iproute2 build needs tc_nat.h header from kernel make install_headers.
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a trivial fix of debug message.
When a persist flag is set, the message should say "enabled".
Signed-off-by: Toyo Abe <tabe@miraclelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some users do "modprobe ip_conntrack hashsize=...". Since we have the
module aliases this loads nf_conntrack_ipv4 and nf_conntrack, the
hashsize parameter is unknown for nf_conntrack_ipv4 however and makes
it fail.

Allow to specify hashsize= for both nf_conntrack and nf_conntrack_ipv4.

Note: the nf_conntrack message in the ringbuffer will display an
incorrect hashsize since nf_conntrack is first pulled in as a
dependency and calculates the size itself, then it gets changed
through a call to nf_conntrack_set_hashsize().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes mac80211 warn (once) when the driver passes up a
frame in which the payload data is not aligned on a four-byte
boundary, with a long comment for people who run into the condition
and need to know what to do.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The station cleanup timer runs every ten seconds, the exact
timing is not relevant at all so it can well run together with
other things to save power.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  cmd64x: fix hwif->chipset setup
  MAINTAINERS: update ide-cd entry
  ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
  ide-cd: fix error message in cdrom_pc_intr()
  ide-cd: add error message for DMA error to cdrom_read_intr()
  ide-cd: fix error messages in cdrom_write_intr()
  ide-cd: add missing 'ireason' masking to cdrom_write_intr()
  ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
  ide-cd: use ide_cd_release() in ide_cd_probe()
  ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
  ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
  drivers/ide/: Spelling fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (6876): ivtv: mspx4xx needs a longer i2c udelay
  V4L/DVB (6871): Kconfig: VIDEO_CX23885 must select DVB_LGDT330X

This reverts commit fbdcf18d.

As pointed out by Yanmin Zhang, the problem was already fixed
differently (and correctly), and rather than fix anything, it actually
causes us to create a sub-optimal sched-domains hierarchy (not setting
up the domain belonging to the core) when CONFIG_X86_HT=y.
Requested-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 528a572d ("ide: add ->chipset field
to ide_pci_device_t") broke hwif->chipset setup (it is now set to ide_cmd646
for CMD648 instead of CMD646).  It seems that the breakage happend while
I was moving patches around (cmd64x_chipsets[] entries for CMD646 and CMD648
are identical except for 'name' field).  Fix it and bump driver version.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Reopen ide-cd for maintainership.
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mask 'ireason' variable so only the valid interrupt reason bits
will be reported on "drive appears confused" error.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mask 'ireason' variable with 0x3 so the valid interrupt reason value
is passed to cdrom_write_check_ireason() for checking.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use ide_cd_release() to do the cleanup if ide_cdrom_setup() fails.

It fixes:
- the default drive->dsc_overlap value not being restored
- the default drive->queue's prep_rq_fn not being restored
- struct gendisk 'g' not being freed
- wrong function name being reported on unregister_cdrom() error
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
  by adding missing le16_to_cpu() calls.

While at it:
* Replace ntohs() by be16_to_cpu().
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

cdi->mask is cleared by ide_cdrom_register() which is called after the quirk.

Fix it by adding new ->no_speed_select flag to struct ide_cd_config_flags
and using it in ide_cdrom_register() to set CDC_SELECT_SPEED flag.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  Modules: fix memory leak of module names
  UIO: Add a MAINTAINERS entry for Userspace I/O

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: New device ID for the CP2101 driver
  USB: VID/PID update for sierra
  USB: Unbreak fsl_usb2_udc

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  MACB: clear transmit buffers properly on transmit underrun
  3c359 endianness annotations and fixes
  fec_mpc52xx: write in C...
  3c574 and 3c589 endianness fixes (.24?)
  rrunner: use offsetof() instead of homegrown insanity
  r8169 endianness
  dl2k endianness fixes (.24 fodder?)
  yellowfin: annotations and fixes (.24 fodder?)
  asix fixes
  cycx: annotations and fixes (.24 fodder?)
  typhoon: trivial endianness annotations
  typhoon: memory corruptor on big-endian if TSO is enabled
  typhoon: missed rx overruns on big-endian
  typhoon: set_settings broken on big-endian
  typhoon: missing le32_to_cpu() in get_drvinfo
  typhoon: endianness bug in tx/rx byte counters
  ipw2200: prevent alloc of unspecified size on stack
  iwlwifi: fix possible priv->mutex deadlock during suspend
  p54: add Kconfig description
  rtl8187: Add USB ID for Sitecom WL-168 v1 001

