The actual status of the code is Supported.

Reported-by: dave.hansen@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.

Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break.  Skip this if AT_STATX_DONT_SYNC is set.

This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs.  This
can also be watched through tracing on the kafs machine.  The callback
break is seen:

     kworker/1:1-46      [001] .....   978.910812: afs_cb_call: c=0000005f YFSCB.CallBack
     kworker/1:1-46      [001] ...1.   978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb
     kworker/1:1-46      [001] .....   978.911062: afs_call_done:    c=0000005f ret=0 ab=0 [0000000082994ead]

And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:

            stat-4471    [000] .....   986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus
            stat-4471    [000] .....   986.745578: afs_call_done:    c=000000ab ret=0 ab=0 [0000000087fc8c84]

Fixes: 08e0e7c8 ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fixes from Wolfram Sang:
 "Some I2C driver bugfixes for 5.18. Nothing spectacular but worth
  fixing"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

Merge tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
   in 'perf stat'.

 - Fix x86's arch__intr_reg_mask() for the hybrid platform.

 - Address 'perf bench numa' compiler error on s390.

 - Fix check for btf__load_from_kernel_by_id() in libbpf.

 - Fix "all PMU test" 'perf test' to skip hv_24x7/hv_gpci tests on
   powerpc.

 - Fix session topology test to skip the test in guest environment.

 - Skip BPF 'perf test' if clang is not present.

 - Avoid shell test description infinite loop in 'perf test'.

 - Fix Intel LBR callstack entries and nr print message.

* tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf session: Fix Intel LBR callstack entries and nr print message
  perf test bpf: Skip test if clang is not present
  perf test session topology: Fix test to skip the test in guest environment
  perf bench numa: Address compiler error on s390
  perf test: Avoid shell test description infinite loop
  perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform
  perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc
  perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
  perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

Pull input fixes from Dmitry Torokhov:
 "A small fixup to ili210x touchscreen driver, and updated maintainer
  entry for the device tree binding of Mediatek 6779 keypad:

   - fix reset timing of Ilitek touchscreens

   - update maintainer entry of DT binding of Mediatek 6779 keypad"

* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ili210x - use one common reset implementation
  Input: ili210x - fix reset timing
  dt-bindings: input: mediatek,mt6779-keypad: update maintainer

Pull SCSI fixes from James Bottomley:
 "Two patches, both in drivers.

  The iscsi one is fixing the cpumask issue you commented on and the ufs
  one is a late arriving fix for conditions that can occur in Host
  Performance Booster reads"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix referencing invalid rsp field
  scsi: target: Fix incorrect use of cpumask_t

When generating callstack information from branch_stack(Intel LBR), the
actual number of callstack entry should be bigger than the number of
branch_stack, for example:

	branch_stack records:
		B() -> C()
		A() -> B()
	converted callstack records should be:
		C()
		B()
		A()
though, the number of callstack equals
to the number of branch stack plus 1.

This patch fixes above issue in branch_stack__printf(). For example,

	# echo 'scale=2000; 4*a(1)' > cmd
	# perf record --call-graph lbr bc -l < cmd

Before applying this patch, `perf script -D` output:

	1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
	... LBR call chain: nr:8
	.....  0: fffffffffffffe00
	.....  1: 000000000040a410
	.....  2: 000000000040573c
	.....  3: 0000000000408650
	.....  4: 00000000004022f2
	.....  5: 00000000004015f5
	.....  6: 00007f5ed6dcb553
	.....  7: 0000000000401698
	... FP chain: nr:2
	.....  0: fffffffffffffe00
	.....  1: 000000000040a6d8
	... branch callstack: nr:6    # which is not consistent with LBR records.
	.....  0: 000000000040a410
	.....  1: 0000000000408650    # ditto
	.....  2: 00000000004022f2
	.....  3: 00000000004015f5
	.....  4: 00007f5ed6dcb553
	.....  5: 0000000000401698
	 ... thread: bc:17990
	 ...... dso: /usr/bin/bc
	bc 17990 1220022.677386:     894172 cycles:
			  40a410 [unknown] (/usr/bin/bc)
			  40573c [unknown] (/usr/bin/bc)
			  408650 [unknown] (/usr/bin/bc)
			  4022f2 [unknown] (/usr/bin/bc)
			  4015f5 [unknown] (/usr/bin/bc)
		    7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
			  401698 [unknown] (/usr/bin/bc)

After applied:

	1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
	... LBR call chain: nr:8
	.....  0: fffffffffffffe00
	.....  1: 000000000040a410
	.....  2: 000000000040573c
	.....  3: 0000000000408650
	.....  4: 00000000004022f2
	.....  5: 00000000004015f5
	.....  6: 00007f5ed6dcb553
	.....  7: 0000000000401698
	... FP chain: nr:2
	.....  0: fffffffffffffe00
	.....  1: 000000000040a6d8
	... branch callstack: nr:7
	.....  0: 000000000040a410
	.....  1: 000000000040573c
	.....  2: 0000000000408650
	.....  3: 00000000004022f2
	.....  4: 00000000004015f5
	.....  5: 00007f5ed6dcb553
	.....  6: 0000000000401698
	 ... thread: bc:17990
	 ...... dso: /usr/bin/bc
	bc 17990 1220022.677386:     894172 cycles:
			  40a410 [unknown] (/usr/bin/bc)
			  40573c [unknown] (/usr/bin/bc)
			  408650 [unknown] (/usr/bin/bc)
			  4022f2 [unknown] (/usr/bin/bc)
			  4015f5 [unknown] (/usr/bin/bc)
		    7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
			  401698 [unknown] (/usr/bin/bc)

Change from v1:
	- refined code style according to Jiri's review comments.
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220517015726.96131-1-chengdongli@tencent.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Perf BPF filter test fails in environment where "clang" is not
installed.

Test failure logs:

<<>>
 42: BPF filter                    :
 42.1: Basic BPF filtering         : Skip
 42.2: BPF pinning                 : FAILED!
 42.3: BPF prologue generation     : FAILED!
<<>>

Enabling verbose option provided debug logs which says clang/llvm needs
to be installed. Snippet of verbose logs:

<<>>
 42.2: BPF pinning                  :
 --- start ---
test child forked, pid 61423
ERROR:	unable to find clang.
Hint:	Try to install latest clang/llvm to support BPF.
        Check your $PATH

<<logs_here>>

Failed to compile test case: 'Basic BPF llvm compile'
Unable to get BPF object, fix kbuild first
test child finished with -1
 ---- end ----
BPF filter subtest 2: FAILED!
<<>>

Here subtests, "BPF pinning" and "BPF prologue generation" failed and
logs shows clang/llvm is needed. After installing clang, testcase
passes.

Reason on why subtest failure happens though logs has proper debug
information:

Main function __test__bpf calls test_llvm__fetch_bpf_obj by
passing 4th argument as true ( 4th arguments maps to parameter
"force" in test_llvm__fetch_bpf_obj ). But this will cause
test_llvm__fetch_bpf_obj to skip the check for clang/llvm.

Snippet of code part which checks for clang based on
parameter "force" in test_llvm__fetch_bpf_obj:

<<>>
if (!force && (!llvm_param.user_set_param &&
<<>>

Since force is set to "false", test won't get skipped and fails to
compile test case. The BPF code compilation needs clang, So pass the
fourth argument as "false" and also skip the test if reason for return
is "TEST_SKIP"

After the patch:

<<>>
 42: BPF filter                    :
 42.1: Basic BPF filtering         : Skip
 42.2: BPF pinning                 : Skip
 42.3: BPF prologue generation     : Skip
<<>>

Fixes: ba1fae43 ("perf test: Add 'perf test BPF'")
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20220511115438.84032-1-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The session topology test fails in powerpc pSeries platform.

Test logs:

  <<>>
  Session topology : FAILED!
  <<>>

This testcases tests cpu topology by checking the core_id and socket_id
stored in perf_env from perf session. The data from perf session is
compared with the cpu topology information from
"/sys/devices/system/cpu/cpuX/topology" like core_id,
physical_package_id.

In case of virtual environment, detail like physical_package_id is
restricted to be exposed. Hence physical_package_id is set to -1. The
testcase fails on such platforms since socket_id can't be fetched from
topology info.

Skip the testcase in powerpc if physical_package_id returns -1.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>---
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220511114959.84002-1-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The compilation on s390 results in this error:

  # make DEBUG=y bench/numa.o
  ...
  bench/numa.c: In function ‘__bench_numa’:
  bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
              writing between 1 and 11 bytes into a region of size between
              10 and 20 [-Werror=format-truncation=]
  1749 |        snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
                                                               ^~
  ...
  bench/numa.c:1749:64: note: directive argument in the range
                 [-2147483647, 2147483646]
  ...
  #

The maximum length of the %d replacement is 11 characters because of the
negative sign.  Therefore extend the array by two more characters.

