- 30 Apr, 2015 18 commits
-
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/usb/go7007/go7007-driver.c:452 frame_boundary() warn: variable dereferenced before check 'vb' (see line 449) Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Using static const allows the compiler to optimize the code. Before static const: text data bss dec hex filename 4982 524 1568 7074 1ba2 drivers/media/tuners/qt1010.o After static const: text data bss dec hex filename 4714 524 1568 6806 1a96 drivers/media/tuners/qt1010.o Signed-off-by: -
Mauro Carvalho Chehab authored
The streg_cbdata can have a negative error value. So, it should be an integer, and not u8, as reported by smatch: drivers/media/radio/wl128x/fmdrv_common.c:1517 fmc_prepare() warn: assigning (-115) to unsigned variable 'fmdev->streg_cbdata' Signed-off-by: -
Mauro Carvalho Chehab authored
There are some false-positive warnings produced by smatch: drivers/media/rc/ir-sony-decoder.c:129 ir_sony_decode() warn: missing break? reassigning 'data->state' drivers/media/rc/ir-sony-decoder.c:137 ir_sony_decode() warn: missing break? reassigning 'data->state' drivers/media/rc/ir-sony-decoder.c:165 ir_sony_decode() warn: missing break? reassigning 'data->state' This is due to the logic used there to detect the need of a break. While those are false positives, it is easy to get rid of them without any drawbacks. The side effect is a cleaner function, with is good. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/s5p-mfc/s5p_mfc.c:1340 s5p_mfc_runtime_resume() warn: this array is probably non-NULL. 'm_dev->alloc_ctx' alloc_ctx can never be NULL, as it is embeeded inside the struct s5p_mfc_dev. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/s3c-camif/camif-capture.c:463 queue_setup() warn: variable dereferenced before check 'fmt' (see line 460) Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/zoran/zoran_device.c:1594 zoran_init_hardware() warn: inconsistent indenting Fix indent. While here, fix CodingStyle and remove dead code, as it can always be recovered from git logs. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/ivtv/ivtv-driver.c:832 ivtv_init_struct2() error: buffer overflow 'itv->card->video_inputs' 6 <= 6 That happens because nof_inputs and nof_audio_inputs can be initialized as IVTV_CARD_MAX_VIDEO_INPUTS, instead of IVTV_CARD_MAX_VIDEO_INPUTS - 1. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/radio/radio-si476x.c:571 si476x_radio_do_post_powerup_init() warn: inconsistent indenting Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero This is done right at saa717x_write(), but the read function is broken. Thankfully, there's just one place at saa717x driver that uses multibyte read (for status report, via printk). Yet, let's fix it. From saa717x_write(), it is clear that the bytes are in little endian: mm1[4] = (value >> 16) & 0xff; mm1[3] = (value >> 8) & 0xff; mm1[2] = value & 0xff; So, the same order should be valid for read too. Compile-tested only. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/saa7164/saa7164-core.c:631 saa7164_irq() warn: variable dereferenced before check 'dev' (see line 621) Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/ngene/ngene-core.c:1529 init_channel() error: we previously assumed 'chan->fe' could be null (see line 1521) Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/saa7134/saa7134-cards.c:7197 saa7134_xc2028_callback() warn: inconsistent indenting drivers/media/pci/saa7134/saa7134-cards.c:7846 saa7134_board_init2() warn: inconsistent indenting drivers/media/pci/saa7134/saa7134-cards.c:7913 saa7134_board_init2() warn: inconsistent indenting While here, fix a few CodingStyle issues on the affected code Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/cx18/cx18-driver.c:807 cx18_init_struct2() error: buffer overflow 'cx->card->video_inputs' 6 <= 6 That happens because nof_inputs and nof_audio_inputs can be initialized as CX18_CARD_MAX_VIDEO_INPUTS, instead of CX18_CARD_MAX_VIDEO_INPUTS - 1. Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/rc/rc-main.c:749 rc_close() warn: inconsistent indenting There's an extra space there. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_subdev_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1679:27: warning: variable 'sdinfo' set but not used [-Wunused-but-set-variable] struct vpfe_subdev_info *sdinfo; ^ Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by:Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c:513 vpfe_ccdc_set_params() warn: inconsistent indenting Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_ccdc_update_raw_params': drivers/media/platform/am437x/am437x-vpfe.c:430:38: warning: variable 'config_params' set but not used [-Wunused-but-set-variable] struct vpfe_ccdc_config_params_raw *config_params = ^ vpfe_ccdc_update_raw_params() is supposed to update the raw params at ccdc. However, it is just creating a local var and changing it. Compile-tested only. Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
- 28 Apr, 2015 13 commits
-
-
Hans Verkuil authored
radio-bcm2048.c: In function 'bcm2048_i2c_driver_probe': radio-bcm2048.c:2597:11: warning: variable 'skip_release' set but not used [-Wunused-but-set-variable] int err, skip_release = 0; ^ Signed-off-by: -
Mauro Carvalho Chehab authored
In file included from include/uapi/linux/posix_types.h:4:0, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/uapi/linux/sysinfo.h:4, from include/uapi/linux/kernel.h:4, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/input.h:11, from drivers/media/usb/dvb-usb/dvb-usb.h:13, from drivers/media/usb/dvb-usb/dib0700.h:13, from drivers/media/usb/dvb-usb/dib0700_devices.c:9: drivers/media/dvb-frontends/dib8000.h: In function 'dib8000_attach': include/linux/stddef.h:8:14: warning: return makes integer from pointer without a cast [-Wint-conversion] #define NULL ((void *)0) ^ drivers/media/dvb-frontends/dib8000.h:72:9: note: in expansion of macro 'NULL' return NULL; ^ Reported-by: -
Hans Verkuil authored
