- 07 Mar, 2023 1 commit
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-03-06 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 9 files changed, 64 insertions(+), 18 deletions(-). The main changes are: 1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier, that is, keep resolving such instances instead of bailing out, from Lorenz Bauer. 2) Fix BPF test framework with regards to xdp_frame info misplacement in the "live packet" code, from Alexander Lobakin. 3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX, from Liu Jian. 4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n, from Randy Dunlap. 5) Several BPF doc fixes with either broken links or external instead of internal doc links, from Bagas Sanjaya. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check that modifier resolves after pointer btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES bpf, doc: Link to submitting-patches.rst for general patch submission info bpf, doc: Do not link to docs.kernel.org for kselftest link bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser() riscv, bpf: Fix patch_text implicit declaration bpf, docs: Fix link to BTF doc ==================== Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 06 Mar, 2023 13 commits
-
-
Jakub Kicinski authored
Adrien reports that incorrect data is transmitted when a single page straddles multiple records. We would transmit the same data in all iterations of the loop. Reported-by: Adrien Moulin <amoulin@corp.free.fr> Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr Fixes: c1318b39 ("tls: Add opt-in zerocopy mode of sendfile()") Tested-by: Adrien Moulin <amoulin@corp.free.fr> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Daniel Golle authored
Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c03844 ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Heiner Kallweit authored
Currently link up can't be detected in forced mode if polling isn't used. Only link up interrupt source we have is aneg complete which isn't applicable in forced mode. Therefore we have to use energy-on as link up indicator. Fixes: 73654945 ("net: phy: smsc: skip ENERGYON interrupt if disabled") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Lorenz Bauer says: ==================== See the first patch for a detailed explanation. v2: - Move RESOLVE_TBD assignment out of the loop (Martin) ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-
Lorenz Bauer authored
Add a regression test that ensures that a VAR pointing at a modifier which follows a PTR (or STRUCT or ARRAY) is resolved correctly by the datasec validator. Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-
Lorenz Bauer authored
btf_datasec_resolve contains a bug that causes the following BTF to fail loading: [1] DATASEC a size=2 vlen=2 type_id=4 offset=0 size=1 type_id=7 offset=1 size=1 [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [3] PTR (anon) type_id=2 [4] VAR a type_id=3 linkage=0 [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [6] TYPEDEF td type_id=5 [7] VAR b type_id=6 linkage=0 This error message is printed during btf_check_all_types: [1] DATASEC a size=2 vlen=2 type_id=7 offset=1 size=1 Invalid type By tracing btf_*_resolve we can pinpoint the problem: btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0 btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0 btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22 The last invocation of btf_datasec_resolve should invoke btf_var_resolve by means of env_stack_push, instead it returns EINVAL. The reason is that env_stack_push is never executed for the second VAR. if (!env_type_is_resolve_sink(env, var_type) && !env_type_is_resolved(env, var_type_id)) { env_stack_set_next_member(env, i + 1); return env_stack_push(env, var_type, var_type_id); } env_type_is_resolve_sink() changes its behaviour based on resolve_mode. For RESOLVE_PTR, we can simplify the if condition to the following: (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved() Since we're dealing with a VAR the clause evaluates to false. This is not sufficient to trigger the bug however. The log output and EINVAL are only generated if btf_type_id_size() fails. if (!btf_type_id_size(btf, &type_id, &type_size)) { btf_verifier_log_vsi(env, v->t, vsi, "Invalid type"); return -EINVAL; } Most types are sized, so for example a VAR referring to an INT is not a problem. The bug is only triggered if a VAR points at a modifier. Since we skipped btf_var_resolve that modifier was also never resolved, which means that btf_resolved_type_id returns 0 aka VOID for the modifier. This in turn causes btf_type_id_size to return NULL, triggering EINVAL. To summarise, the following conditions are necessary: - VAR pointing at PTR, STRUCT, UNION or ARRAY - Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or TYPE_TAG The fix is to reset resolve_mode to RESOLVE_TBD before attempting to resolve a VAR from a DATASEC. Fixes: 1dc92851 ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-
