- 06 Jan, 2017 12 commits
-
-
Johan Hovold authored
commit 6774d5f5 upstream. Kill urbs and disable read before returning from open on failure to retrieve the line state. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Giuseppe Lippolis authored
commit d8a12b71 upstream. Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit 5b09eff0 upstream. This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Filipe Manana authored
commit 8d9eddad upstream. We were setting the qgroup_rescan_running flag to true only after the rescan worker started (which is a task run by a queue). So if a user space task starts a rescan and immediately after asks to wait for the rescan worker to finish, this second call might happen before the rescan worker task starts running, in which case the rescan wait ioctl returns immediatley, not waiting for the rescan worker to finish. This was making the fstest btrfs/022 fail very often. Fixes: d2c609b8 (btrfs: properly track when rescan worker is running) Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
commit f177d739 upstream. We can not simply use the owner field from an extent buffer's header to get the id of the respective tree when the extent buffer is from a relocation tree. When we create the root for a relocation tree we leave (on purpose) the owner field with the same value as the subvolume's tree root (we do this at ctree.c:btrfs_copy_root()). So we must ignore extent buffers from relocation trees, which have the BTRFS_HEADER_FLAG_RELOC flag set, because otherwise we will always consider the extent buffer as not being the root of the tree (the root of original subvolume tree is always different from the root of the respective relocation tree). This lead to assertion failures when running with the integrity checker enabled (CONFIG_BTRFS_FS_CHECK_INTEGRITY=y) such as the following: [ 643.393409] BTRFS critical (device sdg): corrupt leaf, non-root leaf's nritems is 0: block=38506496, root=260, slot=0 [ 643.397609] BTRFS info (device sdg): leaf 38506496 total ptrs 0 free space 3995 [ 643.407075] assertion failed: 0, file: fs/btrfs/disk-io.c, line: 4078 [ 643.408425] ------------[ cut here ]------------ [ 643.409112] kernel BUG at fs/btrfs/ctree.h:3419! [ 643.409773] invalid opcode: 0000 [#1] PREEMPT SMP [ 643.410447] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq ppdev psmouse acpi_cpufreq parport_pc evdev parport tpm_tis tpm_tis_core pcspkr serio_raw i2c_piix4 sg tpm i2c_core button processor loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod virtio e1000 floppy [ 643.414356] CPU: 11 PID: 32726 Comm: btrfs Not tainted 4.8.0-rc8-btrfs-next-35+ #1 [ 643.414356] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 643.414356] task: ffff880145e95b00 task.stack: ffff88014826c000 [ 643.414356] RIP: 0010:[<ffffffffa0352759>] [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs] [ 643.414356] RSP: 0018:ffff88014826fa28 EFLAGS: 00010292 [ 643.414356] RAX: 0000000000000039 RBX: ffff88014e2d7c38 RCX: 0000000000000001 [ 643.414356] RDX: ffff88023f4d2f58 RSI: ffffffff81806c63 RDI: 00000000ffffffff [ 643.414356] RBP: ffff88014826fa28 R08: 0000000000000001 R09: 0000000000000000 [ 643.414356] R10: ffff88014826f918 R11: ffffffff82f3c5ed R12: ffff880172910000 [ 643.414356] R13: ffff880233992230 R14: ffff8801a68a3310 R15: fffffffffffffff8 [ 643.414356] FS: 00007f9ca305e8c0(0000) GS:ffff88023f4c0000(0000) knlGS:0000000000000000 [ 643.414356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 643.414356] CR2: 00007f9ca3071000 CR3: 000000015d01b000 CR4: 00000000000006e0 [ 643.414356] Stack: [ 643.414356] ffff88014826fa50 ffffffffa02d655a 000000000000000a ffff88014e2d7c38 [ 643.414356] 0000000000000000 ffff88014826faa8 ffffffffa02b72f3 ffff88014826fab8 [ 643.414356] 00ffffffa03228e4 0000000000000000 0000000000000000 ffff8801bbd4e000 [ 643.414356] Call Trace: [ 643.414356] [<ffffffffa02d655a>] btrfs_mark_buffer_dirty+0xdf/0xe5 [btrfs] [ 643.414356] [<ffffffffa02b72f3>] btrfs_copy_root+0x18a/0x1d1 [btrfs] [ 643.414356] [<ffffffffa0322921>] create_reloc_root+0x72/0x1ba [btrfs] [ 643.414356] [<ffffffffa03267c2>] btrfs_init_reloc_root+0x7b/0xa7 [btrfs] [ 643.414356] [<ffffffffa02d9e44>] record_root_in_trans+0xdf/0xed [btrfs] [ 643.414356] [<ffffffffa02db04e>] btrfs_record_root_in_trans+0x50/0x6a [btrfs] [ 643.414356] [<ffffffffa030ad2b>] create_subvol+0x472/0x773 [btrfs] [ 643.414356] [<ffffffffa030b406>] btrfs_mksubvol+0x3da/0x463 [btrfs] [ 643.414356] [<ffffffffa030b406>] ? btrfs_mksubvol+0x3da/0x463 [btrfs] [ 643.414356] [<ffffffff810781ac>] ? preempt_count_add+0x65/0x68 [ 643.414356] [<ffffffff811a6e97>] ? __mnt_want_write+0x62/0x77 [ 643.414356] [<ffffffffa030b55d>] btrfs_ioctl_snap_create_transid+0xce/0x187 [btrfs] [ 643.414356] [<ffffffffa030b67d>] btrfs_ioctl_snap_create+0x67/0x81 [btrfs] [ 643.414356] [<ffffffffa030ecfd>] btrfs_ioctl+0x508/0x20dd [btrfs] [ 643.414356] [<ffffffff81293e39>] ? __this_cpu_preempt_check+0x13/0x15 [ 643.414356] [<ffffffff81155eca>] ? handle_mm_fault+0x976/0x9ab [ 643.414356] [<ffffffff81091300>] ? arch_local_irq_save+0x9/0xc [ 643.414356] [<ffffffff8119a2b0>] vfs_ioctl+0x18/0x34 [ 643.414356] [<ffffffff8119a8e8>] do_vfs_ioctl+0x581/0x600 [ 643.414356] [<ffffffff814b9552>] ? entry_SYSCALL_64_fastpath+0x5/0xa8 [ 643.414356] [<ffffffff81093fe9>] ? trace_hardirqs_on_caller+0x17b/0x197 [ 643.414356] [<ffffffff8119a9be>] SyS_ioctl+0x57/0x79 [ 643.414356] [<ffffffff814b9565>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 643.414356] [<ffffffff81091b08>] ? trace_hardirqs_off_caller+0x3f/0xaa [ 643.414356] Code: 89 83 88 00 00 00 31 c0 5b 41 5c 41 5d 5d c3 55 89 f1 48 c7 c2 98 bc 35 a0 48 89 fe 48 c7 c7 05 be 35 a0 48 89 e5 e8 13 46 dd e0 <0f> 0b 55 89 f1 48 c7 c2 9f d3 35 a0 48 89 fe 48 c7 c7 7a d5 35 [ 643.414356] RIP [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs] [ 643.414356] RSP <ffff88014826fa28> [ 643.468267] ---[ end trace 6a1b3fb1a9d7d6e3 ]--- This can be easily reproduced by running xfstests with the integrity checker enabled. Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item) Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
David Sterba authored
commit ed0df618 upstream. The balance status item contains currently known filter values, but the stripes filter was unintentionally not among them. This would mean, that interrupted and automatically restarted balance does not apply the stripe filters. Fixes: dee32d0aSigned-off-by:
-
Filipe Manana authored
commit 054570a1 upstream. During relocation of a data block group we create a relocation tree for each fs/subvol tree by making a snapshot of each tree using btrfs_copy_root() and the tree's commit root, and then setting the last snapshot field for the fs/subvol tree's root to the value of the current transaction id minus 1. However this can lead to relocation later dropping references that it did not create if we have qgroups enabled, leaving the filesystem in an inconsistent state that keeps aborting transactions. Lets consider the following example to explain the problem, which requires qgroups to be enabled. We are relocating data block group Y, we have a subvolume with id 258 that has a root at level 1, that subvolume is used to store directory entries for snapshots and we are currently at transaction 3404. When committing transaction 3404, we have a pending snapshot and therefore we call btrfs_run_delayed_items() at transaction.c:create_pending_snapshot() in order to create its dentry at subvolume 258. This results in COWing leaf A from root 258 in order to add the dentry. Note that leaf A also contains file extent items referring to extents from some other block group X (we are currently relocating block group Y). Later on, still at create_pending_snapshot() we call qgroup_account_snapshot(), which switches the commit root for root 258 when it calls switch_commit_roots(), so now the COWed version of leaf A, lets call it leaf A', is accessible from the commit root of tree 258. At the end of qgroup_account_snapshot(), we call record_root_in_trans() with 258 as its argument, which results in btrfs_init_reloc_root() being called, which in turn calls relocation.c:create_reloc_root() in order to create a relocation tree associated to root 258, which results in assigning the value of 3403 (which is the current transaction id minus 1 = 3404 - 1) to the last_snapshot field of root 258. When creating the relocation tree root at ctree.c:btrfs_copy_root() we add a shared reference for leaf A', corresponding to the relocation tree's root, when we call btrfs_inc_ref() against the COWed root (a copy of the commit root from tree 258), which is at level 1. So at this point leaf A' has 2 references, one normal reference corresponding to root 258 and one shared reference corresponding to the root of the relocation tree. Transaction 3404 finishes its commit and transaction 3405 is started by relocation when calling merge_reloc_root() for the relocation tree associated to root 258. In the meanwhile leaf A' is COWed again, in response to some filesystem operation, when we are still at transaction 3405. However when we COW leaf A', at ctree.c:update_ref_for_cow(), we call btrfs_block_can_be_shared() in order to figure out if other trees refer to the leaf and if any such trees exists, add a full back reference to leaf A' - but btrfs_block_can_be_shared() incorrectly returns false because the following condition is false: btrfs_header_generation(buf) <= btrfs_root_last_snapshot(&root->root_item) which evaluates to 3404 <= 3403. So after leaf A' is COWed, it stays with only one reference, corresponding to the shared reference we created when we called btrfs_copy_root() to create the relocation tree's root and btrfs_inc_ref() ends up not being called for leaf A' nor we end up setting the flag BTRFS_BLOCK_FLAG_FULL_BACKREF in leaf A'. This results in not adding shared references for the extents from block group X that leaf A' refers to with its file extent items. Later, after merging the relocation root we do a call to to btrfs_drop_snapshot() in order to delete the relocation tree. This ends up calling do_walk_down() when path->slots[1] points to leaf A', which results in calling btrfs_lookup_extent_info() to get the number of references for leaf A', which is 1 at this time (only the shared reference exists) and this value is stored at wc->refs[0]. After this walk_up_proc() is called when wc->level is 0 and path->nodes[0] corresponds to leaf A'. Because the current level is 0 and wc->refs[0] is 1, it does call btrfs_dec_ref() against leaf A', which results in removing the single references that the extents from block group X have which are associated to root 258 - the expectation was to have each of these extents with 2 references - one reference for root 258 and one shared reference related to the root of the relocation tree, and so we would drop only the shared reference (because leaf A' was supposed to have the flag BTRFS_BLOCK_FLAG_FULL_BACKREF set). This leaves the filesystem in an inconsistent state as we now have file extent items in a subvolume tree that point to extents from block group X without references in the extent tree. So later on when we try to decrement the references for these extents, for example due to a file unlink operation, truncate operation or overwriting ranges of a file, we fail because the expected references do not exist in the extent tree. This leads to warnings and transaction aborts like the following: [ 588.965795] ------------[ cut here ]------------ [ 588.965815] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:1625 lookup_inline_extent_backref+0x432/0x5b0 [btrfs] [ 588.965816] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg [ 588.965831] CPU: 2 PID: 2479 Comm: kworker/u8:7 Not tainted 4.7.3-3-default-fdm+ #1 [ 588.965832] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 588.965844] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs] [ 588.965845] 0000000000000000 ffff8802263bfa28 ffffffff813af542 0000000000000000 [ 588.965847] 0000000000000000 ffff8802263bfa68 ffffffff81081e8b 0000065900000000 [ 588.965848] ffff8801db2af000 000000012bbe2000 0000000000000000 ffff880215703b48 [ 588.965849] Call Trace: [ 588.965852] [<ffffffff813af542>] dump_stack+0x63/0x81 [ 588.965854] [<ffffffff81081e8b>] __warn+0xcb/0xf0 [ 588.965855] [<ffffffff81081f7d>] warn_slowpath_null+0x1d/0x20 [ 588.965863] [<ffffffffa0175042>] lookup_inline_extent_backref+0x432/0x5b0 [btrfs] [ 588.965865] [<ffffffff81143220>] ? trace_clock_local+0x10/0x30 [ 588.965867] [<ffffffff8114c5df>] ? rb_reserve_next_event+0x6f/0x460 [ 588.965875] [<ffffffffa0175215>] insert_inline_extent_backref+0x55/0xd0 [btrfs] [ 588.965882] [<ffffffffa017531f>] __btrfs_inc_extent_ref.isra.55+0x8f/0x240 [btrfs] [ 