- 05 Aug, 2015 1 commit
-
-
git://codeaurora.org/quic/kernel/agross-msmOlof Johansson authored
Qualcomm ARM64 Updates for v4.3 * Add BLSP and required pinctrl info for MSM8916 * Add SDHC aliases and nodes for MSM8916 * Add USB nodes for MSM8916 * Add APQ8016 SBC specific USB configuration * Add APQ8016 LED configuration * tag 'qcom-arm64-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm: arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins arm64: dts: qcom: Add msm8916 USB configuration nodes arm64: dts: qcom: Add msm8916 sdhci configuration nodes arm64: dts: qcom: Add msm8916 BLSP device nodes arm64: dts: qcom: Extend msm8916 pinctrl device coverage Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 29 Jul, 2015 5 commits
-
-
Ray Jui authored
The current iProc BCMA front-end driver can only work on ARM32 based platforms; therefore its config option in Kconfig should be changed to reflect that. This fixes arm64 allmodconfig build failure when compiling the the iProc BCMA driver that contains struct pci_sys_data that is arm32 specific Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Ray Jui authored
Add Broadcom NS2 device tree binding document. Also add initial device tree dtsi for Broadcom North Star 2 (NS2) SoC and board support for NS2 SVK board Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Ray Jui authored
This patch adds support to Broadcom's iProc family of arm64 based SoCs in the arm64 Kconfig and defconfig files Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Ray Jui authored
Allow Broadcom iProc PCIe core driver to be compiled for ARM64 Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Ray Jui authored
PCI: iproc: Add arm64 support Add arm64 support to the iProc PCIe driver. Note that on arm32, bus->sysdata points to the arm32-specific pci_sys_data struct, and pci_sys_data.private_data contains the iproc_pcie pointer. For arm64, there's nothing corresponding to pci_sys_data, so we keep the iproc_pcie pointer directly in bus->sysdata. In addition, arm64 does IRQ mapping in pcibios_add_device(), so it doesn't need pci_fixup_irqs() as arm32 does. Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 28 Jul, 2015 8 commits
-
-
Ivan T. Ivanov authored
APQ8016 SBC board have 6 user controllable LED's. Add following devices: LED1 green LED triggered by system heartbeat. LED2 green LED triggered by access to eMMC device. LED3 green LED triggered by access to SD card. LED4 green LED no trigger assigned. LED5 yellow LED triggered by access to WLAN. LED6 blue LED triggered by access to Bluetooth. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Ivan T. Ivanov authored
USB2513B HUB reset line is connected to PMIC GPIO3 not GPIO1. Fix TC7USB40MU Dual SPDT Switch select input line control, which is connected to PMIC GPIO4 not GPIO2 and disable the pin. It is not used for now. Remove user LEDs definitions, because they clash with above numbers. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Ivan T. Ivanov authored
Hogging pins from pinctrl driver prevents client drivers to probe. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Ivan T. Ivanov authored
Add Host, Device and OTG configuration nodes. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Srinivas Kandagatla authored
Add sdhci1 and sdhci2 device configuration nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Ivan T. Ivanov authored
Add device nodes for SPI1, SPI2, SPI3, I2C4, SPI5, SPI6 and BAM(DMA) engine connected to them. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
Ivan T. Ivanov authored
Create separate file for MSM8916 pinctrl default/sleep pins state definitions. Move in UART2 states and add SPI, I2C and SDC configurations. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
-
https://github.com/mbgg/linux-mediatekOlof Johansson authored
- arm64: dts: mediatek: add mt6795 support - Document: DT: Add bindings for mediatek MT6795 SoC Platform - arm64: dts: mediatek: Add MT8173 MMC dts - arm64: dts: mt8173: Add afe device node - arm64: dts: mt8173-evb: Add PMIC support - dts: mt8173-evb: Add da9211 to i2c1 - ARM: dts: mt8173: support arm64 cpuidle-dt - ARM64: MediaTek MT8173: Add SCPSYS device node - arm64: dts: mt8173: Add I2C device node - arm64: dts: mt8173: Add watchdog device node - arm64: dts: mt8173: Add PMIC wrapper device node - arm64: dts: mt8173: Use real clock for UARTs - arm64: dts: mt8173: Add clock controller device nodes * tag 'v4.2-next-arm64' of https://github.com/mbgg/linux-mediatek: arm64: dts: mediatek: add mt6795 support Document: DT: Add bindings for mediatek MT6795 SoC Platform arm64: dts: mediatek: Add MT8173 MMC dts arm64: dts: mt8173: Add afe device node arm64: dts: mt8173-evb: Add PMIC support dts: mt8173-evb: Add da9211 to i2c1 ARM: dts: mt8173: support arm64 cpuidle-dt ARM64: MediaTek MT8173: Add SCPSYS device node arm64: dts: mt8173: Add I2C device node arm64: dts: mt8173: Add watchdog device node arm64: dts: mt8173: Add PMIC wrapper device node arm64: dts: mt8173: Use real clock for UARTs arm64: dts: mt8173: Add clock controller device nodes Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 23 Jul, 2015 2 commits
-
-
Mars Cheng authored
This adds basic chip support for MT6795 SoC Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Mars Cheng authored
This adds DT binding documentation for Mediatek MT6795. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
- 21 Jul, 2015 1 commit
-
-
Eddie Huang authored
Add node mmc0 ~ mmc3 for mt8173.dtsi Add node mmc0, mmc1 for mt8173-evb.dts Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
- 20 Jul, 2015 1 commit
-
-
Olof Johansson authored
They're not relative. My builder failed silently and never notified me of the error. Sigh. Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 17 Jul, 2015 6 commits
-
-
Koro Chen authored
This adds afe (audio front end) device node to the MT8173 dtsi file. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Heiko Stübner authored
In terms of peripherals the rk3368 is quite similar to the rk3288, which makes it possible to have a lot basic components working in the first go. More to follow once I tracked down all the tiny differences that still exist in some parts. With these dts files, the R88 board is able to boot from an attached usb device and most likely from its emmc too, if the emmc uses a standard partition table instead of Rockchip's own one - the emmc itself is detected correctly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge in dependent stable branch with clk driver for RK3368, needed for the dt binding header files. * depends/clk-rk3368: clk: rockchip: add rk3368 clock controller clk: rockchip: add missing include guards clk: rockchip: add dt-binding header for rk3368 dt-bindings: add documentation of rk3668 clock controller clk: rockchip: define the inverters of rk3066/rk3188 and rk3288 clk: rockchip: fix issues in the mmc-phase clock clk: rockchip: add support for phase inverters clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variant clk: rockchip: protect register macros against multipart values clk: rockchip: fix faulty vip parent name on rk3288 clk: rockchip: rk3288: add CLK_SET_RATE_PARENT to sclk_mac Signed-off-by: Olof Johansson <olof@lixom.net>
-
Heiko Stübner authored
Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Heiko Stübner authored
The rk3368 is Rockchip's first ARM64 soc, build around 8 Cortex-A53 cores. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Let's move out the platform Kconfig entries to a separate file, since these changes usually get moved through arm-soc instead of the arm64 arch tree, and this will lead to fewer conflicts Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
-
- 15 Jul, 2015 1 commit
-
-
Chunyan Zhang authored
Since ETMv4 driver has been merged, this patch adds ETM nodes for SC9836, and four funnel input ports to connect with ETM output ports. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 12 Jul, 2015 11 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
Al Viro authored
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
-
- 11 Jul, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ...
-