- 21 Jul, 2020 40 commits
-
-
Lorenzo Bianconi authored
According to the vendor sdk, mt7663 does not need to poll register after firmware own. Since just mt7622 polls status register, set proper timeout value according to the vendor sdk Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Avoid memcpy in Rx hot path to slightly improve performance. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Enable support for HC-M7662BU1 module on mt76x2u driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Fix the following mt7612e hw hangs during suspend/resume reported on Dell Vostro 3360 mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested ------------[ cut here ]----------- CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211] RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100 RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0 R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 wlp1s0: Failed check-sdata-in-driver check, flags: 0x0 CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G W 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211] RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000 R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_do_stop+0x5af/0x8c0 [mac80211] ieee80211_stop+0x16/0x20 [mac80211] __dev_close_many+0xaa/0x120 dev_close_many+0xa1/0x2b0 dev_close+0x6d/0x90 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211] ieee80211_reconfig+0xa2/0x1700 [mac80211] ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 Fixes: 7bc04215 ("mt76: add driver code for MT76x2e") Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Sync from SDK to update HE capabilities. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings, as well as displaying rx statistics. Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
This can be used for calibration in the manufacturing process. It supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings. It also supports receiving packets and showing some statistics, including packet counters and detailed RSSI information. It will only be compiled in if CONFIG_NL80211_TESTMODE is enabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Now that the bus access functions can use mapping for accessing full register addresses, use it for WF_PHY registers to keep them constant. Needed for follow-up work on testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Includes debugfs files for testing it. Will be used for testmode support. Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Makes it possible to read/write them via debugfs, similar to mt7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Unlike on earlier chips, DMA completion on MT7615 does not imply actually having sent out any packets. Since AQL will prevent filling the hardware queues and will only allow more packets to be passed to the driver after tx completion, it makes much more sense to schedule the tx tasklet there. This is also needed for scheduling tx in testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of mt76 code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Overwrite hw queue id for non-bufferable management frames if the hw/fw support always txq (altxq) in order to be in sync with mac txwi code Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
This is easy to add MU EDCA parameters in the future. This patch also fixes a wrong cw_min assignment. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
Enable MU-MIMO DL/UL and add relative counters in debugfs. Currently MU modules read WTBL first to notify BA changes to other cross modules, so adjust mt7915_mcu_sta_ba() accordingly. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
In MT7915, hardware queue map is flexible. However, certain firmware modules like MU and U-APSD presume a fixed queue order to adapt some devices that have DMA scheduler with a strict order, so this patch can help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
For consistency with the rest of the code always rely on defined macros for register access Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Markus Theil authored
kernel test robot <lkp@intel.com> found the following issue and Kalle Valo forwarded it to Linux wireless. drivers/net/wireless/mediatek/mt76/pci.c:8:6: warning: no previous prototype for 'mt76_pci_disable_aspm' Fix this by adding the missing include of mt76.h as Kalle suggested. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Markus Theil authored
While looking at the ETSI regulatory domain definitions and a patch, which allows more channels for ath10k, I also checked the channels allowed for mt76. ETSI regulations would possibly allow to add channels 32, 68, 96, 144, 169 and 173. IEEE 802.11-2016 defines no operating class for channels 32, 68 and 96. This leaves us channels 144, 169 and 173, which are included in this patch. I tested 169 and 173 with a mt76 based USB dongle (AVM AC 860) and they worked fine. If I saw that right, these channels are also covered by register definitions inside the driver. Channel 144 should also work, but gets disabled by the kernel as of now. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Fix up typo in Kconfig with indicating MT7663U is an 802.11ac device Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Sean Wang authored
Introduce ARP filter offload Co-developed-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by: Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Co-developed-by: Soul Huang <Soul.Huang@mediatek.com> Signed-off-by: Soul Huang <Soul.Huang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Rely on mt76_for_each_q_rx whenever possible in order to simply the code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874 ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874 ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
Vladimir Oltean authored
Now that DSA supports MTU configuration, undo the effects of commit 8b1efc0f ("net: remove MTU limits on a few ether_setup callers") and let DSA interfaces use the default min_mtu and max_mtu specified by ether_setup(). This is more important for min_mtu: since DSA is Ethernet, the minimum MTU is the same as of any other Ethernet interface, and definitely not zero. For the max_mtu, we have a callback through which drivers can override that, if they want to. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan McDowell authored
This switch has a single max frame size configuration register, so we track the requested MTU for each port and apply the largest. v2: - Address review feedback from Vladimir Oltean Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Hai authored
Because kfree_skb already checked NULL skb parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function (i.e. 'fealnx_init_one()') and no lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'setup_hw()' (hfcpci.c) GFP_KERNEL can be used because it is called from the probe function and no lock is taken. The call chain is: hfc_probe() --> setup_card() --> setup_hw() When memory is allocated in 'inittiger()' (netjet.c) GFP_ATOMIC must be used because a spin_lock is taken by the caller (i.e. 'nj_init_card()') This is also consistent with the other allocations done in the function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Briana Oursler authored
Add tdc to existing kselftest infrastructure so that it can be run with existing kselftests. TDC now generates objects in objdir/kselftest without cluttering main objdir, leaves source directory clean, and installs correctly in kselftest_install, properly adding itself to run_kselftest.sh script. Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run tdc.py targets with correct arguments. To support single target from selftest/Makefile, combine tc-testing/bpf/Makefile and tc-testing/Makefile. Move action.c up a directory to tc-testing/. Tested with: make O=/tmp/{objdir} TARGETS="tc-testing" kselftest cd /tmp/{objdir} cd kselftest cd tc-testing ./tdc.sh make -C tools/testing/selftests/ TARGETS=tc-testing run_tests make TARGETS="tc-testing" kselftest cd tools/testing/selftests ./kselftest_install.sh /tmp/exampledir My VM doesn't run all the kselftests so I commented out all except my target and net/pmtu.sh then: cd /tmp/exampledir && ./run_kselftest.sh Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Briana Oursler <briana.oursler@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinay Kumar Yadav authored
Enable tcp window scaling option in hw based on sysctl settings and option in connection request. v1->v2: - Set window scale option based on option in connection request. Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mark Starovoytov says: ==================== net: atlantic: various features This patchset adds more features for Atlantic NICs: * media detect; * additional per-queue stats; * PTP stats; * ipv6 support for TCP LSO and UDP GSO; * 64-bit operations; * A0 ntuple filters; * MAC temperature (hwmon). This work is a joint effort of Marvell developers. v3: * reworked patches related to stats: . fixed u64_stats_update_* usage; . use simple assignment in _get_stats / _fill_stats_data; . made _get_sw_stats / _fill_stats_data return count as return value; . split rx and tx per-queue stats; v2: https://patchwork.ozlabs.org/cover/1329652/ * removed media detect feature (will be reworked and submitted later); * removed irq counter from stats; * use u64_stats_update_* to protect 64-bit stats; * use io-64-nonatomic-lo-hi.h for readq/writeq fallbacks; v1: https://patchwork.ozlabs.org/cover/1327894/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bogdanov authored
This patch adds support for ntuple filters on A0. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-