588.965890] [<ffffffffa017acea>] __btrfs_run_delayed_refs+0x74a/0x1260 [btrfs] [ 588.965892] [<ffffffff810cb046>] ? cpuacct_charge+0x86/0xa0 [ 588.965900] [<ffffffffa017e74f>] btrfs_run_delayed_refs+0x9f/0x2c0 [btrfs] [ 588.965908] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs] [ 588.965918] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs] [ 588.965928] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs] [ 588.965930] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0 [ 588.965931] [<ffffffff8109b658>] worker_thread+0x48/0x4e0 [ 588.965932] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0 [ 588.965934] [<ffffffff810a1659>] kthread+0xc9/0xe0 [ 588.965936] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40 [ 588.965937] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170 [ 588.965938] ---[ end trace 34e5232c933a1749 ]--- [ 588.966187] ------------[ cut here ]------------ [ 588.966196] WARNING: CPU: 2 PID: 2479 at fs/btrfs/extent-tree.c:2966 btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs] [ 588.966196] BTRFS: Transaction aborted (error -5) [ 588.966197] Modules linked in: af_packet iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ppdev acpi_cpufreq button tpm_tis e1000 i2c_piix4 pcspkr parport_pc parport tpm qemu_fw_cfg joydev btrfs xor raid6_pq sr_mod cdrom ata_generic virtio_scsi ata_piix virtio_pci bochs_drm virtio_ring drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio ttm serio_raw drm floppy sg [ 588.966206] CPU: 2 PID: 2479 Comm: kworker/u8:7 Tainted: G W 4.7.3-3-default-fdm+ #1 [ 588.966207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 588.966217] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs] [ 588.966217] 0000000000000000 ffff8802263bfc98 ffffffff813af542 ffff8802263bfce8 [ 588.966219] 0000000000000000 ffff8802263bfcd8 ffffffff81081e8b 00000b96345ee000 [ 588.966220] ffffffffa021ae1c ffff880215703b48 00000000000005fe ffff8802345ee000 [ 588.966221] Call Trace: [ 588.966223] [<ffffffff813af542>] dump_stack+0x63/0x81 [ 588.966224] [<ffffffff81081e8b>] __warn+0xcb/0xf0 [ 588.966225] [<ffffffff81081eff>] warn_slowpath_fmt+0x4f/0x60 [ 588.966233] [<ffffffffa017e93c>] btrfs_run_delayed_refs+0x28c/0x2c0 [btrfs] [ 588.966241] [<ffffffffa017ea04>] delayed_ref_async_start+0x94/0xb0 [btrfs] [ 588.966250] [<ffffffffa01c799a>] btrfs_scrubparity_helper+0xca/0x350 [btrfs] [ 588.966259] [<ffffffffa01c7c5e>] btrfs_extent_refs_helper+0xe/0x10 [btrfs] [ 588.966260] [<ffffffff8109b323>] process_one_work+0x1f3/0x4e0 [ 588.966261] [<ffffffff8109b658>] worker_thread+0x48/0x4e0 [ 588.966263] [<ffffffff8109b610>] ? process_one_work+0x4e0/0x4e0 [ 588.966264] [<ffffffff810a1659>] kthread+0xc9/0xe0 [ 588.966265] [<ffffffff816f2f1f>] ret_from_fork+0x1f/0x40 [ 588.966267] [<ffffffff810a1590>] ? kthread_worker_fn+0x170/0x170 [ 588.966268] ---[ end trace 34e5232c933a174a ]--- [ 588.966269] BTRFS: error (device sda2) in btrfs_run_delayed_refs:2966: errno=-5 IO failure [ 588.966270] BTRFS info (device sda2): forced readonly This was happening often on openSUSE and SLE systems using btrfs as the root filesystem (with its default layout where multiple subvolumes are used) where balance happens in the background triggered by a cron job and snapshots are automatically created before/after package installations, upgrades and removals. The issue could be triggered simply by running the following loop on the first system boot post installation: while true; do zypper -n in nfs-kernel-server zypper -n rm nfs-kernel-server done (If we were fast enough and made that loop before the cron job triggered a balance operation and the balance finished) So fix by setting the last_snapshot field of the root to the value of the generation of its commit root. Like this btrfs_block_can_be_shared() behaves correctly for the case where the relocation root is created during a transaction commit and for the case where it's created before a transaction commit. Fixes: 6426c7ad (btrfs: qgroup: Fix qgroup accounting when creating snapshot) Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Robbie Ko authored
commit 2a7bf53f upstream. If a log tree has a layout like the following: leaf N: ... item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8 dir log end 1275809046 leaf N + 1: item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8 dir log end 18446744073709551615 ... When we pass the value 1275809046 + 1 as the parameter start_ret to the function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we end up with path->slots[0] having the value 239 (points to the last item of leaf N, item 240). Because the dir log item in that position has an offset value smaller than *start_ret (1275809046 + 1) we need to move on to the next leaf, however the logic for that is wrong since it compares the current slot to the number of items in the leaf, which is smaller and therefore we don't lookup for the next leaf but instead we set the slot to point to an item that does not exist, at slot 240, and we later operate on that slot which has unexpected content or in the worst case can result in an invalid memory access (accessing beyond the last page of leaf N's extent buffer). So fix the logic that checks when we need to lookup at the next leaf by first incrementing the slot and only after to check if that slot is beyond the last item of the current leaf. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
-
Robbie Ko authored
commit ec125cfb upstream. While logging new directory entries, at tree-log.c:log_new_dir_dentries(), after we call btrfs_search_forward() we get a leaf with a read lock on it, and without unlocking that leaf we can end up calling btrfs_iget() to get an inode pointer. The later (btrfs_iget()) can end up doing a read-only search on the same tree again, if the inode is not in memory already, which ends up causing a deadlock if some other task in the meanwhile started a write search on the tree and is attempting to write lock the same leaf that btrfs_search_forward() locked while holding write locks on upper levels of the tree blocking the read search from btrfs_iget(). In this scenario we get a deadlock. So fix this by releasing the search path before calling btrfs_iget() at tree-log.c:log_new_dir_dentries(). Example trace of such deadlock: [ 4077.478852] kworker/u24:10 D ffff88107fc90640 0 14431 2 0x00000000 [ 4077.486752] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [ 4077.494346] ffff880ffa56bad0 0000000000000046 0000000000009000 ffff880ffa56bfd8 [ 4077.502629] ffff880ffa56bfd8 ffff881016ce21c0 ffffffffa06ecb26 ffff88101a5d6138 [ 4077.510915] ffff880ebb5173b0 ffff880ffa56baf8 ffff880ebb517410 ffff881016ce21c0 [ 4077.519202] Call Trace: [ 4077.528752] [<ffffffffa06ed5ed>] ? btrfs_tree_lock+0xdd/0x2f0 [btrfs] [ 4077.536049] [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30 [ 4077.542574] [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs] [ 4077.550171] [<ffffffffa06a5073>] ? btrfs_lookup_file_extent+0x33/0x40 [btrfs] [ 4077.558252] [<ffffffffa06c600b>] ? __btrfs_drop_extents+0x13b/0xdf0 [btrfs] [ 4077.566140] [<ffffffffa06fc9e2>] ? add_delayed_data_ref+0xe2/0x150 [btrfs] [ 4077.573928] [<ffffffffa06fd629>] ? btrfs_add_delayed_data_ref+0x149/0x1d0 [btrfs] [ 4077.582399] [<ffffffffa06cf3c0>] ? __set_extent_bit+0x4c0/0x5c0 [btrfs] [ 4077.589896] [<ffffffffa06b4a64>] ? insert_reserved_file_extent.constprop.75+0xa4/0x320 [btrfs] [ 4077.599632] [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs] [ 4077.607134] [<ffffffffa06bab57>] ? btrfs_finish_ordered_io+0x2e7/0x600 [btrfs] [ 4077.615329] [<ffffffff8104cbc2>] ? process_one_work+0x142/0x3d0 [ 4077.622043] [<ffffffff8104d729>] ? worker_thread+0x109/0x3b0 [ 4077.628459] [<ffffffff8104d620>] ? manage_workers.isra.26+0x270/0x270 [ 4077.635759] [<ffffffff81052b0f>] ? kthread+0xaf/0xc0 [ 4077.641404] [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110 [ 4077.648696] [<ffffffff814a9ac8>] ? ret_from_fork+0x58/0x90 [ 4077.654926] [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110 [ 4078.358087] kworker/u24:15 D ffff88107fcd0640 0 14436 2 0x00000000 [ 4078.365981] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [ 4078.373574] ffff880ffa57fad0 0000000000000046 0000000000009000 ffff880ffa57ffd8 [ 4078.381864] ffff880ffa57ffd8 ffff88103004d0a0 ffffffffa06ecb26 ffff88101a5d6138 [ 4078.390163] ffff880fbeffc298 ffff880ffa57faf8 ffff880fbeffc2f8 ffff88103004d0a0 [ 4078.398466] Call Trace: [ 4078.408019] [<ffffffffa06ed5ed>] ? btrfs_tree_lock+0xdd/0x2f0 [btrfs] [ 4078.415322] [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30 [ 4078.421844] [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs] [ 4078.429438] [<ffffffffa06a5073>] ? btrfs_lookup_file_extent+0x33/0x40 [btrfs] [ 4078.437518] [<ffffffffa06c600b>] ? __btrfs_drop_extents+0x13b/0xdf0 [btrfs] [ 4078.445404] [<ffffffffa06fc9e2>] ? add_delayed_data_ref+0xe2/0x150 [btrfs] [ 4078.453194] [<ffffffffa06fd629>] ? btrfs_add_delayed_data_ref+0x149/0x1d0 [btrfs] [ 4078.461663] [<ffffffffa06cf3c0>] ? __set_extent_bit+0x4c0/0x5c0 [btrfs] [ 4078.469161] [<ffffffffa06b4a64>] ? insert_reserved_file_extent.constprop.75+0xa4/0x320 [btrfs] [ 4078.478893] [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs] [ 4078.486388] [<ffffffffa06bab57>] ? btrfs_finish_ordered_io+0x2e7/0x600 [btrfs] [ 4078.494561] [<ffffffff8104cbc2>] ? process_one_work+0x142/0x3d0 [ 4078.501278] [<ffffffff8104a507>] ? pwq_activate_delayed_work+0x27/0x40 [ 4078.508673] [<ffffffff8104d729>] ? worker_thread+0x109/0x3b0 [ 4078.515098] [<ffffffff8104d620>] ? manage_workers.isra.26+0x270/0x270 [ 4078.522396] [<ffffffff81052b0f>] ? kthread+0xaf/0xc0 [ 4078.528032] [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110 [ 4078.535325] [<ffffffff814a9ac8>] ? ret_from_fork+0x58/0x90 [ 4078.541552] [<ffffffff81052a60>] ? kthread_create_on_node+0x110/0x110 [ 4079.355824] user-space-program D ffff88107fd30640 0 32020 1 0x00000000 [ 4079.363716] ffff880eae8eba10 0000000000000086 0000000000009000 ffff880eae8ebfd8 [ 4079.372003] ffff880eae8ebfd8 ffff881016c162c0 ffffffffa06ecb26 ffff88101a5d6138 [ 4079.380294] ffff880fbed4b4c8 ffff880eae8eba38 ffff880fbed4b528 ffff881016c162c0 [ 4079.388586] Call Trace: [ 4079.398134] [<ffffffffa06ed595>] ? btrfs_tree_lock+0x85/0x2f0 [btrfs] [ 4079.405431] [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30 [ 4079.411955] [<ffffffffa06876fb>] ? btrfs_lock_root_node+0x2b/0x40 [btrfs] [ 4079.419644] [<ffffffffa068ce83>] ? btrfs_search_slot+0xa03/0xb10 [btrfs] [ 4079.427237] [<ffffffffa06aba52>] ? btrfs_buffer_uptodate+0x52/0x70 [btrfs] [ 4079.435041] [<ffffffffa0689b60>] ? generic_bin_search.constprop.38+0x80/0x190 [btrfs] [ 4079.443897] [<ffffffffa068ea44>] ? btrfs_insert_empty_items+0x74/0xd0 [btrfs] [ 4079.451975] [<ffffffffa072c443>] ? copy_items+0x128/0x850 [btrfs] [ 4079.458890] [<ffffffffa072da10>] ? btrfs_log_inode+0x629/0xbf3 [btrfs] [ 4079.466292] [<ffffffffa06f34a1>] ? btrfs_log_inode_parent+0xc61/0xf30 [btrfs] [ 4079.474373] [<ffffffffa06f45a9>] ? btrfs_log_dentry_safe+0x59/0x80 [btrfs] [ 4079.482161] [<ffffffffa06c298d>] ? btrfs_sync_file+0x20d/0x330 [btrfs] [ 4079.489558] [<ffffffff8112777c>] ? do_fsync+0x4c/0x80 [ 4079.495300] [<ffffffff81127a0a>] ? SyS_fdatasync+0xa/0x10 [ 4079.501422] [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b [ 4079.508334] user-space-program D ffff88107fc30640 0 32021 1 0x00000004 [ 4079.516226] ffff880eae8efbf8 0000000000000086 0000000000009000 ffff880eae8effd8 [ 4079.524513] ffff880eae8effd8 ffff881030279610 ffffffffa06ecb26 ffff88101a5d6138 [ 4079.532802] ffff880ebb671d88 ffff880eae8efc20 ffff880ebb671de8 ffff881030279610 [ 4079.541092] Call Trace: [ 4079.550642] [<ffffffffa06ed595>] ? btrfs_tree_lock+0x85/0x2f0 [btrfs] [ 4079.557941] [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30 [ 4079.564463] [<ffffffffa068cc1f>] ? btrfs_search_slot+0x79f/0xb10 [btrfs] [ 4079.572058] [<ffffffffa06bb7d8>] ? btrfs_truncate_inode_items+0x168/0xb90 [btrfs] [ 4079.580526] [<ffffffffa06b04be>] ? join_transaction.isra.15+0x1e/0x3a0 [btrfs] [ 4079.588701] [<ffffffffa06b206d>] ? start_transaction+0x8d/0x470 [btrfs] [ 4079.596196] [<ffffffffa0690ac6>] ? block_rsv_add_bytes+0x16/0x50 [btrfs] [ 4079.603789] [<ffffffffa06bc2e9>] ? btrfs_truncate+0xe9/0x2e0 [btrfs] [ 4079.610994] [<ffffffffa06bd00b>] ? btrfs_setattr+0x30b/0x410 [btrfs] [ 4079.618197] [<ffffffff81117c1c>] ? notify_change+0x1dc/0x680 [ 4079.624625] [<ffffffff8123c8a4>] ? aa_path_perm+0xd4/0x160 [ 4079.630854] [<ffffffff810f4fcb>] ? do_truncate+0x5b/0x90 [ 4079.636889] [<ffffffff810f59fa>] ? do_sys_ftruncate.constprop.15+0x10a/0x160 [ 4079.644869] [<ffffffff8110d87b>] ? SyS_fcntl+0x5b/0x570 [ 4079.650805] [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b [ 4080.410607] user-space-program D