- 03 Dec, 2021 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Fix potential overlap of pseudo-MMIO addresses with MIO addresses - Fix stack unwinder test case inline assembly compile error that happens with LLVM's integrated assembler - Update defconfigs * tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390/pci: move pseudo-MMIO to prevent MIO overlap s390/test_unwind: use raw opcode instead of invalid instruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc4. One of them is just a trivial documentation fix, whereas the other two address a warning in the kexec code and a crash in ftrace on systems implementing BTI. The latter patch has a couple of ugly ifdefs which Mark plans to clean up separately, but as-is the patch is straightforward for backporting to stable kernels. Summary: - Add missing BTI landing instructions to the ftrace*_caller trampolines - Fix kexec() WARN when DEBUG_VIRTUAL is enabled - Fix PAC documentation by removing stale references to compiler flags" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ftrace: add missing BTIs arm64: kexec: use __pa_symbol(empty_zero_page) arm64: update PAC description for kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has another set of driver bugfixes, mostly for the stm32f7 driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Handle a spurious start completion interrupt flag i2c: stm32f7: use proper DMAENGINE API for termination i2c: stm32f7: stop dma transfer in case of NACK i2c: stm32f7: recover the bus on access timeout i2c: stm32f7: flush TX FIFO upon transfer errors i2c: cbus-gpio: set atomic transfer callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull libata fixes from Damien Le Moal: "Two sparse warning fixes and a couple of patches to fix an issue with sata_fsl driver module removal: - A couple of patches to avoid sparse warnings in libata-sata and in the pata_falcon driver (from Yang and Finn). - A couple of sata_fsl driver patches fixing IRQ free and proc unregister on module removal (from Baokun)" * tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: replace snprintf in show functions with sysfs_emit sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl pata_falcon: Avoid type warnings from sparse
-
Linus Torvalds authored
Jann Horn points out that there is another possible race wrt Unix domain socket garbage collection, somewhat reminiscent of the one fixed in commit cbcf0112 ("af_unix: fix garbage collect vs MSG_PEEK"). See the extended comment about the garbage collection requirements added to unix_peek_fds() by that commit for details. The race comes from how we can locklessly look up a file descriptor just as it is in the process of being closed, and with the right artificial timing (Jann added a few strategic 'mdelay(500)' calls to do that), the Unix domain socket garbage collector could see the reference count decrement of the close() happen before fget() took its reference to the file and the file was attached onto a new file descriptor. This is all (intentionally) correct on the 'struct file *' side, with RCU lookups and lockless reference counting very much part of the design. Getting that reference count out of order isn't a problem per se. But the garbage collector can get confused by seeing this situation of having seen a file not having any remaining external references and then seeing it being attached to an fd. In commit cbcf0112 ("af_unix: fix garbage collect vs MSG_PEEK") the fix was to serialize the file descriptor install with the garbage collector by taking and releasing the unix_gc_lock. That's not really an option here, but since this all happens when we are in the process of looking up a file descriptor, we can instead simply just re-check that the file hasn't been closed in the meantime, and just re-do the lookup if we raced with a concurrent close() of the same file descriptor. Reported-and-tested-by: Jann Horn <jannh@google.com> Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Dec, 2021 35 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit of an uptick in patch count this week, though it's all relatively small overall. I suspect msm has been queuing up a few fixes to skew it here. Otherwise amdgpu has a scattered bunch of small fixes, and then some vc4, i915. virtio-gpu changes an rc1 introduced uAPI mistake, and makes it operate more like other drivers. This should be fine as no userspace relies on the behaviour yet. Summary: dma-buf: - memory leak fix msm: - kasan found memory overwrite - mmap flags - fencing error bug - ioctl NULL ptr - uninit var - devfreqless devices fix - dsi lanes fix - dp: avoid unpowered aux xfers amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free i915: - backlight regression - Intel HDR backlight detection fix - revert TGL workaround that caused hangs virtio-gpu: - switch back to drm_poll vc4: - memory leak - error check fix - HVS modesetting fixes" * tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits) Revert "drm/i915: Implement Wa_1508744258" drm/amdkfd: process_info lock not needed for svm drm/amdgpu: adjust the kfd reset sequence in reset sriov function drm/amd/display: add connector type check for CRC source set drm/amdkfd: fix double free mem structure drm/amdkfd: set "r = 0" explicitly before goto drm/amd/display: Add work around for tunneled MST. drm/amd/display: Fix for the no Audio bug with Tiled Displays drm/amd/display: Clear DPCD lane settings after repeater training drm/amd/display: Allow DSC on supported MST branch devices drm/amdgpu: Don't halt RLC on GFX suspend drm/amdgpu: fix the missed handling for SDMA2 and SDMA3 drm/amdgpu: check atomic flag to differeniate with legacy path drm/amdgpu: cancel the correct hrtimer on exit drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID drm/i915/dp: Perform 30ms delay after source OUI write dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow drm/i915: Add support for panels with VESA backlights with PWM enable/disable drm/vc4: kms: Fix previous HVS commit wait drm/vc4: kms: Don't duplicate pending commit ...