In file included from drivers/media/common/b2c2/flexcop-fe-tuner.c:13:0: drivers/media/dvb-frontends/cx24123.h:54:2: warning: 'cx24123_get_tuner_i2c_adapter' defined but not used [-Wunused-function] cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/em28xx/em28xx-dvb.c:46:0: drivers/media/dvb-frontends/s921.h:40:2: warning: 's921_get_tuner_i2c_adapter' defined but not used [-Wunused-function] s921_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/em28xx/em28xx-dvb.c:55:0: drivers/media/dvb-frontends/mb86a20s.h:49:2: warning: 'mb86a20s_get_tuner_i2c_adapter' defined but not used [-Wunused-function] mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0: drivers/media/dvb-frontends/mb86a20s.h:49:2: warning: 'mb86a20s_get_tuner_i2c_adapter' defined but not used [-Wunused-function] mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ Signed-off-by:
-
Hans Verkuil authored
Fix these compiler warnings that appeared after switching to gcc-5.1.0: drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_power': drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.power_count) ^ drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_streaming': drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.stream_count) ^ Signed-off-by: -
Hans Verkuil authored
Fix these compiler warnings that appeared after switching to gcc-5.1.0: drivers/media/i2c/s5k5baf.c: In function 's5k5baf_set_power': drivers/media/i2c/s5k5baf.c:1057:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on != state->power) ^ drivers/media/i2c/s5k6aa.c: In function 's5k6aa_set_power': drivers/media/i2c/s5k6aa.c:878:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == s5k6aa->power) { ^ drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function 's5c73m3_oif_set_power': drivers/media/i2c/s5c73m3/s5c73m3-core.c:1456:17: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] } else if (!on == state->power) { ^ Signed-off-by: -
Hans Verkuil authored
Fix typo. Signed-off-by:
-
Hans Verkuil authored
For these encodings the quantization range should be ignored, since there is only one possible Y'CbCr encoding. Signed-off-by:
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_BT2020_CONST_LUM. Signed-off-by:
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_BT2020. Signed-off-by:
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_SMPTE240M. Signed-off-by:
-
Hans Verkuil authored
Add a log_status function to the test pattern generator and use that in vivid. This simplifies debugging complex colorspace problems. Signed-off-by:
-
Philipp Zabel authored
Use the VIVID_WEBCAM_SIZES constant where appropriate and add a 1920x1080 pixel frame size setting with frame rates of 2 fps and 5 fps. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Hans Verkuil authored
You must use static inline otherwise you get these errors if CONFIG_OF is not defined: In file included from drivers/media/platform/soc_camera/soc_camera.c:39:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/atmel-isi.c:28:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/rcar_vin.c:36:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ Signed-off-by:Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
- 27 Apr, 2015 9 commits
-
-
Pavel Machek authored
Add device tree support for adp1653 flash LED driver. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Pavel Machek authored
Documentation for adp1653 bindings. Signed-off-by:
-
Sakari Ailus authored
Instead of parsing the link-frequencies property in the driver, let v4l2_of_alloc_parse_endpoint() do it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Sakari Ailus authored
The link-frequencies property is a variable length array of link frequencies in an endpoint. The array is needed by an increasing number of drivers, so it makes sense to add it to struct v4l2_of_endpoint. However, the length of the array is variable and the size of struct v4l2_of_endpoint is fixed since it is allocated by the caller. The options here are 1. to define a fixed maximum limit of link frequencies that has to be the global maximum of all boards. This is seen as problematic since the maximum could be largish, and everyone hitting the problem would need to submit a patch to fix it, or 2. parse the property in every driver. This doesn't sound appealing as two of the three implementations submitted to linux-media were wrong, and one of them was even merged before this was noticed, or 3. change the interface so that allocating and releasing memory according to the size of the array is possible. This is what the patch does. v4l2_of_alloc_parse_endpoint() is just like v4l2_of_parse_endpoint(), but it will allocate the memory resources needed to store struct v4l2_of_endpoint and the additional arrays pointed to by this struct. A corresponding release function v4l2_of_free_endpoint() is provided to release the memory allocated by v4l2_of_alloc_parse_endpoint(). In addition to this, the link-frequencies property is parsed as well, and the result is stored to struct v4l2_of_endpoint field link_frequencies. Signed-off-by:
-
Sakari Ailus authored
Zero the entire struct starting from bus_type. As more fields are added, no changes will be needed in the function to reset their value explicitly. Signed-off-by:
-
Sakari Ailus authored
The field is unused. Remove it. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 4.1-rc1 * tag 'v4.1-rc1': (11651 commits) Linux 4.1-rc1 x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue v4l: xilinx: fix for include file movement platform/chrome: chromeos_laptop - instantiate Atmel at primary address RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() Btrfs: prevent list corruption during free space cache processing toshiba_acpi: Do not register vendor backlight when acpi_video bl is available x86: fix special __probe_kernel_write() tail zeroing case crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA crypto: x86/sha512_ssse3 - fixup for asm function prototype change nios2: rework cache nios2: Add types.h header required for __u32 type ALSA: hda - fix headset mic detection problem for one more machine eth: bf609 eth clock: add pclk clock for stmmac driver probe blackfin: Wire up missing syscalls Btrfs: fix inode cache writeout ACPI / scan: Add a scan handler for PRP0001 ...
-
Linus Torvalds authored
-
Andy Lutomirski authored
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefa x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
