- 16 Dec, 2018 19 commits
-
-
Nir Dotan authored
Spectrum-2 HW uses Bloom filter in order to skip lookups on specific eRPs. It uses crc-16-Msbit-first calculation over a specific layout of a rule's key fields combined with eRP ID as well as region ID. Per potential lookup, iff the Bloom filter entry of the calculated index is empty, then the lookup can be skipped. Hence, the mlxsw driver should update the Bloom filter entry per each rule insertion or deletion when rules are part of an eRP. Add functions for adding and deleting entries in the Bloom filter. In order to do so also add crc-16 computation based on the specific Spectrum-2 polynomial and a function for encoding the crc-16 input in the manner dictated by HW implementation. Signed-off-by:
Nir Dotan <nird@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
Lay the foundations for Bloom filter handling. Introduce a new file for Bloom filter actions. Add struct mlxsw_sp_acl_bf to struct mlxsw_sp_acl_erp_core and initialize the Bloom filter data structure. Also take care of proper destruction when terminating. Signed-off-by:
-
Nir Dotan authored
Add the maximum Bloom filter logarithmic size per eRP table bank. Signed-off-by:
-
Nir Dotan authored
Bloom filter is a bit vector which allows the HW a fast lookup on a small size bit vector, that may reduce the number of lookups on the A-TCAM memory. PEABFE register allows setting values to the bits of the bit vector mentioned above. Add the register to be later used in A-TCAM optimizations. Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== rtnl fdb get This series adds support for rtnl fdb get similar to route get. v2: add nda_policy, fixes to exact msgs, strict nlmsg parsing v3: remove unnecessary attribute length checks + simplify code as pointed out by david ==================== Signed-off-by: -
Roopa Prabhu authored
tests the below three cases of bridge fdb get: [bridge, mac, vlan] [bridge_port, mac, vlan, flags=[NTF_MASTER]] [vxlandev, mac, flags=NTF_SELF] depends on iproute2 support for bridge fdb get. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch implements ndo_fdb_get for a vxlan device. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch implements ndo_fdb_get for the bridge fdb. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by:
-
Roopa Prabhu authored
This patch adds support for fdb get similar to route get. arguments can be any of the following (similar to fdb add/del/dump): [bridge, mac, vlan] or [bridge_port, mac, vlan, flags=[NTF_MASTER]] or [dev, mac, [vni|vlan], flags=[NTF_SELF]] Signed-off-by:
-
David S. Miller authored
Marek Vasut says: ==================== net: dsa: ksz: Clean up the tag code in prep for more switches Clean up the KSZ DSA tag code in preparation for adding more switches. ==================== Signed-off-by: -
Marek Vasut authored
In case the destination address is link local, add override bit into the switch tag to let such a packet through the switch even if the port is blocked. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Tristram Ha authored
Factor out common code from the tag_ksz , so that the code can be used with other KSZ family switches which use differenly sized tags. Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Tristram Ha authored
Rename the tag Kconfig option and related macros in preparation for addition of new KSZ family switches with different tag formats. Signed-off-by:
-
Jakub Kicinski authored
FW team asks to be able to not support RED even if NIC is capable of buffering for testing and experimentation. Add an opt-out flag. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
David S. Miller authored
This reverts commit ec49d83f. Cause build failures when DCCP is modular. ERROR: "inet_hashinfo2_init" [net/dccp/dccp.ko] undefined! Signed-off-by:
-
David Ahern authored
Similar to routes and rules, add protocol attribute to neighbor entries for easier tracking of how each was created. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Peter Oskolkov authored
This patch adds coverage of DCCP to reuseport_addr_any selftest. Signed-off-by:
Peter Oskolkov <posk@google.com> Signed-off-by:
-
Peter Oskolkov authored
Commit d9fbc7f6 "net: tcp: prefer listeners bound to an address" removes port-only listener lookups. This caused segfaults in DCCP lookups because DCCP did not initialize the (addr,port) hashtable. This patch adds said initialization. The only non-trivial issue here is the size of the new hashtable. It seemed reasonable to make it match the size of the port-only hashtable (= INET_LHTABLE_SIZE) that was used previously. Other parameters to inet_hashinfo2_init() match those used in TCP. Tested: syzcaller issues fixed; the second patch in the patchset tests that DCCP lookups work correctly. Fixes: d9fbc7f6 "net: tcp: prefer listeners bound to an address" Reported-by:
syzcaller <syzkaller@googlegroups.com> Signed-off-by:
-
Sam Protsenko authored