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixing a regression where the backlight brightness control stopped working. - Fix the Intel HDR backlight support detection. - Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also for a hang, but in a much rarer scenario. The proper solution need to be done with help from user space and it will be addressed later. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yakf9hdnR5or+zNP@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Switch back to drm_poll for virtio, multiple fixes (memory leak, improper error check, some functional fixes too) for vc4, memory leak fix in dma-buf, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Three tracing fixes: - Allow compares of strings when using signed and unsigned characters - Fix kmemleak false positive for histogram entries - Handle negative numbers for user defined kretprobe data sizes" * tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kprobes: Limit max data_size of the kretprobe instances tracing: Fix a kmemleak false positive in tracing_map tracing/histograms: String compares should not care about signed values
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI fixes from Corey Minyard: "Some changes that went in 5.16 had issues. When working on the design a piece was redesigned and things got missed. And the message type was not being initialized when it was allocated, resulting in crashes. In addition, the IPMI driver has had a shutdown issue where it could still have an item in a system workqueue after it had been shutdown. Move to a private workqueue to avoid that problem" * tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi: ipmi:ipmb: Fix unknown command response ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking ipmi: fix oob access due to uninit smi_msg type ipmi: msghandler: Make symbol 'remove_work_wq' static ipmi: Move remove_work to dedicated workqueue
-
Heiko Carstens authored
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
José Roberto de Souza authored
This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 28ec02c9 ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com (cherry picked from commit f3799ff1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Florian Fainelli authored
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
Eliminate the follow smatch warning: net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test would not be run by default due to the wrong case names Fixes: 34d0302a ("selftests: Add ipv6 address bind tests to fcnal-test") Fixes: 75b2b2b3 ("selftests: Add ipv4 address bind tests to fcnal-test") Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Kucharski authored
Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched. Fixes: c6a58ffe ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matt Johnston authored
We need to test against the existing route type, not the rtm_type in the netlink request. Fixes: 83f0a0b7 ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tony Lu authored
When smc_close_final() returns error, the return code overwrites by kernel_sock_shutdown() in smc_close_active(). The return code of smc_close_final() is more important than kernel_sock_shutdown(), and it will pass to userspace directly. Fix it by keeping both return codes, if smc_close_final() raises an error, return it or kernel_sock_shutdown()'s. Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9 ("net/smc: Ensure the active closing peer first closes clcsock") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sukadev Bhattiprolu authored
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: bbd80930 ("ibmvnic: Reuse tx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sukadev Bhattiprolu authored
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: 489de956 ("ibmvnic: Reuse rx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dust Li authored
smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ 231.278222] ------------[ cut here ]------------ [ 231.278726] kernel BUG at lib/list_debug.c:53! [ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ 231.281248] Workqueue: events smc_link_down_work [ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ 231.288337] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 231.291940] Call Trace: [ 231.292211] smc_lgr_terminate_sched+0x53/0xa0 [ 231.292677] smc_switch_conns+0x75/0x6b0 [ 231.293085] ? update_load_avg+0x1a6/0x590 [ 231.293517] ? ttwu_do_wakeup+0x17/0x150 [ 231.293907] ? update_load_avg+0x1a6/0x590 [ 231.294317] ? newidle_balance+0xca/0x3d0 [ 231.294716] smcr_link_down+0x50/0x1a0 [ 231.295090] ? __wake_up_common_lock+0x77/0x90 [ 231.295534] smc_link_down_work+0x46/0x60 [ 231.295933] process_one_work+0x18b/0x350 Fixes: a0a62ee1 ("net/smc: separate locks for SMCD and SMCR link group lists") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiayu Zhang authored
