- 04 Nov, 2021 3 commits
-
-
Takashi Iwai authored
This reverts commit 2d9ea399. We've got a regression report showing that the audio got broken the device over AMD IOMMU. The conversion assumed the wrong pointer / page mapping for the indirect mapping case, and we need to correct this urgently, so let's revert it for now. Fixes: 2d9ea399 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type") Reported-and-tested-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Link: https://lore.kernel.org/r/20211104180846.16340-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211104155726.2090997-1-perex@perex.czSigned-off-by:
-
Takashi Sakamoto authored
Mark of the Unicorn (MOTU) shipped Traveler mk3 as one of models in third generation of its FireWire series, and discontinued it already. The model consists of below ICs: * Texas Instruments TSB41AB2 * Phillips Semiconductors PDI1394L40 * Altera cyclone EP1C3 * Texas Instruments TMS320VC5402 It supports sampling transfer frequency up to 192.0 kHz. The packet format differs depending on both of current sampling transfer frequency and whether to enable ADAT channels in rx/tx packets. The model supports transmission of PCM frames as well as MIDI messages. The model supports command mechanism to configure internal DSP. Hardware meter information is available in the first 2 chunks of each data block of tx packet. This commit adds support for it. $ cd linux-firewire-tools/src $ python crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410af0a bus_info_length 4, crc_length 16, crc 44810 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 00090911 device_id 0000090911 | EUI-64 0001f20000090911 root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00031733 directory_length 3, crc 5939 42c 120001f2 specifier id 430 1300001b version 434 17102800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 00028484 leaf_length 2, crc 33924 43c 0001f200 company_id 0001f2 | 440 00090911 device_id 0000090911 | EUI-64 0001f20000090911 Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211104110627.94469-1-o-takashi@sakamocchi.jpSigned-off-by:
-
- 03 Nov, 2021 2 commits
-
-
Jeremy Soller authored
On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset microphone input attached to 0x19 that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is applied. This is similar to the existing System76 quirk for ALC293, but for ALC256. Signed-off-by:
Jeremy Soller <jeremy@system76.com> Signed-off-by:
Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.comSigned-off-by:
-
Wang Wensheng authored
When the timer instance was add into ack_list but was not currently in process, the user could stop it via snd_timer_stop1() without delete it from the ack_list. Then the user could free the timer instance and when it was actually processed UAF occurred. This issue could be reproduced via testcase snd_timer01 in ltp - running several instances of that testcase at the same time. What I actually met was that the ack_list of the timer broken and the kernel went into deadloop with irqoff. That could be detected by hardlockup detector on board or when we run it on qemu, we could use gdb to dump the ack_list when the console has no response. To fix this issue, we delete the timer instance from ack_list and active_list unconditionally in snd_timer_stop1(). Signed-off-by:
Wang Wensheng <wangwensheng4@huawei.com> Suggested-by:
-
- 02 Nov, 2021 2 commits
-
-
Takashi Iwai authored
Audient iD14 (2708:0002) may get a control message error that interferes the operation e.g. with alsactl. Add the quirk to ignore such errors like other devices. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191247 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211102161859.19301-1-tiwai@suse.deSigned-off-by:
-
Tim Crawford authored
Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from the internal speakers. Signed-off-by:
-
- 01 Nov, 2021 4 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.16 This is an unusually large set of updates, mostly a large crop of unusually big drivers coupled with extensive overhauls of existing code. There's a SH change here for the DAI format terminology, the change is straightforward and the SH maintainers don't seem very active. - A new version of the audio graph card which supports a wider range of systems. - Move of the Cirrus DSP framework into drivers/firmware to allow for future use by non-audio DSPs. - Several conversions to YAML DT bindings. - Continuing cleanups to the SOF and Intel code. - A very big overhaul of the cs42l42 driver, correcting many problems. - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS, RT5682S, and RT9120 and Rockchip RV1126 and RK3568
