Pull PCI fixes from Bjorn Helgaas:

 - Defer VPD sizing until we actually need the contents; fixes a
   boot-time slowdown reported by Dave Jones (Bjorn Helgaas)

 - Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a
   virtio-iommu boot regression (Jean-Philippe Brucker)

 - Add AMD GPU multi-function power dependencies; fixes runtime power
   management, including GPU resume and temp and fan sensor issues (Evan
   Quan)

 - Update VMD maintainer to Nirmal Patel (Jon Derrick)

* tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add Nirmal Patel as VMD maintainer
  PCI: Add AMD GPU multi-function power dependencies
  PCI/ACPI: Don't reset a fwnode set by OF
  PCI/VPD: Defer VPD sizing until first access

Pull io_uring iov_iter retry fixes from Jens Axboe:
 "This adds a helper to save/restore iov_iter state, and modifies
  io_uring to use it.

  After that is done, we can now kill the iter->truncated addition that
  we added for this release. The io_uring change is being overly
  cautious with the save/restore/advance, but better safe than sorry and
  we can always improve that and reduce the overhead if it proves to be
  of concern. The only case to be worried about in this regard is huge
  IO, where iteration can take a while to iterate segments.

  I spent some time writing test cases, and expanded the coverage quite
  a bit from the last posting of this. liburing carries this regression
  test case now:

      https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c

  which exercises all of this. It now also supports provided buffers,
  and explicitly tests for end-of-file/device truncation as well.

  On top of that, Pavel sanitized the IOPOLL retry path to follow the
  exact same pattern as normal IO"

* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  io_uring: move iopoll reissue into regular IO path
  Revert "iov_iter: track truncated size"
  io_uring: use iov_iter state save/restore helpers
  iov_iter: add helper to save iov_iter state

Pull io_uring fixes from Jens Axboe:
 "Mostly fixes for regressions in this cycle, but also a few fixes that
  predate this release.

  The odd one out is a tweak to the direct files added in this release,
  where attempting to reuse a slot is allowed instead of needing an
  explicit removal of that slot first. It's a considerable improvement
  in usability to that API, hence I'm sending it for -rc2.

   - io-wq race fix and cleanup (Hao)

   - loop_rw_iter() type fix

   - SQPOLL max worker race fix

   - Allow poll arm for O_NONBLOCK files, fixing a case where it's
     impossible to properly use io_uring if you cannot modify the file
     flags

   - Allow direct open to simply reuse a slot, instead of needing it
     explicitly removed first (Pavel)

   - Fix a case where we missed signal mask restoring in cqring_wait, if
     we hit -EFAULT (Xiaoguang)"

* tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  io_uring: allow retry for O_NONBLOCK if async is supported
  io_uring: auto-removal for direct open/accept
  io_uring: fix missing sigmask restore in io_cqring_wait()
  io_uring: pin SQPOLL data before unlocking ring lock
  io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items
  io-wq: fix potential race of acct->nr_workers
  io-wq: code clean of io_wqe_create_worker()
  io_uring: ensure symmetry in handling iter types in loop_rw_iter()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
       - fix ANA state updates when a namespace is not present (Anton
         Eidelman)
       - nvmet: fix a width vs precision bug in
         nvmet_subsys_attr_serial_show (Dan Carpenter)
       - avoid race in shutdown namespace removal (Daniel Wagner)
       - fix io_work priority inversion in nvme-tcp (Keith Busch)
       - destroy cm id before destroy qp to avoid use after free (Ruozhu
         Li)

 - blk-integrity profile registration fixes (Christoph, Lihong)

 - blk-cgroup UAF fix (Li)

 - blk-mq tag iterator fix (Ming)

 - blkcg memory leak fix (Yanfei)

* tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd
  blkcg: fix memory leak in blk_iolatency_init
  nvme: remove the call to nvme_update_disk_info in nvme_ns_remove
  block: flush the integrity workqueue in blk_integrity_unregister
  block: check if a profile is actually registered in blk_integrity_unregister
  nvme-tcp: fix io_work priority inversion
  nvme-rdma: destroy cm id before destroy qp to avoid use after free
  nvme-multipath: fix ANA state updates when a namespace is not present
  nvme: avoid race in shutdown namespace removal
  nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
  blk-mq: avoid to iterate over stale request

Pull arm64 fixes and cleanups from Catalin Marinas:

 - Fix the memset() size when re-initialising the SVE state.

 - Mark __stack_chk_guard as __ro_after_init.

