- 21 May, 2021 14 commits
-
-
Peng Ju Zhou authored
In SRIOV environment, KMD should access GC registers with RLCG if GC indirect access flag enabled. Signed-off-by:
Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Peng Ju Zhou authored
In SRIOV environment, KMD should access GC registers with RLCG if GC indirect access flag enabled. Signed-off-by:
-
Peng Ju Zhou authored
In SRIOV environment, KMD should access GC registers with RLCG if GC indirect access flag enabled. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Peng Ju Zhou authored
In SRIOV environment, KMD should access GC registers with RLCG if GC indirect access flag enabled. Signed-off-by:
-
Peng Ju Zhou authored
This patch series are used for GC/MMHUB(part)/IH_RB_CNTL indirect access in the SRIOV environment. There are 4 bits, controlled by host, to control if GC/MMHUB(part)/IH_RB_CNTL indirect access enabled. (one bit is master bit controls other 3 bits) For GC registers, changing all the register access from MMIO to RLC and use RLC as the default access method in the full access time. For partial MMHUB registers, changing their access from MMIO to RLC in the full access time, the remaining registers keep the original access method. For IH_RB_CNTL register, changing it's access from MMIO to PSP. Signed-off-by:
-
Chengming Gui authored
Update PPTable structure since SMC#73.9/IFWI-XXX.013 Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by:
-
Kevin Wang authored
1.correct KFD SDMA RLC queue register offset error. (all sdma rlc register offset is base on SDMA0.RLC0_RLC0_RB_CNTL) 2.HQD_N_REGS (19+6+7+12) 12: the 2 more resgisters than navi1x (SDMAx_RLCy_MIDCMD_DATA{9,10}) the patch also can be fixed NULL pointer issue when read /sys/kernel/debug/kfd/hqds on sienna_cichlid chip. Signed-off-by:Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
-
David M Nieto authored
Enable displaying DPM levels for VCN clocks in swsmu supported ASICs v2: removed set functions for navi, renoir v3: removed set function from arcturus v4: added missing defines in drm_table and remove uneeded goto label in navi10_ppt.c Signed-off-by:
David M Nieto <david.nieto@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
David M Nieto authored
Fill voltage fields in metrics table v2: Removed dpm and freq ranges info v3: Added check to ensure volrage offset is not zero Signed-off-by:
-
David M Nieto authored
v2: removed static dpm and frequency ranges from table expand metrics table with voltages and frequency ranges Signed-off-by:
-
Evan Quan authored
No MGpuFanBoost setting for those ASICs which do not support it. Otherwise, it may breaks their fan control feature. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1580Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
[Why] Conditions that end up modifying the global dc state must be locked. However, during mst allocate payload sequence, lock is already taken. With StarTech 1.2 DP hub, we get an HPD RX interrupt for a reason other than to indicate down reply availability right after sending payload allocation. The handler again takes dc lock before calling the dc's HPD RX handler. Due to this contention, the DRM thread which waits for MST down reply never gets a chance to finish its waiting successfully and ends up timing out. Once the lock is released, the hpd rx handler fires and goes ahead to read from the MST HUB, but now its too late and the HUB doesnt lightup all displays since DRM lacks error handling when payload allocation fails. [How] Take lock only if there is a change in link status or if automated test pattern bit is set. The latter fixes the null pointer dereference when running certain DP Link Layer Compliance test. Fixes: c8ea79a8 ("drm/amd/display: NULL pointer error during compliance test") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.14-2021-05-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-05-21: amdgpu: - RAS fixes - SR-IOV fixes - More BO management cleanups - Aldebaran fixes - Display fixes - Support for new GPU, Beige Goby - Backlight fixes amdkfd: - RAS fixes - DMA mapping fixes - HMM SVM fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210521045743.4047-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.14-2021-05-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-05-19: amdgpu: - Aldebaran updates - More LTTPR display work - Vangogh updates - SDMA 5.x GCR fixes - RAS fixes - PCIe ASPM support - Modifier fixes - Enable TMZ on Renoir - Buffer object code cleanup - Display overlay fixes - Initial