ffff88107fc70640 0 32028 12639 0x00000004 [ 4080.418489] ffff880eaeccbbe0 0000000000000086 0000000000009000 ffff880eaeccbfd8 [ 4080.426778] ffff880eaeccbfd8 ffff880f317ef1e0 ffffffffa06ecb26 ffff88101a5d6138 [ 4080.435067] ffff880ef7e93928 ffff880f317ef1e0 ffff880eaeccbc08 ffff880f317ef1e0 [ 4080.443353] Call Trace: [ 4080.452920] [<ffffffffa06ed15d>] ? btrfs_tree_read_lock+0xdd/0x190 [btrfs] [ 4080.460703] [<ffffffff81053680>] ? wake_up_atomic_t+0x30/0x30 [ 4080.467225] [<ffffffffa06876bb>] ? btrfs_read_lock_root_node+0x2b/0x40 [btrfs] [ 4080.475400] [<ffffffffa068cc81>] ? btrfs_search_slot+0x801/0xb10 [btrfs] [ 4080.482994] [<ffffffffa06b2df0>] ? btrfs_clean_one_deleted_snapshot+0xe0/0xe0 [btrfs] [ 4080.491857] [<ffffffffa06a70a6>] ? btrfs_lookup_inode+0x26/0x90 [btrfs] [ 4080.499353] [<ffffffff810ec42f>] ? kmem_cache_alloc+0xaf/0xc0 [ 4080.505879] [<ffffffffa06bd905>] ? btrfs_iget+0xd5/0x5d0 [btrfs] [ 4080.512696] [<ffffffffa06caf04>] ? btrfs_get_token_64+0x104/0x120 [btrfs] [ 4080.520387] [<ffffffffa06f341f>] ? btrfs_log_inode_parent+0xbdf/0xf30 [btrfs] [ 4080.528469] [<ffffffffa06f45a9>] ? btrfs_log_dentry_safe+0x59/0x80 [btrfs] [ 4080.536258] [<ffffffffa06c298d>] ? btrfs_sync_file+0x20d/0x330 [btrfs] [ 4080.543657] [<ffffffff8112777c>] ? do_fsync+0x4c/0x80 [ 4080.549399] [<ffffffff81127a0a>] ? SyS_fdatasync+0xa/0x10 [ 4080.555534] [<ffffffff814a9b72>] ? system_call_fastpath+0x16/0x1b Signed-off-by:
-
Liu Bo authored
commit ef85b25e upstream. This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y. Commit 1ba98d08 ("Btrfs: detect corruption when non-root leaf has zero item") assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root), however, we should not use btrfs_root_bytenr(root) since it's mainly got updated during committing transaction. So the check can fail when doing COW on this leaf while it is a root. This changes to use "if (leaf == btrfs_root_node(root))" instead, just like how we check whether leaf is a root in __btrfs_cow_block(). Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item) Reported-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Maxim Patlasov authored
commit 2939e1a8 upstream. Problem statement: unprivileged user who has read-write access to more than one btrfs subvolume may easily consume all kernel memory (eventually triggering oom-killer). Reproducer (./mkrmdir below essentially loops over mkdir/rmdir): [root@kteam1 ~]# cat prep.sh DEV=/dev/sdb mkfs.btrfs -f $DEV mount $DEV /mnt for i in `seq 1 16` do mkdir /mnt/$i btrfs subvolume create /mnt/SV_$i ID=`btrfs subvolume list /mnt |grep "SV_$i$" |cut -d ' ' -f 2` mount -t btrfs -o subvolid=$ID $DEV /mnt/$i chmod a+rwx /mnt/$i done [root@kteam1 ~]# sh prep.sh [maxim@kteam1 ~]$ for i in `seq 1 16`; do ./mkrmdir /mnt/$i 2000 2000 & done [root@kteam1 ~]# for i in `seq 1 4`; do grep "kmalloc-128" /proc/slabinfo | grep -v dma; sleep 60; done kmalloc-128 10144 10144 128 32 1 : tunables 0 0 0 : slabdata 317 317 0 kmalloc-128 9992352 9992352 128 32 1 : tunables 0 0 0 : slabdata 312261 312261 0 kmalloc-128 24226752 24226752 128 32 1 : tunables 0 0 0 : slabdata 757086 757086 0 kmalloc-128 42754240 42754240 128 32 1 : tunables 0 0 0 : slabdata 1336070 1336070 0 The huge numbers above come from insane number of async_work-s allocated and queued by btrfs_wq_run_delayed_node. The problem is caused by btrfs_wq_run_delayed_node() queuing more and more works if the number of delayed items is above BTRFS_DELAYED_BACKGROUND. The worker func (btrfs_async_run_delayed_root) processes at least BTRFS_DELAYED_BATCH items (if they are present in the list). So, the machinery works as expected while the list is almost empty. As soon as it is getting bigger, worker func starts to process more than one item at a time, it takes longer, and the chances to have async_works queued more than needed is getting higher. The problem above is worsened by another flaw of delayed-inode implementation: if async_work was queued in a throttling branch (number of items >= BTRFS_DELAYED_WRITEBACK), corresponding worker func won't quit until the number of items < BTRFS_DELAYED_BACKGROUND / 2. So, it is possible that the func occupies CPU infinitely (up to 30sec in my experiments): while the func is trying to drain the list, the user activity may add more and more items to the list. The patch fixes both problems in straightforward way: refuse queuing too many works in btrfs_wq_run_delayed_node and bail out of worker func if at least BTRFS_DELAYED_WRITEBACK items are processed. Changed in v2: remove support of thresh == NO_THRESHOLD. Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Jens Axboe authored
commit 0cbc72a1 upstream. aoeblk contains some mysterious code, that wants to elevate the bio vec page counts while it's under IO. That is not needed, it's fragile, and it's causing kernel oopses for some. Reported-by:
Tested-by: Don Koch <kochd@us.ibm.com> Tested-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
- 15 Dec, 2016 28 commits
-
-
Greg Kroah-Hartman authored
-
David Michael authored
commit 57891633 upstream. Both asn1 headers are included by rsa_helper.c, so rsa_helper.o should explicitly depend on them. Signed-off-by:
David Michael <david.michael@coreos.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by:
-
Michal Hocko authored
commit 777c6e0d upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sven Eckelmann authored
commit c2d0f48a upstream. batadv_tt_prepare_tvlv_local_data can fail to allocate the memory for the new TVLV block. The caller is informed about this problem with the returned length of 0. Not checking this value results in an invalid memory access when either tt_data or tt_change is accessed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Boris Brezillon authored
commit 7e251bb2 upstream. The current ndelay() macro definition has an extra semi-colon at the end of the line thus leading to a compilation error when ndelay is used in a conditional block without curly braces like this one: if (cond) ndelay(t); else ... which, after the preprocessor pass gives: if (cond) m68k_ndelay(t);; else ... thus leading to the following gcc error: error: 'else' without a previous 'if' Remove this extra semi-colon. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c8ee038b ("m68k: Implement ndelay() based on the existing udelay() logic") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Jeff Layton authored