The description of ETH_P_802_3_MIN is misleading. The value of EthernetType in Ethernet II frame is more than 0x0600, the value of Length in 802.3 frame is less than 0x0600. Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tianhao Chai authored
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by: Tianhao Chai <cth451@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Before commit faa041a4 ("ipv4: Create cleanup helper for fib_nh") changes to net->ipv4.fib_num_tclassid_users were protected by RTNL. After the change, this is no longer the case, as free_fib_info_rcu() runs after rcu grace period, without rtnl being held. Fixes: faa041a4 ("ipv4: Create cleanup helper for fib_nh") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Rutland authored
When branch target identifiers are in use, code reachable via an indirect branch requires a BTI landing pad at the branch target site. When building FTRACE_WITH_REGS atop patchable-function-entry, we miss BTIs at the start start of the `ftrace_caller` and `ftrace_regs_caller` trampolines, and when these are called from a module via a PLT (which will use a `BR X16`), we will encounter a BTI failure, e.g. | # insmod lkdtm.ko | lkdtm: No crash points registered, enable through debugfs | # echo function_graph > /sys/kernel/debug/tracing/current_tracer | # cat /sys/kernel/debug/provoke-crash/DIRECT | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x34000001 -- BTI | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | pstate: 60400405 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=jc) | pc : ftrace_caller+0x0/0x3c | lr : lkdtm_debugfs_open+0xc/0x20 [lkdtm] | sp : ffff800012e43b00 | x29: ffff800012e43b00 x28: 0000000000000000 x27: ffff800012e43c88 | x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000c171f200 | x23: ffff0000c27b1e00 x22: ffff0000c2265240 x21: ffff0000c23c8c30 | x20: ffff8000090ba380 x19: 0000000000000000 x18: 0000000000000000 | x17: 0000000000000000 x16: ffff80001002bb4c x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000900ff0 | x11: ffff0000c4166310 x10: ffff800012e43b00 x9 : ffff8000104f2384 | x8 : 0000000000000001 x7 : 0000000000000000 x6 : 000000000000003f | x5 : 0000000000000040 x4 : ffff800012e43af0 x3 : 0000000000000001 | x2 : ffff8000090b0000 x1 : ffff0000c171f200 x0 : ffff0000c23c8c30 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x1a4 | show_stack+0x24/0x30 | dump_stack_lvl+0x68/0x84 | dump_stack+0x1c/0x38 | panic+0x168/0x360 | arm64_exit_nmi.isra.0+0x0/0x80 | el1h_64_sync_handler+0x68/0xd4 | el1h_64_sync+0x78/0x7c | ftrace_caller+0x0/0x3c | do_dentry_open+0x134/0x3b0 | vfs_open+0x38/0x44 | path_openat+0x89c/0xe40 | do_filp_open+0x8c/0x13c | do_sys_openat2+0xbc/0x174 | __arm64_sys_openat+0x6c/0xbc | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x84/0xa0 | el0_svc+0x28/0x80 | el0t_64_sync_handler+0xa8/0x130 | el0t_64_sync+0x1a0/0x1a4 | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x0,00000f42,da660c5f | Memory Limit: none | ---[ end Kernel panic - not syncing: Unhandled exception ]--- Fix this by adding the required `BTI C`, as we only require these to be reachable via BL for direct calls or BR X16/X17 for PLTs. For now, these are open-coded in the function prologue, matching the style of the `__hwasan_tag_mismatch` trampoline. In future we may wish to consider adding a new SYM_CODE_START_*() variant which has an implicit BTI. When ftrace is built atop mcount, the trampolines are marked with SYM_FUNC_START(), and so get an implicit BTI. We may need to change these over to SYM_CODE_START() in future for RELIABLE_STACKTRACE, in case we need to apply special care aroud the return address being rewritten. Fixes: 97fed779 ("arm64: bti: Provide Kconfig for kernel mode BTI") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211129135709.2274019-1-mark.rutland@arm.comSigned-off-by: Will Deacon <will@kernel.org>
-
Mark Rutland authored