 - Remove duplicate include.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Mark __stack_chk_guard as __ro_after_init
  arm64/kernel: remove duplicate include in process.c
  arm64/sve: Use correct size when reinitialising SVE state

Pull xen fixes from Juergen Gross:

 - The first hunk of a Xen swiotlb fixup series fixing multiple minor
   issues and doing some small cleanups

 - Some further Xen related fixes avoiding WARN() splats when running as
   Xen guests or dom0

 - A Kconfig fix allowing the pvcalls frontend to be built as a module

* tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  swiotlb-xen: drop DEFAULT_NSLABS
  swiotlb-xen: arrange to have buffer info logged
  swiotlb-xen: drop leftover __ref
  swiotlb-xen: limit init retries
  swiotlb-xen: suppress certain init retries
  swiotlb-xen: maintain slab count properly
  swiotlb-xen: fix late init retry
  swiotlb-xen: avoid double free
  xen/pvcalls: backend can be a module
  xen: fix usage of pmd_populate in mremap for pv guests
  xen: reset legacy rtc flag for PV domU
  PM: base: power: don't try to use non-existing RTC for storing data
  xen/balloon: use a kernel thread instead a workqueue

Pull drm fixes from Dave Airlie:
 "Slightly busier than usual rc2, but mostly scattered amdgpu fixes,
  some i915 and etnaviv resolves an MMU/runtime PM blowup.

  amdgpu:
   - UBSAN fix
   - Powerplay table update fix
   - Fix use after free in BO moves
   - Debugfs init fixes
   - vblank workqueue fixes for headless devices
   - FPU fixes
   - sysfs_emit fixes
   - SMU updates for cyan skillfish
   - Backlight fixes when DMCU is not initialized
   - DP MST fixes
   - HDCP compliance fix
   - Link training fix
   - Runtime pm fix
   - Panel orientation fixes
   - Display GPUVM fix for yellow carp
   - Add missing license

  amdkfd:
   - Drop PCI atomics requirement if proper firmware is available
   - Suspend/resume fixes for IOMMUv2 cases

  radeon:
   - AGP fix

  i915:
   - Propagate DP link training error returns
   - Use max link params for eDP 1.3 and earlier
   - Build warning fixes
   - Gem selftest fixes
   - Ensure wakeref is held before hardware access

  etnaviv:
   - MMU context vs runtime PM fix"

* tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits)
  drm/amdgpu/display: add a proper license to dc_link_dp.c
  drm/amd/display: Fix white screen page fault for gpuvm
  amd/display: enable panel orientation quirks
  drm/amdgpu: Demote TMZ unsupported log message from warning to info
  drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count
  drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver
  drm/radeon: pass drm dev radeon_agp_head_init directly
  drm/amdgpu: move iommu_resume before ip init/resume
  drm/amdgpu: add amdgpu_amdkfd_resume_iommu
  drm/amdkfd: separate kfd_iommu_resume from kfd_resume
  drm/amd/display: Link training retry fix for abort case
  drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo
  drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3
  drm/amd/display: Get backlight from PWM if DMCU is not initialized
  drm/amdkfd: make needs_pcie_atomics FW-version dependent
  drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)
  drm/amdgpu: add some pptable funcs for cyan skilfish(v3)
  drm/amdgpu: update SMU driver interface for cyan skilfish(v3)
  drm/amdgpu: update SMU PPSMC for cyan skilfish
  drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  Current release - regressions:

   - vhost_net: fix OoB on sendmsg() failure

   - mlx5: bridge, fix uninitialized variable usage

   - bnxt_en: fix error recovery regression

  Current release - new code bugs:

   - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()

  Previous releases - regressions:

   - r6040: restore MDIO clock frequency after MAC reset

   - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()

   - dsa: flush switchdev workqueue before tearing down CPU/DSA ports

  Previous releases - always broken:

   - ptp: dp83640: don't define PAGE0, avoid compiler warning

   - igc: fix tunnel segmentation offloads

   - phylink: update SFP selected interface on advertising changes

   - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume

   - mlx5e: fix mutual exclusion between CQE compression and HW TS

  Misc:

   - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode

   - sfc: fallback for lack of xdp tx queues

   - hns3: add option to turn off page pool feature"

* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  mlxbf_gige: clear valid_polarity upon open
  igc: fix tunnel offloading
  net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
  net: wan: wanxl: define CROSS_COMPILE_M68K
  selftests: nci: replace unsigned int with int
  net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
  Revert "net: phy: Uniform PHY driver access"
  net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
  ptp: dp83640: don't define PAGE0
  bnx2x: Fix enabling network interfaces without VFs
  Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
  tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
  net-caif: avoid user-triggerable WARN_ON(1)
  bpf, selftests: Add test case for mixed cgroup v1/v2
  bpf, selftests: Add cgroup v1 net_cls classid helpers
  bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
  bpf: Add oversize check before call kvcalloc()
  net: hns3: fix the timing issue of VF clearing interrupt sources
  net: hns3: fix the exception when query imp info
  net: hns3: disable mac in flr process
  ...

