- 23 Feb, 2017 15 commits
-
-
Chris Wilson authored
A request is assigned a global seqno only when it is on the hardware execution queue. The global seqno can be used to maintain a list of requests on the same engine in retirement order, for example for constructing a priority queue for waiting. Prior to its execution, or if it is subsequently removed in the event of preemption, its global seqno is zero. As both insertion and removal from the execution queue may operate in IRQ context, it is not guarded by the usual struct_mutex BKL. Instead those relying on the global seqno must be prepared for its value to change between reads. Only when the request is complete can the global seqno be stable (due to the memory barriers on submitting the commands to the hardware to write the breadcrumb, if the HWS shows that it has passed the global seqno and the global seqno is unchanged after the read, it is indeed complete). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-9-chris@chris-wilson.co.uk
-
Chris Wilson authored
On reflection, we are only using the execute fence as a waitqueue on the global_seqno and not using it for dependency tracking between fences (unlike the submit and dma fences). By only treating it as a waitqueue, we can then treat it similar to the other waitqueues during submit, making the code simpler. Signed-off-by:
-
Chris Wilson authored
It had only one callsite and existed to keep the code clearer. Now having shared the wait-on-error between phases and with plans to change the wait-for-execute in the next few patches, remove the out of line wait loop and move it into the main body of i915_wait_request. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
Add ourselves to the gpu error waitqueue earlier on, even before we determine we have to wait on the seqno. This is so that we can then share the waitqueue between stages in subsequent patches. Signed-off-by:
-
Chris Wilson authored
Use a local variable to avoid having to type out the full name of the gpu_error wait_queue. Signed-off-by:
-
Chris Wilson authored
Move the companion functions next to each other. Signed-off-by:
-
Chris Wilson authored
Replace the global device seqno with one for each engine, and account for in-flight seqno on each separately. This is consistent with dma-fence as each timeline has separate fence-contexts for each engine and a seqno is only ordered within a fence-context (i.e. seqno do not need to be ordered wrt to other engines, just ordered within a single engine). This is required to enable request rewinding for preemption on individual engines (we have to rewind the global seqno to avoid overflow, and we do not have to rewind all engines just to preempt one.) v2: Rename active_seqno to inflight_seqnos to more clearly indicate that it is a counter and not equivalent to the existing seqno. Update functions that operated on active_seqno similarly. Signed-off-by:
-
Chris Wilson authored
When dma_fence_signal() is called, it sets a flag to indicate the fence is complete. Before the dma_fence is signaled, the seqno check will first be passed. During an unlocked check (such as inside a waiter), it is possible for the fence to be signaled even though the seqno has been reset (by engine wraparound). In this case the waiter will be kicked, but for an extra layer of protection we can check the persistent signaled bit from the fence. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170223074422.4125-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
This reverts commit 7ee68603 "drm/i915/dp: Ratelimit DP aux timeout messages" as although it successfully squelches the debug messages, when it does so it generates a warning instead. CI lights up orange with all the warnings! In its current incarnation DRM_DEBUG_RATELIMITED is not usable for us, and we need to first teach lib/ratelimit.c not to warn when used for debug messages. Fixes: 7ee68603 ("drm/i915/dp: Ratelimit DP aux timeout messages") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Ander Conselvan de Oliveira authored
Geminilake scalers can do 7x7 filtering for all supported input sizes, so it doesn't need the "high quality" mode programming, which was actually removed from that platform. v2: Split dev_priv parameter change out. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>, Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
Pass dev_priv to intel_atomic_setup_scalers(). The next patch will need a dev_priv pointer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
Geminilake can output two pixels per clock, and that affects the maximum scaling factor for its scalers. Take that into account and avoid the following warning: WARNING: CPU: 1 PID: 593 at drivers/gpu/drm/i915/intel_display.c:13223 skl_max_scale.part.129+0x78/0x80 [i915] WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock) Modules linked in: x86_pkg_temp_thermal i915 coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul prime_numbers crc32_pclmul drm ghash_clmulni_intel shpchp tpm_tis tpm_tis_core tpm nfsd authw CPU: 1 PID: 593 Comm: kworker/u8:3 Tainted: G W 4.10.0-rc8ander+ #330 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0035.B33.1702150552 02/15/2017 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 skl_max_scale.part.129+0x78/0x80 [i915] intel_check_primary_plane+0xa6/0xc0 [i915] intel_plane_atomic_check_with_state+0xd1/0x1a0 [i915] ? drm_printk+0xb5/0xc0 [drm] intel_plane_atomic_check+0x3d/0x80 [i915] drm_atomic_helper_check_planes+0x7c/0x200 [drm_kms_helper] intel_atomic_check+0xa5b/0x11a0 [i915] drm_atomic_check_only+0x353/0x600 [drm] ? drm_atomic_add_affected_connectors+0x10c/0x120 [drm] drm_atomic_commit+0x18/0x50 [drm] restore_fbdev_mode+0x14c/0x2a0 [drm_kms_helper] drm_fb_helper_restore_fbdev_mode_unlocked+0x34/0x80 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] intel_fbdev_set_par+0x1a/0x70 [i915] fbcon_init+0x582/0x610 visual_init+0xd6/0x130 do_bind_con_driver+0x1da/0x3c0 do_take_over_console+0x116/0x180 do_fbcon_takeover+0x5c/0xb0 fbcon_event_notify+0x772/0x8a0 ? __blocking_notifier_call_chain+0x35/0x70 notifier_call_chain+0x4a/0x70 __blocking_notifier_call_chain+0x4d/0x70 blocking_notifier_call_chain+0x16/0x20 fb_notifier_call_chain+0x1b/0x20 register_framebuffer+0x278/0x360 drm_fb_helper_initial_config+0x253/0x440 [drm_kms_helper] intel_fbdev_initial_config+0x18/0x30 [i915] async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x670 ? process_one_work+0x197/0x670 worker_thread+0x4e/0x490 kthread+0x101/0x140 ? process_one_work+0x670/0x670 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 v2: s/max_pixclk/max_dotclk/ (Ville) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
Geminilake has a third sprite plane (or fourth universal plane) that is independent from the cursor. Make sure that for_each_plane_id_on_crtc() is aware of that extra plane so that the watermark code takes it into account. Fixes: e9c98825 ("drm/i915/glk: Configure number of sprite planes properly") Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by:
-
Chris Wilson authored
Testing with concurrent GGTT accesses no longer show the coherency problems from yonder, commit 5bab6f60 ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell"). My presumption is that the root cause was more likely fixed by commit 3b5724d7 ("drm/i915: Wait for writes through the GTT to land before reading back"), along with the use of WC updates to the global gTT in commit 8448661d ("drm/i915: Convert clflushed pagetables over to WC maps". Given that the original symptoms can no longer be reproduced, time to remove the workaround. Testcase: igt/gem_concurrent_blit Signed-off-by:
-
Lyude authored
Right now this is just leaving a lot of spam in dmesg that makes real issues more difficult to debug. As well (as noted by the comment right above the DRM_DEBUG_KMS() call) this is normal behavior when there's nothing connected to the DisplayPort connector. Signed-off-by:Lyude <lyude@redhat.com>
-
- 22 Feb, 2017 8 commits
-
-
Chris Wilson authored
Setting retire=true is identical to using origin=ORIGIN_CS, so make the same simplification to intel_fb_obj_flush() as already employed for intel_fb_obj_invalidate(). Signed-off-by:
-
Chris Wilson authored
Flushing the cachelines for an object is slow, can be as much as 100ms for a large framebuffer. We currently do this under the struct_mutex BKL on execution or on pageflip. But now with the ability to add fences to obj->resv for both flips and execbuf (and we naturally wait on the fence before CPU access), we can move the clflush operation to a workqueue and signal a fence for completion, thereby doing the work asynchronously and not blocking the driver or its clients. v2: Introduce i915_gem_clflush.h and use a new name, split out some extras into separate patches. Suggested-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
-
Chris Wilson authored
Generalise the skip for physical and stolen objects by skipping anything we do not have a valid address for inside the sg. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
We have three different paths by which userspace wants to flush the display plane (i.e. objects with obj->pin_display). Use a common helper to identify those paths and to simplify a later change. v2: Include the conditional in the name, i915_gem_object_flush_if_display Signed-off-by:
-
Chris Wilson authored
For use in the next patch, take the current is-coherent helper and add it to i915_gem_object.h Signed-off-by:
-
Chris Wilson authored
The change_domain tracepoint has been inaccurate for a few years - it doesn't fully capture the domains, especially with userspace bypassing them. It is defunct, misleading and time to be removed. Signed-off-by:
-
Chris Wilson authored
Handling the dynamic charp module parameter requires us to copy it for the error state, or remember to lock it when reading (in case it used with 0600). v2: Use __always_inline and __builtin_strcmp Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chuanxiao Dong authored
When not using GuC submission, the ring buffer size for GVT context is 512KB which is the max size. When switching to GuC submission, the ring buffer size is required to be less than 16KB. So use the GVT context default ring buffer size if GuC submission is enabled. Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170216063639.GA17107@intel.comReviewed-by:
-
- 21 Feb, 2017 10 commits
-
-
Tvrtko Ursulin authored
It is useful to provide this info to match the one provided in the request tracepoints. Signed-off-by:
-
Tvrtko Ursulin authored
Two new tracepoints placed at the call sites where requests are actually passed to the GPU enable userspace to track engine utilisation. These tracepoints are only enabled when the DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option is enabled. v2: Fix compilation with !CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS. v3: Name global seqno consistently across tracepoints. v4: Remove port info from request out tracepoint. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
i915_gem_ring_notify is more appropriate since we do not have the request information at this point, but it is simply a signal from the engine that some request has been completed. v2: * Always trace and log if there were any waiters. * Rename to intel_engine_notify. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