In machine_kexec_post_load() we use __pa() on `empty_zero_page`, so that we can use the physical address during arm64_relocate_new_kernel() to switch TTBR1 to a new set of tables. While `empty_zero_page` is part of the old kernel, we won't clobber it until after this switch, so using it is benign. However, `empty_zero_page` is part of the kernel image rather than a linear map address, so it is not correct to use __pa(x), and we should instead use __pa_symbol(x) or __pa(lm_alias(x)). Otherwise, when the kernel is built with DEBUG_VIRTUAL, we'll encounter splats as below, as I've seen when fuzzing v5.16-rc3 with Syzkaller: | ------------[ cut here ]------------ | virt_to_phys used for non-linear address: 000000008492561a (empty_zero_page+0x0/0x1000) | WARNING: CPU: 3 PID: 11492 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | CPU: 3 PID: 11492 Comm: syz-executor.0 Not tainted 5.16.0-rc3-00001-g48bd452a045c #1 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | lr : __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | sp : ffff80001af17bb0 | x29: ffff80001af17bb0 x28: ffff1cc65207b400 x27: ffffb7828730b120 | x26: 0000000000000e11 x25: 0000000000000000 x24: 0000000000000001 | x23: ffffb7828963e000 x22: ffffb78289644000 x21: 0000600000000000 | x20: 000000000000002d x19: 0000b78289644000 x18: 0000000000000000 | x17: 74706d6528206131 x16: 3635323934383030 x15: 303030303030203a | x14: 1ffff000035e2eb8 x13: ffff6398d53f4f0f x12: 1fffe398d53f4f0e | x11: 1fffe398d53f4f0e x10: ffff6398d53f4f0e x9 : ffffb7827c6f76dc | x8 : ffff1cc6a9fa7877 x7 : 0000000000000001 x6 : ffff6398d53f4f0f | x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff1cc66f2a99c0 | x2 : 0000000000040000 x1 : d7ce7775b09b5d00 x0 : 0000000000000000 | Call trace: | __virt_to_phys+0x120/0x1c0 arch/arm64/mm/physaddr.c:12 | machine_kexec_post_load+0x284/0x670 arch/arm64/kernel/machine_kexec.c:150 | do_kexec_load+0x570/0x670 kernel/kexec.c:155 | __do_sys_kexec_load kernel/kexec.c:250 [inline] | __se_sys_kexec_load kernel/kexec.c:231 [inline] | __arm64_sys_kexec_load+0x1d8/0x268 kernel/kexec.c:231 | __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] | invoke_syscall+0x90/0x2e0 arch/arm64/kernel/syscall.c:52 | el0_svc_common.constprop.2+0x1e4/0x2f8 arch/arm64/kernel/syscall.c:142 | do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:181 | el0_svc+0x60/0x248 arch/arm64/kernel/entry-common.c:603 | el0t_64_sync_handler+0x90/0xb8 arch/arm64/kernel/entry-common.c:621 | el0t_64_sync+0x180/0x184 arch/arm64/kernel/entry.S:572 | irq event stamp: 2428 | hardirqs last enabled at (2427): [<ffffb7827c6f2308>] __up_console_sem+0xf0/0x118 kernel/printk/printk.c:255 | hardirqs last disabled at (2428): [<ffffb7828223df98>] el1_dbg+0x28/0x80 arch/arm64/kernel/entry-common.c:375 | softirqs last enabled at (2424): [<ffffb7827c411c00>] softirq_handle_end kernel/softirq.c:401 [inline] | softirqs last enabled at (2424): [<ffffb7827c411c00>] __do_softirq+0xa28/0x11e4 kernel/softirq.c:587 | softirqs last disabled at (2417): [<ffffb7827c59015c>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] invoke_softirq kernel/softirq.c:439 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] __irq_exit_rcu kernel/softirq.c:636 [inline] | softirqs last disabled at (2417): [<ffffb7827c59015c>] irq_exit_rcu+0x53c/0x688 kernel/softirq.c:648 | ---[ end trace 0ca578534e7ca938 ]--- With or without DEBUG_VIRTUAL __pa() will fall back to __kimg_to_phys() for non-linear addresses, and will happen to do the right thing in this case, even with the warning. But we should not depend upon this, and to keep the warning useful we should fix this case. Fix this issue by using __pa_symbol(), which handles kernel image addresses (and checks its input is a kernel image address). This matches what we do elsewhere, e.g. in arch/arm64/include/asm/pgtable.h: | #define ZERO_PAGE(vaddr) phys_to_page(__pa_symbol(empty_zero_page)) Fixes: 3744b528 ("arm64: kexec: install a copy of the linear-map") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/r/20211130121849.3319010-1-mark.rutland@arm.comSigned-off-by: Will Deacon <will@kernel.org>
-
Kuan-Ying Lee authored
Remove the paragraph which has nothing to do with the kernel and add PAC description related to kernel. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Link: https://lore.kernel.org/r/20211201034014.20048-1-Kuan-Ying.Lee@mediatek.comSigned-off-by: Will Deacon <will@kernel.org>
-
Yang Guang authored
coccinelle report: ./drivers/ata/libata-sata.c:830:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-
Eric Dumazet authored
