The secure update driver does a sanity-check of the image size in
comparison to the size of the staging area in FLASH. Instead of
hard-wiring M10BMC_STAGING_SIZE, move the staging size to the
m10bmc_csr_map structure to make the size assignment more flexible.
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240402184925.1065932-1-peter.colberg@intel.comSigned-off-by: Lee Jones <lee@kernel.org>

As this chip was seen in several devices in the wild, add it.
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240404195423.666446-2-andreas@kemnade.infoSigned-off-by: Lee Jones <lee@kernel.org>

Drop unneeded parentheses for clarity and consistency.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20240407112445.503bcbc6@endymion.delvareSigned-off-by: Lee Jones <lee@kernel.org>

Use spi_sync_transfer() instead of hand-writing it.

It is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/7af920eb686b719cb7eb39c832e3ad414e0e1e1a.1712258667.git.christophe.jaillet@wanadoo.frSigned-off-by: Lee Jones <lee@kernel.org>

Add various "simple" syscon compatibles which were undocumented or
still documented with old text bindings.

apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb,
fsl,ls1088a-reset, marvell,armada-3700-cpu-misc,
mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and
mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use
already. Remove the old text binding docs for the others.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240402202413.757283-1-robh@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

Since the chip can power off the system, add the corresponding
functionality.
Based on https://github.com/kobolabs/Kobo-Reader/raw/master/hw/imx6sll-clara2e/kernel.tar.bz2Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240402111700.494004-3-andreas@kemnade.infoSigned-off-by: Lee Jones <lee@kernel.org>

As the PMIC can power off the system, add the corresponding property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240402111700.494004-2-andreas@kemnade.infoSigned-off-by: Lee Jones <lee@kernel.org>

Convert subdevices with just an interrupt and compatbile to
json-schema and wire up already converted subdevices.
RTC is available in all variants, so allow it unconditionally.
GPADC binding for TWL603X uses two different compatibles, so
specify just the compatible and do not include it.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240401081831.456828-1-andreas@kemnade.infoSigned-off-by: Lee Jones <lee@kernel.org>

scnprintf() never returns negative value, drop the respective dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-7-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Since platform_device_unregister() is NULL-aware, we don't need
to duplicate this check. Remove it and fold the rest of the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-6-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1
when creating a platform device.

No functional changes are intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-5-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Use platform_device_register_full() instead of open coding this
function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-4-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Instead of creating driver-specific device attributes with
sysfs_create_group() have device core do this by setting up dev_groups
pointer in the driver structure.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-3-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

There is no need to include and use entire ACPI stack in the driver.
Replace respective pieces by agnostic code. No functional change
indented.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240223195113.880121-2-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Some devices support MSI interrupts. Let's at least try to use them in
platforms that provide MSI capability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240312165905.1764507-1-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Merge branches 'ib-mfd-misc-pinctrl-regulator-6.10', 'ib-mfd-pinctrl-regulator-6.10' and 'ib-mfd-regulator-6.10' into ibs-for-mfd-merged

Add support for TPS65224 pinctrl and GPIOs to TPS6594 driver as they have
significant functional overlap.
TPS65224 PMIC has 6 GPIOS which can be configured as GPIO or other
dedicated device functions.
Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/0109018f2fdce15d-c13bd809-a11b-4202-9b7f-c9380d51b070-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add support for TPS65224 regulators (bucks and LDOs) to TPS6594 driver as
they have significant functional overlap. TPS65224 PMIC has 4 buck
regulators and 3 LDOs. BUCK12 can operate in dual phase.
The output voltages are configurable and are meant to supply power to the
main processor and other components.
Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/0109018f2fdcc305-3b817569-21b6-42a7-942c-8edbff3848f2-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add support for TPS65224 PFSM in the TPS6594 PFSM driver as they share
significant functionality.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/0109018f2fdc9dc4-db5a45c0-0148-48cc-8462-d1c5b577a4bd-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add functionality of the TPS65224 PMIC to the TPS6594 core driver. This
includes adding IRQ resource, MFD cells, and device initialization for
TPS65224.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/0109018f2fdc7df4-b986892b-9dac-4af2-90f5-57fd67ed154d-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add support for TPS65224 PMIC in TPS6594's SPI driver which has
significant functional overlap.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/0109018f2fdc6328-6d13785c-9832-471b-bdfe-fb1dac3bdc60-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add support for TPS65224 PMIC in TPS6594's I2C driver which has
significant functional overlap.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/0109018f2fdaecea-12513236-1059-4227-9078-7b3e0d447cc0-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

