1. 17 May, 2016 9 commits
  2. 16 May, 2016 31 commits
    • Daniel Borkmann's avatar
      net: also make sch_handle_egress() drop monitor ready · 7e2c3aea
      Daniel Borkmann authored
      Follow-up for 8a3a4c6e ("net: make sch_handle_ingress() drop
      monitor ready") to also make the egress side drop monitor ready.
      
      Also here only TC_ACT_SHOT is a clear indication that something
      went wrong. Hence don't provide false positives to drop monitors
      such as 'perf record -e skb:kfree_skb ...'.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7e2c3aea
    • Muhammad Falak R Wani's avatar
      net/hsr: Use setup_timer and mod_timer. · 15db6e0d
      Muhammad Falak R Wani authored
      The function setup_timer combines the initialization of a timer with the
      initialization of the timer's function and data fields. The mulitiline
      code for timer initialization is now replaced with function setup_timer.
      
      Also, quoting the mod_timer() function comment:
      -> mod_timer() is a more efficient way to update the expire field of an
         active timer (if the timer is inactive it will be activated).
      
      Use setup_timer() and mod_timer() to setup and arm a timer, making the
      code compact and aid readablity.
      Signed-off-by: default avatarMuhammad Falak R Wani <falakreyaz@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      15db6e0d
    • David S. Miller's avatar
      Merge branch 'qed-next' · a2a658a3
      David S. Miller authored
      Yuval Mintz says:
      
      ====================
      qed: IOV enhncements and fixups
      
      This is a follow-up on the recent patch series that adds SR-IOV support
      to qed. All content here is iov-related fixups [nothing terminal] and
      enhancements.
      
      Please consider applying this series to `net-next'.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2a658a3
    • Yuval Mintz's avatar
      qed: VFs gracefully accept lack of PM · 416cdf06
      Yuval Mintz authored
      VF's probe might log that it has no PM capability in its PCI configuration
      space. As this is a valid configuration, silence such prints.
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      416cdf06
    • Yuval Mintz's avatar
      qed: Allow more than 16 VFs · 83f34bd4
      Yuval Mintz authored
      In multi-function modes, PFs are currently limited to using 16 VFs -
      But that limitation would also currently apply in case there's a single
      PCI function exposed, where no such restriction should have existed.
      
      This lifts the restriction for the default mode; User should be able
      to start the maximum number of VFs as appear in the PCI config space.
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      83f34bd4
    • Manish Chopra's avatar
      qed: Reset link on IOV disable · 079d20a6
      Manish Chopra authored
      PF updates its VFs' bulletin boards with link configurations whenever
      the physical carrier changes or whenever hyper-user explicitly requires
      some setting of the VFs link via the hypervisor's PF.
      
      Since the bulletin board is getting cleaned as part of the IOV disable
      flow on the PF side, re-enabling sriov would lead to a VF that sees the
      carrier as 'down', until an event causing the PF to re-fill the bulletin
      with the link configuration would occur.
      
      To fix this we simply refelect the link state during the flows, giving
      the later VFs a default reflecting the PFs link state.
      Signed-off-by: default avatarManish Chopra <Manish.Chopra@qlogic.com>
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      079d20a6
    • Yuval Mintz's avatar
      qed: Improve VF interrupt reset · b2b897eb
      Yuval Mintz authored
      During FLR flow, need to make sure HW is no longer capable of writing to
      host memory as part of its interrupt mechanisms.
      While we're at it, unify the logic cleaning the driver's status-blocks
      into using a single API function for both PFs and VFs.
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2b897eb
    • Yuval Mintz's avatar
      qed: Correct PF-sanity check · b0409fa0
      Yuval Mintz authored
      Seems like something broke in commit 1408cc1f ("qed: Introduce VFs")
      and the function no longer verifies that the vf is indeed a valid one.
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0409fa0
    • Tariq Toukan's avatar
      net/mlx4_core: Fix access to uninitialized index · 2bb07e15
      Tariq Toukan authored
      Prevent using uninitialized or negative index when handling
      steering entries.
      