support for multiple eDP panels - Initial SR-IOV support for Aldebaran - DP link training refactor - Misc code cleanups and bug fixes - SMU regression fixes for variable sized arrays - MAINTAINERS fixes for amdgpu amdkfd: - Initial SR-IOV support for Aldebaran - Topology fixes - Initial HMM SVM support - Misc code cleanups and bug fixes radeon: - Misc code cleanups and bug fixes - SMU regression fixes for variable sized arrays - Flickering fix for Oland with multiple 4K displays UAPI: - amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag. This was always a kernel internal flag and userspace use of it has always been blocked. It's no longer needed so remove it. - amdkgd: HMM SVM support Overview: https://patchwork.freedesktop.org/series/85562/ Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wipSigned-off-by:
-
- 20 May, 2021 26 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-2021-05-19-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose). Driver Changes: - Display plane clock rates fixes and improvements (Ville). - Uninint DMC FW loader state during shutdown (Imre). - Convert snprintf to sysfs_emit (Xuezhi). - Fix invalid access to ACPI _DSM objects (Takashi). - A big refactor around how i915 addresses the graphics and display IP versions. (Matt, Lucas). - Backlight fix (Lyude). - Display watermark and DBUF fixes (Ville). - HDCP fix (Anshuman). - Improve cases where display is not available (Jose). - Defeature PSR2 for RKL and ALD-S (Jose). - VLV DSI panel power fixes and improvements (Hans). - display-12 workaround (Jose). - Fix modesetting (Imre). - Drop redundant address-of op before lttpr_common_caps array (Imre). - Fix compiler checks (Jose, Jason). - GLK display fixes (Ville). - Fix error code returns (Dan). - eDP novel: back again to slow and wide link training everywhere (Kai-Heng). - Abstract DMC FW path (Rodrigo). - Preparation and changes for upcoming XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh). - Fix comment typo in DSI code (zuoqilin). - Simplify CCS and UV plane alignment handling (Imre). - PSR Fixes on TGL (Gwan-gyeong, Jose). - Add intel_dp_hdcp.h and rename init (Jani). - Move crtc and dpll declarations around (Jani). - Fix pre-skl DP AUX precharge length (Ville). - Remove stray newlines from random files (Ville). - crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville). - Add frontbuffer tracking tracepoints (Ville). - ADL-S PCI ID updates (Anand). - Use unique backlight device names (Jani). - A few clean-ups on i915/audio (Jani). - Use intel_framebuffer instead of drm one on intel_fb functions (Imre). - Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre). - Nuke display error state (Ville). - ADL-P initial enablement patches starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika). - Display clean-up around VBT and the strap bits (Lucas). - Try YCbCr420 color when RGB fails (Werner). - More PSR fixes and improvements (Jose). - Other generic display code clean-up (Jose, Ville). - Use correct downstream caps for check Src-Ctl mode for PCON (Ankit). - Disable HiZ Raw Stall Optimization on broken gen7 (Simon). Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.14: UAPI Changes: Cross-subsystem Changes: Core Changes: * aperture: Fix unlocking on errors * legacy: Fix some doc comments Driver Changes: * drm/amdgpu: Free resource on fence usage query; Fix fence calculation; * drm/bridge: Lt9611: Add missing MODULE_DEVICE_TABLE * drm/i915: Print formats with %p4cc * drm/ingenic: IPU planes are now always of type OVERLAY * drm/nouveau: Remove left-over reference to struct drm_device.pdev * drm/panfrost: Disable devfreq if num_supplies > 1; Add Mediatek MT8183 + DT bindings; Cleanups * drm/simpledrm: Print resources with %pr; Fix use-after-free errors; Fix NULL deref; Fix MAINTAINERS entry * drm/vmwgfx: Fix memory allocation and leak in FIFO allocation; Fix return value in PCI resource setup Signed-off-by:
-
Christian König authored
This unfortunately comes up in regular intervals and breaks GPU reset for the engine in question. The sched.ready flag controls if an engine can't get working during hw_init, but should never be set to false during hw_fini. v2: squash in unused variable fix (Alex) Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Lang Yu authored
When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log: [ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer [ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario: [ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK *** [ 806.333747] May be due to missing lock nesting notation [ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu] Signed-off-by:Lang Yu <Lang.Yu@amd.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Aaron Liu authored