TPS65224 is a Power Management IC with 4 Buck regulators and 3 LDO
regulators, it includes additional features like GPIOs, watchdog, ESMs
(Error Signal Monitor), and PFSM (Pre-configurable Finite State Machine)
managing the state of the device.

In addition TPS65224 has support for 12-bit ADC and does not have RTC
unlike TPS6594.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0109018f2f26a14f-157bb3a2-2f9b-4653-a619-46e1feb8f229-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

In regmap_config use volatile_table instead of volatile_reg. This change
makes it easier to add support for TPS65224 PMIC.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/0109018f2f267f6e-3121fa42-4816-45f7-a96d-0d6b4678da5a-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Extend TPS6594 PMIC register and field definitions to support TPS65224
power management IC.

TPS65224 is software compatible to TPS6594 and can re-use many of the
same definitions, new definitions are added to support additional
controls available on TPS65224.
Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Link: https://lore.kernel.org/r/0109018f2f265d30-a87711fa-31d9-48db-b8cb-7109d0213e2e-000000@ap-south-1.amazonses.comSigned-off-by: Lee Jones <lee@kernel.org>

Add support for rk816 to the existing rk808 regulator driver.

The infrastructure of the driver can be re-used as is. A peculiarity for
this version is, that BUCK1/BUCK2 have a (common) bit which needs to
toggled after a voltage change to confirm the change. Regulator regmap
takes care of that by defining a apply_bit and apply_reg for those
regulators.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-6-knaerzche@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

rk808_set_suspend_voltage_range currently does not account the existence of
apply_bit/apply_reg.

This adds support for those in same way it is done in
regulator_set_voltage_sel_regmap and is required for the upcoming RK816
support
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-5-knaerzche@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

This adds support for RK816 to the exising rk805 pinctrl driver

It has a single pin which can be configured as input from a thermistor (for
instance in an attached battery) or as a gpio.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-4-knaerzche@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

This integrates RK816 support in the this existing rk8xx mfd driver.

This version has unaligned interrupt registers, which requires to define a
separate get_irq_reg callback for the regmap. Apart from that the
integration is straightforward and the existing structures can be used as
is. The initialization sequence has been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240416161237.2500037-3-knaerzche@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

Add DT binding document for Rockchip's RK816 PMIC
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-2-knaerzche@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

The X-Powers AXP717 is a typical PMIC from X-Powers, featuring four
DC/DC converters and 15 LDOs, on the regulator side.

Describe the chip's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-5-andre.przywara@arm.comSigned-off-by: Lee Jones <lee@kernel.org>

The AXP717a is a PMIC chip produced by X-Powers, it can be connected to
an I2C or RSB bus.

It's a rather complete PMIC, with many regulators, interrupts, an ADC and
battery charging functionality. It also offer USB type-C CC pin
handling.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C or RSB. This covers the regulator, interrupts and power key
devices for now.
Advertise the device using the new compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-4-andre.przywara@arm.comSigned-off-by: Lee Jones <lee@kernel.org>

The X-Powers AXP717 is a PMIC used on some newer Allwinner devices.
Among quite some regulators it features the usual ADC/IRQ/power key
parts, plus a battery charger circuit, and some newly introduced USB
type-C circuitry.
Like two other recent PMICs, it lacks the DC/DC converter PWM frequency
control register, that rate is fixed here as well.

