Ensure valid base address during IRQ init.  Fixes compiler warning
about potential use of uninitialized variable.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>

To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove old unused defines for OMAP_32KSYNCT_BASE
Signed-off-by: Tony Lindgren <tony@atomide.com>

The only usage of _toggle_gpio_edge_triggering is in
an #ifdef CONFIG_ARCH_OMAP1 block, so only provide it if
CONFIG_ARCH_OMAP1 is defined, too.

This fixes a compiler warning:

	arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used

when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

asic3 also needs tmio_core or otherwise will fail to build.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: update multi-touch protocol documentation
  Input: add the ABS_MT_PRESSURE event
  Input: winbond-cir - remove dmesg spam
  Input: lifebook - add another Lifebook DMI signature
  Input: ad7879 - support auxiliary GPIOs via gpiolib

After memory pressure has forced it to dip into the reserves, 2.6.32's
5f8dcc21 "page-allocator: split per-cpu
list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE
pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves.

Fix that in the most straightforward way (which, considering the overheads
of alternative approaches, is Mel's preference): the right migratetype is
already in page_private(page), but free_pcppages_bulk() wasn't using it.

How did this bug show up?  As a 20% slowdown in my tmpfs loop kbuild
swapping tests, on PowerMac G5 with SLUB allocator.  Bisecting to that
commit was easy, but explaining the magnitude of the slowdown not easy.

The same effect appears, but much less markedly, with SLAB, and even
less markedly on other machines (the PowerMac divides into fewer zones
than x86, I think that may be a factor).  We guess that lumpy reclaim
of short-lived high-order pages is implicated in some way, and probably
this bug has been tickling a poor decision somewhere in page reclaim.

But instrumentation hasn't told me much, I've run out of time and
imagination to determine exactly what's going on, and shouldn't hold up
the fix any longer: it's valid, and might even fix other misbehaviours.
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check total number of devices when removing missing
  Btrfs: check return value of open_bdev_exclusive properly
  Btrfs: do not mark the chunk as readonly if in degraded mode
  Btrfs: run orphan cleanup on default fs root
  Btrfs: fix a memory leak in btrfs_init_acl
  Btrfs: Use correct values when updating inode i_size on fallocate
  Btrfs: remove tree_search() in extent_map.c
  Btrfs: Add mount -o compress-force

Here are the sparc bits to remove TIF_ABI_PENDING now that
set_personality() is called at the appropriate place in exec.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that the previous commit made it possible to do the personality
setting at the point of no return, we do just that for ELF binaries.
And suddenly all the reasons for that insane TIF_ABI_PENDING bit go
away, and we can just make SET_PERSONALITY() just do the obvious thing
for a 32-bit compat process.

Everything becomes much more straightforward this way.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'flush_old_exec()' is the point of no return when doing an execve(), and
it is pretty badly misnamed.  It doesn't just flush the old executable
environment, it also starts up the new one.

Which is very inconvenient for things like setting up the new
personality, because we want the new personality to affect the starting
of the new environment, but at the same time we do _not_ want the new
personality to take effect if flushing the old one fails.

As a result, the x86-64 '32-bit' personality is actually done using this
insane "I'm going to change the ABI, but I haven't done it yet" bit
(TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the
personality, but just the "pending" bit, so that "flush_thread()" can do
the actual personality magic.

This patch in no way changes any of that insanity, but it does split the
'flush_old_exec()' function up into a preparatory part that can fail
(still called flush_old_exec()), and a new part that will actually set
up the new exec environment (setup_new_exec()).  All callers are changed
to trivially comply with the new world order.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch documents a new ABS_MT parameter and adds further text to
clarify some points around the MT protocol.
Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com>
Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

For pressure-based multi-touch devices, a direct way to send sensor
intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE
event to the MT protocol.
Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com>
Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

I missed converting one dev_info call to deb_dbg before submitting the driver.
Without this change, a message will be printed to dmesg for each button press
if a RC6 remote is used.
Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: stable <stable@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Fix failure exit in ipathfs
  fix oops in fs/9p late mount failure
  fix leak in romfs_fill_super()
  get rid of pointless checks after simple_pin_fs()
  Fix failure exits in bfs_fill_super()
  fix affs parse_options()
  Fix remount races with symlink handling in affs
  Fix a leak in affs_fill_super()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: remove IOH range fetching
  PCI: fix nested spinlock hang in aer_inject

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Update mach-types
  [ARM] orion5x: D-link DNS-323 rev. B1 power-off
  [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2
  [ARM] pxa: fix irq suspend/resume for pxa25x
  [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
  [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
  [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
  [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

If you have a disk failure in RAID1 and then add a new disk to the
array, and then try to remove the missing volume, it will fail.  The
reason is the sanity check only looks at the total number of rw devices,
which is just 2 because we have 2 good disks and 1 bad one.  Instead
check the total number of devices in the array to make sure we can
actually remove the device.  Tested this with a failed disk setup and
with this test we can now run

btrfs-vol -r missing /mount/point

and it works fine.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Hit this problem while testing RAID1 failure stuff.  open_bdev_exclusive
returns ERR_PTR(), not NULL.  So change the return value properly.  This
is important if you accidently specify a device that doesn't exist when
trying to add a new device to an array, you will panic the box
dereferencing bdev.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

