- 13 Jan, 2021 20 commits
-
-
Stanimir Varbanov authored
Now when everything is in place wire up buffer requirements from hfi platform buffers to the buffer requirements helper. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Stanimir Varbanov authored
Handle progressive/interlaced bitstream event by similar way as bit depth. Signed-off-by:
-
Stanimir Varbanov authored
Wire up hfi platform codec and capabilities instead of getting them from firmware. Signed-off-by:
-
Stanimir Varbanov authored
Add a new file for hfi platform buffer size and count calculations for v6. Signed-off-by:
-
Stanimir Varbanov authored
>From Venus v6 and beyond the buffer size and count have to be calculated in the v4l2 driver instead of getting them from firmware. Signed-off-by:
-
Stanimir Varbanov authored
Add new hfi platform file with capabilities of hfi v6. Signed-off-by:
-
Stanimir Varbanov authored
Starting from v6 we have one more hfi property which will be needed to calculate buffer sizes/count for particular codec and session type. Signed-off-by:
-
Stanimir Varbanov authored
Add new file for Venus hfi v4 with supported codecs and capabilities. Signed-off-by:
-
Stanimir Varbanov authored
Add ops to get the supported by the platform codecs and capabilities. Signed-off-by:
-
Stanimir Varbanov authored
Now when we have hfi platform make venus capabilities an hfi platform capabilities. Signed-off-by:
-
Stanimir Varbanov authored
Introduce a new hfi platform to cover differences between hfi versions. As a start move vpp/vsp freq data in that hfi platform, more platform data will come later. Signed-off-by:
-
Stanimir Varbanov authored
Add more caps and VP9 definitions for newer Venus versions. Signed-off-by:
-
Stanimir Varbanov authored
The core caps are filled but not used, delete them. In case we need them we can re-introduce. Signed-off-by:
-
Stanimir Varbanov authored
Skip calculating instance frequency if it is not in running state. Signed-off-by:
-
Stanimir Varbanov authored
For resolutions below 720p the size of the compressed buffer must be bigger. Correct this by checking the resolution when calculating buffer size and multiply by eight. Signed-off-by:
-
Stanimir Varbanov authored
The hfi_session_init can be called many times and it returns EINVAL when the session was already initialized. This error code (EINVAL) is confusing for the callers. Change hfi_session_init to return EALREADY error code when the session has been already initialized. Tested-by:
Fritz Koenig <frkoenig@chromium.org> Signed-off-by:
-
Vikash Garodia authored
For synchronous commands, update the message queue variable. This would inform video firmware to raise interrupt on host CPU whenever there is a response for such commands. Signed-off-by:
Vikash Garodia <vgarodia@codeaurora.org> Tested-by:
-
Stanimir Varbanov authored
Currently we rely on firmware to return error when we reach the maximum supported number of sessions. But this errors are happened at reqbuf time which is a bit later. The more reasonable way looks like is to return the error on driver open. To achieve that modify hfi_session_create to return error when we reach maximum count of sessions and thus refuse open. Tested-by:
-
Stanimir Varbanov authored
Init the hfi session only once in queue_setup and also cover that with inst->lock. Tested-by:
-
Fritz Koenig authored
If the DRC is near the end of the stream the client may send a V4L2_DEC_CMD_STOP before the DRC occurs. V4L2_DEC_CMD_STOP puts the driver into the VENUS_DEC_STATE_DRAIN state. DRC must be aware so that after the DRC event the state can be restored correctly. Signed-off-by:
-
- 12 Jan, 2021 20 commits
-
-
Alexandre Courbot authored
DRC events can happen virtually at anytime, including when we are starting a seek. Should this happen, we must make sure to return to the DRC state, otherwise the firmware will expect buffers of the new resolution whereas userspace will still work with the old one. Returning to the DRC state upon resume for seeking makes sure that the client will get the DRC event and will reallocate the buffers to fit the firmware's expectations. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Stanimir Varbanov authored
After adding more logic in vdec buf_queue vb2 op it is not practical to have two lock/unlock for one decoder buf_queue. So move the instance lock in encoder and decoder vb2 buf_queue operations. Signed-off-by:
-
Stanimir Varbanov authored
This makes the decoder to behaives equally for sufficient and insufficient events. After this change the LAST buffer flag will be set when the new resolution (in dynamic-resolution-change state) is smaller then the old bitstream resolution. Signed-off-by:
-
Stanimir Varbanov authored
In real use of dynamic-resolution-change it is observed that the LAST buffer flag (which marks the last decoded buffer with the resolution before the resolution-change event) is not reliably set. Fix this by set the LAST buffer flag on next queued capture buffer after the resolution-change event. Signed-off-by:
-
Alexandre Courbot authored
This driver uses the SG vb2 ops, but effectively only ever accesses the first entry of the SG table, indicating that it expects a flat layout. Switch it to use the contiguous ops to make sure this expected invariant is always enforced. Since the device is supposed to be behind an IOMMU this should have little to none practical consequences beyond making the driver not rely on a particular behavior of the SG implementation. Reported-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Matwey V. Kornilov authored