-
Jason Ormes authored
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency quirk as well. The device is basically just the HX-Stomp with some more buttons on the face. I've done some recording with it after adding it, and it seems to function properly with this fix. The Midi features appear to be working as well. [ a coding style fix and patch reformat by tiwai ] Signed-off-by:
Jason Ormes <skryking@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.comSigned-off-by:
-
Alexander Tsoy authored
Add another device ID for JBL Quantum 400. It requires the same quirk as other JBL Quantum devices. Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.meSigned-off-by:
-
Takashi Iwai authored
Merge 5.16-devel branch for upstreaming Signed-off-by:
-
- 29 Oct, 2021 29 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Support multiple headphone drivers in same machine driver. In this case, both rt5682 and rt5682s are supported and enumerated by different ACPI HID "10EC5682" and "RTL5682". V2 Changes: - remove useless 'NULL', 'false' in if-condition - can use 'comp_ids' field alone to enumerate driver - add comma to the end of entry in structure initialization - keep the table of byt/cht/cml/icl untouched V3 Changes: - upstreamd from SOF github, PR#3200 - use new compatiable IDs to shrink the enumerate table of BYT and CHT - add 'const' to snd_soc_acpi_codecs structures V4 Changes: - add signoff to patch 4~6 V5 Changes: - none, just rebase for patch 3 conflict Brent Lu (3): ASoC: soc-acpi: add comp_ids field for machine driver matching ASoC: Intel: sof_rt5682: detect codec variant in probe function ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s Pierre-Louis Bossart (3): ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs include/sound/soc-acpi.h | 3 + sound/soc/intel/boards/sof_rt5682.c | 34 ++------- .../intel/common/soc-acpi-intel-adl-match.c | 11 ++- .../intel/common/soc-acpi-intel-bxt-match.c | 2 +- .../intel/common/soc-acpi-intel-byt-match.c | 68 +++++++----------- .../intel/common/soc-acpi-intel-cht-match.c | 69 +++++++------------ .../intel/common/soc-acpi-intel-cml-match.c | 8 +-- .../intel/common/soc-acpi-intel-glk-match.c | 2 +- .../intel/common/soc-acpi-intel-jsl-match.c | 43 ++++-------- .../intel/common/soc-acpi-intel-kbl-match.c | 12 ++-- .../intel/common/soc-acpi-intel-skl-match.c | 2 +- .../intel/common/soc-acpi-intel-tgl-match.c | 11 ++- sound/soc/soc-acpi.c | 24 ++++++- 13 files changed, 119 insertions(+), 170 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: Sanity checks and soc-topology updates" from Cezary Rojewski <cezary.rojewski@intel.com>: Couple of soc-topology related changes and a use-after-free fix. Said fix and two sanity checks for soc-topology lead the way. While the use-after-free is quite obvious, the sanity checks are here to cover for cases where user malformed the topology file -or- access to filesystem somehow got interrupted during copy operation. We shouldn't be reading outside the file boundary. Afterward a change to soc_tplg_add_kcontrol(): device being passed to soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects dev_xxx() invoked later on. Also, device used for topology memory allocations from component->dev to component->card->dev so memory gets freed each time card device (usually platform device) is removed rather than the component device what may happen less frequently. Dummy component gets smarter and no longer overrides hw_params if there are other components accociated with related struct snd_soc_pcm_runtime instance. Amadeusz Sławiński (5): ASoC: core: Remove invalid snd_soc_component_set_jack call ASoC: topology: Check for dapm widget completeness ASoC: topology: Use correct device for prints ASoC: topology: Change topology device to card device ASoC: Stop dummy from overriding hwparams Cezary Rojewski (1): ASoC: topology: Add header payload_size verification sound/soc/soc-core.c | 3 --- sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/soc-utils.c | 13 +++++++++++++ 3 files changed, 43 insertions(+), 7 deletions(-) -- 2.25.1
-
Christophe JAILLET authored
If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'np' must be released. Add the missing 'of_node_put()' call. Fixes: c413983e ("ASoC: rsnd: adjust disabled module") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.frSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Uwe Kleine-König authored
Up to now aic3x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Pierre-Louis Bossart authored
'const' qualifiers are missing on some platforms, add as needed. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by:
-