      Fixes: b12d93d6 ('mlx4: Add support for promiscuous mode in the new steering model.')
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2bb07e15
    • David S. Miller's avatar
      Merge branch 'for-upstream' of... · 2ffd7e03
      David S. Miller authored
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
      
      Johan Hedberg says:
      
      ====================
      pull request: bluetooth-next 2016-05-14
      
      Here are two more Bluetooth patches for the 4.7 kernel which we wanted
      to get into net-next before the merge window opens. Please let me know
      if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2ffd7e03
    • David S. Miller's avatar
      Merge branch 'w5100-small-changes' · 14d7e487
      David S. Miller authored
      Akinobu Mita says:
      
      ====================
      net: w5100: collection of small changes
      
      This patch series is the collection of relatively small changes for
      w5100 driver which includes a cleanup with no functional change,
      two fixes, and adding a functionality.
      
      * Changes from v1
      - Remove the watchdong_timeo assignment to set default tx timeout,
        suggested by David Miller.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      14d7e487
    • Akinobu Mita's avatar
      net: w5100-spi: add support to specify MAC address by device tree · c3875ca7
      Akinobu Mita authored
      This adds support to specify the MAC address by 'mac-address' or
      'local-mac-address' properties in the device tree.  These are common
      properties for the Ethernet controller.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Mike Sinkovsky <msink@permonline.ru>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c3875ca7
    • Akinobu Mita's avatar
      net: w5100: increase TX timeout period · 7d6da453
      Akinobu Mita authored
      This increases TX timeout period from one second to 5 seconds which is
      the default value if the driver doesn't explicitly set
      net_device->watchdog_timeo.
      
      The one second timeout is too short for W5100 with SPI interface mode
      which doesn't support burst READ/WRITE processing in the SPI transfer.
      If the packet is transmitted while RX packets are being received at a
      very high rate, the TX transmittion work in the workqueue is delayed
      and the watchdog timer is expired.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Mike Sinkovsky <msink@permonline.ru>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d6da453
    • Akinobu Mita's avatar
      net: w5100: fix MAC filtering for W5500 · d41cd5f7
      Akinobu Mita authored
      W5500 has different bit position for MAC filter in Socket n mode
      register from W5100 and W5200.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Mike Sinkovsky <msink@permonline.ru>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d41cd5f7
    • Akinobu Mita's avatar
      net: w5100: remove unused is_w5200() · e9f0cd94
      Akinobu Mita authored
      The is_w5200() function is not used anymore by the commit which adds
      the W5500 support.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Mike Sinkovsky <msink@permonline.ru>
      Cc: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9f0cd94
    • David S. Miller's avatar
      Merge branch 'lxt-cleanups' · b0456b24
      David S. Miller authored
      Sergei Shtylyov says:
      
      ====================
         Here's the set of 2 patches against DaveM's 'net-next.git' repo. We save
      several LoCs on the unneeded local variables....
      
      [1/2] lxt: simplify lxt97[01]_config_intr()
      [2/2] lxt: simplify lxt970_config_init()
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0456b24
    • Sergei Shtylyov's avatar
      lxt: simplify lxt970_config_init() · c8396d84
      Sergei Shtylyov authored
      This function declares the 'err' local variable for no good reason, get rid
      of it.
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c8396d84
    • Sergei Shtylyov's avatar
      lxt: simplify lxt97[01]_config_intr() · 04e6233d
      Sergei Shtylyov authored
      Both these functions declare the 'err' local variables for no good reason,
      get rid of them.
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04e6233d
    • David S. Miller's avatar
      Merge branch 'bpf-blinding' · 485b7778
      David S. Miller authored
      Daniel Borkmann says:
      
      ====================
      BPF updates
      
      This set implements constant blinding for BPF, first couple of
      patches are some preparatory cleanups, followed by the blinding.
      Please see individual patches for details.
      
      Thanks a lot!
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      485b7778
    • Daniel Borkmann's avatar
      bpf, s390: add support for constant blinding · d93a47f7
      Daniel Borkmann authored
      This patch adds recently added constant blinding helpers into the
      s390 eBPF JIT. In the bpf_int_jit_compile() path, requirements are
      to utilize bpf_jit_blind_constants()/bpf_jit_prog_release_other()
      pair for rewriting the program into a blinded one, and to map the
      BPF_REG_AX register to a CPU register. The mapping of BPF_REG_AX
      is at r12 and similarly like in x86 case performs reloading when
      ld_abs/ind is used. When blinding is not used, there's no additional
      overhead in the generated image.
      
