- 22 Jan, 2009 23 commits
-
-
Vlad Yasevich authored
Recent changes to the retransmit code exposed a long standing bug where it was possible for a chunk to be time stamped after the retransmit timer was reset. This caused a rare situation where the retrnamist timer has expired, but nothing was marked for retrnasmission because all of timesamps on data were less then 1 rto ago. As result, the timer was never restarted since nothing was retransmitted, and this resulted in a hung association that did couldn't complete the data transfer. The solution is to timestamp the chunk when it's added to the packet for transmission purposes. After the packet is trsnmitted the rtx timer is restarted. This guarantees that when the timer expires, there will be data to retransmit. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Commit 62aeaff5 (sctp: Start T3-RTX timer when fast retransmitting lowest TSN) introduced a regression where it was possible to forcibly restart the sctp retransmit timer at the transmission of any new chunk. This resulted in much longer timeout times and sometimes hung sctp connections. Signed-off-by:
-
Vlad Yasevich authored
crc32c algorithm provides a byteswaped result. On little-endian arches, the result ends up in big-endian/network byte order. On big-endinan arches, the result ends up in little-endian order and needs to be byte swapped again. Thus calling cpu_to_le32 gives the right output. Tested-by:
Jukka Taimisto <jukka.taimisto@mail.suomi.net> Signed-off-by:
-
Steve Glendinning authored
All supported SMSC PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by:Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
-
Anton Vorontsov authored
Suspend/resume routines check for phydrv != NULL, but that is wrong because "phydrv" comes from container_of(drv). If drv is NULL, then container_of(drv) will return non-NULL result, and the checks won't work. The Freescale TBI PHYs are driver-less, so "drv" is NULL, and that leads to the following oops: Unable to handle kernel paging request for data at address 0xffffffe4 Faulting instruction address: 0xc0215554 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c0215554] mdio_bus_suspend+0x34/0x70 LR [c01cc508] suspend_device+0x258/0x2bc Call Trace: [cfad3da0] [cfad3db8] 0xcfad3db8 (unreliable) [cfad3db0] [c01cc508] suspend_device+0x258/0x2bc [cfad3dd0] [c01cc62c] dpm_suspend+0xc0/0x140 [cfad3e20] [c01cc6f4] device_suspend+0x48/0x5c [cfad3e40] [c0068dd8] suspend_devices_and_enter+0x8c/0x148 [cfad3e60] [c00690f8] enter_state+0x100/0x118 [cfad3e80] [c00691c0] state_store+0xb0/0xe4 [cfad3ea0] [c018c938] kobj_attr_store+0x24/0x3c [cfad3eb0] [c00ea9a8] flush_write_buffer+0x58/0x7c [cfad3ed0] [c00eadf0] sysfs_write_file+0x58/0xa0 [cfad3ef0] [c009e810] vfs_write+0xb4/0x16c [cfad3f10] [c009ed40] sys_write+0x4c/0x90 [cfad3f40] [c0014954] ret_from_syscall+0x0/0x38 [...] This patch fixes the issue, plus removes unneeded parentheses and fixes indentation level in mdio_bus_suspend(). Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
A link change interrupt might be queued and activated after the loopback was set and it will cause the loopback to fail. The PHY lock should be kept until the loopback test is over. That implies that the bnx2x_test_link should used within the loopback function and not bnx2x_wait_for_link since that function also takes the PHY link Signed-off-by:
-
Eilon Greenstein authored
Waiting for the FW to response requires a memory barrier Signed-off-by:
Michal Kalderon <michals@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
rmmod might hang without this patch since the reference counter is not going down Signed-off-by:
Yitchak Gertner <gertner@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Call carrier off should not be called after register_netdev since after register netdev open can be called at any time followed by an interrupt that will set it to carrier_on and the probe will resume control and set it to off Signed-off-by:
-
Eilon Greenstein authored
Failures on load were not handled correctly - separate the flow to handle different failures Signed-off-by:
-
Eilon Greenstein authored
Calling napi disabled unconditionally at netif stop Signed-off-by:
