Skip to content

L
linux
Switch branch/tag
  1. 03 Mar, 2024 1 commit
    • Linus Torvalds's avatar
      Merge tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 73d35f83
      Linus Torvalds authored 
      Pull x86 fixes from Borislav Petkov:

 - Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
   be used by kexec only

 - Make sure MKTME feature detection happens at an earlier time in the
   boot process so that the physical address size supported by the CPU
   is properly corrected and MTRR masks are programmed properly, leading
   to TDX systems booting without disable_mtrr_cleanup on the cmdline

 - Make sure the different address sizes supported by the CPU are read
   out as early as possible

* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/e820: Don't reserve SETUP_RNG_SEED in e820
  x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
  x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
      73d35f83
  3. 02 Mar, 2024 8 commits
  5. 01 Mar, 2024 26 commits
  7. 29 Feb, 2024 5 commits
    • Filipe Manana's avatar
      btrfs: fix double free of anonymous device after snapshot creation failure · e2b54eaf
      Filipe Manana authored 
      When creating a snapshot we may do a double free of an anonymous device
in case there's an error committing the transaction. The second free may
result in freeing an anonymous device number that was allocated by some
other subsystem in the kernel or another btrfs filesystem.

The steps that lead to this:

1) At ioctl.c:create_snapshot() we allocate an anonymous device number
   and assign it to pending_snapshot->anon_dev;

2) Then we call btrfs_commit_transaction() and end up at
   transaction.c:create_pending_snapshot();

3) There we call btrfs_get_new_fs_root() and pass it the anonymous device
   number stored in pending_snapshot->anon_dev;

4) btrfs_get_new_fs_root() frees that anonymous device number because
   btrfs_lookup_fs_root() returned a root - someone else did a lookup
   of the new root already, which could some task doing backref walking;

5) After that some error happens in the transaction commit path, and at
   ioctl.c:create_snapshot() we jump to the 'fail' label, and after
   that we free again the same anonymous device number, which in the
   meanwhile may have been reallocated somewhere else, because
   pending_snapshot->anon_dev still has the same value as in step 1.

Recently syzbot ran into this and reported the following trace:

  ------------[ cut here ]------------
  ida_free called for id=51 which is not allocated.
  WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525
  Modules linked in:
  CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
  RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525
  Code: 10 42 80 3c 28 (...)
  RSP: 0018:ffffc90015a67300 EFLAGS: 00010246
  RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000
  RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000
  RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4
  R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246
  R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246
  FS:  00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0
  Call Trace:
   <TASK>
   btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346
   create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837
   create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931
   btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404
   create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848
   btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998
   btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044
   __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306
   btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393
   btrfs_ioctl+0xa74/0xd40
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:871 [inline]
   __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857
   do_syscall_64+0xfb/0x240
   entry_SYSCALL_64_after_hwframe+0x6f/0x77
  RIP: 0033:0x7fca3e67dda9
  Code: 28 00 00 00 (...)
  RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9
  RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003
  RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658
   </TASK>

Where we get an explicit message where we attempt to free an anonymous
device number that is not currently allocated. It happens in a different
code path from the example below, at btrfs_get_root_ref(), so this change
may not fix the case triggered by syzbot.

To fix at least the code path from the example above, change
btrfs_get_root_ref() and its callers to receive a dev_t pointer argument
for the anonymous device number, so that in case it frees the number, it
also resets it to 0, so that up in the call chain we don't attempt to do
the double free.

CC: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-btrfs/000000000000f673a1061202f630@google.com/
Fixes: e03ee2fe ("btrfs: do not ASSERT() if the newly created subvolume already got read")
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      e2b54eaf
    • Filipe Manana's avatar
      btrfs: ensure fiemap doesn't race with writes when FIEMAP_FLAG_SYNC is given · 418b0902
      Filipe Manana authored 
      When FIEMAP_FLAG_SYNC is given to fiemap the expectation is that that
are no concurrent writes and we get a stable view of the inode's extent
layout.

When the flag is given we flush all IO (and wait for ordered extents to
complete) and then lock the inode in shared mode, however that leaves open
the possibility that a write might happen right after the flushing and
before locking the inode. So fix this by flushing again after locking the
inode - we leave the initial flushing before locking the inode to avoid
holding the lock and blocking other RO operations while waiting for IO
and ordered extents to complete. The second flushing while holding the
inode's lock will most of the time do nothing or very little since the
time window for new writes to have happened is small.
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      418b0902
    • Filipe Manana's avatar
      btrfs: fix race between ordered extent completion and fiemap · a1a4a9ca
      Filipe Manana authored 
      For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).

However by not locking the target extent range for the whole duration of
the fiemap call we can race with an ordered extent. This happens like
this:

1) The fiemap task finishes processing a file extent item that covers
   the file range [512K, 1M[, and that file extent item is the last item
   in the leaf currently being processed;

2) And ordered extent for the file range [768K, 2M[, in COW mode,
   completes (btrfs_finish_one_ordered()) and the file extent item
   covering the range [512K, 1M[ is trimmed to cover the range
   [512K, 768K[ and then a new file extent item for the range [768K, 2M[
   is inserted in the inode's subvolume tree;

3) The fiemap task calls fiemap_next_leaf_item(), which then calls
   btrfs_next_leaf() to find the next leaf / item. This finds that the
   the next key following the one we previously processed (its type is
   BTRFS_EXTENT_DATA_KEY and its offset is 512K), is the key corresponding
   to the new file extent item inserted by the ordered extent, which has
   a type of BTRFS_EXTENT_DATA_KEY and an offset of 768K;