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 5a52bd4a introduced a subtle logic
change in tty_wait_until_sent().  The original version would only error out
of the 'do { ...  } while (timeout)' loop if signal_pending() evaluated to
true; a timeout or break due to an empty buffer would fall out of the loop
and into the tty->driver->wait_until_sent handling.  The current
implementation will error out on either a pending signal or an empty
buffer, falling through to the tty->driver->wait_until_sent handling only
on a timeout.

The ->wait_until_sent() will not be reached if the buffer empties before
timeout jiffies have elapsed.  This behavior differs from that prior to commit
5a52bd4a.

I turned this up while using a little serial download utility to bootstrap an
ARM-based eval board.  The util worked fine on 2.6.22.x, but consistently
failed on 2.6.23.x.  Once I'd determined that, I narrowed things down with git
bisect, and found the above difference in logic in tty_wait_until_sent() by
inspection.

This change reverts the logic flow in tty_wait_until_sent() to match that
prior to the aforementioned commit.
Signed-off-by: Cory T. Tusar <ctusar@videon-central.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered.  As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.

This is a resend of the earlier patch a couple of weeks ago, since there
was no reply.  Original thread is at http://lkml.org/lkml/2007/11/28/94Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Init section confusion.  There will likely be some other similar
issues, introduced by I'm-not-sure-what-patch.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Zhe Jiang noticed that its possible to underflow pl->events in
prop_norm_percpu() when the value returned by percpu_counter_read() is less
than the error on that read and the period delay > 1.  In that case half might
not trigger the batch increment and the value will be identical on the next
iteration, causing the same half to be subtracted again and again.

Fix this by rewriting the division as a single subtraction instead of a
subtraction loop and using percpu_counter_sum() when the value returned by
percpu_counter_read() is smaller than the error.

The latter is still needed if we want pl->events to shrink properly in the
error region.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Jiang Zhe <zhe.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This stray down would cause a permanent sleep which doesn't seem correct.
The other uses of this semaphore appear fairly mutex like it's even
initialized with init_MUTEX() ..  So here a patch for removing this one
down().
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

L: entries should be email addresses
Change L:http entries to W:http
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thanks to Jeff Moyer for pointing this out.

If the RDWR dentry_open() in ecryptfs_init_persistent_file fails,
it will do a dput/mntput.  Need to re-take references if we
retry as RDONLY.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mike Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thanks to Josef Bacik for finding these.

A couple of ecryptfs error paths don't properly unlock things they locked.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Josef Bacik <jbacik@redhat.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should send quota message to netlink only once when hardlimit is
reached.  Otherwise user could easily make the system busy by trying to
exceed the hardlimit (and also the messages could be anoying if you cannot
stop writing just now).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix computation of size of skb needed for quota message.  We should use
netlink provided functions and not just an ad-hoc number.  Also don't print
the return value from nla_put_foo() as it is always -1.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Passing a cipher name > 32 chars on mount results in an overflow when the
cipher name is printed, because the last character in the struct
ecryptfs_key_tfm's cipher_name string was never zeroed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

quicklists must keep even off node pages on the quicklists until the TLB
flush has been completed.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

attached please find a new device ID for CP2101 driver. This device is a
usb stick from Dynastream to communicate with ANT wireless devices which
I suppose is fairly similar to the ANT dev board having product id 0x1003.

From: Martin Kusserow <kusserow@ife.ee.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Adds VID/PID for the MC8775 found internally in the Thinkpad X61s laptop
(and likely others). For commercial reasons the driver maintainer cannot
add VID/PIDs for laptop OEM devices himself.
Signed-off-by: Kevin R Page <linux-kernel@krp.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>