- 31 May, 2023 15 commits
-
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Link: https://lore.kernel.org/r/20230530155745.343032-1-azeemshaikh38@gmail.comReviewed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bartosz Golaszewski authored
Add the compatible string for the UFS on sa8775p platforms. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230411130446.401440-2-brgl@bgdev.plReviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Avri Altman authored
Do not open code SZ_x. Signed-off-by:
Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20230531070009.4593-1-avri.altman@wdc.comReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Keoseong Park <keosung.park@samsung.com> Signed-off-by:
-
Martin K. Petersen authored
Bart Van Assche <bvanassche@acm.org> says: In the traces we recorded while testing zoned storage we noticed that UFS commands are requeued while the clock is being ungated. Command requeueing makes it harder than necessary to preserve the command order. Hence this patch series that modifies the SCSI core and also the UFS driver such that clock ungating does not trigger command requeueing. Link: https://lore.kernel.org/r/20230529202640.11883-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Ungating the clock asynchronously causes ufshcd_queuecommand() to return SCSI_MLQUEUE_HOST_BUSY and hence causes commands to be requeued. This is suboptimal. Allow ufshcd_queuecommand() to sleep such that clock ungating does not trigger command requeuing. Remove the ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests() calls because these are no longer needed. The flush_work(&hba->clk_gating.ungate_work) call is sufficient to make the SCSI core wait for clock ungating to complete. Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529202640.11883-6-bvanassche@acm.orgReviewed-by:
Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by:
-
Bart Van Assche authored
ufshcd_hold() and ufshcd_release are declared twice: once in drivers/ufs/core/ufshcd-priv.h and a second time in include/ufs/ufshcd.h. Remove the declarations from ufshcd-priv.h. Fixes: dd11376b ("scsi: ufs: Split the drivers/scsi/ufs directory") Signed-off-by:
-
Bart Van Assche authored
Prepare for adding code in ufshcd_queuecommand() that may sleep. Acked-by:
-
Bart Van Assche authored
Prepare for adding code in ufshcd_queuecommand() that may sleep. This patch is similar to a patch posted last year by Mike Christie. See also https://lore.kernel.org/all/20220308003957.123312-2-michael.christie@oracle.com/ Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Make scsi_host_block() easier to read by converting it to the widely used early-return style. See also commit f983622a ("scsi: core: Avoid calling synchronize_rcu() for each device in scsi_host_block()"). Reviewed-by:
Mike Christie <michael.christie@oracle.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Cc: Ye Bin <yebin10@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Christophe JAILLET authored
'inq_result' is known to be NULL. There is no point calling kfree(). Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/08740635cdb0f8293e57c557b22e048daae50961.1685345683.git.christophe.jaillet@wanadoo.frReviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Damien Le Moal authored
Add missing description of the spg argument of ata_msense_control(). Fixes: df60f9c6 ("scsi: ata: libata: Add ATA feature control sub-page translation") Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230523074701.293502-1-dlemoal@kernel.orgReviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by:
-
Dan Carpenter authored
This loop will exit successfully when "found" is false or in the failure case it times out with "wait_iter" set to -1. The test for timeouts is impossible as is. Fixes: b843adde ("scsi: qla2xxx: Fix mem access after free") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/cea5a62f-b873-4347-8f8e-c67527ced8d2@kili.mountainSigned-off-by:
-
Bart Van Assche authored
Instead of running the request queue of each device associated with a host every 3 ms (BLK_MQ_RESOURCE_DELAY) while host error handling is in progress, run the request queue after error handling has finished. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
If a command fails, SCSI sense data is essential to determine why it failed. Hence make the sense key, ASC and ASCQ codes available in the ftrace output. Cc: Niklas Cassel <niklas.cassel@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Use min() instead of open-coding it in scsi_normalize_sense(). Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
- 22 May, 2023 25 commits