      When BPF_REG_AX is used, we don't need to emit skb->data reload when
      helper function changed skb->data, as this will be reloaded later
      on anyway from stack on ld_abs/ind, where skb->data is needed. s390
      allows for this w/o much additional complexity unlike f.e. x86.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d93a47f7
    • Daniel Borkmann's avatar
      bpf, arm64: add support for constant blinding · 26eb042e
      Daniel Borkmann authored
      This patch adds recently added constant blinding helpers into the
      arm64 eBPF JIT. In the bpf_int_jit_compile() path, requirements are
      to utilize bpf_jit_blind_constants()/bpf_jit_prog_release_other()
      pair for rewriting the program into a blinded one, and to map the
      BPF_REG_AX register to a CPU register. The mapping is on x9.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarZi Shen Lim <zlim.lnx@gmail.com>
      Acked-by: default avatarYang Shi <yang.shi@linaro.org>
      Tested-by: default avatarYang Shi <yang.shi@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26eb042e
    • Daniel Borkmann's avatar
      bpf, x86: add support for constant blinding · 959a7579
      Daniel Borkmann authored
      This patch adds recently added constant blinding helpers into the
      x86 eBPF JIT. In the bpf_int_jit_compile() path, requirements are
      to utilize bpf_jit_blind_constants()/bpf_jit_prog_release_other()
      pair for rewriting the program into a blinded one, and to map the
      BPF_REG_AX register to a CPU register. The mapping of BPF_REG_AX
      is at non-callee saved register r10, and thus shared with cached
      skb->data used for ld_abs/ind and not in every program type needed.
      When blinding is not used, there's zero additional overhead in the
      generated image.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      959a7579
    • Daniel Borkmann's avatar
      bpf: add generic constant blinding for use in jits · 4f3446bb
      Daniel Borkmann authored
      This work adds a generic facility for use from eBPF JIT compilers
      that allows for further hardening of JIT generated images through
      blinding constants. In response to the original work on BPF JIT
      spraying published by Keegan McAllister [1], most BPF JITs were
      changed to make images read-only and start at a randomized offset
      in the page, where the rest was filled with trap instructions. We
      have this nowadays in x86, arm, arm64 and s390 JIT compilers.
      Additionally, later work also made eBPF interpreter images read
      only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
      arm, arm64 and s390 archs as well currently. This is done by
      default for mentioned JITs when JITing is enabled. Furthermore,
      we had a generic and configurable constant blinding facility on our
      todo for quite some time now to further make spraying harder, and
      first implementation since around netconf 2016.
      
      We found that for systems where untrusted users can load cBPF/eBPF
      code where JIT is enabled, start offset randomization helps a bit
      to make jumps into crafted payload harder, but in case where larger
      programs that cross page boundary are injected, we again have some
      part of the program opcodes at a page start offset. With improved
      guessing and more reliable payload injection, chances can increase
      to jump into such payload. Elena Reshetova recently wrote a test
      case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
      can leave some more room for payloads. Note that for all this,
      additional bugs in the kernel are still required to make the jump
      (and of course to guess right, to not jump into a trap) and naturally
      the JIT must be enabled, which is disabled by default.
      
      For helping mitigation, the general idea is to provide an option
      bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
      that for cases where JIT should be enabled for performance reasons,
      the generated image can be further hardened with blinding constants
      for unpriviledged users (bpf_jit_harden == 1), with trading off
      performance for these, but not for privileged ones. We also added
      the option of blinding for all users (bpf_jit_harden == 2), which
      is quite helpful for testing f.e. with test_bpf.ko. There are no
      further e.g. hardening levels of bpf_jit_harden switch intended,
      rationale is to have it dead simple to use as on/off. Since this
      functionality would need to be duplicated over and over for JIT
      compilers to use, which are already complex enough, we provide a
      generic eBPF byte-code level based blinding implementation, which is
      then just transparently JITed. JIT compilers need to make only a few
      changes to integrate this facility and can be migrated one by one.
      