If a RAID setup has chunks that span multiple disks, and one of those
disks has failed, btrfs_chunk_readonly will return 1 since one of the
disks in that chunk's stripes is dead and therefore not writeable.  So
instead if we are in degraded mode, return 0 so we can go ahead and
allocate stuff.  Without this patch all of the block groups in a RAID1
setup will end up read-only, which will mean we can't add new disks to
the array since we won't be able to make allocations.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch revert's commit

6c090a11

Since it introduces this problem where we can run orphan cleanup on a
volume that can have orphan entries re-added.  Instead of my original
fix, Yan Zheng pointed out that we can just revert my original fix and
then run the orphan cleanup in open_ctree after we look up the fs_root.
I have tested this with all the tests that gave me problems and this
patch fixes both problems.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

In btrfs_init_acl() cloned acl is not released
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Date:   Wed Jan 20 12:57:53 2010 +0530

    Btrfs: Use correct values when updating inode i_size on fallocate

    Even though we allocate more, we should be updating inode i_size
    as per the arguments passed
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch removes tree_search() in extent_map.c because it is not called by
anything.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The default btrfs mount -o compress mode will quickly back off
compressing a file if it notices that compression does not reduce the
size of the data being written.  This can save considerable CPU because
all future writes to the file go through uncompressed.

But some files are both very large and have mixed data stored in
them.  In that case, we want to add the ability to always try
compressing data before writing it.

This commit adds mount -o compress-force.  A later commit will add
a new inode flag that does the same thing.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
  MIPS: PowerTV: Streamline access to platform device registers
  MIPS: Fix vmlinuz build for 32bit-only math shells
  MIPS: Add support of LZO-compressed kernels

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: fix volume creation input checking

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix crashes with TSB43AB23 on 64bit systems
  firewire: core: fix use-after-free regression in FCP handler
  firewire: cdev: add_descriptor documentation fix
  firewire: core: add_descriptor size check

Turned out to cause trouble on single IOH machines, and is superceded by
_CRS on multi-IOH machines with production BIOSes.
Signed-off-by: Jeff Garrett <jeff@jgarrett.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

There are many many ways one can capitalize "Lifebook B Series"...
Signed-off-by: Jon Dodgson <crayzeejon@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The MIPS processor is limited to 64 external interrupt sources. Using a
greater number without IRQ sharing requires reading platform-specific
registers. On such platforms, reading the IntCtl register to determine
which interrupt corresponds to a timer interrupt will not work.

On MIPSR2 systems there is a solution - the TI bit in the Cause register,
specifically indicates that a timer interrupt has occured. This patch uses
that bit to detect interrupts for MIPSR2 processors, which may be expected
to work regardless of how the timer interrupt may be routed in the hardware.

Signed-off-by: David VomLehn (dvomlehn@cisco.com)
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/804/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pre-compute addresses for the basic ASIC registers. This speeds up access
and allows memory for unused configurations to be freed. In addition,
uninitialized register addresses will be returned as NULL to catch bad
usage quickly.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/806/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

POSIX requires $((<expression>)) arithmetic in sh only to have long
arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but
the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit.

I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is
0xffffffff94100000, and for an example 4MiB kernel
VMLINUZ_LOAD_ADDRESS is made out to be:
----
alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))'
ffffffff94500000
alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))'
80000000003fffff
----

The former is obviously correct whilst the later breaks things royally.

Fortunately working with only the lower 32bit's works for both bash and
dash:
----
$ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))'
94500000
$ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))'
94500000
----

So, we can split the original 64bit string to two parts, and only
calculate the low 32bit part, which is big enough (1GiB kernel sizes
anyone?) for a normal Linux kernel image file, now, we calculate the
VMLINUZ_LOAD_ADDRESS like this:

1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix
2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE

This patch fixes vmlinuz kernel builds on systems where only a
32bit-only math shell is available.

Patch Changelog:
  Version 2
    - simplified method by using 'expr' for 'substr' and making it work
	with dash once again
  Version 1
    - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error
        of "make clean"
    - Consider more cases of the VMLINUX_LOAD_ADDRESS
  Version 0
    - initial release
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Acked-by: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/861/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The necessary changes to the x86 Kconfig and boot/compressed to allow the
use of this new compression method.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Patchwork: http://patchwork.linux-mips.org/patch/857/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree
  [SCSI] zfcp: Set hardware timeout as requested by BSG request.
  [SCSI] zfcp: Introduce bsg_timeout callback.
  [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout
  [SCSI] zfcp: add missing compat ptr conversion
  [SCSI] zfcp: Fix linebreak in hba trace
  [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request
  [SCSI] qla2xxx: Update version number to 8.03.01-k10.
  [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure.
  [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment.
  [SCSI] qla2xxx: Correct FCP2 recovery handling.
  [SCSI] scsi_lib: Fix bug in completion of bidi commands
  [SCSI] mptsas: Fix issue with chain pools allocation on katmai
  [SCSI] aacraid: fix File System going into read-only mode
  [SCSI] lpfc: fix file permissions

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix single stepped svcs with TRACE_IRQFLAGS=y
  [S390] zcrypt: Do not remove coprocessor for error 8/72
  [S390] sclp_vt220: set initial terminal window size
  [S390] use set_current_state in sigsuspend
  [S390] irqflags: add missing types.h include
  [S390] dasd: fix possible NULL pointer errors