commit c3f4688a upstream. This function sets req->r_locked_dir which is supposed to indicate to ceph_fill_trace that the parent's i_rwsem is locked for write. Unfortunately, there is no guarantee that the dir will be locked when d_revalidate is called, so we really don't want ceph_fill_trace to do any dcache manipulation from this context. Clear req->r_locked_dir since it's clearly not safe to do that. What we really want to know with d_revalidate is whether the dentry still points to the same inode. ceph_fill_trace installs a pointer to the inode in req->r_target_inode, so we can just compare that to d_inode(dentry) to see if it's the same one after the lookup. Also, since we aren't generally interested in the parent here, we can switch to using a GETATTR to hint that to the MDS, which also means that we only need to reserve one cap. Finally, just remove the d_unhashed check. That's really outside the purview of a filesystem's d_revalidate. If the thing became unhashed while we're checking it, then that's up to the VFS to handle anyway. Fixes: 200fd27c ("ceph: use lookup request to revalidate dentry") Link: http://tracker.ceph.com/issues/18041Reported-by:
Donatas Abraitis <donatas.abraitis@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Stefan Agner authored
commit 4b707fa0 upstream. The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them separately: Clock Clock Root Description apb_clk MAIN_AXI_CLK_ROOT AXI clock pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock All of them are switched by a single gate, which is part of the IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for the AXI bus clock (clock-name "axi") makes sure the gate gets enabled when accessing registers. There seem to be no separate AXI display clock, and the clock is optional. Hence remove the dummy clock. This fixes kernel freezes when starting the X-Server (which disables/re-enables the display controller). Fixes: e8ed73f6 ("ARM: dts: imx7d: add lcdif support") Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Roger Shimizu authored
commit 038ccb3e upstream. Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used. [0] https://bugs.debian.org/845611 Fixes: b1742ffa ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") Reported-by:
Ryan Tandy <ryan@nardis.ca> Tested-by:
Roger Shimizu <rogershimizu@gmail.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 9713adc2 upstream. Revert commit 2c85025c (ACPI: Execute _PTS before system reboot) as it is reported to cause poweroff and reboot to hang on Dell Latitude E7250. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187061Reported-by:
Gianpaolo <gianpaoloc@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
추지호 authored
commit b67d0dd7 upstream. Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by:
Jiho Chu <jiho.chu@samsung.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
commit 332b05ca upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Romain Perier authored
commit 9e5f7a14 upstream. mv_cesa_hash_std_step() copies the creq->state into the SRAM at each step, but this is only required on the first one. By doing that, we overwrite the engine state, and get erroneous results when the crypto request is split in several chunks to fit in the internal SRAM. This commit changes the function to copy the state only on the first step. Fixes: commit 2786cee8 ("crypto: marvell - Move SRAM I/O op...") Signed-off-by:
Romain Perier <romain.perier@free-electrons.com> Signed-off-by:
-
tim authored
commit 48a99272 upstream. Algorithms not compatible with mcryptd could be spawned by mcryptd with a direct crypto_alloc_tfm invocation using a "mcryptd(alg)" name construct. This causes mcryptd to crash the kernel if an arbitrary "alg" is incompatible and not intended to be used with mcryptd. It is an issue if AF_ALG tries to spawn mcryptd(alg) to expose it externally. But such algorithms must be used internally and not be exposed. We added a check to enforce that only internal algorithms are allowed with mcryptd at the time mcryptd is spawning an algorithm. Link: http://marc.info/?l=linux-crypto-vger&m=148063683310477&w=2Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Horia Geantă authored
commit 39eaf759 upstream. Start with a clean slate before dealing with bit 16 (pointer size) of Master Configuration Register. This fixes the case of AArch64 boot loader + AArch32 kernel, when the boot loader might set MCFGR[PS] and kernel would fail to clear it. Reported-by:
Alison Wang <alison.wang@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Reviewed-By:
-
Romain Perier authored
commit 68c7f8c1 upstream. No need to copy the template of an hash operation twice into the SRAM from the step function. Fixes: commit 85030c51 ("crypto: marvell - Add support for chai...") Signed-off-by:
-
Dan Williams authored
commit d6eb270c upstream. Given dimms and bus commands share the same command number space we need to be careful that we are translating status in the correct context. Otherwise we can, for example, fail an ND_CMD_GET_CONFIG_SIZE command because max_xfer is zero. It fails because that condition erroneously correlates with the 'cleared == 0' failure of ND_CMD_CLEAR_ERROR. Fixes: aef25338 ("libnvdimm, nfit: centralize command status translation") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 82aa37cf upstream. If an ARS Status command returns truncated output, do not process partial records or otherwise consume non-status fields. Fixes: 0caeef63 ("libnvdimm: Add a poison list and export badblocks") Signed-off-by:
-
Dan Williams authored