Pierre-Louis Bossart authored
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by:
-
Brent Lu authored
Use comp_ids field to enumerate rt5682/rt5682s headphone codec for JSL/TGL/ADL devices and remove redundant entries in tables. Signed-off-by:
-
Brent Lu authored
Detect whether the headphone codec is ALC5682I-VS or not in probe function so we don't need to duplicate all board configs for this new variant. Signed-off-by:
-
Brent Lu authored
A machine driver needs to be enumerated by more than one ACPI HID if it supports second headphone driver (i.e. rt5682 and rt5682s). However, the id field in snd_soc_acpi_mach structure could contain only one HID. By adding a 'comp_ids' field which can contain several HIDs, we can enumerate a machine driver by multiple ACPI HIDs. Signed-off-by:
-
Trevor Wu authored
This patch adds document for mt8195 board with mt6359, rt1011 and rt5682 Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
This patch adds support for mt8195 board with mt6359, rt1011 and rt5682. Signed-off-by:
-
Amadeusz Sławiński authored
In case that there are other components assigned to runtime device, depending on order dummy component can override their params with its own, which shouldn't happen. Check if there are any other components assigned to rtd and if so, skip setting hwparams. Occurs when using topology where 'snd-soc-dummy' gets assigned by default as codec and platform component. Alternative approach would be to copy whole dummy handling and rename it to "snd-soc-null" or something similar. And remove hwparams assignment to make it really do nothing. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Topology needs device for prints and resource allocation. So far, component->dev is used. However, this may lead to high memory use in model where card is an independent driver which can be reloaded and topology is loaded from component's probe() method. Every time machine driver is reloaded topology is being loaded anew, each time allocating new memory. Said memory will only be freed when component itself is being freed. Address the problem by tying topology to component->card->dev instead, so memory occupied by the topology is freed whenever related machine device gets removed. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_add_dcontrol() passes device as argument which is later used to print messages. Align it with all other prints in file to use tplg->dev. Signed-off-by:
-
Amadeusz Sławiński authored
Add sanity checks to make sure the data is read within file boundary. Helps in situations where file is only partially copied or malformed. Signed-off-by:
-
Cezary Rojewski authored
Add sanity check to make sure the data is read within file boundary. Helps in situations where file is only partially copied or malformed. Signed-off-by:
-
Amadeusz Sławiński authored
If snd_soc_component_set_jack() is called after snd_soc_component_remove() it may operate on memory which is freed in ->remove handler. Signed-off-by:
-
Vincent Knecht authored
TFA9897 has an internal 'rcv' switch so that it can manage both loudspeaker and earpiece modes with the same physical speaker. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.orgSigned-off-by:
-
Arnd Bergmann authored
The acp-platform driver now needs the ACPI helpers: ld.lld: error: undefined symbol: snd_soc_acpi_find_machine >>> referenced by acp-platform.c >>> soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a ld.lld: error: undefined symbol: snd_soc_acpi_codec_list >>> referenced by acp-renoir.c >>> soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a Other drivers using this interface, select SND_SOC_ACPI, so do the same thing here. Fixes: e646b51f ("ASoC: amd: acp: Add callback for machine driver on ACP") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.orgSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: cs42l42: Fix definition and handling of jack switch invert" from Richard Fitzgerald <rf@opensource.cirrus.com>: Summary: The driver applied the opposite of the DT setting to the wrong register bit. The jack plug detect hardware in cs42l42 is somewhat confusing, compounded by an unclear description in the datasheet. This is most likely the reason that the driver implemented a DT property for the wrong register bit, that had the opposite effect of what was described in the binding. Changing the meaning of the property values isn't feasible; the driver dates from 2016 and the risk of breaking out-of-tree configs is too high (the property is also available to ACPI systems). So the fix is to make the binding doc match the actual behaviour and then fix the driver to apply it to the correct register bit. As a bonus, patch #3 converts the binding to yaml. Richard Fitzgerald (3): ASoC: dt-bindings: cs42l42: Correct description of ts-inv ASoC: cs42l42: Correct configuring of switch inversion from ts-inv ASoC: dt-bindings: cs42l42: Convert binding to yaml .../devicetree/bindings/sound/cirrus,cs42l42.yaml | 225 +++++++++++++++++++++ .../devicetree/bindings/sound/cs42l42.txt | 114 ----------- MAINTAINERS | 1 + sound/soc/codecs/cs42l42.c | 9 +- 4 files changed, 230 insertions(+), 119 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt -- 2.11.0