Output after:

  # make  DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
  -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
  #

Fixes: 3aff8ba0 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

for_each_shell_test() is already strict in expecting tests to be files
and executable. It is sometimes possible when it iterates over all files
that it finds one that is executable and lacks a newline character. When
this happens the loop never terminates as it doesn't check for EOF.

Add the EOF check to make this loop at least bounded by the file size.

If the description is returned as NULL then also skip the test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220517204144.645913-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.

Without the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15

The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.

Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.

With the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
  XMM10 XMM11 XMM12 XMM13 XMM14 XMM15

Fixes: 6466ec14 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

"perf all PMU test" picks the input events from "perf list --raw-dump
pmu" list and runs "perf stat -e" for each of the event in the list. In
case of powerpc, the PowerVM environment supports events from hv_24x7
and hv_gpci PMU which is of example format like below:

- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/

The value for "?" needs to be filled in depending on system and
respective event. CPM_ADJUNCT_INST needs have core value and domain
value. hv_gpci event needs partition_id.  Similarly, there are other
events for hv_24x7 and hv_gpci having "?" in event format. Hence skip
these events on powerpc platform since values like partition_id, domain
is specific to system and event.

Fixes: 3d5ac9ef ("perf test: Workload test of all PMUs")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520101236.17249-1-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.
Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
        [fault reason 05] PTE Write access is not set

To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.

Fixes: d04913ec ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly expose GICv3 support even if no irqchip is created so
     that userspace doesn't observe it changing pointlessly (fixing a
     regression with QEMU)

   - Don't issue a hypercall to set the id-mapped vectors when protected
     mode is enabled (fix for pKVM in combination with CPUs affected by
     Spectre-v3a)

  x86 (five oneliners, of which the most interesting two are):

   - a NULL pointer dereference on INVPCID executed with paging
     disabled, but only if KVM is using shadow paging

   - an incorrect bsearch comparison function which could truncate the
     result and apply PMU event filtering incorrectly. This one comes
     with a selftests update too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
  KVM: x86: hyper-v: fix type of valid_bank_mask
  KVM: Free new dirty bitmap if creating a new memslot fails
  KVM: eventfd: Fix false positive RCU usage warning
  selftests: kvm/x86: Verify the pmu event filter matches the correct event
  selftests: kvm/x86: Add the helper function create_pmu_event_filter
  kvm: x86/pmu: Fix the compare function used by the pmu event filter
  KVM: arm64: Don't hypercall before EL2 init
  KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
  KVM: x86/mmu: Update number of zapped pages even if page list is stable

Pull clk fixes from Stephen Boyd:
 "Three clk driver fixes to close out the release

   - Fix a divider calculation breaking boot on Broadcom bcm2835

   - Fix HDMI output on Tanix TX6 mini board by reverting a patch

   - Fix clk_set_rate_range() calls on at91 by considering the range
     while calculating the divisor"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: at91: generated: consider range when calculating best rate
  Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"
  clk: bcm2835: fix bcm2835_clock_choose_div

Pull drm fixes from Dave Airlie:
 "Few final fixes for 5.18, one amdgpu, core dp mst leak fix, dma-buf
  two fixes, and i915 has a few fixes, one for a regression on older
  GM45 chipsets,

  dma-buf:
   - ioctl userspace use fix
   - fix dma-buf sysfs name generation

  core:
   - dp/mst leak fix

  amdgpu:
   - suspend/resume regression fix

  i915:
   - fix for #5806: GPU hangs and display artifacts on Intel GM45
   - reject DMC with out-of-spec MMIO
   - correctly mark guilty contexts on GuC reset"

* tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/dp/mst: fix a possible memory leak in fetch_monitor_name()
  dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace
  i915/guc/reset: Make __guc_reset_context aware of guilty engines
  drm/i915/dmc: Add MMIO range restrictions
  dma-buf: ensure unique directory name for dmabuf stats

Merge tag 'drm-intel-fixes-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- fix for #5806: GPU hangs and display artifacts on 5.18-rc3 on Intel GM45
- reject DMC with out-of-spec MMIO (Cc: stable)
- correctly mark guilty contexts on GuC reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YocqqvG6PbYx3QgJ@jlahtine-mobl.ger.corp.intel.com

Fix for a memory leak in dp_mst, a (userspace) build fix for
DMA_BUF_SET_NAME defines and a directory name generation fix for dmabuf
stats
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520072408.cpjzy2taugagvrh7@houat

Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.

The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.

Therefore, re-check the result after acquiring locks and bailing
if they no longer match.

Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.