Alexander Lobakin authored
&xdp_buff and &xdp_frame are bound in a way that xdp_buff->data_hard_start == xdp_frame It's always the case and e.g. xdp_convert_buff_to_frame() relies on this. IOW, the following: for (u32 i = 0; i < 0xdead; i++) { xdpf = xdp_convert_buff_to_frame(&xdp); xdp_convert_frame_to_buff(xdpf, &xdp); } shouldn't ever modify @xdpf's contents or the pointer itself. However, "live packet" code wrongly treats &xdp_frame as part of its context placed *before* the data_hard_start. With such flow, data_hard_start is sizeof(*xdpf) off to the right and no longer points to the XDP frame. Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several places and praying that there are no more miscalcs left somewhere in the code, unionize ::frm with ::data in a flex array, so that both starts pointing to the actual data_hard_start and the XDP frame actually starts being a part of it, i.e. a part of the headroom, not the context. A nice side effect is that the maximum frame size for this mode gets increased by 40 bytes, as xdp_buff::frame_sz includes everything from data_hard_start (-> includes xdpf already) to the end of XDP/skb shared info. Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it hardcoded for 64 bit && 4k pages, it can be made more flexible later on. Minor: align `&head->data` with how `head->frm` is assigned for consistency. Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for clarity. (was found while testing XDP traffic generator on ice, which calls xdp_convert_frame_to_buff() for each XDP frame) Fixes: b530e9e1 ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230224163607.2994755-1-aleksander.lobakin@intel.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-
Bagas Sanjaya authored
The link for patch submission information in general refers to index page for "Working with the kernel development community" section of kernel docs, whereas the link should have been Documentation/process/submitting-patches.rst instead. Fix it by replacing the index target with the appropriate doc. Fixes: 54222838 ("bpf, doc: convert bpf_devel_QA.rst to use RST formatting") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230228074523.11493-3-bagasdotme@gmail.com
-
Bagas Sanjaya authored
The question on how to run BPF selftests have a reference link to kernel selftest documentation (Documentation/dev-tools/kselftest.rst). However, it uses external link to the documentation at kernel.org/docs (aka docs.kernel.org) instead, which requires Internet access. Fix this and replace the link with internal linking, by using :doc: directive while keeping the anchor text. Fixes: b7a27c3a ("bpf, doc: howto use/run the BPF selftests") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230228074523.11493-2-bagasdotme@gmail.com
-
Selvin Xavier authored
Following warning reported by KASAN during driver unload ================================================================== BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en] Free of addr ffff88814e8dd4c0 by task rmmod/17469 CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019 Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x17b/0x4b3 ? __call_rcu_common.constprop.79+0x27e/0x8c0 ? __pfx_free_object_rcu+0x10/0x10 ? __virt_addr_valid+0xe3/0x160 ? bnxt_remove_one+0x103/0x200 [bnxt_en] kasan_report_invalid_free+0x64/0xd0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kasan_slab_free+0x179/0x1c0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kmem_cache_free+0x194/0x350 bnxt_remove_one+0x103/0x200 [bnxt_en] pci_device_remove+0x62/0x110 device_release_driver_internal+0xf6/0x1c0 driver_detach+0x76/0xe0 bus_remove_driver+0x89/0x160 pci_unregister_driver+0x26/0x110 ? strncpy_from_user+0x188/0x1c0 bnxt_exit+0xc/0x24 [bnxt_en] __x64_sys_delete_module+0x21f/0x390 ? __pfx___x64_sys_delete_module+0x10/0x10 ? __pfx_mem_cgroup_handle_over_high+0x10/0x10 ? _raw_spin_lock+0x87/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __audit_syscall_entry+0x185/0x210 ? ktime_get_coarse_real_ts64+0x51/0x80 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7effcb6fd71b Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffeada270b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005623660e0750 RCX: 00007effcb6fd71b RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005623660e07b8 RBP: 0000000000000000 R08: 00007ffeada26031 R09: 0000000000000000 R10: 00007effcb771280 R11: 0000000000000206 R12: 00007ffeada272e0 R13: 00007ffeada28bc4 R14: 00005623660e02a0 R15: 00005623660e0750 </TASK> Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid calling kfree from bnxt_remove_one. Also, set bp->edev to NULL before freeing the auxilary private structure. Fixes: d80d88b0 ("bnxt_en: Add auxiliary driver support") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations. Fixes: 79632e9b ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