-
-
Randy Dunlap authored
Make the chapter heading concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230518212749.18266-12-rdunlap@infradead.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Make the chapter heading concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
Randy Dunlap authored
Include "Megaraid" in the chapter heading so that it is clear what subject the document is about. This improves viewing in the TOC. Signed-off-by:
-
Randy Dunlap authored
Make the chapter heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
Finn Thain <fthain@linux-m68k.org> Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Spell "CDROM" as "CD-ROM". Capitalize "Linux". Use https instead of http for URLs. Drop the Linux Documentation Project URL for the SCSI generic HOWTO since it hasn't been updated since 2002. Use Doug Gilbert's URL for it instead. Drop some outdated documentation & references. Signed-off-by:
-
Randy Dunlap authored
Fix the typo "Tansport" to be "Transport". Update email address for James Smart. Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
Randy Dunlap authored
Make the heading be concise yet still descriptive. This makes the subsystem table of contents more readable (IMO). Signed-off-by:
-
Randy Dunlap authored
Add a chapter heading so that the document sections are not all at the same level, mucking up the SCSI subsystem contents. Signed-off-by:
-
Randy Dunlap authored
Modify URLs to use https instead of http. Remove ancient URLs that don't work. Change "scsi" in text to "SCSI". Change "cdrom" in text to "CD-ROM". Drop the reference to "autoclean" for modules since I can't find it in any current documentation. Signed-off-by:
-
Randy Dunlap authored
Break the SCSI documentation up into categories: Introduction, APIs, driver parameters, and host adapter drivers instead of alphabetical by document file name (i.e., no organization). Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in a couple of structures, and refactor the rest of the code, accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/295 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/6c6dcab88524c14c47fd06b9332bd96162656db5.1684358315.git.gustavoars@kernel.orgReviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christophe JAILLET authored
Bitmaps are "unsigned long[]", so better use "unsigned long *" instead of a plain "void *" when dealing with pointers to bitmaps. This is more informative. Signed-off-by:
-
Yuchen Yang authored
Smatch complains that: tw_probe() warn: missing error code 'retval' This patch adds error checking to tw_probe() to handle initialization failure. If tw_reset_sequence() function returns a non-zero value, the function will return -EINVAL to indicate initialization failure. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Yuchen Yang <u202114568@hust.edu.cn> Link: https://lore.kernel.org/r/20230505141259.7730-1-u202114568@hust.edu.cnReviewed-by:
-
Keoseong Park authored
The 'err' variable is used only as the result of ufshcd_hba_init_crypto_capabilities(), so return 'err' immediately when failed. If it is not an error, explicitly return 0. Signed-off-by:
-
Martin K. Petersen authored
Niklas Cassel <nks@flawful.org> says: This series adds support for Command Duration Limits. The series is based on linux tag: v6.4-rc1 The series can also be found in git: https://github.com/floatious/linux/commits/cdl-v7 ================= CDL in ATA / SCSI ================= Command Duration Limits is defined in: T13 ATA Command Set - 5 (ACS-5) and T10 SCSI Primary Commands - 6 (SPC-6) respectively (a simpler version of CDL is defined in T10 SPC-5). CDL defines Duration Limits Descriptors (DLD). 7 DLDs for read commands and 7 DLDs for write commands. Simply put, a DLD contains a limit and a policy. A command can specify that a certain limit should be applied by setting the DLD index field (3 bits, so 0-7) in the command itself. The DLD index points to one of the 7 DLDs. DLD index 0 means no descriptor, so no limit. DLD index 1-7 means DLD 1-7. A DLD can have a few different policies, but the two major ones are: -Policy 0xF (abort), command will be completed with command aborted error (ATA) or status CHECK CONDITION (SCSI), with sense data indicating that the command timed out. -Policy 0xD (complete-unavailable), command will be completed without error (ATA) or status GOOD (SCSI), with sense data indicating that the command timed out. Note that the command will not have transferred any data to/from the device when the command timed out, even though the command returned success. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. The DLDs are defined in the CDL log page(s) and are readable and writable. Reading and writing the CDL DLDs are outside the scope of the kernel. If a user wants to read or write the descriptors, they can do so using a user-space application that sends passthrough commands, such as cdl-tools: https://github.com/westerndigitalcorporation/cdl-tools ================================ The introduction of ioprio hints ================================ What the kernel does provide, is a method to let I/O use one of the CDL DLDs defined in the device. Note that the kernel will simply forward the DLD index to the device, so the kernel currently does not know, nor does it need to know, how the DLDs are defined inside the device. The way that the CDL DLD index is supplied to the kernel is by introducing a new 10 bit "ioprio hint" field within the existing 16 bit ioprio definition. Currently, only 6 out of the 16 ioprio bits are in use, the remaining 10 bits are unused, and are currently explicitly disallowed to be set by the kernel. For now, we only add ioprio hints representing CDL DLD index 1-7. Additional ioprio hints for other QoS features could be defined in the future. A theoretical future work could be to make an I/O scheduler aware of these hints. E.g. for CDL, an I/O scheduler could make use of the duration limit in each descriptor, and take that information into account while scheduling commands. Right now, the ioprio hints will be ignored by the I/O schedulers. ============================== How to use CDL from user-space ============================== Since CDL is mutually exclusive with NCQ priority (see ncq_prio_enable and sas_ncq_prio_enable in Documentation/ABI/testing/sysfs-block-device), CDL has to be explicitly enabled using: echo 1 > /sys/block/$bdev/device/cdl_enable Since the ioprio hints are supplied through the existing I/O priority API, it should be simple for an application to make use of the ioprio hints. It simply has to reuse one of the new macros defined in include/uapi/linux/ioprio.h: IOPRIO_PRIO_HINT() or IOPRIO_PRIO_VALUE_HINT(), and supply one of the new hints defined in include/uapi/linux/ioprio.h: IOPRIO_HINT_DEV_DURATION_LIMIT_[1-7], which indicates that the I/O should use the corresponding CDL DLD index 1-7. By reusing the I/O priority API, the user can both define a DLD to use per AIO (io_uring sqe->ioprio or libaio iocb->aio_reqprio) or per-thread (ioprio_set()). ======= Testing ======= With the following fio patches: https://github.com/floatious/fio/commits/cdl fio adds support for ioprio hints, such that CDL can be tested using e.g.: fio --ioengine=io_uring --cmdprio_percentage=10 --cmdprio_hint=DLD_index A simple way to test is to use a DLD with a very short duration limit, and send large reads. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. We also provide a CDL test suite located in the cdl-tools repo, see: https://github.com/westerndigitalcorporation/cdl-tools#testing-a-system-command-duration-limits-support We have tested this patch series using: -real hardware -the following QEMU implementation: https://github.com/floatious/qemu/tree/cdl (NOTE: the QEMU implementation requires you to define the CDL policy at compile time, so you currently need to recompile QEMU when switching between policies.) =================== Further information =================== For further information about CDL, see Damien's slides: Presented at SDC 2021: https://www.snia.org/sites/default/files/SDC/2021/pdfs/SNIA-SDC21-LeMoal-Be-On-Time-command-duration-limits-Feature-Support-in%20Linux.pdf Presented at Lund Linux Con 2022: https://drive.google.com/file/d/1I6ChFc0h4JY9qZdO1bY5oCAdYCSZVqWw/view?usp=sharing ================ Changes since V6 ================ -Rebased series on v6.4-rc1. -Picked up Reviewed-by tags from Hannes (Thank you Hannes!) -Picked up Reviewed-by tag from Christoph (Thank you Christoph!) -Changed KernelVersion from 6.4 to 6.5 for new sysfs attributes. For older change logs, see previous patch series versions: https://lore.kernel.org/linux-scsi/20230406113252.41211-1-nks@flawful.org/ https://lore.kernel.org/linux-scsi/20230404182428.715140-1-nks@flawful.org/ https://lore.kernel.org/linux-scsi/20230309215516.3800571-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20230124190308.127318-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20230112140412.667308-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20221208105947.2399894-1-niklas.cassel@wdc.com/ Link: https://lore.kernel.org/r/20230511011356.227789-1-nks@flawful.orgSigned-off-by:
-
Niklas Cassel authored