When Protocol Field Compression (PFC) is enabled, the "Protocol" field in PPP packet will be received without leading 0x00. See section 6.5 in RFC 1661 for details. So let's decompress protocol field if needed, the same way it's done in drivers/net/ppp/pptp.c. In case when "nopcomp" pppd option is not enabled, PFC (pcomp) can be negotiated during LCP handshake, and L2TP driver in kernel will receive PPP packets with compressed Protocol field, which in turn leads to next error: Protocol Rejected (unsupported protocol 0x2145) because instead of Protocol=0x0021 in PPP packet there will be Protocol=0x21. This patch unwraps it back to 0x0021, which fixes the issue. Sending the compressed Protocol field will be implemented in subsequent patch, this one is self-sufficient. Signed-off-by:Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by:
-
- 15 Dec, 2018 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-12-14 (VF Lag) From Aviv Heller, Subsequent patches introduce VF LAG, which provdies load-balancing and high-availability capabilities for VFs associated with different physical ports of the same Connect-X card. This series consists of the following: - mlx5 devcom, driver infrastructure that facilitates operations that involve both core devices (physical functions) of the same card, to synchronize and communicate between two driver instances of the same card. - Infrastructure for TC rule duplication. - Changes to LAG logic to enable its use when SR-IOV is enabled - PFs in switchdev mode is the only mode currently supported. ==================== Signed-off-by: -
David S. Miller authored
Paolo Abeni says: ==================== net: mitigate retpoline overhead The spectre v2 counter-measures, aka retpolines, are a source of measurable overhead[1]. We can partially address that when the function pointer refers to a builtin symbol resorting to a list of tests vs well-known builtin function and direct calls. Experimental results show that replacing a single indirect call via retpoline with several branches and a direct call gives performance gains even when multiple branches are added - 5 or more, as reported in [2]. This may lead to some uglification around the indirect calls. In netconf 2018 Eric Dumazet described a technique to hide the most relevant part of the needed boilerplate with some macro help. This series is a [re-]implementation of such idea, exposing the introduced helpers in a new header file. They are later leveraged to avoid the indirect call overhead in the GRO path, when possible. Overall this gives > 10% performance improvement for UDP GRO benchmark and smaller but measurable for TCP syn flood. The added infra can be used in follow-up patches to cope with retpoline overhead in other points of the networking stack (e.g. at the qdisc layer) and possibly even in other subsystems. v2 -> v3: - fix build error with CONFIG_IPV6=m v1 -> v2: - list explicitly the builtin function names in INDIRECT_CALL_*(), as suggested by Ed Cree - expand the recipients list rfc -> v1: - use branch prediction hints, as suggested by Eric [1] http://vger.kernel.org/netconf2018_files/PaoloAbeni_netconf2018.pdf [2] https://linuxplumbersconf.org/event/2/contributions/99/attachments/98/117/lpc18_paper_af_xdp_perf-v2.pdf ==================== Signed-off-by:
-
Paolo Abeni authored
This avoids another indirect call for UDP GRO. Again, the test for the IPv6 variant is performed first. v1 -> v2: - adapted to INDIRECT_CALL_ changes Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect call in the receive path for TCP and UDP packets. TCP takes precedence on UDP, so that we have a single additional conditional in the common case. When IPV6 is build as module, all gro symbols except UDPv6 are builtin, while the latter belong to the ipv6 module, so we need some special care. v1 -> v2: - adapted to INDIRECT_CALL_ changes v2 -> v3: - fix build issue with CONFIG_IPV6=m Signed-off-by:
-
Paolo Abeni authored
This avoids an indirect calls for L3 GRO receive path, both for ipv4 and ipv6, if the latter is not compiled as a module. Note that when IPv6 is compiled as builtin, it will be checked first, so we have a single additional compare for the more common path. v1 -> v2: - adapted to INDIRECT_CALL_ changes Signed-off-by:
-
Paolo Abeni authored
This header define a bunch of helpers that allow avoiding the retpoline overhead when calling builtin functions via function pointers. It boils down to explicitly comparing the function pointers to known builtin functions and eventually invoke directly the latter. The macros defined here implement the boilerplate for the above schema and will be used by the next patches. rfc -> v1: - use branch prediction hint, as suggested by Eric v1 -> v2: - list explicitly the builtin function names in INDIRECT_CALL_*(), as suggested by Ed Cree Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ilias Apalodimas authored