The locking in phy_probe() and phy_remove() does very little to prevent any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA warnings. Remove it. ====================================================== WARNING: possible circular locking dependency detected 6.2.0-dirty #1108 Tainted: G W E ------------------------------------------------------ ip/415 is trying to acquire lock: ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy] but task is already holding lock: ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 rtnl_lock+0x24/0x30 sfp_bus_add_upstream+0x34/0x150 phy_sfp_probe+0x4c/0x94 [libphy] mv3310_probe+0x148/0x184 [marvell10g] phy_probe+0x8c/0x200 [libphy] call_driver_probe+0xbc/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __device_attach_driver+0xc4/0x160 bus_for_each_drv+0x80/0xe0 __device_attach+0xb0/0x1f0 device_initial_probe+0x1c/0x2c bus_probe_device+0xa4/0xb0 device_add+0x360/0x53c phy_device_register+0x60/0xa4 [libphy] fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio] fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio] of_mdiobus_register+0x140/0x340 [of_mdio] orion_mdio_probe+0x298/0x3c0 [mvmdio] platform_probe+0x70/0xe0 call_driver_probe+0x34/0x15c really_probe+0xc0/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0x104/0x210 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x3c bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __platform_driver_register+0x30/0x3c xt_compat_calc_jump+0x28/0xa4 [x_tables] do_one_initcall+0x50/0x1b0 do_init_module+0x50/0x1fc load_module+0x684/0x744 __do_sys_finit_module+0xc4/0x140 __arm64_sys_finit_module+0x28/0x34 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 -> #0 (&dev->lock){+.+.}-{3:3}: check_prev_add+0xb4/0xc80 validate_chain+0x414/0x47c __lock_acquire+0x35c/0x6c0 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x84 __mutex_lock+0x8c/0x414 mutex_lock_nested+0x34/0x40 phy_attach_direct+0x17c/0x3a0 [libphy] phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink] phylink_fwnode_phy_connect+0x48/0x60 [phylink] mvpp2_open+0xec/0x2e0 [mvpp2] __dev_open+0x104/0x214 __dev_change_flags+0x1d4/0x254 dev_change_flags+0x2c/0x7c do_setlink+0x254/0xa50 __rtnl_newlink+0x430/0x514 rtnl_newlink+0x58/0x8c rtnetlink_rcv_msg+0x17c/0x560 netlink_rcv_skb+0x64/0x150 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x1d4/0x2b4 netlink_sendmsg+0x1a4/0x400 ____sys_sendmsg+0x228/0x290 ___sys_sendmsg+0x88/0xec __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x6c/0x1b0 do_el0_svc+0x34/0x44 el0_svc+0x48/0xf0 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a0/0x1a4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&dev->lock); lock(rtnl_mutex); lock(&dev->lock); *** DEADLOCK *** Fixes: 298e54fa ("net: phy: add core phylib sfp support") Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rongguang Wei authored
When MAC is not support PMT, driver will check PHY's WoL capability and set device wakeup capability in stmmac_init_phy(). We can enable the WoL through ethtool, the driver would enable the device wake up flag. Now the device_may_wakeup() return true. But if there is a way which enable the PHY's WoL capability derectly, like in BIOS. The driver would not know the enable thing and would not set the device wake up flag. The phy_suspend may failed like this: [ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16 [ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16 [ 32.409067] PM: Some devices failed to suspend, or early wake event detected Add to set the device wakeup enable flag according to the get_wol function result in PHY can fix the error in this scene. v2: add a Fixes tag. Fixes: 1d8e5b0f ("net: stmmac: Support WOL with phy") Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Mar, 2023 13 commits
-
-
Liu Jian authored
When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b3 ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d866 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177a ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230303080946.1146638-1-liujian56@huawei.com
-
David S. Miller authored
Simon Horman says: ==================== nfp: fix incorrect IPsec checksum handling this short series resolves two problems with IPsec checksum handling in the nfp driver. * PATCH 1/3, 2/3: Correct setting of checksum flags. One patch for each of the nfd3 and nfdk datapaths. * Patch 3/3: Correct configuration of NETIF_F_CSUM_MASK so that the stack does not unecessarily calculate csums for IPsec offload packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huanhuan Wang authored
When esp-tx-csum-offload is set to on, the protocol stack shouldn't calculate the IPsec offload packet's csum, but it does. Because the callback `.ndo_features_check` incorrectly masked NETIF_F_CSUM_MASK bit. Fixes: 57f273ad ("nfp: add framework to support ipsec offloading") Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huanhuan Wang authored