Merge tag 'amd-drm-fixes-5.15-2021-09-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-09-16:

amdgpu:
- UBSAN fix
- Powerplay table update fix
- Fix use after free in BO moves
- Debugfs init fixes
- vblank workqueue fixes for headless devices
- FPU fixes
- sysfs_emit fixes
- SMU updates for cyan skillfish
- Backlight fixes when DMCU is not initialized
- DP MST fixes
- HDCP compliance fix
- Link training fix
- Runtime pm fix
- Panel orientation fixes
- Display GPUVM fix for yellow carp
- Add missing license

amdkfd:
- Drop PCI atomics requirement if proper firmware is available
- Suspend/resume fixes for IOMMUv2 cases

radeon:
- AGP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc2:
- Propagate DP link training error returns
- Use max link params for eDP 1.3 and earlier
- Build warning fixes
- Gem selftest fixes
- Ensure wakeref is held before hardware access
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes a very annoying issue where the driver view of the MMU state gets
out of sync with the actual hardware state across a runtime PM cycle,
so we end up restarting the GPU with the wrong (potentially already
freed) MMU context. Hilarity ensues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/729a561b6cfed090457bcc856a9e14ed6209fe21.camel@pengutronix.de

With the new static annotation, the compiler warns when the functions
are actually unused:

   drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
    1123 | static int cdn_dp_resume(struct device *dev)
         |            ^~~~~~~~~~~~~

Mark them __maybe_unused to suppress that warning as well.

[ Not so 'new' static annotations any more, and I removed the part of
  the patch that added __maybe_unused to cdn_dp_suspend(), because it's
  used by the shutdown/remove code.

  So only the resume function ends up possibly unused if CONFIG_PM isn't
  set     - Linus ]

Fixes: 7c49abb4 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm:allmodconfig fails to build with the following error.

  drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
					unused variable 'cur_cluster'

Remove the unused variable.

Fixes: bb8c26d9 ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it.  And I think the 'Jensen' actually
did have an ISA slot.

However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':

        outl((int) (skb->data), ioaddr + Wn7_MasterAddr);

which is all kinds of broken.  Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits.  I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".

Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).

Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull parisc fix from Helge Deller:
 "Fix a build warning when using the PAGE0 pointer"

* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use absolute_pointer() to define PAGE0

Pull m68k fixes from Geert Uytterhoeven:

 - Warning fixes to mitigate CONFIG_WERROR=y

* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: mvme: Remove overdue #warnings in RTC handling
  m68k: Double cast io functions to unsigned long

__stack_chk_guard is setup once while init stage and never changed
after that.

Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Remove all but the first include of linux/sched.h from process.c
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cnSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.

This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.

Fixes: bc0ee476 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Was missing.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The "base_addr_is_mc_addr" field was added for dcn3.1 support but
pa_config was never updated to set it to false.

Uninitialized memory causes it to be set to true which results in
address mistranslation and white screen.

[How]
Use memset to ensure all fields are initialized to 0 by default.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch allows panel orientation quirks from DRM core to be
used. They attach a DRM connector property "panel orientation"
which indicates in which direction the panel has been mounted.
Some machines have the internal screen mounted with a rotation.

Since the panel orientation quirks need the native mode from the
EDID, check for it in amdgpu_dm_connector_ddc_get_modes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As the user cannot do anything about the unsupported Trusted Memory Zone
(TMZ) feature, do not warn about it, but make it informational, so
demote the log level from warning to info.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.

Fixes compile failure building for ppc64le on RHEL 8:

In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
                 from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
 to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
   90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
 1985 |         max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: c84d4670 "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Current RUNPM mechanism relies on PMFW to master the timing for BACO
in/exit. And that needs cooperation from sound driver for dstate
change notification for function 1(audio). Otherwise(on sound driver
missing), BACO cannot be kicked in correctly and hang will be observed
on RUNPM exit.

By switching back to legacy message way on sound driver missing,
we are able to fix the runpm hang observed for the scenario below:
amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pass drm dev directly as rdev->ddev gets initialized later on
at radeon_device_init().

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add amdgpu_amdkfd_resume_iommu for amdgpu.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
If link training is aborted, it shall be retried if sink is present.