      This option is for eBPF JITs and will be used in x86, arm64, s390
      without too much effort, and soon ppc64 JITs, thus that native eBPF
      can be blinded as well as cBPF to eBPF migrations, so that both can
      be covered with a single implementation. The rule for JITs is that
      bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
      and in case blinding is disabled, we follow normally with JITing the
      passed program. In case blinding is enabled and we fail during the
      process of blinding itself, we must return with the interpreter.
      Similarly, in case the JITing process after the blinding failed, we
      return normally to the interpreter with the non-blinded code. Meaning,
      interpreter doesn't change in any way and operates on eBPF code as
      usual. For doing this pre-JIT blinding step, we need to make use of
      a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
      to the JIT and not in any way part of the eBPF architecture. Just like
      in the same way as JITs internally make use of some helper registers
      when emitting code, only that here the helper register is one
      abstraction level higher in eBPF bytecode, but nevertheless in JIT
      phase. That helper register is needed since f.e. manually written
      program can issue loads to all registers of eBPF architecture.
      
      The core concept with the additional register is: blind out all 32
      and 64 bit constants by converting BPF_K based instructions into a
      small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
      is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
      and REG <OP> BPF_REG_AX, so actual operation on the target register
      is translated from BPF_K into BPF_X one that is operating on
      BPF_REG_AX's content. During rewriting phase when blinding, RND is
      newly generated via prandom_u32() for each processed instruction.
      64 bit loads are split into two 32 bit loads to make translation and
      patching not too complex. Only basic thing required by JITs is to
      call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
      pair, and to map BPF_REG_AX into an unused register.
      
      Small bpf_jit_disasm extract from [2] when applied to x86 JIT:
      
      echo 0 > /proc/sys/net/core/bpf_jit_harden
      
        ffffffffa034f5e9 + <x>:
        [...]
        39:   mov    $0xa8909090,%eax
        3e:   mov    $0xa8909090,%eax
        43:   mov    $0xa8ff3148,%eax
        48:   mov    $0xa89081b4,%eax
        4d:   mov    $0xa8900bb0,%eax
        52:   mov    $0xa810e0c1,%eax
        57:   mov    $0xa8908eb4,%eax
        5c:   mov    $0xa89020b0,%eax
        [...]
      
      echo 1 > /proc/sys/net/core/bpf_jit_harden
      
        ffffffffa034f1e5 + <x>:
        [...]
        39:   mov    $0xe1192563,%r10d
        3f:   xor    $0x4989b5f3,%r10d
        46:   mov    %r10d,%eax
        49:   mov    $0xb8296d93,%r10d
        4f:   xor    $0x10b9fd03,%r10d
        56:   mov    %r10d,%eax
        59:   mov    $0x8c381146,%r10d
        5f:   xor    $0x24c7200e,%r10d
        66:   mov    %r10d,%eax
        69:   mov    $0xeb2a830e,%r10d
        6f:   xor    $0x43ba02ba,%r10d
        76:   mov    %r10d,%eax
        79:   mov    $0xd9730af,%r10d
        7f:   xor    $0xa5073b1f,%r10d
        86:   mov    %r10d,%eax
        89:   mov    $0x9a45662b,%r10d
        8f:   xor    $0x325586ea,%r10d
        96:   mov    %r10d,%eax
        [...]
      
      As can be seen, original constants that carry payload are hidden
      when enabled, actual operations are transformed from constant-based
      to register-based ones, making jumps into constants ineffective.
      Above extract/example uses single BPF load instruction over and
      over, but of course all instructions with constants are blinded.
      
      Performance wise, JIT with blinding performs a bit slower than just
      JIT and faster than interpreter case. This is expected, since we
      still get all the performance benefits from JITing and in normal
      use-cases not every single instruction needs to be blinded. Summing
      up all 296 test cases averaged over multiple runs from test_bpf.ko
      suite, interpreter was 55% slower than JIT only and JIT with blinding
      was 8% slower than JIT only. Since there are also some extremes in
      the test suite, I expect for ordinary workloads that the performance
      for the JIT with blinding case is even closer to JIT only case,
      f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
      35 (+ blinding), and 151 (interpreter).
      
      BPF test suite, seccomp test suite, eBPF sample code and various
      bigger networking eBPF programs have been tested with this and were
      running fine. For testing purposes, I also adapted interpreter and
      redirected blinded eBPF image to interpreter and also here all tests
      pass.
      