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. Fixes: 436396f2 ("nfp: support IPsec offloading for NFP3800") Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huanhuan Wang authored
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't set the udp and tcp csum flag at the same time for one packet, should set l4-csum flag according to the transport layer is tcp or udp. Fixes: 57f273ad ("nfp: add framework to support ipsec offloading") Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Oros authored
ice_get_module_eeprom() is broken since commit e9c9692c ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c ("ice: Reimplement module reads used by ethtool") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== tools: ynl: fix subset use and change default value for attrs/ops Fix a problem in subsetting, which will become apparent when the devlink family comes after the merge window. Even tho none of the existing families need this, we don't want someone to get "inspired" by the current, incorrect code when using specs in other languages. Change the default value for the first attr/op. This is a slight behavior change so needs to go in now. The diffstat of the last patch should serve as the clearest justification there.. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Now that the codegen rules had been changed we can update the specs to reflect the new default. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Pretty much all families use value: 1 or reserve as unspec the first entry in attribute set and the first operation. Make this the default. Update documentation (the doc for values of operations just refers back to doc for attrs so updating only attrs). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
To avoid having to repeat the entire definition of an attribute (including the value) use the Attr object from the original set. In fact this is already the documented expectation. Fixes: be5bea1c ("net: add basic C code generators for Netlink") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-02 Two small fixes this time. Alexander Aring fixed a potential negative array access in the ca8210 driver. Miquel Raynal fixed a crash that could have been triggered through the extended netlink API for 802154. This only came in this merge window. Found by syzkaller. * tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: ieee802154: Prevent user from crashing the host ca8210: fix mac_len negative array access ==================== Link: https://lore.kernel.org/r/20230302153032.1312755-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Shigeru Yoshida authored
syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below: BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214 CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10227 [inline] netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list. Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification. When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module. This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification. Fixes: 7ad65bf6 ("caif: Add support for CAIF over CDC NCM USB interface") CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com> Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f [1] Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yuiko Oshino authored
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3f ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Mar, 2023 6 commits
-
-
Miquel Raynal authored
Avoid crashing the machine by checking info->attrs[NL802154_ATTR_SCAN_TYPE] presence before de-referencing it, which was the primary intend of the blamed patch. Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: a0b61066 ("ieee802154: Convert scan error messages to extack") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230301154450.547716-1-miquel.raynal@bootlin.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
-
Alexander Aring authored
This patch fixes a buffer overflow access of skb->data if ieee802154_hdr_peek_addrs() fails. Reported-by: lianhui tang <bluetlh@gmail.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
-
Brian Vazquez authored
