- 13 Mar, 2023 16 commits
-
-
Thomas Zimmermann authored
The cirrus driver maintains plane state, format and pitch, in it's device structure. Introduce a plane state for the primary plane to store the values. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
Inline the framebuffer size check into the primary plane's atomic_check cirrus_primary_plane_atomic_check(). No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-15-tzimmermann@suse.de
-
Thomas Zimmermann authored
Test a display mode against the available amount of video memory in struct drm_mode_config_funcs.mode_valid, which cirrus implements in cirrus_mode_config_mode_valid(). This helper tests display modes against device-wide limits. Remove the now-obsolete per-CRTC test. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
The DRM core implements a size check against the mode config's limits when creating a framebuffer. [1] Remove the unnecessary test from cirrus_fb_create() and remove the now-empty function. Create framebuffers with drm_gem_fb_create_with_dirty(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://elixir.bootlin.com/linux/v6.1/source/drivers/gpu/drm/drm_framebuffer.c#L287 # [1] Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-13-tzimmermann@suse.de
-
Thomas Zimmermann authored
The DRM core implements a format check when setting a framebuffer for a plane. [1] Remove the unnecessary test from cirrus_fb_create(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://elixir.bootlin.com/linux/v6.1/source/drivers/gpu/drm/drm_atomic.c#L629 # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
Inline cirrus_fb_blit_rect into its only caller. While at it, update the code to use IOSYS_MAP_INIT_OFFSET(), which is the ideomatic way of initializing struct iosys_map with an offset. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-11-tzimmermann@suse.de
-
Thomas Zimmermann authored
Enable damage clipping on the primary plane and iterate over small areas of reported framebuffer damage. Avoid the overhead of permanent full-screen updates that cirrus currently implements. This problem is indicated by the warning drm_plane_enable_fb_damage_clips() not called in the kernel's log. Without damage clipping, drivers do full updates of the screen area. This is costly as many screen updates, such as cursor movement or command-line input, only change a small portion of the output. Damage clipping allows renderers to inform drivers about the changed areas. With the damage information known, cirrus now iterates over a list of change areas and only flushes those to the hardware's scanout buffer. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace simple-KMS helpers with DRM's regular helpers for atomic modesetting. Avoids the mid-layer and the additional wrappers around GEM's shadow-plane helpers. Most of the simple-KMS code is just wrappers around regular atomic helpers. The conversion is therefore equivalent to pulling the simple-KMS helpers into cirrus and removing all the intermediate code and data structures between the driver and the atomic helpers. As the simple-KMS helpers lump primary plan, CRTC and encoder into a single data structure, the conversion to regular helpers allows to split modesetting from plane updates and handle each individually. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Move the primary plane's format and modifier arrays within the source file and adapt naming slightly. No functional changes. Done in preparation of converting cirrus to regular atomic helpers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Integrate the connector with the rest of the pipeline setup code. Move some helpers within the file and adapt naming slightly. No functional changes. Done in preparation of converting cirrus to regular atomic helpers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
Split cirrus_mode_set() into smaller functions that set the display mode, color format and scnaline pitch individually. Better reflects the design of the DRM modesetting pipeline. Done in preparation of converting cirrus to regular atomic helpers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Call drm_dev_enter() and drm_dev_exit() immediately after entering cirrus' DRM helper functions. Remove these calls from other functions. Each enter/exit block in the DRM helpers covers the full hardware update. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
Cirrus' blit helper reimplements code from the shared blit helper drm_fb_blit(). Use the helper instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Using components per pixel to describe a color format is obsolete. Use the format info and 4CC value instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
The calculation for the scanout-buffer blit offset is independent from the color format. In the one case where the current code uses fb->pitches[0] instead of cirrus->pitch, their values are identical. Hence merge all into a single line. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-2-tzimmermann@suse.de
-
Thomas Zimmermann authored
Backmerging to get v6.3-rc1 and sync with the other DRM trees. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
-
- 10 Mar, 2023 1 commit
-
-
Javier Martinez Canillas authored
There are DRM fourcc formats that have pixels smaller than a byte, but the conversion_buf_size() function assumes that pixels are a multiple of bytes and use the struct drm_format_info .cpp field to calculate the dst_pitch. Instead, calculate it by using the bits per pixel (bpp) and divide it by 8 to account for formats that have sub-byte pixels. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307215039.346863-1-javierm@redhat.com
-
- 09 Mar, 2023 10 commits
-
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230224221417.1712368-1-u.kleine-koenig@pengutronix.de
-
Thomas Hellström authored
Avoid printing an error message if eviction was interrupted by, for example, the user pressing CTRL-C. That may happen if eviction is waiting for something, like for example a free batch-buffer. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-6-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
Unexport ttm_global_swapout() since it is not used outside of TTM. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-5-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
New code is recommended to use the BIT macro instead of the explicit shifts. Change the older defines so that we can keep the style consistent with upcoming changes. v2: - Also change the value of the _PRIV_POPULATED bit (Christian König) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-4-thomas.hellstrom@linux.intel.com
-
Gerald Loacker authored
Use h/v-sync and pixel clock polarity flags for RGB output. For all other outputs this is already implemented. Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230302123949.957998-1-gerald.loacker@wolfvision.net
