These bindings are already (better) described in soc/bcm/brcm,bcm2835-pm.yaml.
Drop these obsolete bindings.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ZdC/624d1c8O3NRG@standask-GA-A55M-S2HPSigned-off-by: Rob Herring <robh@kernel.org>

The servers for the @codeaurora domain are long retired and any messages
sent there will bounce. Sai has left the company and appears no longer
active in the community which leaves this binding orphaned. Rajendra Nayak
has volunteered to take over as maintainer.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/r/20240223161455.4009469-1-quic_jhugo@quicinc.comSigned-off-by: Rob Herring <robh@kernel.org>

For most nodes with a compatible property a platform device is created.
For some an amba device is created instead. For the latter
of_amba_device_create() emits a message at debug level about the node
the device is created from. Add a similar message to
of_platform_device_create_pdata() to inform about the whole list of
created devices.

This also gives the right context for the following messages that
inform about created child devices.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240222153119.2026363-2-u.kleine-koenig@pengutronix.deSigned-off-by: Rob Herring <robh@kernel.org>

i.MX6UL(L) uses "fsl,imx6sx-lcdif" as fallback compatible string,
but has only very lightweight DISPLAY power domain. Its DISPLAY
power domain is not supported by the binding / Linux kernel at
the moment. Since the current setup is working, let's remove the
power-domain from being required for that platform to fix the warning
printed by CHECK_DTBS=y.

Fixes: f62678a7 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240224213240.1854709-7-sre@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

A new check for vendor-prefixes used in compatibles finds some missing
ones. Add the missing ones already in use.

This omits some ancient prefixes in powerpc and arm32 as there are a
bunch of out of business one-offs that take too much time to track down
who they were.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216025839.902288-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert the existing DT binding to DT schema of the Atmel's HLCDC display
controller.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240202001733.91455-2-dharma.b@microchip.comSigned-off-by: Rob Herring <robh@kernel.org>

All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.

- R9A07G043U              - RZ/G2UL
- R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
- R9A07G054               - RZ/V2L
- R9A08G045               - RZ/G3S

For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0

Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.

Fixes: 96fed779 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213085912.56600-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Rob Herring <robh@kernel.org>

Devicetree binding maintainers expect the example DTS in a binding to
show the usage of only this one particular binding, without unrelated
device nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add to the list of schema contents expected keywords with their
explanation: additionalProperties and unevaluatedProperties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

The 'title' and 'description' fields in Devicetree schema is supposed to
describe hardware, not the binding itself.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212150524.81819-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208105327.129159-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

SmartRG described itself as a CPE manufacturer and produced few home
network devices (e.g. wireless routers). Their SmartRG SR400ac router
(smartrg,sr400ac) is covered by in-Linux DT binding and DTS file.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212140839.27150-1-zajec5@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Apparently on Qualcomm SM8550 and SM8650 the FastRPC compute callbacks
are DMA coherent:

  sm8650-qrd.dtb: fastrpc: compute-cb@2: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240212110827.59302-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Kernel test robot reports sparse warning:
sparse warnings: (new ones prefixed by >>)
>> drivers/of/base.c:1337:73: sparse: sparse: incorrect type in initializer
   (different base types) @@  expected restricted __be32 @@  got int @@
   drivers/of/base.c:1337:73: sparse:     expected restricted __be32
   drivers/of/base.c:1337:73: sparse:     got int

Thus, Make explicit conversions to mute warning(Although BE and LE are
exactly same in binary representation for 0/~0).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402042134.GEb3Bgwl-lkp@intel.com/Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240205024033.3572617-1-dawei.li@shingroup.cnSigned-off-by: Rob Herring <robh@kernel.org>

Adding myself as a second maintainer for Open Firmware and Device Tree
to help Rob out with reviews and other maintainer work.