These new tracepoints are emitted once the request is ready to be submitted to the GPU and once the request is about to be submitted to the GPU, respectively. Former condition triggers as soon as all the fences and dependencies have been resolved, and the latter once the backend is about to submit it to the GPU. New tracepoint are enabled via the new DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option which is disabled by default to alleviate the performance impact concerns. v2: Move execute tracepoint to __i915_gem_request_submit. (Chris Wilson) Signed-off-by: -
Tvrtko Ursulin authored
Tracepoint is not used and won't be suitable for its replacement. Signed-off-by:
-
Tvrtko Ursulin authored
Provide the same information as the other request event classes. v2: Pass in flags so we can properly report the blocking status. (Chris Wilson) v3: Log hex with 0x prefix for clarity. v4: Derive blocking status from flags. (Chris Wilson) Signed-off-by: -
Tvrtko Ursulin authored
Rename it to i915_gem_request_queue and fix the logged info equivalent to the i915_gem_request even class. Also moved it a bit further apart from the i915_gem_request_add tracepoint since they otherwise provide similar information too close in time. v2: Remove sw fence singalling. We will rely on the soon to come GuC scheduling backend to enable that. (Chris Wilson) v3: Log hex with 0x prefix for clarity. Signed-off-by: -
Tvrtko Ursulin authored
At the moment only the global seqno is logged which is not set until the request is ready for submission. Add the per-contex seqno and the context hardware id which are both interesting data points. Signed-off-by:
-
Tvrtko Ursulin authored
Compact the name of the macro and reg_state variable, and cache some data in local variables to make the function more compact and more readable. v2: Fixup some checkpatch warnings. Signed-off-by:
-
Chris Wilson authored
Replace the calls to ww_mutex_lock(&resv->lock) with the helper reservation_object_lock(resv) and similarly for unlock. Signed-off-by:
-
- 20 Feb, 2017 7 commits
-
-
Chris Wilson authored
The hardware requires that the tail pointer only advance in qword units, so assert that the value we write is aligned to qwords, and similarly enforce this restriction onto the request->tail. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Imre Deak authored
Verify that the refcount of all power wells match their HW enabled state at the end of modeset HW state readout. Also add documentation on how the reference count for each power well is supposed to be acquired during initialization and HW state readout. Suggested by Ander. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Atm, power wells that BIOS has enabled, but which we don't explicitly enable during power domain initialization would get disabled as we clear the BIOS request bit in the given power well sync_hw hook. To prevent this copy over any set request bits in the BIOS request register to the driver request register and clear the BIOS request bit only afterwards. This doesn't make a difference now, since we enable all power wells during power domain initialization. A follow-up patchset will add power wells for which this isn't true, so fix up the inconsistency. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Atm, in the power well sync_hw hook we are clearing all BIOS request bits, not just the one corresponding to the given power well. This could turn off an unrelated power well inadvertently if it didn't have a request bit set in the driver request register. This didn't cause a problem so far, since we enabled all power wells explicitly before clearing the BIOS request register. A follow-up patchset will add power wells that won't get enabled this way, so fix up the inconsistency. Note that this patch only makes the clearing of the BIOS req register more logical. Power wells without a reference would still get disabled by the end of power domain initialization, that is fixed by the next patch. v2: - Clarify in the commit log that this patch doesn't address the case of power wells without a reference. (Ander) Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
So far the sync_hw hook wasn't called for power wells not belonging to any power domain, that is the GEN9 PW1 and MISC_IO power wells. This wasn't a problem so far since the goal of the sync_hw hook - to clear the corresponding BIOS request bit - was guaranteed by clearing the whole BIOS request register elsewhere. This will change with the next patch, so fix up the inconsistency. While at it clean up the power well iterator helpers and move them to the rest of iterators. v2: - Clean up the power well iterator helpers. (Ander) - Move the helpers to i915_drv.h. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Doing an explicit enable/disable in the power well sync_hw hook based on the power well's reference count is redundant, since by the time these hooks are called all the power wells are enabled and have a reference. So remove the redundant toggling. This is needed by a follow-up patchset that adds power wells which we can't enable/disable during power domain initialization and so want to preserve their state until modeset init time. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The uncached mmio is sufficient to queue the mmio writes without raising forcewake. The forced flush along with acquiring forcewake from the posting read is not required for adjusting the RPS frequency. Signed-off-by:
Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
