This patch sets up xps queue mapping on load, so that TX traffic is
steered to the queue whose irqs are being processed by the current cpu.
This helps in avoiding TX lock contention.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides hints to irqbalance to map be2net IRQs to
specific CPU cores. cpumask_set_cpu_local_first() is used, which first
maps IRQs to near NUMA cores; when those cores are exhausted, IRQs are
mapped to far NUMA cores.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 1fb6f159 ("tcp: add tcp_conn_request"),
tcp_syn_flood_action() is no longer used from IPv6.

We can make it static, by moving it above tcp_conn_request()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4_fcoe.c:49:9-10: WARNING: return of 0/1 in function 'cxgb_fcoe_sof_eof_supported' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci

CC: Varun Prakash <varun@chelsio.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not commit the new ops until we finish
all the setup, otherwise we have to NULL it on failure.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petri Gynther says:

====================
net: bcmgenet: multiple Rx queues support

Final patch set to add support for multiple Rx queues:
1. remove priv->int0_mask and priv->int1_mask
2. modify Tx ring int_enable and int_disable vectors
3. simplify bcmgenet_init_dma()
4. tweak init_umac()
5. rework Tx NAPI code
6. rework Rx NAPI code
7. add support for multiple Rx queues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for multiple Rx queues:
1. Add NAPI context per Rx queue
2. Modify Rx interrupt and Rx NAPI code to handle multiple Rx queues
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce new bcmgenet functions to handle the NAPI calls to:
netif_napi_add()
napi_enable()
napi_disable()
netif_napi_del()
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce new bcmgenet functions to handle the NAPI calls to:
netif_napi_add()
napi_enable()
napi_disable()
netif_napi_del()
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use more meaningful variable names int0_enable and int1_enable when
enabling bcmgenet interrupts.

For Rx default queue interrupts, use:
UMAC_IRQ_RXDMA_BDONE | UMAC_IRQ_RXDMA_PDONE

For Tx default queue interrupts, use:
UMAC_IRQ_TXDMA_BDONE | UMAC_IRQ_TXDMA_PDONE
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do the two kcalloc() calls first, before proceeding into Rx/Tx DMA init.
Makes the error case handling much simpler.
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary function parameter priv. Use ring->priv instead.
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unused priv->int0_mask and priv->int1_mask.
Signed-off-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Iyappan Subramanian says:

====================
drivers: net: xgene: Add separate tx completion ring

SGMII based 1GbE and 10GbE interfaces support multiple interrupts.
Adding separate tx completion descriptor ring and associating a dedicated irq for the TX completion.
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>

- Added wrapper functions around napi_add, napi_del, napi_enable and napi_disable
- Moved platform_get_irq function call after reading phy_mode
- Associating the new irq to tx completion for the supported ethernet interfaces
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: some improvements and fixes

We introduce a better algorithm for selecting when and which
users should be subject to link congestion control, plus clean
up some code for that mechanism.
Commit #3 fixes another rare race condition during packet reception.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Despite recent improvements, the establishment of dual parallel
links still has a small glitch where messages can bypass each
other. When the second link in a dual-link configuration is
established, part of the first link's traffic will be steered over
to the new link. Although we do have a mechanism to ensure that
packets sent before and after the establishment of the new link
arrive in sequence to the destination node, this is not enough.
The arriving messages will still be delivered upwards in different
threads, something entailing a risk of message disordering during
the transition phase.

To fix this, we introduce a synchronization mechanism between the
two parallel links, so that traffic arriving on the new link cannot
be added to its input queue until we are guaranteed that all
pre-establishment messages have been delivered on the old, parallel
link.

This problem seems to always have been around, but its occurrence is
so rare that it has not been noticed until recent intensive testing.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the recent changes in message importance handling it becomes
possible to simplify handling of messages and sockets when we
encounter link congestion.

We merge the function tipc_link_cong() into link_schedule_user(),
and simplify the code of the latter. The code should now be
easier to follow, especially regarding return codes and handling
of the message that caused the situation.

In case the scheduling function is unable to pre-allocate a wakeup
message buffer, it now returns -ENOBUFS, which is a more correct
code than the previously used -EHOSTUNREACH.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we only use a single counter; the length of the backlog
queue, to determine whether a message should be accepted to the queue
or not. Each time a message is being sent, the queue length is compared
to a threshold value for the message's importance priority. If the queue
length is beyond this threshold, the message is rejected. This algorithm
implies a risk of starvation of low importance senders during very high
load, because it may take a long time before the backlog queue has
decreased enough to accept a lower level message.

