pan(潘卫平)'s avatar
      net: pass correct parameter to skb_headers_offset_update() · b41abb42
      Peter Pan(潘卫平) authored
      Since commit 1a37e412(net: Use 16bits for *_headers fields of struct
      skbuff), skb->*_header are relative to skb->head,
      so copy_skb_header() should not call skb_headers_offset_update() now,
      and we should pass correct parameter to skb_headers_offset_update() in
      pskb_expand_head() and skb_copy_expand().
      Signed-off-by: default avatarWeiping Pan <panweiping3@gmail.com>
      Reviewed-by: default avatarSimon Horman <horms@verge.net.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b41abb42
    • Gao feng's avatar
      netlink: Add compare function for netlink_table · da12c90e
      Gao feng authored
      As we know, netlink sockets are private resource of
      net namespace, they can communicate with each other
      only when they in the same net namespace. this works
      well until we try to add namespace support for other
      subsystems which use netlink.
      
      Don't like ipv4 and route table.., it is not suited to
      make these subsytems belong to net namespace, Such as
      audit and crypto subsystems,they are more suitable to
      user namespace.
      
      So we must have the ability to make the netlink sockets
      in same user namespace can communicate with each other.
      
      This patch adds a new function pointer "compare" for
      netlink_table, we can decide if the netlink sockets can
      communicate with each other through this netlink_table
      self-defined compare function.
      
      The behavior isn't changed if we don't provide the compare
      function for netlink_table.
      Signed-off-by: default avatarGao feng <gaofeng@cn.fujitsu.com>
      Acked-by: default avatarSerge E. Hallyn <serge.hallyn@ubuntu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      da12c90e
    • Li RongQing's avatar
      xen-netfront: use skb_partial_csum_set() to simplify the codes · 8249152c
      Li RongQing authored
      use skb_partial_csum_set() to simplify the codes
      
      Cc: Jason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarLi RongQing <roy.qing.li@gmail.com>
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8249152c
    • David S. Miller's avatar
      Merge branch 'bridge_flags' · 2e422069
      David S. Miller authored
      Vlad Yasevich says:
      
      ====================
      The following series adds 2 new flags to bridge.  One flag allows
      the user to control whether mac learning is performed on the interface
      or not.  By default mac learning is on.
      The other flag allows the user to control whether unicast traffic
      is flooded (send without an fdb) to a given unicast port.  Default is
      on.
      
      Changes since v4:
       - Implemented Stephen's suggestions.
      
      Changes since v2:
       - removed unused "unlock" tag.
      
      Changes since v1:
       - Integrated suggestion from MST to not impact RTM_NEWNEIGH and to
         skip lookups when learning is disabled.
      
      Vlad Yasevich (2):
        bridge: Add flag to control mac learning.
        bridge: Add a flag to control unicast packet flood.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2e422069
    • Vlad Yasevich's avatar
      bridge: Add a flag to control unicast packet flood. · 867a5943
      Vlad Yasevich authored
      Add a flag to control flood of unicast traffic.  By default, flood is
      on and the bridge will flood unicast traffic if it doesn't know
      the destination.  When the flag is turned off, unicast traffic
      without an FDB will not be forwarded to the specified port.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Reviewed-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      867a5943
    • Vlad Yasevich's avatar
      bridge: Add flag to control mac learning. · 9ba18891
      Vlad Yasevich authored
      Allow user to control whether mac learning is enabled on the port.
      By default, mac learning is enabled.  Disabling mac learning will
      cause new dynamic FDB entries to not be created for a particular port.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ba18891
    • Cong Wang's avatar
      net: remove last caller of skb_tail_offset() and itself · 30f3a40f
      Cong Wang authored
      Similar to the following commits:
      
      commit 00f97da1 (netpoll: fix position of network header)
      commit 525cebed (pktgen: Fix position of ip and udp header)
      
      using skb_tail_offset() seems not correct since the offset
      is based on head pointer.
      
      With the last caller removed, skb_tail_offset() can be killed
      finally.
      