4) Later the fiemap code ends up at emit_fiemap_extent() and triggers
   the warning:

      if (cache->offset + cache->len > offset) {
               WARN_ON(1);
               return -EINVAL;
      }

   Since we get 1M > 768K, because the previously emitted entry for the
   old extent covering the file range [512K, 1M[ ends at an offset that
   is greater than the new extent's start offset (768K). This makes fiemap
   fail with -EINVAL besides triggering the warning that produces a stack
   trace like the following:

     [1621.677651] ------------[ cut here ]------------
     [1621.677656] WARNING: CPU: 1 PID: 204366 at fs/btrfs/extent_io.c:2492 emit_fiemap_extent+0x84/0x90 [btrfs]
     [1621.677899] Modules linked in: btrfs blake2b_generic (...)
     [1621.677951] CPU: 1 PID: 204366 Comm: pool Not tainted 6.8.0-rc5-btrfs-next-151+ #1
     [1621.677954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
     [1621.677956] RIP: 0010:emit_fiemap_extent+0x84/0x90 [btrfs]
     [1621.678033] Code: 2b 4c 89 63 (...)
     [1621.678035] RSP: 0018:ffffab16089ffd20 EFLAGS: 00010206
     [1621.678037] RAX: 00000000004fa000 RBX: ffffab16089ffe08 RCX: 0000000000009000
     [1621.678039] RDX: 00000000004f9000 RSI: 00000000004f1000 RDI: ffffab16089ffe90
     [1621.678040] RBP: 00000000004f9000 R08: 0000000000001000 R09: 0000000000000000
     [1621.678041] R10: 0000000000000000 R11: 0000000000001000 R12: 0000000041d78000
     [1621.678043] R13: 0000000000001000 R14: 0000000000000000 R15: ffff9434f0b17850
     [1621.678044] FS:  00007fa6e20006c0(0000) GS:ffff943bdfa40000(0000) knlGS:0000000000000000
     [1621.678046] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
     [1621.678048] CR2: 00007fa6b0801000 CR3: 000000012d404002 CR4: 0000000000370ef0
     [1621.678053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
     [1621.678055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
     [1621.678056] Call Trace:
     [1621.678074]  <TASK>
     [1621.678076]  ? __warn+0x80/0x130
     [1621.678082]  ? emit_fiemap_extent+0x84/0x90 [btrfs]
     [1621.678159]  ? report_bug+0x1f4/0x200
     [1621.678164]  ? handle_bug+0x42/0x70
     [1621.678167]  ? exc_invalid_op+0x14/0x70
     [1621.678170]  ? asm_exc_invalid_op+0x16/0x20
     [1621.678178]  ? emit_fiemap_extent+0x84/0x90 [btrfs]
     [1621.678253]  extent_fiemap+0x766/0xa30 [btrfs]
     [1621.678339]  btrfs_fiemap+0x45/0x80 [btrfs]
     [1621.678420]  do_vfs_ioctl+0x1e4/0x870
     [1621.678431]  __x64_sys_ioctl+0x6a/0xc0
     [1621.678434]  do_syscall_64+0x52/0x120
     [1621.678445]  entry_SYSCALL_64_after_hwframe+0x6e/0x76

There's also another case where before calling btrfs_next_leaf() we are
processing a hole or a prealloc extent and we had several delalloc ranges
within that hole or prealloc extent. In that case if the ordered extents
complete before we find the next key, we may end up finding an extent item
with an offset smaller than (or equals to) the offset in cache->offset.

So fix this by changing emit_fiemap_extent() to address these three
scenarios like this:

1) For the first case, steps listed above, adjust the length of the
   previously cached extent so that it does not overlap with the current
   extent, emit the previous one and cache the current file extent item;

2) For the second case where he had a hole or prealloc extent with
   multiple delalloc ranges inside the hole or prealloc extent's range,
   and the current file extent item has an offset that matches the offset
   in the fiemap cache, just discard what we have in the fiemap cache and
   assign the current file extent item to the cache, since it's more up
   to date;

3) For the third case where he had a hole or prealloc extent with
   multiple delalloc ranges inside the hole or prealloc extent's range
   and the offset of the file extent item we just found is smaller than
   what we have in the cache, just skip the current file extent item
   if its range end at or behind the cached extent's end, because we may
   have emitted (to the fiemap user space buffer) delalloc ranges that
   overlap with the current file extent item's range. If the file extent
   item's range goes beyond the end offset of the cached extent, just
   emit the cached extent and cache a subrange of the file extent item,
   that goes from the end offset of the cached extent to the end offset
   of the file extent item.

Dealing with those cases in those ways makes everything consistent by
reflecting the current state of file extent items in the btree and
without emitting extents that have overlapping ranges (which would be
confusing and violating expectations).

This issue could be triggered often with test case generic/561, and was
also hit and reported by Wang Yugui.
Reported-by: default avatarWang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20240223104619.701F.409509F4@e16-tech.com/
Fixes: b0ad381f ("btrfs: fix deadlock with fiemap and extent locking")
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      a1a4a9ca
    • Linus Torvalds's avatar
      Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 87adedeb
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...
      87adedeb
    • Linus Torvalds's avatar
      Merge tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux · d4f76f80
      Linus Torvalds authored 
      Pull Landlock fix from Mickaël Salaün:
 "Fix a potential issue when handling inodes with inconsistent
  properties"

* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix asymmetric private inodes referring
      d4f76f80
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7