checkpatch spotted a few spaces vs tabs errors, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpath spotted a few errors in this file, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpath spotted a few stylistic errors, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpath spotted a few stylistic errors fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Atzm Watanabe says:

====================
packet: deliver VLAN TPID to userspace

This patchset enables userspace to get VLAN TPID as well as the VLAN TCI.

After the 802.1AD support, userspace packet receivers (packet dumper,
software switch, and the like) need how to know VLAN TPID in order to
reconstruct original tagged frame.

v4: Simply use sizeof(tp_padding) for zeroing the padding bytes,
    commented by David Laight.
    Use __u16 for tp_vlan_tpid in tpacket_hdr_variant1,
    commented by Daniel Borkmann.

v3: Add a definition which indicates whether tp_vlan_tpid is valid.
    Explicitly define pad bytes for tpacket{2,3}_hdr and pick the area
    for tp_vlan_tpid from the definition.  Commented by David Laight.

v2: Add BUILD_BUG_ON() to make current aligned size of
    struct tpacket{2,3}_hdr clear.  Commented by Ben Hutchings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables userspace to get VLAN TPID as well as the VLAN TCI.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
Explicitly defining and zeroing the gap of this makes additional changes
easier.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
We may add members to them until current aligned size without forcing
userspace to call getsockopt(..., PACKET_HDRLEN, ...).
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rasesh Mody says:

====================
bna: Update the Driver to v3.2.23.0

This patch set consists of feature additions like s/w timestamping support,
multi-buffer RX, firmware patch simplification, enhancements for RX filters,
RX processing changes, bug fixes and updates the firmware version to v3.2.3.0.
The patch set addressed the review commnets recieved.

This patch set updates the BNA driver to v3.2.23.0 and was tested against
net-next 3.12.0-rc6 kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch includes change to enable firmware patch simplication feature.
This feature is targeted to address the requirement to have independent patch
release for firmware. Prior to the 3.2.3.0 firmware, releasing a patch fix for
firmware would require changes to bna driver, to use new firmware images.
However with these changes, if the new firmware is flashed on to the Adapter,
the driver will use the new firmware after checking the patch release byte in
the firmware version.

Update the f/w version to 3.2.3.0
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Store the length of the skb buffer mapped along with the handle and use it
   while unmapping the buffer.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - When bnad_setup_tx() returns NULL, the error is NOT returned to the caller.
   The caller will incorrectly assume success. So Return ENOMEM when bna_tx_create()
   fails.
 - If bnad_tx_msix_register() fails, call bna_tx_destroy() to free tx & to NULL
   the bnad reference to tcb.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we already check to see whether the BNAD_TXQ_TX_STARTED cleared.
But if the tcb structure which contains this flag is also already freed by that
time, we would dereference the NULL pointer. This patch is to check tcb for NULL
pointer, before dereferencing it.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Valid bit check for completion needs read fence, so that it does not get
reordered with other loads.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change Details:
 - Prefetch header in GRO path. This reduces napi_frags_skb time from 9% to 5%.
 - Changed the configurable limit of RxQ depth to 16384 (was 2048).
 - bnad_rx_unmap_q elements are cachealigned.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CT2 HW supports multi-buffer Rx. This patch provides the necessary changes
for bnad to use multi-buffer Rx feature. For BNAD, multi-buffer Rx is by
default enabled when MTU is > 4096. For >4096 MTU, q0 data/large buffers are of
2048 size. As the resource requirements of multi-buffer Rx are different new Rx
needs to be created to use this feature. ASIC posts multiple completions if
frame exceeds buffer size. The last completion is marked with EOP flag.
 - Separate HQ and DQ enums for resource allocations and configurations.
 - rx_config and rxq structure changes to pass the correct info from bnad.
 - DQ depth need not be same as HQ depth. So CQ depth is adjusted accordingly.
 - Rx CFG frame size is taken from configured MTU.
 - Rx q0 buffer size is configured from bnad s rx_config when multi-buffer is
   enabled.
 - Poll for entire frame completion.
 - Once EOP completion is received gather the number of vectors used by the
   frame to submit it to the stack.
 - Changed MTU to frame size wherever necessary.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change Details:
 - Added bna_rx_ucast_listset() for synchronous ucast listadd operation.
 - Clear mac->handle before adding it to free_q.
 - bnad_set_rx_mode() rewritten. bnad_set_rx_mode() adds the MACs in uc_list
   to UCAM. If it exceeds the max supported, DEFAULT mode is turned on. If
   MCAM limit is exceeded, ALLMULTI mode is turned on.
 - Clear CF flags, check for the new mode and reprogram the Rx approach.
 - Added bnad_set_rx_ucast_fltr() and bnad_set_rx_mcast_fltr().
 - Check for IFF_PROMISC to set the correct mode.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change Details:
 - bna_rx_mcast_listset() API first looks at free_q only and not at other
   pending Qs rendering it non-deterministic of giving an upper limit.
   Modify bna_rx_mcast_listset() implementation to not use only half of the
   limit.
 - Allocate and initialize queue for deleting
 - Segregate the adding and deleting process by using separate queues.
 - The filter framework in bna does not let adding addresses to its max capacity
   due to asynchronous operations involved.
   Provide a synchronous option to set a given list.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add APIs to set and get IOC currnet fw state and alt IOC fw state
 - bfa_ioc_ct_set_cur_ioc_fwstate()
 - bfa_ioc_ct_get_cur_ioc_fwstate()
 - bfa_ioc_ct_set_alt_ioc_fwstate()
 - bfa_ioc_ct_get_alt_ioc_fwstate()
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Invoke skb_tx_timestamp() API just before invoking txq_doorbell()
 - Add ethtool (-T) support
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