We now eliminate this risk by introducing a counter for each importance
priority. When a message is sent, we check only the queue level for that
particular message's priority. If that is ok, the message can be added
to the backlog, irrespective of the queue level for other priorities.
This way, each level is guaranteed a certain portion of the total
bandwidth, and any risk of starvation is eliminated.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Master change notifications may occur other than when joining or
leaving a bridge, for example when being added to or removed from
a bond or Open vSwitch. In that case, do nothing instead of asking
the switch driver to remove a port from a bridge that it didn't join.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change type from unsigned long to int to fix an issue reported by kbuild robot:
crypto/algif_skcipher.c:596 skcipher_recvmsg_async() warn: unsigned 'used' is
never less than zero.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a node joins a cluster while we are transmitting a fragment
stream over the broadcast link, it's missing the preceding fragments
needed to build a meaningful message. As a result, the node has to
drop it. However, as the fragment message is not acknowledged to
its sender before it's dropped, it accidentally causes link reset
of retransmission failure on the node.
Reported-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Tested-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The irqclass_sub_desc array and enum interruption_class are out of sync
thus /proc/interrupts is broken. Remove IRQIO_CLW.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the declaration for external variables to sctp.h file avoiding
to repeatedly declare them with extern keyword.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ss should display ipv4 mapped request sockets like this :

tcp    SYN-RECV   0      0  ::ffff:192.168.0.1:8080   ::ffff:192.0.2.1:35261

and not like this :

tcp    SYN-RECV   0      0  192.168.0.1:8080   192.0.2.1:35261

We should init ireq->ireq_family based on listener sk_family,
not the actual protocol carried by SYN packet.

This means we can set ireq_family in inet_reqsk_alloc()

Fixes: 3f66b083 ("inet: introduce ireq_family")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The original comment was not really informative or funny
as well as sexist. Replace it with a better explanation of
why the driver does stop and what the impacts are.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We now have K_VLANT, K_VLANP and K_VLANTPID. Clean them up into more
descriptive token, namely K_VLAN_TCI, K_VLAN_AVAIL and K_VLAN_TPID.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: listener refactor part 16

A CONFIG_PROVE_RCU=y build revealed an RCU splat I had to fix.

I added const qualifiers to various md5 methods, as I expect
to call them on behalf of request sock traffic even if
the listener socket is not locked. This seems ok, but adding
const makes the contract clearer. Note a good reduction
of code size thanks to request/establish sockets convergence.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With request socks convergence, we no longer need
different lookup methods. A request socket can
use generic lookup function.

Add const qualifier to 2nd tcp_v[46]_md5_lookup() parameter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since request and established sockets now have same base,
there is no need to pass two pointers to tcp_v4_md5_hash_skb()
or tcp_v6_md5_hash_skb()

Also add a const qualifier to their struct tcp_md5sig_key argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is guaranteed that both tcp_v4_rcv() and tcp_v6_rcv()
run from rcu read locked sections :

ip_local_deliver_finish() and ip6_input_finish() both
use rcu_read_lock()

Also align tcp_v6_inbound_md5_hash() on tcp_v4_inbound_md5_hash()
by returning a boolean.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While timer handler effectively runs a rcu read locked section,
there is no explicit rcu_read_lock()/rcu_read_unlock() annotations
and lockdep can be confused here :

net/ipv4/tcp_ipv4.c-906-        /* caller either holds rcu_read_lock() or socket lock */
net/ipv4/tcp_ipv4.c:907:        md5sig = rcu_dereference_check(tp->md5sig_info,
net/ipv4/tcp_ipv4.c-908-                                       sock_owned_by_user(sk) ||
net/ipv4/tcp_ipv4.c-909-                                       lockdep_is_held(&sk->sk_lock.slock));

Let's explicitely acquire rcu_read_lock() in tcp_make_synack()

Before commit fa76ce73 ("inet: get rid of central tcp/dccp listener
timer"), we were holding listener lock so lockdep was happy.

Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Eric DUmazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
rhashtable updates on top of Herbert's work

Patch 1 is a bugfix for an RCU splash I encountered while testing.
Patch 2 & 3 are pure cleanups. Patch 4 disables automatic shrinking
by default as discussed in previous thread. Patch 5 removes some
rhashtable internal knowledge from nft_hash and fixes another RCU
splash.

I've pushed various rhashtable tests (Netlink, nft) together with a
Makefile to a git tree [0] for easier stress testing.

[0] https://github.com/tgraf/rhashtable
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable_destroy() variant which stops rehashes, iterates over
the table and calls a callback to release resources.

Avoids need for nft_hash to embed rhashtable internals and allows to
get rid of the being_destroyed flag. It also saves a 2nd mutex
lock upon destruction.

Also fixes an RCU lockdep splash on nft set destruction due to
calling rht_for_each_entry_safe() without holding bucket locks.
Open code this loop as we need know that no mutations may occur in
parallel.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a new bool automatic_shrinking to require the
user to explicitly opt-in to automatic shrinking of tables.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>