Cc: devicetree@vger.kernel.org
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240210231513.111117-1-saravanak@google.comSigned-off-by: Rob Herring <robh@kernel.org>

The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "i2c-parent" is
the former and needs to constrain each entry to a single phandle value.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240124190552.1551929-2-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

The I2C de-mux is different than an I2C mux, so i2c-mux.yaml is not
relevant and shouldn't be referenced.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240124190552.1551929-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Add i.MX95 flexcan which is compatible i.MX93 flexcan
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240122091738.2078746-1-peng.fan@oss.nxp.comSigned-off-by: Rob Herring <robh@kernel.org>

Because of of_graph_get_endpoint_count() doesn't report error,
just return count of endpoint, the return type should be unsigned.
Tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/87plxbcvzb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Rob Herring <robh@kernel.org>

of_graph_get_endpoint_count() doesn't have kerneldoc. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/87r0hrcvzk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Rob Herring <robh@kernel.org>

Sort entries alphanumerically.  This was a semi manual job with help of:

  cat Documentation/devicetree/bindings/trivial-devices.yaml | grep '    - ' > old
  cat old | sort -n > new
  diff -ubB old new
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240201075805.7492-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Make the pattern matching node names a bit stricter to improve DTS
consistency.  The pattern is restricted to -N suffixes to decimal
numbers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20240109082511.15278-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate
dt-entries as well as any future additions to yaml.
Change in clocks is due to IP is itself configurable and
only the first two clocks are in all combinations. The last
6 clocks can be present in some of them. It means order is
not really fixed and any combination is possible.
Interrupt may or may not be present.
The documentation for sd-fec bindings is now YAML, so update the
MAINTAINERS file.
Update the link to the new yaml file in xilinx_sdfec.rst.
Signed-off-by: Dragan Cvetic <dragan.cvetic@amd.com>
Link: https://lore.kernel.org/r/20240131170650.530079-1-dragan.cvetic@amd.comSigned-off-by: Rob Herring <robh@kernel.org>

Convert the generic fpga region DT binding to json-schema.
There are some differences compare to txt version.
1. DT overlay can't be described in example that's why directly include
information from overlay to node which was referenced. It is visible in
example with /* DT Overlay contains: &... */

2. All example have been rewritten to be simpler and describe only full
reconfiguration and partial reconfiguration with one bridge.
Completely drop the case where fpga region can inside partial
reconfiguration region which is already described in description

3. Fixed some typos in descriptions compare to txt version but most of it
is just c&p from txt file.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/37b107d86b39ef4bc9c482b57b27de8b92c3fa43.1706530726.git.michal.simek@amd.comSigned-off-by: Rob Herring <robh@kernel.org>

I never really implemented any filtering on the "+dt" sub-address, so
drop it.

Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for I2C
Link: https://lore.kernel.org/r/20240122211528.1719994-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Frank retired a while back and surprisingly has found better things to
do than DT maintainership. Thank you Frank for all of your help with DT
for many years.

Link: https://lore.kernel.org/r/20240122211501.1719374-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240123060804.32254-1-zajec5@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

There are cases where an unavailable port is not an error, making this
error message a false-positive. Since commit d56de8c9 ("usb: typec:
tcpm: try to get role switch from tcpc fwnode") the role switch is tried
on the port dev first and tcpc fwnode afterwards. If using the latter
bindings getting from port dev fails every time. The kernel log is flooded
with the messages like:
 OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/usb-typec@50
Silence this message by making it a debug message.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240117083206.2901534-1-alexander.stein@ew.tq-group.comSigned-off-by: Rob Herring <robh@kernel.org>

Infineon DPS310 is a barometric pressure and temperature sensor.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240116183734.3944028-3-ninad@linux.ibm.comSigned-off-by: Rob Herring <robh@kernel.org>

ASoC, media, regulators and SPI subsystems prefer commits starting with
subsystem name (e.g. "spi: dt-bindings:"), so document this to avoid
confusing contributors.

Cc: Mark Brown <broonie@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240108083750.16350-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

New bindings in TXT format are not accepted and DT schema format expects
all compatibles to be explicitly defined, thus guidance about "wildcard
<chip>" is not correct anymore.  Drop that paragraph and update one more
place which still mentions TXT files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240108083750.16350-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

The undocumented compatibles in the examples are down to just a few
left. Turn on the warning by default. The increased visibility should
get the remaining warnings fixed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128221008.4050638-2-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>