commit efda1b5d upstream. Given ambiguities in the ACPI 6.1 definition of the "Output (Size)" field of the ARS (Address Range Scrub) Status command, a firmware implementation may in practice return 0, 4, or 8 to indicate that there is no output payload to process. The specification states "Size of Output Buffer in bytes, including this field.". However, 'Output Buffer' is also the name of the entire payload, and earlier in the specification it states "Max Query ARS Status Output Buffer Size: Maximum size of buffer (including the Status and Extended Status fields)". Without this fix if the BIOS happens to return 0 it causes memory corruption as evidenced by this result from the acpi_nfit_ctl() unit test. ars_status00000000: 00020000 00000000 ........ BUG: stack guard page was hit at ffffc90001750000 (stack is ffffc9000174c000..ffffc9000174ffff) kernel stack overflow (page fault): 0000 [#1] SMP DEBUG_PAGEALLOC task: ffff8803332d2ec0 task.stack: ffffc9000174c000 RIP: 0010:[<ffffffff814cfe72>] [<ffffffff814cfe72>] __memcpy+0x12/0x20 RSP: 0018:ffffc9000174f9a8 EFLAGS: 00010246 RAX: ffffc9000174fab8 RBX: 0000000000000000 RCX: 000000001fffff56 RDX: 0000000000000000 RSI: ffff8803231f5a08 RDI: ffffc90001750000 RBP: ffffc9000174fa88 R08: ffffc9000174fab0 R09: ffff8803231f54b8 R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000003 R15: ffff8803231f54a0 FS: 00007f3a611af640(0000) GS:ffff88033ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90001750000 CR3: 0000000325b20000 CR4: 00000000000406e0 Stack: ffffffffa00bc60d 0000000000000008 ffffc90000000001 ffffc9000174faac 0000000000000292 ffffffffa00c24e4 ffffffffa00c2914 0000000000000000 0000000000000000 ffffffff00000003 ffff880331ae8ad0 0000000800000246 Call Trace: [<ffffffffa00bc60d>] ? acpi_nfit_ctl+0x49d/0x750 [nfit] [<ffffffffa01f4fe0>] nfit_test_probe+0x670/0xb1b [nfit_test] Fixes: 747ffe11 ("libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing") Signed-off-by:
-
Vishal Verma authored
commit 9a901f54 upstream. ACPI DSMs can have an 'extended' status which can be non-zero to convey additional information about the command. In the xlat_status routine, where we translate the command statuses, we were returning an error for a non-zero extended status, even if the primary status indicated success. Return from each command's 'case' once we have verified both its status and extend status are good. Fixes: 11294d63 ("nfit: fail DSMs that return non-zero status by default") Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit 7f612a7f upstream. Lukasz reported that perf stat counters overflow handling is broken on KNL/SLM. Both these parts have full_width_write set, and that does indeed have a problem. In order to deal with counter wrap, we must sample the counter at at least half the counter period (see also the sampling theorem) such that we can unambiguously reconstruct the count. However commit: 069e0c3c ("perf/x86/intel: Support full width counting") sets the sampling interval to the full period, not half. Fixing that exposes another issue, in that we must not sign extend the delta value when we shift it right; the counter cannot have decremented after all. With both these issues fixed, counter overflow functions correctly again. Reported-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Tested-by:
Liang, Kan <kan.liang@intel.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 069e0c3c ("perf/x86/intel: Support full width counting") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peng Tao authored
commit c4587631 upstream. local_addr.svm_cid is host cid. We should check guest cid instead, which is remote_addr.svm_cid. Otherwise we end up resetting all connections to all guests. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Peng Tao <bergwolf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Galbraith authored
commit 83929cce upstream. Michael Kerrisk reported: > Regarding the previous paragraph... My tests indicate > that writing *any* value to the autogroup [nice priority level] > file causes the task group to get a lower priority. Because autogroup didn't call the then meaningless scale_load()... Autogroup nice level adjustment has been broken ever since load resolution was increased for 64-bit kernels. Use scale_load() to scale group weight. Michael Kerrisk tested this patch to fix the problem: > Applied and tested against 4.9-rc6 on an Intel u7 (4 cores). > Test setup: > > Terminal window 1: running 40 CPU burner jobs > Terminal window 2: running 40 CPU burner jobs > Terminal window 1: running 1 CPU burner job > > Demonstrated that: > * Writing "0" to the autogroup file for TW1 now causes no change > to the rate at which the process on the terminal consume CPU. > * Writing -20 to the autogroup file for TW1 caused those processes > to get the lion's share of CPU while TW2 TW3 get a tiny amount. > * Writing -20 to the autogroup files for TW1 and TW3 allowed the > process on TW3 to get as much CPU as it was getting as when > the autogroup nice values for both terminals were 0. Reported-by:
Michael Kerrisk <mtk.manpages@gmail.com> Tested-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-man <linux-man@vger.kernel.org> Link: http://lkml.kernel.org/r/1479897217.4306.6.camel@gmx.deSigned-off-by:
-
Mauricio Faria de Oliveira authored
commit 2319f847 upstream. The BUG_ON() recently introduced in lpfc_sli_ringtxcmpl_put() is hit in the lpfc_els_abort() > lpfc_sli_issue_abort_iotag() > lpfc_sli_abort_iotag_issue() function path [similar names], due to 'piocb->vport == NULL': BUG_ON(!piocb || !piocb->vport); This happens because lpfc_sli_abort_iotag_issue() doesn't set the 'abtsiocbp->vport' pointer -- but this is not the problem. Previously, lpfc_sli_ringtxcmpl_put() accessed 'piocb->vport' only if 'piocb->iocb.ulpCommand' is neither CMD_ABORT_XRI_CN nor CMD_CLOSE_XRI_CN, which are the only possible values for lpfc_sli_abort_iotag_issue(): lpfc_sli_ringtxcmpl_put(): if ((unlikely(pring->ringno == LPFC_ELS_RING)) && (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) && (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN) && (!(piocb->vport->load_flag & FC_UNLOADING))) lpfc_sli_abort_iotag_issue(): if (phba->link_state >= LPFC_LINK_UP) iabt->ulpCommand = CMD_ABORT_XRI_CN; else iabt->ulpCommand = CMD_CLOSE_XRI_CN; So, this function path would not have hit this possible NULL pointer dereference before. In order to fix this regression, move the second part of the BUG_ON() check prior to the pointer dereference that it does check for. For reference, this is the stack trace observed. The problem happened because an unsolicited event was received - a PLOGI was received after our PLOGI was issued but not yet complete, so the discovery state machine goes on to sw-abort our PLOGI. kernel BUG at drivers/scsi/lpfc/lpfc_sli.c:1326! Oops: Exception in kernel mode, sig: 5 [#1] <...> NIP [...] lpfc_sli_ringtxcmpl_put+0x1c/0xf0 [lpfc] LR [...] __lpfc_sli_issue_iocb_s4+0x188/0x200 [lpfc] Call Trace: [...] [...] __lpfc_sli_issue_iocb_s4+0xb0/0x200 [lpfc] (unreliable) [...] [...] lpfc_sli_issue_abort_iotag+0x2b4/0x350 [lpfc] [...] [...] lpfc_els_abort+0x1a8/0x4a0 [lpfc] [...] [...] lpfc_rcv_plogi+0x6d4/0x700 [lpfc] [...] [...] lpfc_rcv_plogi_plogi_issue+0xd8/0x1d0 [lpfc] [...] [...] lpfc_disc_state_machine+0xc0/0x2b0 [lpfc] [...] [...] lpfc_els_unsol_buffer+0xcc0/0x26c0 [lpfc] [...] [...] lpfc_els_unsol_event+0xa8/0x220 [lpfc] [...] [...] lpfc_complete_unsol_iocb+0xb8/0x138 [lpfc] [...] [...] lpfc_sli4_handle_received_buffer+0x6a0/0xec0 [lpfc] [...] [...] lpfc_sli_handle_slow_ring_event_s4+0x1c4/0x240 [lpfc] [...] [...] lpfc_sli_handle_slow_ring_event+0x24/0x40 [lpfc] [...] [...] lpfc_do_work+0xd88/0x1970 [lpfc] [...] [...] kthread+0x108/0x130 [...] [...] ret_from_kernel_thread+0x5c/0xbc <...> Fixes: 22466da5 ("lpfc: Fix possible NULL pointer dereference") Reported-by:
Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Williams authored
commit 325896ff upstream. Hugh notes in response to commit 4cb19355 "device-dax: fail all private mapping attempts": "I think that is more restrictive than you intended: haven't tried, but I believe it rejects a PROT_READ, MAP_SHARED, O_RDONLY fd mmap, leaving no way to mmap /dev/dax without write permission to it." Indeed it does restrict read-only mappings, switch to checking VM_MAYSHARE, not VM_SHARED. Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Fixes: 4cb19355 ("device-dax: fail all private mapping attempts") Reported-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1be5d4fa upstream. While debugging the rtmutex unlock vs. dequeue race Will suggested to use READ_ONCE() in rt_mutex_owner() as it might race against the cmpxchg_release() in unlock_rt_mutex_safe(). Will: "It's a minor thing which will most likely not matter in practice" Careful search did not unearth an actual problem in todays code, but it's better to be safe than surprised. Suggested-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit dbb26055 upstream. David reported a futex/rtmutex state corruption. It's caused by the following problem: CPU0 CPU1 CPU2 l->owner=T1 rt_mutex_lock(l) lock(l->wait_lock) l->owner = T1 | HAS_WAITERS; enqueue(T2) boost() unlock(l->wait_lock) schedule() rt_mutex_lock(l) lock(l->wait_lock) l->owner = T1 | HAS_WAITERS; enqueue(T3) boost() unlock(l->wait_lock) schedule() signal(->T2) signal(->T3) lock(l->wait_lock) dequeue(T2) deboost() unlock(l->wait_lock) lock(l->wait_lock) dequeue(T3) ===> wait list is now empty deboost() unlock(l->wait_lock) lock(l->wait_lock) fixup_rt_mutex_waiters() if (wait_list_empty(l)) { owner = l->owner & ~HAS_WAITERS; l->owner = owner ==> l->owner = T1 } lock(l->wait_lock) rt_mutex_unlock(l) fixup_rt_mutex_waiters() if (wait_list_empty(l)) { owner = l->owner & ~HAS_WAITERS; cmpxchg(l->owner, T1, NULL) ===> Success (l->owner = NULL) l->owner = owner ==> l->owner = T1 } That means the problem is caused by fixup_rt_mutex_waiters() which does the RMW to clear the waiters bit unconditionally when there are no waiters in the rtmutexes rbtree. This can be fatal: A concurrent unlock can release the rtmutex in the fastpath because the waiters bit is not set. If the cmpxchg() gets in the middle of the RMW operation then the previous owner, which just unlocked the rtmutex is set as the owner again when the write takes place after the successfull cmpxchg(). The solution is rather trivial: verify that the owner member of the rtmutex has the waiters bit set before clearing it. This does not require a cmpxchg() or other atomic operations because the waiters bit can only be set and cleared with the rtmutex wait_lock held. It's also safe against the fast path unlock attempt. The unlock attempt via cmpxchg() will either see the bit set and take the slowpath or see the bit cleared and release it atomically in the fastpath. It's remarkable that the test program provided by David triggers on ARM64 and MIPS64 really quick, but it refuses to reproduce on x86-64, while the problem exists there as well. That refusal might explain that this got not discovered earlier despite the bug existing from day one of the rtmutex implementation more than 10 years ago. Thanks to David for meticulously instrumenting the code and providing the information which allowed to decode this subtle problem. Reported-by:
David Daney <ddaney@caviumnetworks.com> Tested-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Sergey Senozhatsky authored
commit 5c7e9ccd upstream. zram hot_add sysfs attribute is a very 'special' attribute - reading from it creates a new uninitialized zram device. This file, by a mistake, can be read by a 'normal' user at the moment, while only root must be able to create a new zram device, therefore hot_add attribute must have S_IRUSR mode, not S_IRUGO. [akpm@linux-foundation.org: s/sence/sense/, reflow comment to use 80 cols] Fixes: 6566d1a3 ("zram: add dynamic device add/remove functionality") Link: http://lkml.kernel.org/r/20161205155845.20129-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Steven Allen <steven@stebalien.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Helge Deller authored
commit 24d0492b upstream. At bootup we run measurements to calculate the best threshold for when we should be using full TLB flushes instead of just flushing a specific amount of TLB entries. This performance test is run over the kernel text segment. But running this TLB performance test on the kernel text segment turned out to crash some SMP machines when the kernel text pages were mapped as huge pages. To avoid those crashes this patch simply skips this test on some SMP machines and calculates an optimal threshold based on the maximum number of available TLB entries and number of online CPUs. On a technical side, this seems to happen: The TLB measurement code uses flush_tlb_kernel_range() to flush specific TLB entries with a page size of 4k (pdtlb 0(sr1,addr)). On UP systems this purge instruction seems to work without problems even if the pages were mapped as huge pages. But on SMP systems the TLB purge instruction is broadcasted to other CPUs. Those CPUs then crash the machine because the page size is not as expected. C8000 machines with PA8800/PA8900 CPUs were not affected by this problem, because the required cache coherency prohibits to use huge pages at all. Sadly I didn't found any documentation about this behaviour, so this finding is purely based on testing with phyiscal SMP machines (A500-44 and J5000, both were 2-way boxes). Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