Add the new compatible string, and add that to the list of PMICs without
the PWM frequency property.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-3-andre.przywara@arm.comSigned-off-by: Lee Jones <lee@kernel.org>

The registers to set the X-Powers AXP313 regulators are of course
"CONTROL" registers, not "CONRTOL" ones.

Fix the typo in the header file and in its users. No functional change.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://lore.kernel.org/r/20240310010211.28653-2-andre.przywara@arm.comSigned-off-by: Lee Jones <lee@kernel.org>

Pull EFI fixes from Ard Biesheuvel:

 - Fix logic that is supposed to prevent placement of the kernel image
   below LOAD_PHYSICAL_ADDR

 - Use the firmware stack in the EFI stub when running in mixed mode

 - Clear BSS only once when using mixed mode

 - Check efi.get_variable() function pointer for NULL before trying to
   call it

* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix panic in kdump kernel
  x86/efistub: Don't clear BSS twice in mixed mode
  x86/efistub: Call mixed mode boot services on the firmware's stack
  efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address

Pull x86 fixes from Thomas Gleixner:

 - Ensure that the encryption mask at boot is properly propagated on
   5-level page tables, otherwise the PGD entry is incorrectly set to
   non-encrypted, which causes system crashes during boot.

 - Undo the deferred 5-level page table setup as it cannot work with
   memory encryption enabled.

 - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
   to the default value but the cached variable is not, so subsequent
   comparisons might yield the wrong result and as a consequence the
   result prevents updating the MSR.

 - Register the local APIC address only once in the MPPARSE enumeration
   to prevent triggering the related WARN_ONs() in the APIC and topology
   code.

 - Handle the case where no APIC is found gracefully by registering a
   fake APIC in the topology code. That makes all related topology
   functions work correctly and does not affect the actual APIC driver
   code at all.

 - Don't evaluate logical IDs during early boot as the local APIC IDs
   are not yet enumerated and the invoked function returns an error
   code. Nothing requires the logical IDs before the final CPUID
   enumeration takes place, which happens after the enumeration.

 - Cure the fallout of the per CPU rework on UP which misplaced the
   copying of boot_cpu_data to per CPU data so that the final update to
   boot_cpu_data got lost which caused inconsistent state and boot
   crashes.

 - Use copy_from_kernel_nofault() in the kprobes setup as there is no
   guarantee that the address can be safely accessed.

 - Reorder struct members in struct saved_context to work around another
   kmemleak false positive

 - Remove the buggy code which tries to update the E820 kexec table for
   setup_data as that is never passed to the kexec kernel.

 - Update the resource control documentation to use the proper units.

 - Fix a Kconfig warning observed with tinyconfig

* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/64: Move 5-level paging global variable assignments back
  x86/boot/64: Apply encryption mask to 5-level pagetable update
  x86/cpu: Add model number for another Intel Arrow Lake mobile processor
  x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
  Documentation/x86: Document that resctrl bandwidth control units are MiB
  x86/mpparse: Register APIC address only once
  x86/topology: Handle the !APIC case gracefully
  x86/topology: Don't evaluate logical IDs during early boot
  x86/cpu: Ensure that CPU info updates are propagated on UP
  kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
  x86/pm: Work around false positive kmemleak report in msr_build_context()
  x86/kexec: Do not update E820 kexec table for setup_data
  x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'

Pull scheduler doc clarification from Thomas Gleixner:
 "A single update for the documentation of the base_slice_ns tunable to
  clarify that any value which is less than the tick slice has no effect
  because the scheduler tick is not guaranteed to happen within the set
  time slice"

* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation

Pull dma-mapping fixes from Christoph Hellwig:
 "This has a set of swiotlb alignment fixes for sometimes very long
  standing bugs from Will. We've been discussion them for a while and
  they should be solid now"

* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
  iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
  swiotlb: Fix alignment checks when both allocation and DMA masks are present
  swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
  swiotlb: Enforce page alignment in swiotlb_alloc()
  swiotlb: Fix double-allocation of slots due to broken alignment handling

Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.

Tested with QEMU and OVMF firmware.

Fixes: bad267f9 ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>