Fixes: f63a8daa ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix bitops logic in gpio-vf610

 - return an error if the user tries to use inverted polarity in
   gpio-mvebu

* tag 'gpio-fixes-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mvebu/pwm: Refuse requests with inverted polarity
  gpio: gpio-vf610: do not touch other bits when set the target bit

Pull MMC fix from Ulf Hansson:
 "MMC core:

   - Fix busy polling for MMC_SEND_OP_COND again"

* tag 'mmc-v5.18-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Fix busy polling for MMC_SEND_OP_COND again

Pull ceph fix from Ilya Dryomov:
 "A fix for a nasty use-after-free, marked for stable"

* tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client:
  libceph: fix misleading ceph_osdc_cancel_request() comment
  libceph: fix potential use-after-free on linger ping and resends

Pull RISC-V fixes from Palmer Dabbelt:

 - fix the fu540-c000 device tree to avoid a schema check failure on the
   DMA node name

 - fix typo in the PolarFire SOC device tree

* tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: microchip: fix gpio1 reg property typo
  riscv: dts: sifive: fu540-c000: align dma node name with dtschema

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc8/final.

  The MTE and stolen time fixes have been doing the rounds for a little
  while, but review and testing feedback was ongoing until earlier this
  week. The kexec fix showed up on Monday and addresses a failure
  observed under Qemu.

  Summary:

   - Add missing write barrier to publish MTE tags before a pte update

   - Fix kexec relocation clobbering its own data structures

   - Fix stolen time crash if a timer IRQ fires during CPU hotplug"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Ensure the cleared tags are visible before setting the PTE
  arm64: kexec: load from kimage prior to clobbering
  arm64: paravirt: Use RCU read locks to guard stolen_time

With shadow paging enabled, the INVPCID instruction results in a call
to kvm_mmu_invpcid_gva.  If INVPCID is executed with CR0.PG=0, the
invlpg callback is not set and the result is a NULL pointer dereference.
Fix it trivially by checking for mmu->invlpg before every call.

There are other possibilities:

- check for CR0.PG, because KVM (like all Intel processors after P5)
  flushes guest TLB on CR0.PG changes so that INVPCID/INVLPG are a
  nop with paging disabled

- check for EFER.LMA, because KVM syncs and flushes when switching
  MMU contexts outside of 64-bit mode

All of these are tricky, go for the simple solution.  This is CVE-2022-1789.
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long,
but is used as u64, which is wrong for i386, and has been spotted by
LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with
hweight64()"

https://lore.kernel.org/lkml/20220510154750.212913-12-yury.norov@gmail.com/

But it's wrong even without that patch because now bitmap_weight()
dereferences a word after valid_bank_mask on i386.

>> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type
+[-Wshift-count-overflow]
      21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
         |                                                                            ^~
   include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8'
      10 |          ((!!((w) & (1ULL << 0))) +     \
         |                ^
   include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16'
      20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
         |                               ^~~~~~~~~~~~~~~~~
   include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32'
      21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
         |                                                      ^~~~~~~~~~~~~~~~~
   include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64'
      29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
         |                                                 ^~~~~~~~~~~~~~~~~
   arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64'
    1983 |                 if (hc->var_cnt != hweight64(valid_bank_mask))
         |                                    ^~~~~~~~~

CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: Jim Mattson <jmattson@google.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Sean Christopherson <seanjc@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: Wanpeng Li <wanpengli@tencent.com>
CC: kvm@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: x86@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Message-Id: <20220519171504.1238724-1-yury.norov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails.  The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept.  If
there is no old memslot, then obviously the bitmap can't have been
inherited

The bug was exposed by commit 86931ff7 ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.

The backtrace from kmemleak:

  __vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
  __vmalloc_node mm/vmalloc.c:3232 [inline]
  __vmalloc+0x49/0x50 mm/vmalloc.c:3246
  __vmalloc_array mm/util.c:671 [inline]
  __vcalloc+0x49/0x70 mm/util.c:694
  kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
  kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
  kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
  __kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
  kvm_set_memory_region virt/kvm/kvm_main.c:1962
  kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
  kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
  vfs_ioctl fs/ioctl.c:51
  __do_sys_ioctl fs/ioctl.c:870
  __se_sys_ioctl fs/ioctl.c:856
  __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
  do_syscall_x64 arch/x86/entry/common.c:50
  do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

And the relevant sequence of KVM events:

  ioctl(3, KVM_CREATE_VM, 0)              = 4
  ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
                                        flags=KVM_MEM_LOG_DIRTY_PAGES,
                                        guest_phys_addr=0x10000000000000,
                                        memory_size=4096,
                                        userspace_addr=0x20fe8000}
       ) = -1 EINVAL (Invalid argument)

Fixes: 244893fa ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.