-
Jacob Keller authored
Use the overflow-protected struct_size() helper macro to compute the allocation size of the vop2 data structure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Heiko Stübner <heiko@sntech.de> Cc: David Airlie <airlied@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230223013533.1707706-1-jacob.e.keller@intel.com
-
Sascha Hauer authored
The Rockchip PLL drivers are currently table based and support only the most common pixelclocks. Discard all modes we cannot achieve at all. Normally the desired pixelclocks have an exact match in the PLL driver, nevertheless allow for a 0.1% error just in case. Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-4-s.hauer@pengutronix.deSigned-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-5-s.hauer@pengutronix.de
-
Sascha Hauer authored
This adds the PLL/phy settings to support higher resolutions like 4k@30. The values were taken from the Rockchip downstream Kernel. Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220926080435.259617-3-s.hauer@pengutronix.deTested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-3-s.hauer@pengutronix.deSigned-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-4-s.hauer@pengutronix.de
-
Sascha Hauer authored
The driver checks if the pixel clock of the given mode matches an entry in the mpll config table. At least for the Synopsys phy the frequencies in the mpll table are meant as a frequency range up to which the entry works, not as a frequency that must match the pixel clock. Return MODE_OK when the pixelclock is smaller than one of the mpll frequencies to allow for more display resolutions. Limit this behaviour to the Synopsys phy at the moment and keep the current behaviour of forcing exact pixelclock rates for the other phys until it has been sorted out how and if the vendor specific phys work with non standard clock rates. Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220926080435.259617-2-s.hauer@pengutronix.deTested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Tested-by: Dan Johansen <strit@manjaro.org> Link: https://lore.kernel.org/r/20230118132213.2911418-2-s.hauer@pengutronix.deSigned-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-3-s.hauer@pengutronix.de
-
Sascha Hauer authored
The different VOP variants support different maximum resolutions. Reject resolutions that are not supported by a specific variant. This hasn't been a problem in the upstream driver so far as 1920x1080 has been the maximum resolution supported by the HDMI driver and that resolution is supported by all VOP variants. Now with higher resolutions supported in the HDMI driver we have to limit the resolutions to the ones supported by the VOP. The actual maximum resolutions are taken from the Rockchip downstream Kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [dropped the vdisplay > height check after talking to Sascha, as according to the vendor code "Actually vop hardware has no output height limit" (from vendor commit "drm/rockchip: vop: get rid of max_output.height check") and the height-check broke the px30-minievb display] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230216102447.582905-2-s.hauer@pengutronix.de
-
- 07 Mar, 2023 7 commits
-
-
Konrad Dybcio authored
Add support for the Sony TD4353 JDI 2160x1080 display panel used in some Sony Xperia XZ2 and XZ2 Compact smartphones. Due to the specifics of smartphone manufacturing, it is impossible to retrieve a better name for this panel. This revision adds support for the default 60 Hz configuration, however there could possibly be some room for expansion, as the display panels used on Sony devices have historically been capable of >2x refresh rate overclocking. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230119163201.580858-2-konrad.dybcio@linaro.org
-
Konrad Dybcio authored
Add bindings for the display panel used on some Sony Xperia XZ2 and XZ2 Compact smartphones. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230119163201.580858-1-konrad.dybcio@linaro.org
-
Maya Matuszczyk authored
Note that this patch is 'heavily inspired' by orientation support in driver for Elida KD35T133 panel Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230213153816.213526-4-maccraft123mc@gmail.com
-
Maya Matuszczyk authored
Add KD50T048A MIPI-DSI panel, which is based on ST7701 chip. Not sure what else to add to this commit message. Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230213153816.213526-3-maccraft123mc@gmail.com
-
Maya Matuszczyk authored
Add compatible for 854x480 Elida KD50T048A panel, found in Odroid Go Super and Odroid Go Ultra Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230213153816.213526-2-maccraft123mc@gmail.com
-
Jiapeng Chong authored
The function dsi_read is defined in the dw-mipi-dsi-rockchip.c file, but not called elsewhere, so remove this unused function. drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:362:19: warning: unused function 'dsi_read'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3984Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230208023429.73696-1-jiapeng.chong@linux.alibaba.com
-
Deepak R Varma authored
According to Documentation/filesystems/sysfs.rst, the show() callback function of kobject attributes should strictly use sysfs_emit() instead of sprintf() family functions. So, make this change. Issue identified using the coccinelle device_attr_show.cocci script. Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y/+pDaHOgG1x8Py2@ubun2204.myguest.virtualbox.org
-
- 06 Mar, 2023 2 commits
-
-
Dmitry Osipenko authored
VirtIO-GPU got a new config option for disabling KMS. There were two problems left unnoticed during review when the new option was added: 1. The IS_ENABLED(CONFIG_DRM_VIRTIO_GPU_KMS) check in the code was inverted, hence KMS was disabled when it should be enabled and vice versa. 2. The disabled KMS crashed kernel with a NULL dereference in drm_kms_helper_hotplug_event(), which shall not be invoked with a disabled KMS. Fix the inverted config option check in the code and skip handling the VIRTIO_GPU_EVENT_DISPLAY sent by host when KMS is disabled in guest to fix the crash. Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Fixes: 72122c69 ("drm/virtio: Add option to disable KMS support") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230306163916.1595961-1-dmitry.osipenko@collabora.com
-
Carlo Caione authored
Relax a bit the supported modes list by including also 480x1920 and 400x1280. This was actually tested on real hardware and it works correctly. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230210-relax_dmt_limits-v2-1-318913f08121@baylibre.com
-
- 05 Mar, 2023 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS
-