A recent change triggers a KMSAN warning, because request sockets do not initialize @sk_rx_queue_mapping field. Add sk_rx_queue_update() helper to make our intent clear. BUG: KMSAN: uninit-value in sk_rx_queue_set include/net/sock.h:1922 [inline] BUG: KMSAN: uninit-value in tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 sk_rx_queue_set include/net/sock.h:1922 [inline] tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 invoke_softirq+0xa4/0x130 kernel/softirq.c:432 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x76/0x130 kernel/softirq.c:648 common_interrupt+0xb6/0xd0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 smap_restore arch/x86/include/asm/smap.h:67 [inline] get_shadow_origin_ptr mm/kmsan/instrumentation.c:31 [inline] __msan_metadata_ptr_for_load_1+0x28/0x30 mm/kmsan/instrumentation.c:63 tomoyo_check_acl+0x1b0/0x630 security/tomoyo/domain.c:173 tomoyo_path_permission security/tomoyo/file.c:586 [inline] tomoyo_check_open_permission+0x61f/0xe10 security/tomoyo/file.c:777 tomoyo_file_open+0x24f/0x2d0 security/tomoyo/tomoyo.c:311 security_file_open+0xb1/0x1f0 security/security.c:1635 do_dentry_open+0x4e4/0x1bf0 fs/open.c:809 vfs_open+0xaf/0xe0 fs/open.c:957 do_open fs/namei.c:3426 [inline] path_openat+0x52f1/0x5dd0 fs/namei.c:3559 do_filp_open+0x306/0x760 fs/namei.c:3586 do_sys_openat2+0x263/0x8f0 fs/open.c:1212 do_sys_open fs/open.c:1228 [inline] __do_sys_open fs/open.c:1236 [inline] __se_sys_open fs/open.c:1232 [inline] __x64_sys_open+0x314/0x380 fs/open.c:1232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409 alloc_pages+0x8a5/0xb80 alloc_slab_page mm/slub.c:1810 [inline] allocate_slab+0x287/0x1c20 mm/slub.c:1947 new_slab mm/slub.c:2010 [inline] ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039 __slab_alloc mm/slub.c:3126 [inline] slab_alloc_node mm/slub.c:3217 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264 reqsk_alloc include/net/request_sock.h:91 [inline] inet_reqsk_alloc+0xaf/0x8b0 net/ipv4/tcp_input.c:6712 tcp_conn_request+0x910/0x4dc0 net/ipv4/tcp_input.c:6852 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 Fixes: 342159ee ("net: avoid dirtying sk->sk_rx_queue_mapping") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130182939.2584764-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhou Qingyang authored
In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c56111 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhou Qingyang authored
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04 ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Stephen Suryaputra authored
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125db ("net: Introduce VRF device driver") Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhou Qingyang authored
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f966452 ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Masami Hiramatsu authored
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if user sets it enough big number (e.g. (size_t)-8), the result of 'data_size + sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct kretprobe_instance) or zero. In result, the kretprobe_instance are allocated without enough memory, and kretprobe accesses outside of allocated memory. To avoid this issue, introduce a max limitation of the kretprobe::data_size. 4KB per instance should be OK. Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: f47cd9b5 ("kprobes: kretprobe user entry-handler") Reported-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Chen Jun authored
Doing the command: echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger Triggers many kmemleak reports: unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 The reason is elts->pages[i] is alloced by get_zeroed_page. and kmemleak will not scan the area alloced by get_zeroed_page. The address stored in elts->pages will be regarded as leaked. That is, the elts->pages[i] will have pointers loaded onto it as well, and without telling kmemleak about it, those pointers will look like memory without a reference. To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i] Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.comSigned-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
When comparing two strings for the "onmatch" histogram trigger, fields that are strings use string comparisons, which do not care about being signed or not. Do not fail to match two string fields if one is unsigned char array and the other is a signed char array. Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/ Cc: stable@vgerk.kernel.org Cc: Tom Zanussi <zanussi@kernel.org> Cc: Yafang Shao <laoar.shao@gmail.com> Fixes: b05e89ae ("tracing: Accept different type for synthetic event fields") Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org> Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.16-2021-12-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-12-01: amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211201232802.5801-1-alexander.deucher@amd.com
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
msm misc fixes, build, display Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com
-