[How]
Check hpd status to find out whether sink is present or not. If sink is
present, then link training shall be tried again with same settings.
Otherwise, link training shall be aborted.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Intermittently, there presents two occurrences of 0 stream
commits in a single HPD event. Current HDCP sequence does
not consider such scenerio, and will thus disable HDCP.

[How]
Add condition check to include stream remove and re-enable
case for HDCP enable.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
call stack of amdgpu dsc mst pbn, slot num calculation is as below:
-compute_bpp_x16_from_target_bandwidth
-decide_dsc_target_bpp_x16
-setup_dsc_config
-dc_dsc_compute_bandwidth_range
-compute_mst_dsc_configs_for_link
-compute_mst_dsc_configs_for_state

from pbn -> dsc target bpp_x16

bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth.
Beside pixel clock and bpp, num_slices_h and bpp_increment_div
will also affect bpp_x16.

from dsc target bpp_x16 -> pbn

within dm_update_mst_vcpi_slots_for_dsc,
pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true);

drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
  return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
            8 * 54 * 1000 * 1000);
}

bpp / 16 trunc digits after decimal point. This will cause calculation
delta. drm_dp_calc_pbn_mode does not have other informations,
like num_slices_h, bpp_increment_div. therefore, it does not do revese
calcuation properly from bpp_x16 to pbn.

pbn from drm_dp_calc_pbn_mode is less than pbn from
compute_mst_dsc_configs_for_state. This cause not enough mst slot
allocated to display. display could not visually light up.

[How]
pass pbn from compute_mst_dsc_configs_for_state to
dm_update_mst_vcpi_slots_for_dsc

Cc: stable@vger.kernel.org
Reviewed-by: Scott Foster <Scott.Foster@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Hersen Wu <hersenwu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On Carrizo/Stoney systems we set backlight through panel_cntl, i.e.
directly via the PWM registers, if DMCU is not initialized. We
always read it back through ABM registers which leads to a
mismatch and forces atomic_commit to program the backlight
each time.

Instead make sure we use the same logic for backlight readback,
i.e. read it from panel_cntl if DMCU is not initialized.

We also need to remove some extraneous and incorrect calculations
at the end of dce_get_16_bit_backlight_from_pwm.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.

Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs
to maintain consistency with other asics. As cyan skillfish doesn't
support DPM, there is only a single frequency and voltage to adjust.

v2: maintain consistency and add command guide.
v3: adjust user settings storage and coding style.

Command guide:
echo vc point sclk vddc > pp_od_clk_voltage
	"vc"    - sclk voltage curve
	"point" - must be 0
	"sclk"  - target value of sclk(MHz), should be in safe range
	"vddc"  - target value of vddc(mV), a 6.25(mV) stepping is
		  recommended and should be in safe range (the real
		  vddc is an approximation of target value)
echo c > pp_od_clk_voltage
	"c"	- commit the changes of sclk and vddc, only after
		  the commit command, the target values set by "vc"
		  command will take effect
echo r > pp_od_clk_voltage
	"r" 	- reset sclk and vddc to default value, a subsequent
		  commit command is needed to take effect

Example:
1) Check default sclk and vddc
	$ cat pp_od_clk_voltage
	OD_SCLK:
	0: 1800Mhz *
	OD_VDDC:
	0: 862mV *
	OD_RANGE:
	SCLK:    1000Mhz       2000Mhz
	VDDC:     700mV        1129mV
2) Set sclk to 1500MHz and vddc to 700mV
	$ echo vc 0 1500 700 > pp_od_clk_voltage
	$ echo c > pp_od_clk_voltage
	$ cat pp_od_clk_voltage
	OD_SCLK:
	0: 1500Mhz *
	OD_VDDC:
	0: 693mV *
	OD_RANGE:
	SCLK:    1000Mhz       2000Mhz
	VDDC:     700mV        1129mV
3) Reset sclk and vddc to default
	$ echo r > pp_od_clk_voltage
	$ echo c > pp_od_clk_voltage
	$ cat pp_od_clk_voltage
	OD_SCLK:
	0: 1800Mhz *
	OD_VDDC:
	0: 874mV *
	OD_RANGE:
	SCLK:    1000Mhz       2000Mhz
	VDDC:     700mV        1129mV
NOTE:
We don't specify an explicit safe range, you can set any values
between min and max at your own risk. Enjoy!
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add print_clk_levels and read_sensor pptable funcs for
cyan skilfish.

v2: keep consitency and add get_gpu_metrics callback.
v3: use sysfs_emit_at() in sysfs show function.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add SmuMetrics_t definition for cyan skilfish.

v2: update SmuMetrics_t definition.
v3: cleanup and rearrange the order of fields.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add some PPSMC MSGs for cyan skilfish.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>