      Cc: Thomas Graf <tgraf@suug.ch>
      Cc: Daniel Borkmann <dborkmann@redhat.com>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarCong Wang <amwang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30f3a40f
    • David S. Miller's avatar
      Merge branch 'll_poll' · 0a4db187
      David S. Miller authored
      Eliezer Tamir says:
      
      ====================
      This patch set adds the ability for the socket layer code to
      poll directly on an Ethernet device's RX queue.
      This eliminates the cost of the interrupt and context switch
      and with proper tuning allows us to get very close to the HW latency.
      
      This is a follow up to Jesse Brandeburg's Kernel Plumbers talk from
      last year
      http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/09/2012-lpc-Low-Latency-Sockets-slides-brandeburg.pdf
      
      Patch 1 adds a napi_id and a hashing mechanism to lookup a napi by id.
      Patch 2 adds an ndo_ll_poll method and the code that supports it.
      Patch 3 adds support for busy-polling on UDP sockets.
      Patch 4 adds support for TCP.
      Patch 5 adds the ixgbe driver code implementing ndo_ll_poll.
      Patch 6 adds additional statistics to the ixgbe driver for ndo_ll_poll.
      
      Performance numbers:
           setup                         TCP_RR           UDP_RR
      kernel  Config     C3/6 rx-usecs tps cpu% S.dem  tps cpu% S.dem
      patched optimized  on   100      87k 3.13 11.4   94K 3.17 10.7
      patched optimized  on   0        71k 3.12 14.0   84k 3.19 12.0
      patched optimized  on   adaptive 80k 3.13 12.5   90k 3.46 12.2
      patched typical    on   100      72  3.13 14.0   79k 3.17 12.8
      patched typical    on   0        60k 2.13 16.5   71k 3.18 14.0
      patched typical    on   adaptive 67k 3.51 16.7   75k 3.36 14.5
      3.9     optimized  on   adaptive 25k 1.0  12.7   28k 0.98 11.2
      3.9     typical    off  0        48k 1.09  7.3   52k 1.11 4.18
      3.9     typical    0ff  adaptive 35k 1.12 4.08   38k 0.65 5.49
      3.9     optimized  off  adaptive 40k 0.82 4.83   43k 0.70 5.23
      3.9     optimized  off  0        57k 1.17 4.08   62k 1.04 3.95
      
      Test setup details:
      Machines: each with two Intel Xeon 2680 CPUs and X520 (82599) optical
      NICs
      Tests: Netperf tcp_rr and udp_rr, 1 byte (round trips per second)
      Kernel: unmodified 3.9 and patched 3.9
      Config: typical is derived from RH6.2, optimized is a stripped down
      config.
      Interrupt coalescing (ethtool rx-usecs) settings: 0=off, 1=adaptive,
      100 us
      When C3/6 states were turned on (via BIOS) the performance governor
      was used.
      
      These performance numbers were measured with v2 of the patch set.
      Performance of the optimized config with an rx-usecs setting of 100
      (the first line in the table above) was tracked during the evolution
      of the patches and has never varied by more than 1%.
      
      Design:
      A global hash table that allows us to look up a struct napi by a
      unique id was added.
      
      A napi_id field was added both to struct sk_buff and struct sk.
      This is used to track which NAPI we need to poll for a specific
      socket.
      
      The device driver marks every incoming skb with this id.
      This is propagated to the sk when the socket is looked up in the
      protocol handler.
      
      When the socket code does not find any more data on the socket queue,
      it now may call ndo_ll_poll which will crank the device's rx queue and
      feed incoming packets to the stack directly from the context of the
      socket.
      
      A sysctl value (net.core4.low_latency_poll) controls how many
      microseconds we busy-wait before giving up. (setting to 0 globally
      disables busy-polling)
      
      Locking:
      
      1. Locking between napi poll and ndo_ll_poll:
      Since what needs to be locked between a device's NAPI poll and
      ndo_ll_poll, is highly device / configuration dependent, we do this
      inside the Ethernet driver.
      For example, when packets for high priority connections are sent to
      separate rx queues, you might not need locking between napi poll and
      ndo_ll_poll at all.
      
