- 22 Sep, 2021 6 commits
-
-
Hannes Reinecke authored
The acornscsi driver has a config option to enable tagged queuing, but this option gets disabled in the driver itself with the comment 'needs to be debugged'. As this is a _really_ old driver I doubt anyone will be wanting to invest time here, so remove the tagged queue vestiges and make our lives easier. [jpg: Use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.comSigned-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The driver is attempting to allocate a tag internally which is a no-go with blk-mq. Switch the driver to use the request tag and kill usage of scmd->tag and scmd->device->current_tag. [jpg: Change to use scsi_cmd_to_rq()] Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Dmitry Bogdanov authored
In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb83 ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Bart Van Assche authored
A command tag is passed as the second argument of the __ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler() instead of a bitmask. Fix this by passing a bitmask as argument instead of a command tag. Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org Fixes: a45f9371 ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Can Guo <cang@codeaurora.org> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
This patch addresses the following Coverity report about the zno * sdkp->zone_blocks expression: CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression zno * sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type sector_t (64 bits, unsigned). Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org Fixes: 5795eb44 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Adrian Hunter authored
This reverts commit a113eaaf. There are a couple of issues with the commit: 1. It causes deadlocks. 2. It causes the shost->eh_cmd_q list of failed requests not to be processed, ever. So revert it. 1. Deadlocks The SCSI error handler runs with requests blocked beginning when scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through scsi_error_handler() callback ->eh_strategy_handler() until scsi_restart_operations() is called. By setting eh_strategy_handler to ufshcd_err_handler, the patch changed the UFS error handler to run with requests blocked, including PM requests, for the entire run of the error handler. That conflicts with UFS error handler existing synchronization with UFS device PM operations. The UFS error handler synchronizes with runtime PM by doing pm_runtime_get_sync() prior to blocking requests itself. It synchronizes with system PM by use of hba->host_sem, again before blocking requests itself. However, if requests are already blocked, then PM operations will block. So: the UFS error handler blocks waiting on PM + PM blocks waiting on SCSI PM requests to process or fail + PM requests are blocked waiting on error handling to finish = deadlock This happens both for runtime PM and system PM. Prior to the patch, these deadlocks could not happen even if SCSI error handling was running, because the presence of requests in shost->eh_cmd_q would mean the queues could not be suspended, which would mean that, should the UFS error handler run at the same time, it would not need to wait for PM or vice versa. Please note these scenarios are not just theoretical, they were found during testing on a Samsung Galaxy Book S. 2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed requests, as all other eh_strategy_handler's do except UFS error handler. Refer for example: scsi_unjam_host(), ata_scsi_error() and sas_scsi_recover_host(). Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com Fixes: a113eaaf ("scsi: ufs: Synchronize SCSI and UFS error handling") Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
- 14 Sep, 2021 21 commits
-
-
Zenghui Yu authored
device_initialize() is used to take a refcount on the device. However, put_device() is not called during device teardown. This leads to a leak of private data of the driver core, dev_name(), etc. This is reported by kmemleak at boot time if we compile kernel with DEBUG_TEST_DRIVER_REMOVE. Fix memory leaks during unregistration and implement a release function. Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com Fixes: ead09dd3 ("scsi: bsg: Simplify device registration") Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Heiner Kallweit authored
sd_spinup_disk() is a little bit noisy after commit 848ade90 ("scsi: sd: Do not exit sd_spinup_disk() quietly"): scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Media removed, stopped polling sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: [sda] Media removed, stopped polling There's not really a benefit in printing the same message multiple times. Therefore print it only if media_present was previously set. Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.comReviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Adrian Hunter authored
Intel LKF can experience link errors. Make fixes to increase link stability, especially when switching to high speed modes. Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com Fixes: b2c57925 ("scsi: ufs: ufs-pci: Add support for Intel LKF") Cc: stable@vger.kernel.org Signed-off-by:
-
Colin Ian King authored
There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
There are a few statements where the indentation is not correct, clean these up. Link: https://lore.kernel.org/r/20210902223643.56979-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a literal string. Fix it. Link: https://lore.kernel.org/r/20210826115714.11844-1-colin.king@canonical.comSigned-off-by:
-
Jens Axboe authored
There's little point in keeping this one separately maintained these days, so just remove the entry and it'll fall under the SCSI subsystem where it belongs. Link: https://lore.kernel.org/r/c5e12bd1-10de-634c-d6b3-dac79ed01af5@kernel.dkSigned-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
jing yangyang authored
WARNING !A || A && B is equivalent to !A || B This issue was detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20210820030805.12383-1-jing.yangyang@zte.com.cnReported-by:
Zeal Robot <zealci@zte.com.cn> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
-
Helge Deller authored