Fixes: 757642f9 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.

Fixes: 659d8a62 ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.

Add the CPU to index translation, alongside validity checking.

Discussion thread:

  https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/

Fixes: 7ac0089d ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The splat below can be seen when running kvm-unit-test:

     =============================
     WARNING: suspicious RCU usage
     5.18.0-rc7 #5 Tainted: G          IOE
     -----------------------------
     /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!!

     other info that might help us debug this:

     rcu_scheduler_active = 2, debug_locks = 1
     4 locks held by qemu-system-x86/35124:
      #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm]
      #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm]
      #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm]
      #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm]

     stack backtrace:
     CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G          IOE     5.18.0-rc7 #5
     Call Trace:
      <TASK>
      dump_stack_lvl+0x6c/0x9b
      irqfd_resampler_ack+0xfd/0x110 [kvm]
      kvm_notify_acked_gsi+0x32/0x90 [kvm]
      kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm]
      kvm_hv_set_msr_common+0xec1/0x1160 [kvm]
      kvm_set_msr_common+0x7c3/0xf60 [kvm]
      vmx_set_msr+0x394/0x1240 [kvm_intel]
      kvm_set_msr_ignored_check+0x86/0x200 [kvm]
      kvm_emulate_wrmsr+0x4f/0x1f0 [kvm]
      vmx_handle_exit+0x6fb/0x7e0 [kvm_intel]
      vcpu_enter_guest+0xe5a/0x1900 [kvm]
      kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm]
      kvm_vcpu_ioctl+0x279/0x710 [kvm]
      __x64_sys_ioctl+0x83/0xb0
      do_syscall_64+0x3b/0x90
      entry_SYSCALL_64_after_hwframe+0x44/0xae

resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix
the false positive by using list_for_each_entry_srcu().
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.

Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.

Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:

  $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
  test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
  test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
      6 |         return btf__load_from_kernel_by_id(20151128, NULL);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  $

  $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
  00000000005ba180 T btf__load_from_kernel_by_id
  $

  $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf

  /tmp/build/perf-urgent/perf:     file format elf64-x86-64
  <SNIP>
  00000000005ba180 <btf__load_from_kernel_by_id>:
  #include "record.h"
  #include "util/synthetic-events.h"

  #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
  struct btf *btf__load_from_kernel_by_id(__u32 id)
  {
    5ba180:	55                   	push   %rbp
    5ba181:	48 89 e5             	mov    %rsp,%rbp
    5ba184:	48 83 ec 10          	sub    $0x10,%rsp
    5ba188:	64 48 8b 04 25 28 00 	mov    %fs:0x28,%rax
    5ba18f:	00 00
    5ba191:	48 89 45 f8          	mov    %rax,-0x8(%rbp)
    5ba195:	31 c0                	xor    %eax,%eax
         struct btf *btf;
  #pragma GCC diagnostic push
  #pragma GCC diagnostic ignored "-Wdeprecated-declarations"
         int err = btf__get_from_id(id, &btf);
    5ba197:	48 8d 75 f0          	lea    -0x10(%rbp),%rsi
    5ba19b:	e8 a0 57 e5 ff       	call   40f940 <btf__get_from_id@plt>
    5ba1a0:	89 c2                	mov    %eax,%edx
  #pragma GCC diagnostic pop

         return err ? ERR_PTR(err) : btf;
    5ba1a2:	48 98                	cltq
    5ba1a4:	85 d2                	test   %edx,%edx
    5ba1a6:	48 0f 44 45 f0       	cmove  -0x10(%rbp),%rax
  }
  <SNIP>

Fixes: 218e7b77 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered.  This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.

This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.

[1] bits 35:32 in the event select register and bits 11:8 in the event
    select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
    select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a helper function that creates a pmu event filter given an event
list.  Currently, a pmu event filter can only be created with the same
hard coded event list.  Add a way to create one given a different event
list.

Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.

No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When returning from the compare function the u64 is truncated to an
int.  This results in a loss of the high nybble[1] in the event select
and its sign if that nybble is in use.  Switch from using a result that
can end up being truncated to a result that can only be: 1, 0, -1.

[1] bits 35:32 in the event select register and bits 11:8 in the event
    select.

Fixes: 7ff775ac ("KVM: x86/pmu: Use binary search to check filtered events")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220517051238.2566934-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull crypto fix from Herbert Xu:
 "Fix a regression in a recent fix to qcom-rng"

* tag 'v5.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