- 21 Jan, 2011 2 commits
-
-
Max Vozeler authored
This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0 [ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620 [ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50 [ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60 [ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130 [ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0 [ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648511] RSP <ffff8800a994dd30> [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by:
Max Vozeler <max@vozeler.com> Tested-by:
Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Max Vozeler authored
The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [<c014e760>] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [<c014e374>] ? kthread+0x74/0x80 [ 1348.563294] [<c014e300>] ? kthread+0x0/0x80 [ 1348.563326] [<c0103c47>] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by:
Steven Harms <sharms@luxotticaRetail.com> Signed-off-by:
-
- 20 Jan, 2011 15 commits
-
-
Omar Ramirez Luna authored
Lately, mailbox callbacks have been replaced by notifier block call chains, this needs to be changed in the users of mailbox, otherwise compilation will break due to missing parameters. For this new change to work, io_mbox_msg needs to be compatible with the notifier_call definition. Reported-by:
Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by:
Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by:
-
Ian Abbott authored
The ni_labpc driver module only requests a shared IRQ for PCI devices, requesting a non-shared IRQ for non-PCI devices. As this module is also used by the ni_labpc_cs module for certain National Instruments PCMCIA cards, it also needs to request a shared IRQ for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus controller. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@kernel.org> Signed-off-by:
-
roel kluin authored
Fix test: the branch is always taken. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Roland Stigge authored
Fix some ADC drivers' _scale interface to correct fixpoint formatted output Signed-off-by:
Roland Stigge <stigge@antcom.de> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Acked-by:
Michael Hennerich <Michael.Hennerich@analog.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Denis Kirjanov authored
The TX queues are allocated inside register_netdev. It doesn't make any sense to stop the queue before allocation. Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Larry Finger authored
The error path leaks the firmware struct. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Guzman Lugo, Fernando authored
IVA MMU can manage up to 4GB of address space through its page tables, given that it's L1 is divided into 1MB sections it requires at least 16KB for its table which represents 4096 entries of 32 bits each. Previously, only 1GB was being handled by setting the page table size to 4KB, any virtual address beyond of the L1 size used, would fall into memory that does not belong to L1 translation tables, leading to unpredictable results. So, set the L1 table size to cover the entire MMU range (4GB) whether is meant to be used or not. Reported-by:
Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by:
Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by:
-
Larry Finger authored
This device was tested with rt2870sta by setting new_id. Signed-off-by:
Brian Ormond <brian.ormond@oit.edu> Cc: Stable <stable@kernel.org> Signed-off-by:
-
Dan Carpenter authored
In the original code the parenthesis are in the wrong position, so the conditions are always true. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The original code called input_free_device(rmi4_data->input_dev) after input_unregister_device(rmi4_data->input_dev) and that's a double free. This is described in the comments to input_unregister_device(). The normal way to handle this is to make input_register_device() the last function in the probe which can fail. That way you can avoid the call to input_unregister_device() entirely. Signed-off-by:
-
Phillip Simbwa authored
Off by one Signed-off-by: Phillip Simbwa <simbwa at gmail dot com> Signed-off-by:
Vipin Mehta <vmehta@atheros.com> Signed-off-by:
-
Hank Janssen authored
Removed the call to netif_stop_queue() in netvsc_probe() as the queue is not initialized at that point and further call to it after queue initialization is really not necessary. This change was prompted after an upstream change went into 2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue is called before register with netdev is done. This will eliminate the warning message to the log when hv_netvsc driver starts up. Signed-off-by:
Abhishek Kane <v-abkane@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Timo Teräs authored
The channel callbacks are called directly from vmbus_event_dpc which runs in tasklet context. These callbacks need to use GFP_ATOMIC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701 Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Cc: stable <stable@kernel.org> Signed-off-by:
-
Ky Srinivasan authored
The block device does not create the proper symlink in sysfs because we forgot to set up the gendisk structure properly. This patch fixes the issue. Signed-off-by:
K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit a82ad05e (staging: vme: tsi148: fix warning in free_irq) accidentally added a Module.symvers file to the git tree. This patch removes it, sorry about that. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Cc: Emilio G. Cota <cota@braap.org> Signed-off-by:
-
- 18 Jan, 2011 23 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
-
Guenter Roeck authored
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Acked-by:
Jean Delvare <khali@linux-fr.org>
-
Oleg Nesterov authored
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Oleg Nesterov authored
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by:
-
Aurelien Jarno authored
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aurelien Jarno authored
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by:
-
David Daney authored
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/Signed-off-by:
-
Gabor Juhos authored
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/Signed-off-by:
-
Gabor Juhos authored
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by:
-
Gabor Juhos authored
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/Signed-off-by:
-
Gabor Juhos authored
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by:
-
Gabor Juhos authored
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by:
-
Gabor Juhos authored
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
Signed-off-by:
-
Gabor Juhos authored
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by:
-
Gabor Juhos authored
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by:
-
David Daney authored
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by:
-
