- 11 Jan, 2016 24 commits
-
-
David Henningsson authored
commit 02f6ff90 upstream. On the internal mic of the Packard Bell DOTS, one channel has an inverted signal. Add a quirk to fix this up. BugLink: https://bugs.launchpad.net/bugs/1523232Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit a74a8216 upstream. rme96 driver needs to reset DAC depending on the sample rate, and this results in resetting to the max volume suddenly. It's because of the missing call of snd_rme96_apply_dac_volume(). However, calling this function right after the DAC reset still may not work, and we need some delay before this call. Since the DAC reset and the procedure after that are performed in the spinlock, we delay the DAC volume restore at the end after the spinlock. Reported-and-tested-by:
Sylvain LABOISNE <maeda1@free.fr> Signed-off-by:
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 642c2d67 upstream. Dmitry reported a fairly silly recursive lock deadlock for PERF_EVENT_IOC_PERIOD, fix this by explicitly doing the inactive part of __perf_event_period() instead of calling that function. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: c7999c6f ("perf: Fix PERF_EVENT_IOC_PERIOD migration race") Link: http://lkml.kernel.org/r/20151130115615.GJ17308@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ken Xue authored
commit 4fd41a85 upstream. The routines in scsi_pm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by checking q->dev in block layer before handle runtime PM. Since ses doesn't define any PM callbacks and call blk_pm_runtime_init(), the crash won't occur. This fixes Bugzilla #101371. https://bugzilla.kernel.org/show_bug.cgi?id=101371 More discussion can be found from below link. http://marc.info/?l=linux-scsi&m=144163730531875&w=2Signed-off-by:
Ken Xue <Ken.Xue@amd.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Xiangliang Yu <Xiangliang.Yu@amd.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Terry <Michael.terry@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 5377adb0 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit f9fa1887 upstream. qset_fill_page_list() do not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Yang authored
commit 464ad8c4 upstream. When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by:
Hans Yang <hansy@nvidia.com> Acked-by:
-
Guillaume Delbergue authored
commit d5d4fdd8 upstream. This patch is specifically for PCI support on the Versatile PB board using a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For example, on QEMU, the SCSI driver is unable to request the IRQ. To fix this issue, this patch replaces the current dynamic mechanism with a static value as is done in the non-DT case. Signed-off-by:
Guillaume Delbergue <guillaume.delbergue@greensocs.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Al Viro authored
commit 9225c0b7 upstream. missing get_user() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dmitry Katsubo authored
commit 9fa62b1a upstream. The patch extends the family of SATA-to-USB JMicron adapters that need FUA to be disabled and applies the same policy for uas driver. See details in http://unix.stackexchange.com/questions/237204/Signed-off-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Tested-by:
-
Mikulas Patocka authored
commit d98f1cd0 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Xiangliang Yu authored
commit 023113d2 upstream. Current code doesn't update port value of Port Multiplier(PM) when sending FIS of softreset to device, command will fail if FBS is enabled. There are two ways to fix the issue: the first is to disable FBS before sending softreset command to PM device and the second is to update port value of PM when sending command. For the first way, i can't find any related rule in AHCI Spec. The second way can avoid disabling FBS and has better performance. Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 025af189 upstream. In ttm_write_lock(), the uninterruptible path should call __ttm_write_lock() not __ttm_read_lock(). This fixes a vmwgfx hang on F23 start up. syeh: Extracted this from one of Thomas' internal patches. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Jan Kara authored
commit bc23f0c8 upstream. Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by:
Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
David Turner authored
commit a4dad1ae upstream. In ext4, the bottom two bits of {a,c,m}time_extra are used to extend the {a,c,m}time fields, deferring the year 2038 problem to the year 2446. When decoding these extended fields, for times whose bottom 32 bits would represent a negative number, sign extension causes the 64-bit extended timestamp to be negative as well, which is not what's intended. This patch corrects that issue, so that the only negative {a,c,m}times are those between 1901 and 1970 (as per 32-bit signed timestamps). Some older kernels might have written pre-1970 dates with 1,1 in the extra bits. This patch treats those incorrectly-encoded dates as pre-1970, instead of post-2311, until kernel 4.20 is released. Hopefully by then e2fsck will have fixed up the bad data. Also add a comment explaining the encoding of ext4's extra {a,c,m}time bits. Signed-off-by:
David Turner <novalis@novalis.org> Signed-off-by:
Mark Harris <mh8928@yahoo.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732Signed-off-by:
-
Jonas Jonsson authored
commit a0e80fbd upstream. The flash loader has been seen on a Telit UE910 modem. The flash loader is a bit special, it presents both an ACM and CDC Data interface but only the latter is useful. Unless a magic string is sent to the device it will disappear and the regular modem device appears instead. Signed-off-by:
Jonas Jonsson <jonas@ludd.ltu.se> Tested-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jonas Jonsson authored
commit f33a7f72 upstream. Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by:
-
Konstantin Shkolnyy authored
commit 7c90e610 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by:
Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 231bfe53 upstream. WARN_ON() only takes a condition argument. I have changed these to WARN() instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Felipe Balbi authored
commit 391e6dcb upstream. pxa27x disconnects pullups on suspend but doesn't notify the gadget driver about it, so gadget driver can't disable the endpoints it was using. This causes problems on resume because gadget core will think endpoints are still enabled and just ignore the following usb_ep_enable(). Fix this problem by calling gadget_driver->disconnect(). Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: - file rename: drivers/usb/gadget/udc/pxa27x_udc.c -> drivers/usb/gadget/pxa27x_udc.c ] Signed-off-by:
-
Roman Gushchin authored
commit 3ca8138f upstream. I got a report about unkillable task eating CPU. Further investigation shows, that the problem is in the fuse_fill_write_pages() function. If iov's first segment has zero length, we get an infinite loop, because we never reach iov_iter_advance() call. Fix this by calling iov_iter_advance() before repeating an attempt to copy data from userspace. A similar problem is described in 124d3b70 ("fix writev regression: pan hanging unkillable and un-straceable"). If zero-length segmend is followed by segment with invalid address, iov_iter_fault_in_readable() checks only first segment (zero-length), iov_iter_copy_from_user_atomic() skips it, fails at second and returns zero -> goto again without skipping zero-length segment. Patch calls iov_iter_advance() before goto again: we'll skip zero-length segment at second iteraction and iov_iter_fault_in_readable() will detect invalid address. Special thanks to Konstantin Khlebnikov, who helped a lot with the commit description. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: ea9b9907 ("fuse: implement perform_write") Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 05 Jan, 2016 16 commits
-
-
Andrew Honig authored
commit 0185604c upstream. Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by:
Andy Honig <ahonig@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Moritz Muehlenhoff <jmm@inutil.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
David Howells authored
commit b4a1b4f5 upstream. This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Cc: Moritz Muehlenhoff <jmm@inutil.org> Signed-off-by:
-
David Sterba authored
commit 9dcbeed4 upstream. The calculation of range length in btrfs_sync_file leads to signed overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin. https://forums.grsecurity.net/viewtopic.php?f=1&t=4284 The fsync call passes 0 and LLONG_MAX, the range length does not fit to loff_t and overflows, but the value is converted to u64 so it silently works as expected. The minimal fix is a typecast to u64, switching functions to take (start, end) instead of (start, len) would be more intrusive. Coccinelle script found that there's one more opencoded calculation of the length. <smpl> @@ loff_t start, end; @@ * end - start </smpl> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> [ kamal: backport to 3.13-stable: use len in both btrfs_wait_ordered_range calls, like b659ef02 Btrfs: avoid syncing log in the fast fsync path when not necessary ] Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Sasha Levin authored
commit 119d6f6a upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oleg@redhat.com Fixes: 9067ac85 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.comSigned-off-by:
-
Andrew Lunn authored