Florian reported a regression and sent a patch with the following changelog: <quote> There is a noticeable tcp performance regression (loopback or cross-netns), seen with iperf3 -Z (sendfile mode) when generic retpolines are needed. With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave memory pressure happen much more often. For TCP indirect calls are used. We can't remove the if-set-return short-circuit check in tcp_enter_memory_pressure because there are callers other than sk_enter_memory_pressure. Doing a check in the sk wrapper too reduces the indirect calls enough to recover some performance. Before, 0.00-60.00 sec 322 GBytes 46.1 Gbits/sec receiver After: 0.00-60.04 sec 359 GBytes 51.4 Gbits/sec receiver "iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns. </quote> It seems we forgot to upstream this indirect call mitigation we had for years, lets do this instead. [edumazet] - It seems we forgot to upstream this indirect call mitigation we had for years, let's do this instead. - Changed to INDIRECT_CALL_INET_1() to avoid bots reports. Fixes: 4890b686 ("net: keep sk->sk_forward_alloc as small as possible") Reported-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix bogus error report in selftests/netfilter/nft_nat.sh, from Hangbin Liu. 2) Initialize last and quota expressions from template when expr_ops::clone is called, otherwise, states are not restored accordingly when loading a dynamic set with elements using these two expressions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_quota: copy content when cloning expression netfilter: nft_last: copy content when cloning expression selftests: nft_nat: ensuring the listening side is up before starting the client ==================== Link: https://lore.kernel.org/r/20230301222021.154670-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
syzbot sent a hung task report and Eric explains that adversarial receiver may keep RWIN at 0 for a long time, so we are not guaranteed to make forward progress. Thread which took tx_lock and went to sleep may not release tx_lock for hours. Use interruptible sleep where possible and reschedule the work if it can't take the lock. Testing: existing selftest passes Reported-by: syzbot+9c0268252b8ef967c62e@syzkaller.appspotmail.com Fixes: 79ffe608 ("net/tls: add a TX lock") Link: https://lore.kernel.org/all/000000000000e412e905f5b46201@google.com/ Cc: stable@vger.kernel.org # wait 4 weeks Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230301002857.2101894-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hangyu Hua authored
ctx->crypto_send.info is not protected by lock_sock in do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf() and error paths of do_tls_setsockopt_conf() may lead to a use-after-free or null-deref. More discussion: https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/ Fixes: 3c4d7559 ("tls: kernel TLS support") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 01 Mar, 2023 7 commits
-
-
Pablo Neira Ayuso authored
If the ruleset contains consumed quota, restore them accordingly. Otherwise, listing after restoration shows never used items. Restore the user-defined quota and flags too. Fixes: ed0a0c60 ("netfilter: nft_quota: move stateful fields out of expression data") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
If the ruleset contains last timestamps, restore them accordingly. Otherwise, listing after restoration shows never used items. Fixes: 33a24de3 ("netfilter: nft_last: move stateful fields out of expression data") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Hangbin Liu authored
The test_local_dnat_portonly() function initiates the client-side as soon as it sets the listening side to the background. This could lead to a race condition where the server may not be ready to listen. To ensure that the server-side is up and running before initiating the client-side, a delay is introduced to the test_local_dnat_portonly() function. Before the fix: # ./nft_nat.sh PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU 2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused ERROR: inet port rewrite After the fix: # ./nft_nat.sh PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ PASS: inet port rewrite without l3 address Fixes: 282e5f8f ("netfilter: nat: really support inet nat without l3 address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Horatiu Vultur authored
When the police was removed from the port, then it was trying to remove the police from the police id and not from the actual police index. The police id represents the id of the police and police index represents the position in HW where the police is situated. The port police id can be any number while the port police index is a number based on the port chip port. Fix this by deleting the police from HW that is situated at the police index and not police id. Fixes: 5390334b ("net: lan966x: Add port police support using tc-matchall") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