A CDL timeout for policy 0xF is defined as a NCQ error, just with a CDL specific sk/asc/ascq in the sense data. Therefore, the existing code in libata does not need to be modified to handle a policy 0xF CDL timeout. For Command Duration Limits policy 0xD: The device shall complete the command without error with the additional sense code set to DATA CURRENTLY UNAVAILABLE. Since a CDL timeout for policy 0xD is not an error, we cannot use the NCQ Command Error log (10h). Instead, we need to read the Sense Data for Successful NCQ Commands log (0Fh). In the success case, just like in the error case, we cannot simply read a log page from the interrupt handler itself, since reading a log page involves sending a READ LOG DMA EXT or READ LOG EXT command. Therefore, we add a new EH action ATA_EH_GET_SUCCESS_SENSE. When a command completes without error, and when the ATA_SENSE bit is set, this new action is set as pending, and EH is scheduled. This way, similar to the NCQ error case, the log page will be read from EH context. An alternative would have been to add a new kthread or workqueue to handle this. However, extending EH can be done with minimal changes and avoids the need to synchronize a new kthread/workqueue with EH. Co-developed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Damien Le Moal authored
For devices supporting the command duration limits feature, translate the dld field of read and write operation to set the command duration limit index field of the command task file when the duration limit feature is enabled. The function ata_set_tf_cdl() is introduced to do this. For unqueued (non NCQ) read and write operations, this function sets the command duration limit index set as the lower 3 bits of the feature field. For queued NCQ read/write commands, the index is set as the lower 3 bits of the auxiliary field. The flag ATA_QCFLAG_HAS_CDL is introduced to indicate that a command taskfile has a non zero cdl field. Signed-off-by:
Igor Pylypiv <ipylypiv@google.com> Reviewed-by:
-
Damien Le Moal authored
Add support for the ATA feature control sub-page of the control mode page to enable/disable the command duration limits feature using the cdl_ctrl field of the ATA feature control sub-page. Both mode sense and mode select translation are supported. For mode sense, the ata device flag ATA_DFLAG_CDL_ENABLED is used to cache the status of the command duration limits feature. Enabling this feature is done using a SET FEATURES command with a cdl action set to 1 when the page cdl_ctrl field value is 0x2 (T2A and T2B pages supported). If this field is 0, CDL is disabled using the SET FEATURES command with a cdl action set to 0. Since a device CDL and NCQ priority features should not be used simultaneously, ata_mselect_control_ata_feature() returns an error when attempting to enable CDL with the device priority feature enabled. Conversely, the function ata_ncq_prio_enable_store() used to enable the use of the device NCQ priority feature through sysfs is modified to return an error if the device CDL feature is enabled. Signed-off-by:
-
Damien Le Moal authored
Modify ata_scsiop_mode_sense() and ata_msense_control() to support mode sense access to the T2A and T2B sub-pages of the control mode page. ata_msense_control() is modified to support sub-pages. The T2A sub-page is generated using the read descriptors of the command duration limits log page 18h. The T2B sub-page is generated using the write descriptors of the same log page. With the addition of these sub-pages, getting all sub-pages of the control mode page is also supported by increasing the value of ATA_SCSI_RBUF_SIZE from 576B up to 2048B to ensure that all sub-pages fit in the fill buffer. Signed-off-by:
-
Damien Le Moal authored
For a scsi MAINTENANCE_IN/MI_REPORT_SUPPORTED_OPERATION_CODES operation, add the translation of the rwcdlp and cdlp bits for the READ 16 and WRITE 16 commands. If the ATA device does not support command duration limits, these bits are always 0. If the ATA device supports command duration limits, the rwcdlp bit is set to 1 for READ 16 and WRITE 16 and the cdlp bits are set to 0x1 for READ 16 and 0x2 for WRITE 16. These correspond to the T2A mode page containing the read descriptors and to the T2B mode page containing the write descriptors, as defined in SAT-5. Signed-off-by:
-
Damien Le Moal authored
Use the supported capabilities identify device data log page to detect if a device supports the command duration limits feature. For devices supporting this feature, set the device flag ATA_DFLAG_CDL. To support SCSI-ATA translation, retrieve the command duration limits log page 18h and cache this page content using the cdl array added to the ata_device data structure. Signed-off-by:
-
Niklas Cassel authored
Currently, ata_eh_request_sense() unconditionally sets the scsicmd->result to SAM_STAT_CHECK_CONDITION. For Command Duration Limits policy 0xD: The device shall complete the command without error (SAM_STAT_GOOD) with the additional sense code set to DATA CURRENTLY UNAVAILABLE. It is perfectly fine to have sense data for a command that returned completion without error. In order to support for CDL policy 0xD, we have to remove this assumption that having sense data means that the command failed (SAM_STAT_CHECK_CONDITION). Change ata_eh_request_sense() to not set SAM_STAT_CHECK_CONDITION, and instead move the setting of SAM_STAT_CHECK_CONDITION to the single caller that wants SAM_STAT_CHECK_CONDITION set, that way ata_eh_request_sense() can be reused in a follow-up patch that adds support for CDL policy 0xD. The only caller of ata_eh_request_sense() is protected by: if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)), so we can remove this duplicated check from ata_eh_request_sense() itself. Additionally, ata_eh_request_sense() is only called from ata_eh_analyze_tf(), which is only called when iteratating the QCs using ata_qc_for_each_raw(), which does not include the internal tag, so cmd can never be NULL (all non-internal commands have qc->scsicmd set), so remove the !cmd check as well. Reviewed-by:
-
Niklas Cassel authored
There is no need to check if !cmd as this can only happen for ATA internal commands which uses the ATA internal tag (32). Most users of ata_scsi_set_sense() are from _xlat functions that translate a scsicmd to an ATA command. These obviously have a qc->scsicmd. ata_scsi_qc_complete() can also call ata_scsi_set_sense() via ata_gen_passthru_sense() / ata_gen_ata_sense(), called via ata_scsi_qc_complete(). This callback is only called for translated commands, so it also has a qc->scsicmd. ata_eh_analyze_ncq_error(): the NCQ error log can only contain a 0-31 value, so it will never be able to get the ATA internal tag (32). ata_eh_request_sense(): only called by ata_eh_analyze_tf(), which is only called when iteratating the QCs using ata_qc_for_each_raw(), which does not include the internal tag. Since there is no existing call site where cmd can be NULL, remove the !cmd check from ata_scsi_set_sense() and ata_scsi_set_sense_information(). Suggested-by:
-
Niklas Cassel authored
Commands using a duration limit descriptor that has limit policies set to a value other than 0x0 may be failed by the device if one of the limits are exceeded. For such commands, since the failure is the result of the user duration limit configuration and workload, the commands should not be retried and terminated immediately. Furthermore, to allow the user to differentiate these "soft" failures from hard errors due to hardware problem, a different error code than EIO should be returned. There are 2 cases to consider: (1) The failure is due to a limit policy failing the command with a check condition sense key, that is, any limit policy other than 0xD. For this case, scsi_check_sense() is modified to detect failures with the ABORTED COMMAND sense key and the COMMAND TIMEOUT BEFORE PROCESSING or COMMAND TIMEOUT DURING PROCESSING or COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR RECOVERY additional sense code. For these failures, a SUCCESS disposition is returned so that scsi_finish_command() is called to terminate the command. (2) The failure is due to a limit policy set to 0xD, which result in the command being terminated with a GOOD status, COMPLETED sense key, and DATA CURRENTLY UNAVAILABLE additional sense code. To handle this case, the scsi_check_sense() is modified to return a SUCCESS disposition so that scsi_finish_command() is called to terminate the command. In addition, scsi_decide_disposition() has to be modified to see if a command being terminated with GOOD status has sense data. This is as defined in SCSI Primary Commands - 6 (SPC-6), so all according to spec, even if GOOD status commands were not checked before. If scsi_check_sense() detects sense data representing a duration limit, scsi_check_sense() will set the newly introduced SCSI ML byte SCSIML_STAT_DL_TIMEOUT. This SCSI ML byte is checked in scsi_noretry_cmd(), so that a command that failed because of a CDL timeout cannot be retried. The SCSI ML byte is also checked in scsi_result_to_blk_status() to complete the command request with the BLK_STS_DURATION_LIMIT status, which result in the user seeing ETIME errors for the failed commands. Co-developed-by:
-