-
Eilon Greenstein authored
To avoid complications, make sure that the HW is in reset (as it should be) before trying to take it out of reset. In normal flows, the HW is indeed in rest so this should have no effect Signed-off-by:
-
Reinette Chatre authored
be consistent with mac80211 drivers and return correct return code. NETDEV_TX_OK is 0, but we need to be consistent wrt formatting amongst implementations re: http://marc.info/?l=linux-wireless&m=123119327419865&w=2Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Reviewed-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Hin-Tak Leung authored
Giuseppe Cala <jiveaxe@gmail.com> (The second "a" in "Cala" should be a grave, U+00E0) reported success on zd1211-devs@lists.sourceforge.net. The chip info is: zd1211b chip 0df6:0036 v4810 high 00-0c-f6 AL2230_RF pa0 g--N- The Sitecom WL-603 is detected as a zd1211b with a AL2230 RF transceiver chip. Signed-off-by:
Giuseppe Cala <jiveaxe@gmail.com> Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Christian Lamparter authored
In theory, the firmware acks the received a data frame, before signaling the driver to free it again. However Artur Skawina <art.08.09@gmail.com> has shown that it can happen in reverse order as well. This is very bad and could lead to memory corruptions, oopses and panics. Thanks to Artur Skawina <art.08.09@gmail.com> for reporting and debugging this issue. Signed-off-by:
Christian Lamparter <chunkeey@web.de> Tested-by:
Artur Skawina <art.08.09@gmail.com> Signed-off-by:
-
Christian Lamparter authored
If we let the firmware do the data encryption, we have to remove the ICV and (M)MIC at the end of the frame before we can give it back to mac80211. Or, these data frames have a few trailing bytes on cooked monitor interfaces. Signed-off-by:
-
Chr authored
This patch fixes a obvious memory leak in the eeprom parser. Signed-off-by:
-
Pavel Roskin authored
KERN_INFO is too "loud" for messages that are generated by the ordinary events, such as accociation. Use of KERN_DEBUG is consistent with mac80211. Suggested by Michael Gilbert <michael.s.gilbert@gmail.com> Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Ivo van Doorn authored
Mac80211 provides 2 structures to handle bitrates, namely ieee80211_rate and ieee80211_tx_rate. To determine the short preamble mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did). This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Tested-By:
Chris Clayton <chris2553@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
wlan0: switched to short barker preamble (BSSID=00:01:aa:bb:cc:dd) wlan0: switched to short slot (BSSID=) <something is missing here> should be: wlan0: switched to short barker preamble (BSSID=00:01:aa:bb:cc:dd) wlan0: switched to short slot (BSSID=00:01:aa:bb:cc:dd) Signed-off-by:
-
Andrey Borzenkov authored
[ 56.923623] BUG: sleeping function called from invalid context at /home/bor/src/linux-git/mm/slub.c:1599 [ 56.923644] in_atomic(): 0, irqs_disabled(): 1, pid: 3031, name: wpa_supplicant [ 56.923656] 2 locks held by wpa_supplicant/3031: [ 56.923662] #0: (rtnl_mutex){--..}, at: [<c02abd1f>] rtnl_lock+0xf/0x20 [ 56.923703] #1: (&priv->lock){++..}, at: [<dfc840c2>] orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.923782] irq event stamp: 910 [ 56.923788] hardirqs last enabled at (909): [<c01957db>] __kmalloc+0x7b/0x140 [ 56.923820] hardirqs last disabled at (910): [<c0309419>] _spin_lock_irqsave+0x19/0x80 [ 56.923847] softirqs last enabled at (880): [<c0124f54>] __do_softirq+0xc4/0x110 [ 56.923865] softirqs last disabled at (871): [<c01049ae>] do_softirq+0x8e/0xe0 [ 56.923895] Pid: 3031, comm: wpa_supplicant Not tainted 2.6.29-rc2-1avb #1 [ 56.923905] Call Trace: [ 56.923919] [<c01049ae>] ? do_softirq+0x8e/0xe0 [ 56.923941] [<c011ad12>] __might_sleep+0xd2/0x100 [ 56.923952] [<c0195837>] __kmalloc+0xd7/0x140 [ 56.923963] [<c030946a>] ? _spin_lock_irqsave+0x6a/0x80 [ 56.923981] [<dfc840e9>] ? orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.923999] [<dfc840c2>] ? orinoco_ioctl_set_genie+0x52/0x130 [orinoco] [ 56.924017] [<dfc840e9>] orinoco_ioctl_set_genie+0x79/0x130 [orinoco] [ 56.924036] [<c0209325>] ? copy_from_user+0x35/0x130 [ 56.924061] [<c02ffd96>] ioctl_standard_call+0x196/0x380 [ 56.924085] [<c029f945>] ? __dev_get_by_name+0x85/0xb0 [ 56.924096] [<c02ff88f>] wext_handle_ioctl+0x14f/0x230 [ 56.924113] [<dfc84070>] ? orinoco_ioctl_set_genie+0x0/0x130 [orinoco] [ 56.924132] [<c02a3da5>] dev_ioctl+0x495/0x570 [ 56.924155] [<c0293e05>] ? sys_sendto+0xa5/0xd0 [ 56.924171] [<c0142fe8>] ? mark_held_locks+0x48/0x90 [ 56.924183] [<c0292880>] ? sock_ioctl+0x0/0x280 [ 56.924193] [<c029297d>] sock_ioctl+0xfd/0x280 [ 56.924203] [<c0292880>] ? sock_ioctl+0x0/0x280 [ 56.924235] [<c01a51d0>] vfs_ioctl+0x20/0x80 [ 56.924246] [<c01a53e2>] do_vfs_ioctl+0x72/0x570 [ 56.924257] [<c0293e62>] ? sys_send+0x32/0x40 [ 56.924268] [<c02947c0>] ? sys_socketcall+0x1d0/0x2a0 [ 56.924280] [<c010339f>] ? sysenter_exit+0xf/0x16 [ 56.924292] [<c01a5919>] sys_ioctl+0x39/0x70 [ 56.924302] [<c0103371>] sysenter_do_call+0x12/0x31 Signed-off-by:Andrey Borzenkov <arvidjaar@mail.ru> Cc: stable@kernel.org Signed-off-by:
-
Brian Cavagnolo authored
After launching mesh discovery in tx path, reference count was not being decremented. This was preventing module unload. Signed-off-by:
Brian Cavagnolo <brian@cozybit.com> Signed-off-by:
Andrey Yurovsky <andrey@cozybit.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
- 21 Jan, 2009 3 commits
-
-
Christian Eggers authored
mcs7830_set_reg() and mcs7830_get_reg() are called with buffers from stack which must not be used directly for USB transfers. This causes corruption of the stack particulary on non x86 architectures because DMA may be used for these transfers. Signed-off-by:
Christian Eggers <christian.eggers@kathrein.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Steve Glendinning authored
Improve usbnet's devdbg to always type-check diagnostic arguments, like dev_dbg (device.h). This makes no change to the resulting size of usbnet modules. This patch also removes an #ifdef DEBUG directive from rndis_wlan so it's devdbg statements are always type-checked at compile time. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Patrick McHardy authored
Caused by call to request_module() while holding nf_conntrack_lock. Reported-and-tested-by:
Kövesdi György <kgy@teledigit.hu> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
- 20 Jan, 2009 14 commits
-
-
Herbert Xu authored
The previous fix to paged packets broke the merging because it reset the skb->len before we added it to the merged packet. This wasn't detected because it simply resulted in the truncation of the packet while the missing bit is subsequently retransmitted. The fix is to store skb->len before we clobber it. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
When a frag is shorter than an Ethernet header, we'd return a zeroed packet instead of aborting. This patch fixes that. Signed-off-by:
-
Herbert Xu authored
We need to perform skb_postpull_rcsum after pulling the IPv6 header in order to maintain the correctness of the complete checksum. This patch also adds a missing iph reload after pulling. Signed-off-by:
-
roel kluin authored
while(--j >= 0) keeps spinning when j is unsigned: Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Brice Goglin authored
Don't forget to call pci_disable_device() in myri10ge_remove() and when myri10ge_probe() fails. By the way, update the copyright years. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Jiri Slaby authored
register_pernet_gen_subsys omits mutex_unlock in one fail path. Fix it. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
-
David S. Miller authored
This reverts commit fc8c7dc1. As indicated by Jiri Klimes, this won't work. These numbers are not only used the size validation, they are also used to locate attributes sitting after the message. Signed-off-by:
-
Inaky Perez-Gonzalez authored
Roel Kluin reported a bug in two error paths where skbs were wrongly being freed using kfree(). He provided a fix where it was replaced to kfree_skb(), as it should be. However, in i2400mu_rx(), the error path was missing returning an indication of the failure. Changed to reset rx_skb to NULL and return it to the caller, i2400mu_rxd(). It will be treated as a transient error and just ignore the packet. Depending on the buffering conditions inside the device, the data packet might be dropped or the device will signal the host again for data-ready-to-read and the host will retry. Signed-off-by:
Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
-
Gabriel Paubert authored
Contrary to what the docs say, the 'extended interrupt cause' bit in the interrupt cause register (bit 1) appears to not be maskable on at least some of the mv643xx_eth platforms, making writing zeroes to the interrupt mask register but not the extended interrupt mask register insufficient to stop interrupts from occuring. Therefore, also write zeroes to the extended interrupt mask register when shutting down the port. This fixes the interrupt storm seen on the Pegasos board when shutting down the interface. Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
Lennert Buytenhek authored
Commit 66e63ffb ("mv643xx_eth: implement ->set_rx_mode()") cleaned up mv643xx_eth's multicast filter programming, but broke it as well. The non-special multicast filter table (for multicast addresses that are not of the form 01:00:5e:00:00:xx) consists of 256 hash table buckets organised as 64 32-bit words, where the 'accept' bits are in the LSB of each byte, so in bits 24 16 8 0 of each 32-bit word. The old code got this right, but the referenced commit broke this by using bits 3 2 1 0 instead. This commit fixes this up. Signed-off-by:
-
Lennert Buytenhek authored
This reverts commit cd4ccf76. On the Pegasos board, we can't do DMA burst that are longer than one cache line. For now, go back to using 32 byte DMA bursts for all mv643xx_eth platforms -- we can switch the ARM-based platforms back to doing long 128 byte bursts in the next development cycle. Signed-off-by:
Alan Curry <pacman@kosh.dhis.org> Reported-by:
Gabriel Paubert <paubert@iram.es> Signed-off-by:
-
Jarek Poplawski authored
The trick in socket splicing where we try to convert the skb->data into a page based reference using virt_to_page() does not work so well. The idea is to pass the virt_to_page() reference via the pipe buffer, and refcount the buffer using a SKB reference. But if we are splicing from a socket to a socket (via sendpage) this doesn't work. The from side processing will grab the page (and SKB) references. The sendpage() calls will grab page references only, return, and then the from side processing completes and drops the SKB ref. The page based reference to skb->data is not enough to keep the kmalloc() buffer backing it from being reused. Yet, that is all that the socket send side has at this point. This leads to data corruption if the skb->data buffer is reused by SLAB before the send side socket actually gets the TX packet out to the device. The fix employed here is to simply allocate a page and copy the skb->data bytes into that page. This will hurt performance, but there is no clear way to fix this properly without a copy at the present time, and it is important to get rid of the data corruption. With fixes from Herbert Xu. Tested-by:
Willy Tarreau <w@1wt.eu> Foreseen-by:
Changli Gao <xiaosuo@gmail.com> Diagnosed-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Matt Carlson authored
This patch modifies how the tg3 driver handles device firmware. The patch starts by consolidating David Woodhouse's earlier patch under the same name. Specifically, the patch moves the request_firmware call into a separate tg3_request_firmware() function and calls that function from tg3_open() rather than tg3_init_one(). The patch then goes on to limit the number of devices that will make request_firmware calls. The original firmware patch unnecessarily requested TSO firmware for devices that did not need it. This patch reduces the set of devices making TSO firmware patches to approximately the following device set : 5703, 5704, and 5705. Finally, the patch reduces the effects of a request_firmware() failure. For those devices that are requesting TSO firmware, the driver will turn off the TSO capability. If TSO firmware becomes available at a later time, the device can be closed and then opened again to reacquire the TSO capability. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