The two "goto errout;" paths in fl_change() became wrong after cited commit. Indeed we only must not call __fl_put() until the net pointer has been set in tcf_exts_init_ex() This is a minimal fix. We might in the future validate TCA_FLOWER_FLAGS before we allocate @fnew. BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:72 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] BUG: KASAN: null-ptr-deref in refcount_read include/linux/refcount.h:147 [inline] BUG: KASAN: null-ptr-deref in __refcount_add_not_zero include/linux/refcount.h:152 [inline] BUG: KASAN: null-ptr-deref in __refcount_inc_not_zero include/linux/refcount.h:227 [inline] BUG: KASAN: null-ptr-deref in refcount_inc_not_zero include/linux/refcount.h:245 [inline] BUG: KASAN: null-ptr-deref in maybe_get_net include/net/net_namespace.h:269 [inline] BUG: KASAN: null-ptr-deref in tcf_exts_get_net include/net/pkt_cls.h:260 [inline] BUG: KASAN: null-ptr-deref in __fl_put net/sched/cls_flower.c:513 [inline] BUG: KASAN: null-ptr-deref in __fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508 Read of size 4 at addr 000000000000014c by task syz-executor548/5082 CPU: 0 PID: 5082 Comm: syz-executor548 Not tainted 6.2.0-syzkaller-05251-g5b7c4cab #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_report mm/kasan/report.c:420 [inline] kasan_report+0xec/0x130 mm/kasan/report.c:517 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x141/0x190 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:72 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] __refcount_add_not_zero include/linux/refcount.h:152 [inline] __refcount_inc_not_zero include/linux/refcount.h:227 [inline] refcount_inc_not_zero include/linux/refcount.h:245 [inline] maybe_get_net include/net/net_namespace.h:269 [inline] tcf_exts_get_net include/net/pkt_cls.h:260 [inline] __fl_put net/sched/cls_flower.c:513 [inline] __fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508 fl_change+0x101b/0x4ab0 net/sched/cls_flower.c:2341 tc_new_tfilter+0x97c/0x2290 net/sched/cls_api.c:2310 rtnetlink_rcv_msg+0x996/0xd50 net/core/rtnetlink.c:6165 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 ____sys_sendmsg+0x334/0x900 net/socket.c:2504 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2558 __sys_sendmmsg+0x18f/0x460 net/socket.c:2644 __do_sys_sendmmsg net/socket.c:2673 [inline] __se_sys_sendmmsg net/socket.c:2670 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2670 Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Reported-by: syzbot+baabf3efa7c1e57d28b2@syzkaller.appspotmail.com Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
ila_xlat_nl_cmd_get_mapping() generates an empty skb, triggerring a recent sanity check [1]. Instead, return an error code, so that user space can get it. [1] skb_assert_len WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline] WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 Modules linked in: CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_assert_len include/linux/skbuff.h:2527 [inline] pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 lr : skb_assert_len include/linux/skbuff.h:2527 [inline] lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 sp : ffff80001e0d6c40 x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0 x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00 x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10 x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0 x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600 x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e Call trace: skb_assert_len include/linux/skbuff.h:2527 [inline] __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156 dev_queue_xmit include/linux/netdevice.h:3033 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline] __netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325 netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1283 [inline] netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292 netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380 nlmsg_unicast include/net/netlink.h:1099 [inline] genlmsg_unicast include/net/genetlink.h:433 [inline] genlmsg_reply include/net/genetlink.h:443 [inline] ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x558/0x844 net/socket.c:2479 ___sys_sendmsg net/socket.c:2533 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2562 __do_sys_sendmsg net/socket.c:2571 [inline] __se_sys_sendmsg net/socket.c:2569 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 irq event stamp: 136484 hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345 hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405 softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline] softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600 softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 ---[ end trace 0000000000000000 ]--- skb len=0 headroom=0 headlen=0 tailroom=192 mac=(0,0) net=(0,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0 dev name=nlmon0 feat=0x0000000000005861 Fixes: 7f00feaf ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
Smatch reports that 'ci' can be used uninitialized. The current code ignores errno coming from tcf_idr_check_alloc, which will lead to the incorrect usage of 'ci'. Handle the errno as it should. Fixes: 288864ef ("net/sched: act_connmark: transition to percpu stats and rcu") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-