Drop retrieve_from_waiting_list() to avoid this warning: drivers/scsi/ncr53c8xx.c:8000:26: warning: ‘retrieve_from_waiting_list’ defined but not used [-Wunused-function] Link: https://lore.kernel.org/r/YTfS/LH5vCN6afDW@ls3530 Fixes: 1c22e327 ("scsi: ncr53c8xx: Remove unused code") Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
James Smart authored
Smatch checker reported the following error: drivers/base/power/sysfs.c:833 dpm_sysfs_remove() warn: sleeping in atomic context With a calling sequence of: efct_lio_npiv_drop_nport() <- disables preempt -> fc_vport_terminate() -> device_del() -> dpm_sysfs_remove() Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call while holding a lock w/ ipl raised. It is unnecessary to hold the lock over this call, shift where the lock is taken. Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.comReported-by:Dan Carpenter <dan.carpenter@oracle.com> Co-developed-by:
Ram Vegesna <ram.vegesna@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Maurizio Lombardi authored
Commit 356ba2a8 ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8 ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.comReviewed-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Naohiro Aota authored
Reporting zones on a SCSI device sometimes fail with the following error: [76248.516390] ata16.00: invalid transfer count 131328 [76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates that buffer size is not aligned to SECTOR_SIZE. This happens when the __vmalloc() failed. Consider we are reporting 4096 zones, then we will have "bufsize = roundup((4096 + 1) * 64, SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves the bufsize to 131328, which is no longer aligned to SECTOR_SIZE. Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix the comment as well. Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com Fixes: 23a50861 ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()") Cc: stable@vger.kernel.org # 5.5+ Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
-
Ming Lei authored
After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.comReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Sreekanth Reddy authored
Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.comReviewed-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Baokun Li authored
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f345 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Signed-off-by:
-
ChanWoo Lee authored
The following parameters are not used in the function. Remove them. *func(): ufshpb_set_hpb_read_to_upiu -> struct ufshpb_lu *hpb -> u32 lpn Link: https://lore.kernel.org/r/20210901025617.31174-1-cw9316.lee@samsung.comReviewed-by:
Daejun Park <daejun7.park@samsung.com> Reviewed-by:
ChanWoo Lee <cw9316.lee@samsung.com> Signed-off-by:
-
Chi Minghao authored
Fix the following coccicheck REVIEW: ./drivers/scsi/lpfc/lpfc_scsi.c:1498:9-12 REVIEW Unneeded variable Link: https://lore.kernel.org/r/20210831114058.17817-1-lv.ruyi@zte.com.cnReported-by:
Zeal Robot <zealci@zte.com.cm> Reviewed-by:
Chi Minghao <chi.minghao@zte.com.cn> Signed-off-by:
-
James Smart authored
The Kernel test robot flagged the following warning: ".../lpfc_init.c:7788:35: error: 'struct lpfc_sli4_hba' has no member named 'c_stat'" Reviewing this issue highlighted that one of the recent patches caused the driver to no longer compile cleanly if CONFIG_DEBUG_FS is not set. Correct the different areas that are failing to compile. Link: https://lore.kernel.org/r/20210908050927.37275-1-jsmart2021@gmail.com Fixes: 02243836 ("scsi: lpfc: Add support for the CM framework") Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Build-tested-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
-
James Smart authored
The kernel test robot reported the following sparse warning: ".../lpfc_els.c:3984:25: sparse: sparse: cast from restricted __be16" For the error being flagged, using be32_to_cpu() on a be16 data type, it was simple enough. But a review of other elements and warnings were also evaluated. This patch corrected several items in the original patch: - Using be32_to_cpu() on a be16 data type - cpu_to_le32() used on a std uint32_t (CPU) data type. Note: This is a byte array, but stored in LE layout by hardware at 32-bit boundaries. So it possibly needed conversion. - Using cpu_to_le32() on a std uint16_t and assigned to a char typeA - Using le32_to_cpu() on a le16 type - Missing cpu_to_le16() on an assignment Link: https://lore.kernel.org/r/20210830231243.6227-1-jsmart2021@gmail.com Fixes: 9064aeb2 ("scsi: lpfc: Add EDC ELS support") Reported-by:
kernel test robot <lkp@intel.com> Co-developed-by:
-
James Smart authored
The kernel test robot flagged an warning for ".../efc_device.c:932:6: warning: cast to smaller integer type 'enum efc_nport_topology' from 'void *'" For the topology events, the "arg" field is generically defined as a void * and is used to pass different arguments. Most of the arguments are pointers to data structures. But for the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event, the argument is an enum value, and the code is typecasting the void * to an enum generating the warning. Fix by converting the EFC_EVT_NPORT_TOPOLOGY_NOTIFY event to pass a pointer to the enum, thus it's a straight-forward pointer dereference in the event handler. Link: https://lore.kernel.org/r/20210830231050.5951-1-jsmart2021@gmail.com Fixes: 202bfdff ("scsi: elx: libefc: FC node ELS and state handling") Reported-by:
-
Nathan Chancellor authored
Clang + -Wimplicit-fallthrough warns: drivers/scsi/st.c:3831:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/scsi/st.c:3831:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's -Wimplicit-fallthrough is a little bit more pedantic than GCC's, requiring every case block to end in break, return, or fallthrough, rather than allowing implicit fallthroughs to cases that just contain break or return. Add a break so that there is no more warning, as has been done all over the tree already. Link: https://lore.kernel.org/r/20210817235531.172995-1-nathan@kernel.org Fixes: 2e27f576 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()") Reviewed-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
- 12 Sep, 2021 12 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4 -
git://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION() -
Linus Torvalds authored
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
-
- 11 Sep, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
-