      For ixgbe we only lock the RX queue.
      ndo_ll_poll does not touch the interrupt state or the TX queues.
      (earlier versions of this patchset did touch them,
      but this design is simpler and works better.)
      
      If a queue is actively polled by a socket (on another CPU) napi poll
      will not service it, but will wait until the queue can be locked
      and cleaned before doing a napi_complete().
      If a socket can't lock the queue because another CPU has it,
      either from napi or from another socket polling on the queue,
      the socket code can busy wait on the socket's skb queue.
      
      Ndo_ll_poll does not have preferential treatment for the data from the
      calling socket vs. data from others, so if another CPU is polling,
      you will see your data on this socket's queue when it arrives.
      
      Ndo_ll_poll is called with local BHs disabled, so it won't race on
      the same CPU with net_rx_action, which calls the napi poll method.
      
      2. Napi_hash
      The napi hash mechanism uses RCU.
      napi_by_id() must be called under rcu_read_lock().
      After a call to napi_hash_del(), caller must take care to wait an rcu
      grace period before freeing the memory containing the napi struct.
      (Ixgbe already had this because the queue vector structure uses rcu to
      protect the statistics counters in it.)
      
      how to test:
      
      1. The patchset should apply cleanly to net-next.
      (don't forget to configure INET_LL_RX_POLL).
      
      2. The ethtool -c setting for rx-usecs should be on the order of 100.
      
      3. Use ethtool -K to disable GRO and LRO
      (You are encouraged to try it both ways. If you find that your
      workload
      does better with GRO on do tell us.)
      
      4. Sysctl value net.core.low_latency_poll controls how long
      (in us) to busy-wait for more data, You are encouraged to play
      with this and see what works for you. The default is now 0 so you need
      to
      set it to turn the feature on. I recommend a value around 50.
      
      4. benchmark thread and IRQ should be bound to separate cores.
      Both cores should be on the same CPU NUMA node as the NIC.
      When the app and the IRQ run on the same CPU  you get a small penalty.
      If interrupt coalescing is set to a low value this penalty can be very
      large.
      
      5. If you suspect that your machine is not configured properly,
      use numademo to make sure that the CPU to memory BW is OK.
      numademo 128m memcpy local copy numbers should be more than
      8GB/s on a properly configured machine.
      
      Change log:
      v10
      - removed select/poll support. (we will work on this some more and try again)
      v9
      - correct sysctl proc_handler, reported by Eric Dumazet and Amir Vadai.
      - more int -> bool changes, reported by Eric Dumazet.
      - better mask testing in sock_poll(), reported by Eric Dumazet.
      
      v8
      - split out udp and select/poll into separate patches.
        what used to be patch 2/5 is now three patches.
      - type corrections from Amir Vadai and Cong Wang:
        one unsigned long that was left when changing to cycles_t
        int -> bool
      - more detailed patch descriptions.
      
      v7
      - suggested by Ben Hutchings and Eric Dumazet:
        type fixes, static for globals in net/core.c,
        avoid napi_id collisions in napi_hash_add()
      
      v6
      - many small fixes suggested by Eric Dumazet:
        data locality, typos, documentation
        protect napi_hash insert/delete with a spinlock (napi_gen_id is no
        longer atomic_t since it's only accessed with the spinlock held.)
      - added IPv6 TCP and UDP support (only minimally tested)
      
      v5
      - corrections suggested by Ben Hutchings:
        fixed typos, moved the config option and sysctl value from IPv4 to net
      - moved sk_mark_ll() to the protocol handlers
      - removed global id mechanism, replaced with a hashed napi_id.
        based on code sample from Eric Dumazet
        Note that ixgbe_free_q_vector() already waits an rcu grace period
        before freeing the q_vector, so nothing additional needs to be done
        when adding a call to napi_hash_del().
      - simple poll/select support
      