For OSA devices that support the QUERY_CARD_INFO command, supply
accurate data based on the card type, port mode and link speed
via the 'ethtool' interface.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

state checking in conn_action_txdone() is inconsistent.
This patch makes it consistent and issues a trace message
if an unexpected state is detected for the netiucv device.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Valgrind found that extracted labels that are passed from the lexer
weren't freed upon exit. Therefore, add a small helper function that
walks label tables and frees them. Since also NULL can be passed to
free(3), we do not need to take care of that here. While at it, fix
up a spacing error in bpf_set_curr_label().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must not leave the socket intact in bpf_runnable(). The socket
is used to test if the filter code is being accepted by the kernel
or not. So right after we do the setsockopt(2), we need to close
it again.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manish Chopra says:

====================
qlcnic: Refactoring and enhancements

This patch series includes follwing changes

* Refactor DCBX code. Do not allow DCBX operations for VFs
* Issue INIT_NIC mailbox command only once
* Refactor initialize nic code path
* Allow configuration for single TX/RX queue
* VLAN enhancement for 84xx adapters
* Support for 16 virtual NIC functions for 84XX series adapters

Please apply to net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend virtual NIC functions from 8 to 16 for 84xx adapter.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Support multiple VLANs on 84xx VF devices
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Allow user to set sigle Tx/Rx queue in MSI-x mode,
  for ALL supported adapters.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Change function name from qlcnic_83xx_register_nic_idc_func to
  qlcnic_83xx_initialize_nic
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o DCB AEN registration was reissuing INIT_NIC command. Instead, club
  all options of INIT NIC command and issue this command only once.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o These operations will be supported only through PFs (SR-IOV and non-SR-IOV).
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Miscellaneous changes for 3.14:

1. Add more information to some WARN messages.
2. Refactor pushing of RSS configuration, from Andrew Rybchenko.
3. Refactor handling of automatic (device address list) vs manual (RX
NFC) MAC filters.
4. Implement clearing of manual RX filters on EF10 when ntuple offload
is disabled.
5. Remove definitions that are unused since the RX buffer allocation
changes, from Andrew Rybchenko.
6. Improve naming of some statistics, from Shradha Shah.
7. Add statistics for PTP support code.
8. Fix insertion of RX drop filters on EF10.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
net: Add rxhash utility hash functions

v3:

There's really nothing specific about rxhash that constrains
it to be a value just for these receive path. Drop the 'rx'
part in utility functions, including skb_get_rxhash. In subsequent
patches, we can change the rxhash and l4_rxhash names also, as
well as abstracting out the interface to the hash.

Added comments about hash types per feedback.

In this version I'm omitting the changes to drivers to make the
patch set manageable. Will add those changes in followup pathes.

-----
This patch series introduce skb_set_rxhash and skb_clear_rxhash
which are called to set the rxhash (from network drivers) and
to clear the rxhash. This API should be used instead of updating
fields in the skbuff directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds skb_copy_hash to copy rxhash and l4_rxhash from one skb to another.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>