This fixes the following newly introduced warning: [ 15.518253] ------------[ cut here ]------------ [ 15.518941] WARNING: CPU: 0 PID: 246 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x1a8/0x1d0 [ 15.520634] Modules linked in: pwc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc efivarfs [ 15.522335] CPU: 0 PID: 246 Comm: v4l2-test Not tainted 5.11.0-rc1+ #1 [ 15.523281] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 15.524438] RIP: 0010:dma_map_page_attrs+0x1a8/0x1d0 [ 15.525135] Code: 10 5b 5d 41 5c 41 5d c3 4d 89 d0 eb d7 4d 89 c8 89 e9 48 89 da e8 68 29 00 00 eb d1 48 89 f2 48 2b 50 18 48 89 d0 eb 83 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb b8 48 89 d9 48 8b 40 40 e8 61 69 d2 [ 15.527938] RSP: 0018:ffffa2694047bca8 EFLAGS: 00010246 [ 15.528716] RAX: 0000000000000000 RBX: 0000000000002580 RCX: 0000000000000000 [ 15.529782] RDX: 0000000000000000 RSI: ffffcdce000ecc00 RDI: ffffa0b4bdb888a0 [ 15.530849] RBP: 0000000000000002 R08: 0000000000000002 R09: 0000000000000000 [ 15.531881] R10: 0000000000000004 R11: 000000000002d8c0 R12: 0000000000000000 [ 15.532911] R13: ffffa0b4bdb88800 R14: ffffa0b483820000 R15: ffffa0b4bdb888a0 [ 15.533942] FS: 00007fc5fbb5e4c0(0000) GS:ffffa0b4fc000000(0000) knlGS:0000000000000000 [ 15.535141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.535988] CR2: 00007fc5fb6ea138 CR3: 0000000003812000 CR4: 00000000001506f0 [ 15.537025] Call Trace: [ 15.537425] start_streaming+0x2e9/0x4b0 [pwc] [ 15.538143] vb2_start_streaming+0x5e/0x110 [videobuf2_common] [ 15.538989] vb2_core_streamon+0x107/0x140 [videobuf2_common] [ 15.539831] __video_do_ioctl+0x18f/0x4a0 [videodev] [ 15.540670] video_usercopy+0x13a/0x5b0 [videodev] [ 15.541349] ? video_put_user+0x230/0x230 [videodev] [ 15.542096] ? selinux_file_ioctl+0x143/0x200 [ 15.542752] v4l2_ioctl+0x40/0x50 [videodev] [ 15.543360] __x64_sys_ioctl+0x89/0xc0 [ 15.543930] do_syscall_64+0x33/0x40 [ 15.544448] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 15.545236] RIP: 0033:0x7fc5fb671587 [ 15.545780] Code: b3 66 90 48 8b 05 11 49 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 48 2c 00 f7 d8 64 89 01 48 [ 15.548486] RSP: 002b:00007fff0f71f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 15.549578] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc5fb671587 [ 15.550664] RDX: 00007fff0f71f060 RSI: 0000000040045612 RDI: 0000000000000003 [ 15.551706] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 15.552738] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff0f71f060 [ 15.553817] R13: 00007fff0f71f1d0 R14: 0000000000de1270 R15: 0000000000000000 [ 15.554914] ---[ end trace 7be03122966c2486 ]--- Fixes: 1161db67 ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer") Signed-off-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by:
-
Dinghao Liu authored
When usb_clear_halt() fails, dvb->bulk_urb->transfer_buffer and dvb->bulk_urb should be freed just like when usb_submit_urb() fails. Fixes: 3169c9b2 ("V4L/DVB (12788): tm6000: Add initial DVB-T support") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Dinghao Liu authored
When vb2_queue_init() fails, dev->empress_dev should be released just like other error handling paths. Fixes: 2ada815f ("[media] saa7134: convert to vb2") Signed-off-by:
-
Zheng Yongjun authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Dinghao Liu authored
When kzalloc() fails, em28xx_uninit_usb_xfer() will free usb_bufs->buf and set it to NULL. Thus the later access to usb_bufs->buf[i] will lead to null pointer dereference. Also the kfree(usb_bufs->buf) after that is redundant. Fixes: d571b592 ("media: em28xx: don't use coherent buffer for DMA transfers") Signed-off-by:
-
Nigel Christian authored
Comment has 'then' repeated twice. Let's clean it up. Use unsigned int to maintain naming consistency. Signed-off-by:
Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by:
-
Kieran Bingham authored
These entries can only ever be single bits. Make use of the BIT macro accordingly. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Christophe JAILLET authored
A previous 'rcar_fcp_get()' call must be undone in the error handling path, as already done in the remove function. Fixes: 94fcdf82 ("[media] v4l: vsp1: Add FCP support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Sebastian Fricke authored
Implement the VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl for the isp entity, check if the mbus code is valid for the given pad. This call is not available for the parameter or metadata pads of the RkISP1. Signed-off-by:
Sebastian Fricke <sebastian.fricke.linux@gmail.com> Acked-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since commit 4c62e976 ("Drivers: media: remove __dev* attributes.") in v3.8, the SuperH Video Output Unit driver no longer has any code or data located in initmem, hence there is no need to annotate the sh_vou structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by:
-
Lukas Bulwahn authored
Commit aa821b2b ("media: MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver") introduced a new MAINTAINERS section, but the file entry points to the wrong location. Hence, ./scripts/get_maintainer.pl --self-test=patterns warns: warning: no file matches F: drivers/media/meson/ge2d/ Adjust the entry to the actual location of the driver. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Dan Carpenter authored
This error path returns success but it should return -EINVAL. Fixes: cba3819d ("media: camss: Format configuration per hardware version") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Dan Carpenter authored
This test has a problem because we want to know if "k" is -1 or a positive value less than "f->index". But the "f->index" variable is a u32 so if "k == -1" then -1 gets type promoted to UINT_MAX which is larger than "f->index". I've added an explicit test to check for -1. Fixes: a3d412d4 ("media: Revert "media: camss: Make use of V4L2_CAP_IO_MC"") Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Travis Carter authored
Corrected the following Warning: drivers/staging/media/rkvdec/rkvdec.c:133: WARNING: Possible comma where semicolon could be used Signed-off-by:
Travis Carter <traviscarter2@gmail.com> Signed-off-by:
-