-
Brent Lu authored
Detect the codec variant in probe function and update DAI link accordingly. Also add an new entry in enumeration table for machine driver enumeration. Signed-off-by:
-
Julian Braha authored
When SND_SOC_MT8192_MT6359_RT1015_RT5682, SND_SOC_MT8192_MT6359_RT1015_RT5682, SND_SOC_MT8183_DA7219_MAX98357A, or SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A is selected, and GPIOLIB is not selected, Kbuild gives the following warnings, respectively: WARNING: unmet direct dependencies detected for SND_SOC_DMIC Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8183_DA7219_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_MT8183 [=y] && I2C [=y] WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8183 [=y] This is because these config options select SND_SOC_RT1015P without selecting or depending on GPIOLIB, despite SND_SOC_RT1015P depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by:
Julian Braha <julianbraha@gmail.com> Acked-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20211029001225.27218-1-julianbraha@gmail.comSigned-off-by:
-
Pierre-Louis Bossart authored
The same codec seems to have different personalities. ESSX8316 was used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake, GeminiLake, JasperLake and TigerLake devices. BugLink: https://github.com/thesofproject/linux/issues/2955 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Richard Fitzgerald authored
The setting from the cirrus,ts-inv property should be applied to the TIP_SENSE_INV bit, as this is the one that actually affects the jack detect block. The TS_INV bit only swaps the meaning of the PLUG and UNPLUG interrupts and should always be 1 for the interrupts to have the normal meaning. Due to some misunderstanding the driver had been implemented to configure the TS_INV bit based on the jack switch polarity. This made the interrupts behave the correct way around, but left the jack detect block, button detect and analogue circuits always interpreting an open switch as unplugged. The signal chain inside the codec is: SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts | v Jack detect, button detect and analog control As the TIP_SENSE_INV already performs the necessary inversion the TS_INV bit never needs to change. It must always be 1 to yield the expected interrupt behaviour. Some extra confusion has arisen because of the additional invert in the interrupt path, meaning that a value applied to the TS_INV bit produces the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv property has therefore always had the opposite effect to what might be expected (0 = inverted, 1 = not inverted). To maintain the meaning of the ts-inv property it must be inverted when applied to TIP_SENSE_INV. Signed-off-by:Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
This swaps the descriptions of the 0 and 1 values to match what the driver actually does with this property. The background here is somewhat confusing. The codec has two invert bits for the tip sense. The DT property should have been for the TIP_SENSE_INV bit, which is the one that controls the detect block. Due to some misunderstanding of the hardware the driver actually implemented setting of the TS_INV bit, which is only for swapping the sense of the interrupt bits. The description was taken from the datasheet and refers to TIP_SENSE_INV but unfortunately TS_INV has a different purpose and the net effect of changing it is the reverse of what was intended (this is not clearly described in the datasheet). So the ts-inv settings have always done the exact opposite of what the description said. Given the age of the driver, it's too late now to swap the meanings of the values, so the description is changed to match the behaviour. They have been annotated with the terminology used in the datasheet to avoid the confusion of which one corresponds to what the datasheet calls "inverted tip sense". Signed-off-by:
-
Takashi Sakamoto authored
Now UAPI of ALSA firewire stack got enough functions to interact with userspace for protocol of MOTU FireWire series. Let's remove the relevant TODO. Signed-off-by:
-
