- 26 Mar, 2018 40 commits
-
-
David Sterba authored
There's a proper header for xattr handlers. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
The xattr_handler::get prototype returns int, use it. The only ssize_t exception is the per-inode listxattr handler. Reviewed-by:
-
David Sterba authored
Extern for functions does not make any difference, there are only a few so let's remove them before it's too late. Reviewed-by:
-
David Sterba authored
Reviewed-by:
-
Filipe Manana authored
When send finishes processing an inode representing a regular file, it always issues a truncate operation for that file, even if its size did not change or the last write sets the file size correctly. In the most common cases, the issued write operations set the file to correct size (either full or incremental sends) or the file size did not change (for incremental sends), so the only case where a truncate operation is needed is when a file size becomes smaller in the send snapshot when compared to the parent snapshot. By not issuing unnecessary truncate operations we reduce the stream size and save time in the receiver. Currently truncating a file to the same size triggers writeback of its last page (if it's dirty) and waits for it to complete (only if the file size is not aligned with the filesystem's sector size). This is being fixed by another patch and is independent of this change (that patch's title is "Btrfs: skip writeback of last page when truncating file to same size"). The following script was used to measure time spent by a receiver without this change applied, with this change applied, and without this change and with the truncate fix applied (the fix to not make it start and wait for writeback to complete). $ cat test_send.sh #!/bin/bash SRC_DEV=/dev/sdc DST_DEV=/dev/sdd SRC_MNT=/mnt/sdc DST_MNT=/mnt/sdd mkfs.btrfs -f $SRC_DEV >/dev/null mkfs.btrfs -f $DST_DEV >/dev/null mount $SRC_DEV $SRC_MNT mount $DST_DEV $DST_MNT echo "Creating source filesystem" for ((t = 0; t < 10; t++)); do ( for ((i = 1; i <= 20000; i++)); do xfs_io -f -c "pwrite -S 0xab 0 5000" \ $SRC_MNT/file_$i > /dev/null done ) & worker_pids[$t]=$! done wait ${worker_pids[@]} echo "Creating and sending snapshot" btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null /usr/bin/time -f "send took %e seconds" \ btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1 /usr/bin/time -f "receive took %e seconds" \ btrfs receive -f $SRC_MNT/send_file $DST_MNT umount $SRC_MNT umount $DST_MNT The results, which are averages for 5 runs for each case, were the following: * Without this change average receive time was 26.49 seconds standard deviation of 2.53 seconds * Without this change and with the truncate fix average receive time was 12.51 seconds standard deviation of 0.32 seconds * With this change and without the truncate fix average receive time was 10.02 seconds standard deviation of 1.11 seconds Signed-off-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
When we truncate a file to the same size and that size is not aligned with the sector size, we end up triggering writeback (and wait for it to complete) of the last page. This is unncessary as we can not have delayed allocation beyond the inode's i_size and the goal of truncating a file to its own size is to discard prealloc extents (allocated via the fallocate(2) system call). Besides the unnecessary IO start and wait, it also breaks the oppurtunity for larger contiguous extents on disk, as before the last dirty page there might be other dirty pages. This scenario is probably not very common in general, however it is common for btrfs receive implementations because currently the send stream always issues a truncate operation for each processed inode as the last operation for that inode (this truncate operation is not always needed and the send implementation will be addressed to avoid them). So improve this by not starting and waiting for writeback of the inode's last page when we are truncating to exactly the same size. The following script was used to quickly measure the time a receive operation takes: $ cat test_send.sh #!/bin/bash SRC_DEV=/dev/sdc DST_DEV=/dev/sdd SRC_MNT=/mnt/sdc DST_MNT=/mnt/sdd mkfs.btrfs -f $SRC_DEV >/dev/null mkfs.btrfs -f $DST_DEV >/dev/null mount $SRC_DEV $SRC_MNT mount $DST_DEV $DST_MNT echo "Creating source filesystem" for ((t = 0; t < 10; t++)); do ( for ((i = 1; i <= 20000; i++)); do xfs_io -f -c "pwrite -S 0xab 0 5000" \ $SRC_MNT/file_$i > /dev/null done ) & worker_pids[$t]=$! done wait ${worker_pids[@]} echo "Creating and sending snapshot" btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null /usr/bin/time -f "send took %e seconds" \ btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1 /usr/bin/time -f "receive took %e seconds" \ btrfs receive -f $SRC_MNT/send_file $DST_MNT umount $SRC_MNT umount $DST_MNT The results for 5 runs were the following: * Without this change average receive time was 26.49 seconds standard deviation of 2.53 seconds * With this change average receive time was 12.51 seconds standard deviation of 0.32 seconds Reported-by:Robbie Ko <robbieko@synology.com> Signed-off-by:
-
Liu Bo authored
It doens't make sense to process prealloc extents as pages will be filled with zero when reading prealloc extents. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Anand Jain authored
We have btrfs_fs_info::data_chunk_allocations and btrfs_fs_info::metadata_ratio declared as unsigned which would be unsinged int and kernel style prefers unsigned int over bare unsigned. So this patch changes them to u32. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Nikolay Borisov authored
Using any kind of memory barriers around atomic operations which have a return value is redundant, since those operations themselves are fully ordered. atomic_t.txt states: - RMW operations that have a return value are fully ordered; Fully ordered primitives are ordered against everything prior and everything subsequent. Therefore a fully ordered primitive is like having an smp_mb() before and an smp_mb() after the primitive. Given this let's replace the extra memory barriers with comments. Signed-off-by: -
Anand Jain authored
In the same function we just ran btrfs_alloc_device() which means the btrfs_device::resized_list is sure to be empty and we are protected with the btrfs_fs_info::volume_mutex. Signed-off-by:
-
David Sterba authored
The __cold functions are placed to a special section, as they're expected to be called rarely. This could help i-cache prefetches or help compiler to decide which branches are more/less likely to be taken without any other annotations needed. Though we can't add more __exit annotations, it's still possible to add __cold (that's also added with __exit). That way the following function categories are tagged: - printf wrappers, error messages - exit helpers Signed-off-by: -
David Sterba authored
Recently, the __init annotations have been added. There's unfortunatelly only one case where we can add __exit, because most of the cleanup helpers are also called from the __init phase. As the __exit annotated functions get discarded completely for a built-in code, we'd miss them from the init phase. Signed-off-by: -
Anand Jain authored
We aren't verifying the parameter passed to the subvolid mount option, so we won't report and fail the mount if a junk value is specified for example, -o subvolid=abc. This patch verifies the subvolid option with match_u64. Up to now the memparse function accepts the K/M/G/ suffixes, that are usually meant for size values and do not make sense for a subvolume it. Signed-off-by:
-
Liu Bo authored
Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable@vger.kernel.org> v2.6.28+ Fixes: 17d217fe ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by:
-
Nikolay Borisov authored
The custom crc32 init code was introduced in 14a958e6 ("Btrfs: fix btrfs boot when compiled as built-in") to enable using btrfs as a built-in. However, later as pointed out by 60efa5eb ("Btrfs: use late_initcall instead of module_init") this wasn't enough and finally btrfs was switched to late_initcall which comes after the generic crc32c implementation is initiliased. The latter commit superseeded the former. Now that we don't have to maintain our own code let's just remove it and switch to using the generic implementation. Despite touching a lot of files the patch is really simple. Here is the gist of the changes: 1. Select LIBCRC32C rather than the low-level modules. 2. s/btrfs_crc32c/crc32c/g 3. replace hash.h with linux/crc32c.h 4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly. I've tested this with btrfs being both a module and a built-in and xfstest doesn't complain. Does seem to fix the longstanding problem of not automatically selectiong the crc32c module when btrfs is used. Possibly there is a workaround in dracut. The modinfo confirms that now all the module dependencies are there: before: depends: zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate after: depends: libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate Signed-off-by:
-
Nikolay Borisov authored
This function returns a string with the currently in-use implementation of the crc32c algorithm, i.e crc32c-generic (for unoptimised, generic implementation) or crc32c-intel for the sse optimised version. This will be used by btrfs. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> [ use crypto_shash_driver_name as suggested by Herbert ] Signed-off-by:
-
Qu Wenruo authored
Function __get_raid_index() is used to convert block group flags into raid index, which can be used to get various info directly from btrfs_raid_array[]. Refactor this function a little: 1) Rename to btrfs_bg_flags_to_raid_index() Double underline prefix is normally for internal functions, while the function is used by both extent-tree and volumes. Although the name is a little longer, but it should explain its usage quite well. 2) Move it to volumes.h and make it static inline Just several if-else branches, really no need to define it as a normal function. This also makes later code re-use between kernel and btrfs-progs easier. 3) Remove function get_block_group_index() Really no need to do such a simple thing as an exported function. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
When inspecting the error message with real corruption, the "root=%llu" always shows "1" (root tree), instead of the correct owner. The problem is that we are getting @root from page->mapping->host, which points the same btree inode, so we will always get the same root. This makes the root owner output meaningless, and harder to port tree-checker to btrfs-progs. So get rid of the false and meaningless @root parameter and replace it with @fs_info. To get the owner, we can only rely on btrfs_header_owner() now. Signed-off-by:
-
Liu Bo authored
This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the subtle bugs around merge_extent_mapping. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Nikolay Borisov authored
Currently btrfs_run_qgroups is doing a bit too much. Not only is it responsible for synchronizing in-memory state of qgroups to disk but it also contains code to trigger the initial qgroup rescan when quota is enabled initially. This condition is detected by checking that BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set. Nothing really requires from the code to be structured (and scattered) the way it is so let's streamline things. First move the quota rescan code into btrfs_quota_enable, where its invocation is closer to the use. This also makes the FS_QUOTA_ENABLING flag redundant so let's remove it as well. This has been tested with a full xfstest run with qgroups enabled on the scratch device of every xfstest and no regressions were observed. Signed-off-by:
-
Gu JinXiang authored
load_free_space_tree calls either function load_free_space_bitmaps or load_free_space_extents. And either of those two will lead to call btrfs_next_item. So in function load_free_space_tree, use READA_FORWARD to read forward ahead. This also changes the value from READA_BACK to READA_FORWARD, since according to the logic, it should reada_for_search forward, not backward. Signed-off-by:
Gu JinXiang <gujx@cn.fujitsu.com> Reviewed-by:
-
Gu Jinxiang authored
populate_free_space_tree calls function btrfs_search_slot_for_read with parameter int find_higher = 1, it means that, if no exact match is found, then use the next higher item. So in function populate_free_space_tree, use READA_FORWARD to read forward ahead. This also changes the value from READA_BACK to READA_FORWARD, since according to the logic, it should reada_for_search forward, not backward. Signed-off-by:
-
Nikolay Borisov authored
delayed_iput_count wa supposed to be used to implement, well, delayed iput. The idea is that we keep accumulating the number of iputs we do until eventually the inode is deleted. Turns out we never really switched the delayed_iput_count from 0 to 1, hence all conditional code relying on the value of that member being different than 0 was never executed. This, as it turns out, didn't cause any problem due to the simple fact that the generic inode's i_count member was always used to count the number of iputs. So let's just remove the unused member and all unused code. This patch essentially provides no functional changes. While at it, also add proper documentation for btrfs_add_delayed_iput Signed-off-by:
-
Qu Wenruo authored
Cleanup the following things: 1) open coded SZ_16M round up 2) use min() to replace open-coded size comparison 3) code style Signed-off-by:
-
Nikolay Borisov authored
The behavior of btrfs_delalloc_reserve_metadata depends on whether the inode we are allocating for is the freespace inode or not. As it stands if we are the free node we set 'flush' and 'delalloc_lock' variable to certain values. Subsequently we check the values of those vars and act accordingly. Instead, simplify things by having 1 if which checks whether we are the freespace inode or not and do any specific operation in either branches of that if. This makes the code a bit easier to understand, as an added bonus it also shrinks the compiled size: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-17 (-17) Function old new delta btrfs_delalloc_reserve_metadata 1876 1859 -17 Total: Before=85966, After=85949, chg -0.02% No functional changes. Signed-off-by:
Edmund Nadolski <enadolski@suse.com> Signed-off-by:
-
Anand Jain authored
Add opened device to the tail of dev_alloc_list instead of head, so that it maintains the same order as dev_list. Signed-off-by:
-
Anand Jain authored
By maintaining the device list sorted lets us reproduce the problems related to missing chunk in the degraded mode much more consistent. So fix this by sorting the devices by devid within the kernel. So that we know which device is assigned to the struct fs_info::latest_bdev when all the devices are having and same SB generation. Signed-off-by:
-
Liu Bo authored
It's not necessary to hold ->orphan_lock when checking inode's runtime flags. Signed-off-by:
-
Nikolay Borisov authored
Instead of manually fiddling with the state of the task (RUNNING->INTERRUPTIBLE->RUNNING) again just use schedule_timeout_interruptible which adjusts the task state as needed. No functional changes. Signed-off-by:
-
Nikolay Borisov authored
Even though btrfs_start_dirty_block_groups is fairly in the beginning of btrfs_commit_transaction outside of the critical section defined by the transaction states it can only be run by a single comitter. In other words it defines its own critical section thanks to the BTRFS_TRANS_DIRTY_BG run flag and ro_block_group_mutex. However, its error handling is outside of this critical section which is a bit counter-intuitive. So move the error handling righ after the function is executed and let the sole runner of dirty block groups handle the return value. No functional changes. Signed-off-by:
-
Anand Jain authored
bio_add_page() can fail for logical reasons as from the bio_add_page() comments: /* * This will only fail if either bio->bi_vcnt == bio->bi_max_vecs or * it's a cloned bio. */ Here we have just allocated the bio, so both of those failures can't occur. So drop the check. We can also drop the error stats for write error. Signed-off-by:
-
Qu Wenruo authored
Enospc_debug makes extent allocator print more debug messages, however for chunk allocation, there is no debug message for enospc_debug at all. This patch will add message for the following parts of chunk allocator: 1) No rw device at all Quite rare, but at least output one message for this case. 2) Not enough space for some device This debug message is quite handy for unbalanced disks with stripe based profiles (RAID0/10/5/6). 3) Not enough free devices This debug message should tell us if current chunk allocator is working correctly under minimal device requirements. Although in most cases, we will hit other ENOSPC before we even hit a chunk allocator ENOSPC, but such debug info won't help. Signed-off-by:
-
Anand Jain authored
Use ASSERT to report logical error in cow_file_range(), also move it a bit closer to when the num_bytes is derived. The extent start could be (u64)-1 in some cases, the assert should catch that we do not accidentally pass it to cow_file_range. Signed-off-by:
-
Anand Jain authored
This patch deletes local variable disk_num_bytes as its value is same as num_bytes in the function cow_file_range(). Signed-off-by:
-
Anand Jain authored
Commit [1] removed the need to use btrfs_async_submit_limit(), so delete it. [1] commit 736cd52e Btrfs: remove nr_async_submits and async_submit_draining Signed-off-by:
-
Yang Shi authored
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by btrfs at all. So, remove the unused hardirq.h. Signed-off-by:
Yang Shi <yang.s@alibaba-inc.com> Signed-off-by:
-
Nikolay Borisov authored
Currently when enospc_debug mount option is turned on we do not print any debug info in case metadata reservation failures happen. Fix this by adding the necessary hook in reserve_metadata_bytes. Signed-off-by:
-
Nikolay Borisov authored
The reason why io_bgs can be modified without holding any lock is non-obvious. Document it and reference that documentation from the respective call sites. Signed-off-by:
-
Nikolay Borisov authored
list_first_entry is essentially a wrapper over cotnainer_of. The latter can never return null even if it's working on inconsistent list since it will either crash or return some offset in the wrong struct. Additionally, for the dirty_bgs list the iteration is done under dirty_bgs_lock which ensures consistency of the list. Signed-off-by:
-
Anand Jain authored
For debugging or administration purposes, we would want to know if and when the user cancels the replace, to complement the existing messages when dev-replace starts or finishes. Signed-off-by:
-