commit 4eba7bb1 upstream. When a multicast group is joined on a socket, a struct ip_mc_socklist is appended to the sockets mc_list containing information about the joined group. If the interface is hot unplugged, this entry becomes stale. Prior to commit 52ad353a ("igmp: fix the problem when mc leave group") it was possible to remove the stale entry by performing a IP_DROP_MEMBERSHIP, passing either the old ifindex or ip address on the interface. However, this fix enforces that the interface must still exist. Thus with time, the number of stale entries grows, until sysctl_igmp_max_memberships is reached and then it is not possible to join and more groups. The previous patch fixes an issue where a IP_DROP_MEMBERSHIP is performed without specifying the interface, either by ifindex or ip address. However here we do supply one of these. So loosen the restriction on device existence to only apply when the interface has not been specified. This then restores the ability to clean up the stale entries. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 52ad353a "(igmp: fix the problem when mc leave group") Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Marcin Wojtas authored
commit dc1aadf6 upstream. A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
-
Marcin Wojtas authored
commit e5bdf689 upstream. MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
-
Marcin Wojtas authored
commit db6ba9a5 upstream. This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by:
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Christoph Biedl authored
commit 19cebbcb upstream. Commit 35a4a573 ("isdn: clean up debug format string usage") introduced a safeguard to avoid accidential format string interpolation of data when calling debugl1 or HiSax_putstatus. This did however not take into account VHiSax_putstatus (called by HiSax_putstatus) does *not* call vsprintf if the head parameter is NULL - the format string is treated as plain text then instead. As a result, the string "%s" is processed literally, and the actual information is lost. This affects the isdnlog userspace program which stopped logging information since that commit. So revert the HiSax_putstatus invocations to the previous state. Fixes: 35a4a573 ("isdn: clean up debug format string usage") Cc: Kees Cook <keescook@chromium.org> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by:
-
Dmitry V. Levin authored
commit 22eab110 upstream. When restarting a syscall with regs->ax == -ERESTART_RESTARTBLOCK, regs->ax is assigned to a restart_syscall number. For x32 tasks, this syscall number must have __X32_SYSCALL_BIT set, otherwise it will be an x86_64 syscall number instead of a valid x32 syscall number. This issue has been there since the introduction of x32. Reported-by: strace/tests/restart_syscall.test Reported-and-tested-by:
Elvira Khabirova <lineprinter0@gmail.com> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Cc: Elvira Khabirova <lineprinter0@gmail.com> Link: http://lkml.kernel.org/r/20151130215436.GA25996@altlinux.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Xunlei Pang authored
commit 8295c699 upstream. root_domain::rto_mask allocated through alloc_cpumask_var() contains garbage data, this may cause problems. For instance, When doing pull_rt_task(), it may do useless iterations if rto_mask retains some extra garbage bits. Worse still, this violates the isolated domain rule for clustered scheduling using cpuset, because the tasks(with all the cpus allowed) belongs to one root domain can be pulled away into another root domain. The patch cleans the garbage by using zalloc_cpumask_var() instead of alloc_cpumask_var() for root_domain::rto_mask allocation, thereby addressing the issues. Do the same thing for root_domain's other cpumask memembers: dlo_mask, span, and online. Signed-off-by:
Xunlei Pang <xlpang@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit a0af2e53 upstream. A client calling drmSetMaster() using a file descriptor that was opened when another client was master would inherit the latter client's master object and all its authenticated clients. This is unwanted behaviour, and when this happens, instead allocate a brand new master object for the client calling drmSetMaster(). Fixes a BUG() throw in vmw_master_set(). Signed-off-by:
Dave Airlie <airlied@redhat.com> [ luis: backported to 3.16: - drm_setmaster_ioctl() in file drm_stub.c instead of drm_drv.c - adjusted context ] Signed-off-by:
-
Peter Hurley authored
commit 9a37110d upstream. An interface may need to assert a lock invariant and not flood the system logs; add a lockdep helper macro equivalent to lockdep_assert_held() which only WARNs once. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
-
Antonio Quartulli authored
commit 4e39ccac upstream. DFS channels should not be actively scanned as we can't be sure if we are allowed or not. If the current channel is in the DFS band, active scan might be performed after CSA, but we have no guarantee about other channels, therefore it is safer to prevent active scanning at all. Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Peter Hurley authored
commit ee9159dd upstream. The N_X25 line discipline may access the previous line discipline's closed and already-freed private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Reported-and-tested-by:
-