Starting from Navi+, the rlc reference clock is used for system clock from vbios gfx_info table. It is incorrect to use core_refclk_10khz of vbios smu_info table as system clock. Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Guchun Chen authored
Current golden setting is out of date. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
Guchun Chen authored
Current golden setting is out of date. Signed-off-by:
-
xinhui pan authored
looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
-
Alex Deucher authored
To stay consistent with the user's setting. v2: rebase on multi-eDP support Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Deucher authored
And cache the value. These can be used by the backlight callbacks and modesetting functions. v2: rebase on latest backlight changes. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337Reviewed-by:
-
Mukul Joshi authored
For Aldebaran, driver needs to query DramMegaBaseAddress to check if DF hashing is enabled. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Acked-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
James Zhu authored
Add video_codecs query support for aldebaran. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Dennis Li authored
The function kfd_lookup_process_by_pasid will increase the reference count of kfd_process object, its caller should call kfd_unref_process to decrease the reference count. Otherwise resource leakage will happen. Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Felix Kuehling authored
The dmabuf attachment should be updated by moving the SG BO to DOMAIN_CPU and back to DOMAIN_GTT. This does not necessarily invoke the populate/unpopulate callbacks. Do this in backend_bind/unbind instead. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Acked-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Signed-off-by:
-
Felix Kuehling authored
Use DMABufs with dynamic attachment to DMA-map GTT BOs on other GPUs. Signed-off-by:
-
Felix Kuehling authored
This is needed to avoid deadlocks with DMA buf import in the next patch. Also move PT/PD validation out of kfd_mem_attach, that way the caller can bo this unconditionally. Signed-off-by:
-
Felix Kuehling authored
DMA map kfd_mem_attachments in update_gpuvm_pte. This function is called with the BO and page tables reserved, so we can safely update the DMA mapping. DMA unmap when a BO is unmapped from a GPU and before updating mappings in restore workers. Signed-off-by:
-
Felix Kuehling authored
Add BO-type specific helpers functions to DMA-map and unmap kfd_mem_attachments. Implement this functionality for userptrs by creating one SG BO per GPU and filling it with a DMA mapping of the pages from the original mem->bo. Signed-off-by:
-
Felix Kuehling authored
Do AQL queue double-mapping with a single attach call. That will make it easier to create per-GPU BOs later, to be shared between the two BO VA mappings on the same GPU. Freeing the attachments is not necessary if map_to_gpu fails. These will be cleaned up when the kdg_mem object is destroyed in amdgpu_amdkfd_gpuvm_free_memory_of_gpu. Signed-off-by:
-
Felix Kuehling authored
For now they all reference the same BO. For correct DMA mappings they will refer to different BOs per-GPU. Signed-off-by:
-
Felix Kuehling authored
This name is more fitting, especially for the changes coming next to support multi-GPU systems with proper DMA mappings. Cleaned up the code and renamed some related functions and variables to improve readability. Signed-off-by:
-
Jingwen Chen authored
[Why] the gem object rfb->base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes [How] put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Acked-by:
-
YuBiao Wang authored
[Why] IH_RB_CNTL is blocked by PSP so we need to ask psp to help config it. [How] Move psp ip block before ih, and use psp to program IH_RB_CNTL under sriov. Reviewed-by:
Chen, Horace <Horace.Chen@amd.com> Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Signed-off-by:
-
Joe Perches authored
/n should be \n Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] MALL requires idle optimizations to be enabled. This enables MALL feature on dcn303 Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] Add beige_goby_ta.bin to module firmware table and call psp init for TA Signed-off-by:
-