        [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
        [2] https://github.com/01org/jit-spray-poc-for-ksp/
        [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Reviewed-by: default avatarElena Reshetova <elena.reshetova@intel.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f3446bb
    • Daniel Borkmann's avatar
      bpf: prepare bpf_int_jit_compile/bpf_prog_select_runtime apis · d1c55ab5
      Daniel Borkmann authored
      Since the blinding is strictly only called from inside eBPF JITs,
      we need to change signatures for bpf_int_jit_compile() and
      bpf_prog_select_runtime() first in order to prepare that the
      eBPF program we're dealing with can change underneath. Hence,
      for call sites, we need to return the latest prog. No functional
      change in this patch.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d1c55ab5
    • Daniel Borkmann's avatar
      bpf: add bpf_patch_insn_single helper · c237ee5e
      Daniel Borkmann authored
      Move the functionality to patch instructions out of the verifier
      code and into the core as the new bpf_patch_insn_single() helper
      will be needed later on for blinding as well. No changes in
      functionality.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c237ee5e
    • Daniel Borkmann's avatar
      bpf, x86/arm64: remove useless checks on prog · 93a73d44
      Daniel Borkmann authored
      There is never such a situation, where bpf_int_jit_compile() is
      called with either prog as NULL or len as 0, so the tests are
      unnecessary and confusing as people would just copy them. s390
      doesn't have them, so no change is needed there.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93a73d44
    • Daniel Borkmann's avatar
      bpf: split HAVE_BPF_JIT into cBPF and eBPF variant · 6077776b
      Daniel Borkmann authored
      Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs.
      
      Current cBPF ones:
      
        # git grep -n HAVE_CBPF_JIT arch/
        arch/arm/Kconfig:44:    select HAVE_CBPF_JIT
        arch/mips/Kconfig:18:   select HAVE_CBPF_JIT if !CPU_MICROMIPS
        arch/powerpc/Kconfig:129:       select HAVE_CBPF_JIT
        arch/sparc/Kconfig:35:  select HAVE_CBPF_JIT
      
      Current eBPF ones:
      
        # git grep -n HAVE_EBPF_JIT arch/
        arch/arm64/Kconfig:61:  select HAVE_EBPF_JIT
        arch/s390/Kconfig:126:  select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
        arch/x86/Kconfig:94:    select HAVE_EBPF_JIT                    if X86_64
      
      Later code also needs this facility to check for eBPF JITs.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6077776b
    • Daniel Borkmann's avatar
      bpf: move bpf_jit_enable declaration · c94987e4
      Daniel Borkmann authored
      Move the bpf_jit_enable declaration to the filter.h file where
      most other core code is declared, also since we're going to add
      a second knob there.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c94987e4
    • Daniel Borkmann's avatar
      bpf: minor cleanups in ebpf code · 4936e352
      Daniel Borkmann authored
      Besides others, remove redundant comments where the code is self
      documenting enough, and properly indent various bpf_verifier_ops
      and bpf_prog_type_list declarations. Moreover, remove two exports
      that actually have no module user.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4936e352
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: remove bridge work · 553eb544
      Vivien Didelot authored
      Now that the bridge code defers the switchdev port state setting, there
      is no need to defer the port STP state change within the mv88e6xxx code.
      Thus get rid of the driver's bridge work code.
      
      This also fixes a race condition where the DSA layer assumes that the
      bridge code already set the unbridged port's STP state to Disabled
      before restoring the Forwarding state.
      
      As a consequence, this also fixes the FDB flush for the unbridged port
      which now correctly occurs during the Forwarding to Disabled transition.
      
      Fixes: 0bc05d58 ("switchdev: allow caller to explicitly request attr_set as deferred")
      Reported-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      553eb544
    • David Ahern's avatar
      net: vrf: protect changes to private data with rcu · b0e95ccd
      David Ahern authored
      One cpu can be processing packets which includes using the cached route
      entries in the vrf device's private data and on another cpu the device
      gets deleted which releases the routes and sets the pointers in net_vrf
      to NULL. This results in datapath dereferencing a NULL pointer.
      
      Fix by protecting access to dst's with rcu.
      
      Fixes: 193125db ("net: Introduce VRF device driver")
      Fixes: 35402e31 ("net: Add IPv6 support to VRF device")
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0e95ccd