      v4
      - removed separate config option for TCP as suggested Eric Dumazet.
      - added linux mib counter for packets received through the low latency path,
        as suggested by Andi Kleen.
      - re-allow module unloading, remove module param, use a global generation id
        instead to prevent the use of a stale napi pointer, as suggested
        by Eric Dumazet
      - updated Documentation/networking/ip-sysctl.txt text
      
      v3
      - coding style changes suggested by Dave Miller
      
      v2
      - the sysctl knob is now in microseconds. The default value is now 0 (off).
      - for now the code depends at configure time on CONFIG_I86_TSC
      - the napi reference in struct skb is now a union with the dma cookie
        since the former is only used on RX and the latter on TX,
        as suggested by Eric Dumazet.
      - we do a better job at honoring non-blocking operations.
      - removed busy-polling support for tcp_read_sock()
      - remove dynamic disabling of GRO
      - coding style fixes
      - disallow unloading the device module after the feature has been used
      
      Credit:
      Jesse Brandeburg, Arun Chekhov Ilango, Julie Cummings,
      Alexander Duyck, Eric Geisler, Jason Neighbors, Yadong Li,
      Mike Polehn, Anil Vasudevan, Don Wood
      Special thanks for finding bugs in earlier versions:
      Willem de Bruijn and Andi Kleen
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a4db187
    • Eliezer Tamir's avatar
      ixgbe: add extra stats for ndo_ll_poll · 7e15b90f
      Eliezer Tamir authored
      Add additional statistics to the ixgbe driver for ndo_ll_poll
      Defined under LL_EXTENDED_STATS
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7e15b90f
    • Eliezer Tamir's avatar
      ixgbe: add support for ndo_ll_poll · 5a85e737
      Eliezer Tamir authored
      Add the ixgbe driver code implementing ndo_ll_poll.
      Adds ndo_ll_poll method and locking between it and the napi poll.
      When receiving a packet we use skb_mark_ll to record the napi it came from.
      Add each napi to the napi_hash right after netif_napi_add().
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a85e737
    • Eliezer Tamir's avatar
      tcp: add low latency socket poll support. · d30e383b
      Eliezer Tamir authored
      Adds low latency socket poll support for TCP.
      In tcp_v[46]_rcv() add a call to sk_mark_ll() to copy the napi_id
      from the skb to the sk.
      In tcp_recvmsg(), when there is no data in the socket we busy-poll.
      This is a good example of how to add busy-poll support to more protocols.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Tested-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d30e383b
    • Eliezer Tamir's avatar
      udp: add low latency socket poll support · a5b50476
      Eliezer Tamir authored
      Add upport for busy-polling on UDP sockets.
      In __udp[46]_lib_rcv add a call to sk_mark_ll() to copy the napi_id
      from the skb into the sk.
      This is done at the earliest possible moment, right after we identify
      which socket this skb is for.
      In __skb_recv_datagram When there is no data and the user
      tries to read we busy poll.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Tested-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5b50476
    • Eliezer Tamir's avatar
      net: add low latency socket poll · 06021292
      Eliezer Tamir authored
      Adds an ndo_ll_poll method and the code that supports it.
      This method can be used by low latency applications to busy-poll
      Ethernet device queues directly from the socket code.
      sysctl_net_ll_poll controls how many microseconds to poll.
      Default is zero (disabled).
      Individual protocol support will be added by subsequent patches.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Tested-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      06021292
    • Eliezer Tamir's avatar
      net: add napi_id and hash · af12fa6e
      Eliezer Tamir authored
      Adds a napi_id and a hashing mechanism to lookup a napi by id.
      This will be used by subsequent patches to implement low latency
      Ethernet device polling.
      Based on a code sample by Eric Dumazet.
      Signed-off-by: default avatarEliezer Tamir <eliezer.tamir@linux.intel.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Tested-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af12fa6e
  3. 10 Jun, 2013 3 commits
  4. 08 Jun, 2013 7 commits