Currently the driver issues 2 mmio reads to figure out the number of transmitted packets and clean them. We can get rid of the expensive reads since BIT 31 of the Tx descriptor can be used for that. We can also remove the budget counting of Tx completions since all of the descriptors are not deliberately processed. Performance numbers using pktgen are: size pre-patch(pps) post-patch(pps) 64 362483 427916 128 358315 411686 256 352725 389683 512 215675 216464 1024 113812 114442 Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Ilias Apalodimas authored
Running pktgen with packets sizes > 512b ends up in the interface Txq getting stuck. "netsec 522d0000.ethernet eth0: netsec_netdev_start_xmit: TxQFull!" appears on dmesg but the interface never recovers. It requires an ifconfig down/up to make the interface usable again. The reason that triggers this, is a race condition between .ndo_start_xmit and the napi completion. The available budget is calculated first and indicates the queue is full. Due to a costly netif_err() the queue is not stopped in time while the napi completion runs, clears the irq and frees up descriptors, thus the queue never wakes up again. Fix this by moving the print after stopping the queue, make the print ratelimited, add barriers and check for cleaned descriptors.. Signed-off-by:
-
Fabrizio Castro authored
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David Ahern authored
Move arp_queue_len_bytes ahead of arp_queue to remove two 4-byte holes. Ensure ha element is always 8-byte aligned. Signed-off-by:
-
Tonghao Zhang authored
Except for returning, the var leaf is not used in the qdisc_leaf(). For simplicity, remove it. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David Ahern authored
A recent commit allows sockets bound to a VRF to receive ipv6 link local packets. However, it only works for UDP and worse TCP connection attempts to the LLA with the only listener bound to the VRF just hang where as before the client gets a reset and connection refused. Fix by adjusting ir_iif for LL addresses and packets received through a device enslaved to a VRF. Fixes: 6f12fa77 ("vrf: mark skb for multicast or link-local as enslaved to VRF") Reported-by:
Donald Sharp <sharpd@cumulusnetworks.com> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by:
-
Heiner Kallweit authored
Improve detection of spurious interrupts by checking against the interrupt mask as currently set in the chip. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yangtao Li authored
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define such a macro, so remove DEFINE_SIMPLE_DEBUGFS_FILE. Also use the DEFINE_SHOW_ATTRIBUTE macro to simplify some code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== net: hns3: Add more commands to Debugfs in HNS3 driver This patch-set adds few more debugfs commands to HNS3 Ethernet Driver. Support has been added to query info related to below items: 1. Packet buffer descriptor ("echo bd info [queue no] [bd index] > cmd") 2. Manager table("echo dump mng tbl > cmd") 3. Dfx status register("echo dump reg ssu [prt id] > cmd") 4. Dcb status register("echo dump reg dcb [port id] > cmd") 5. Queue map ("echo queue map [queue no] > cmd") 6. Tm map ("echo tm map [queue no] > cmd") NOTE: Above commands are *read-only* and are only intended to query the information from the SoC(and dump inside the kernel, for now) and in no way tries to perform write operations for the purpose of configuration etc. Change Log: V1-->V2: 1. Addressed the GCC-8.2 compiler issue reported by David S. Miller. Link: https://lkml.org/lkml/2018/12/14/1298 ==================== Signed-off-by: -
liuzhongzhu authored
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump tm map 100 > cmd queue_id | qset_id | pri_id | tc_id 0100 | 0065 | 08 | 00 root@(none)# Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
liuzhongzhu authored
This patch prints queue map information. debugfs command: echo dump queue map > cmd Sample Command: root@(none)# echo queue map > cmd local queue id | global queue id | vector id 0 32 769 1 33 770 2 34 771 3 35 772 4 36 773 5 37 774 6 38 775 7 39 776 8 40 777 9 41 778 10 42 779 11 43 780 12 44 781 13 45 782 14 46 783 15 47 784 root@(none)# Signed-off-by: -
liuzhongzhu authored
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump reg dcb > cmd roce_qset_mask: 0x0 nic_qs_mask: 0x0 qs_shaping_pass: 0x0 qs_bp_sts: 0x0 pri_mask: 0x0 pri_cshaping_pass: 0x0 pri_pshaping_pass: 0x0 root@(none)# Signed-off-by:
-
liuzhongzhu authored
This patch prints status register information by module. debugfs command: echo dump reg [mode name] > cmd Sample Command: root@(none)# echo dump reg bios common > cmd BP_CPU_STATE: 0x0 DFX_MSIX_INFO_NIC_0: 0xc000 DFX_MSIX_INFO_NIC_1: 0xf DFX_MSIX_INFO_NIC_2: 0x2 DFX_MSIX_INFO_NIC_3: 0x2 DFX_MSIX_INFO_ROC_0: 0xc000 DFX_MSIX_INFO_ROC_1: 0x0 DFX_MSIX_INFO_ROC_2: 0x0 DFX_MSIX_INFO_ROC_3: 0x0 root@(none)# Signed-off-by:
-
liuzhongzhu authored
This patch prints manager table information. debugfs command: echo dump mng tbl > cmd Sample Command: root@(none)# echo dump mng tbl > cmd entry|mac_addr |mask|ether|mask|vlan|mask|i_map|i_dir|e_type 00 |01:00:5e:00:00:01|0 |00000|0 |0000|0 |00 |00 |0 01 |c2:f1:c5:82:68:17|0 |00000|0 |0000|0 |00 |00 |0 root@(none)# Signed-off-by:
-
