- 15 Jan, 2021 2 commits
-
-
Brian King authored
While testing live partition mobility, we have observed occasional crashes of the Linux partition. What we've seen is that during the live migration, for specific configurations with large amounts of memory, slow network links, and workloads that are changing memory a lot, the partition can end up being suspended for 30 seconds or longer. This resulted in the following scenario: CPU 0 CPU 1 ------------------------------- ---------------------------------- scsi_queue_rq migration_store -> blk_mq_start_request -> rtas_ibm_suspend_me -> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me _______________________________________V | V -> IPI from CPU 1 -> rtas_percpu_suspend_me -> __rtas_suspend_last_cpu -- Linux partition suspended for > 30 seconds -- -> for_each_online_cpu(cpu) plpar_hcall_norets(H_PROD -> scsi_dispatch_cmd -> scsi_times_out -> scsi_abort_command -> queue_delayed_work -> ibmvfc_queuecommand_lck -> ibmvfc_send_event -> ibmvfc_send_crq - returns H_CLOSED <- returns SCSI_MLQUEUE_HOST_BUSY -> __blk_mq_requeue_request -> scmd_eh_abort_handler -> scsi_try_to_abort_cmd - returns SUCCESS -> scsi_queue_insert Normally, the SCMD_STATE_COMPLETE bit would protect against the command completion and the timeout, but that doesn't work here, since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY path. In this case we end up calling scsi_queue_insert on a request that has already been queued, or possibly even freed, and we crash. The patch below simply increases the default I/O timeout to avoid this race condition. This is also the timeout value that nearly all IBM SAN storage recommends setting as the default value. Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.comSigned-off-by:Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Shin'ichiro Kawasaki authored
Commit a3512902 ("scsi: target: tcmu: Use priv pointer in se_cmd") modified tcmu_free_cmd() to set NULL to priv pointer in se_cmd. However, se_cmd can be already freed by work queue triggered in target_complete_cmd(). This caused BUG KASAN use-after-free [1]. To fix the bug, do not touch priv pointer in tcmu_free_cmd(). Instead, set NULL to priv pointer before target_complete_cmd() calls. Also, to avoid unnecessary priv pointer change in tcmu_queue_cmd(), modify priv pointer in the function only when tcmu_free_cmd() is not called. [1] BUG: KASAN: use-after-free in tcmu_handle_completions+0x1172/0x1770 [target_core_user] Write of size 8 at addr ffff88814cf79a40 by task cmdproc-uio0/14842 CPU: 2 PID: 14842 Comm: cmdproc-uio0 Not tainted 5.11.0-rc2 #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 3.2 11/22/2019 Call Trace: dump_stack+0x9a/0xcc ? tcmu_handle_completions+0x1172/0x1770 [target_core_user] print_address_description.constprop.0+0x18/0x130 ? tcmu_handle_completions+0x1172/0x1770 [target_core_user] ? tcmu_handle_completions+0x1172/0x1770 [target_core_user] kasan_report.cold+0x7f/0x10e ? tcmu_handle_completions+0x1172/0x1770 [target_core_user] tcmu_handle_completions+0x1172/0x1770 [target_core_user] ? queue_tmr_ring+0x5d0/0x5d0 [target_core_user] tcmu_irqcontrol+0x28/0x60 [target_core_user] uio_write+0x155/0x230 ? uio_vma_fault+0x460/0x460 ? security_file_permission+0x4f/0x440 vfs_write+0x1ce/0x860 ksys_write+0xe9/0x1b0 ? __ia32_sys_read+0xb0/0xb0 ? syscall_enter_from_user_mode+0x27/0x70 ? trace_hardirqs_on+0x1c/0x110 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fcf8b61905f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 b9 fc ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 0c fd ff ff 48 RSP: 002b:00007fcf7b3e6c30 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcf8b61905f RDX: 0000000000000004 RSI: 00007fcf7b3e6c78 RDI: 000000000000000c RBP: 00007fcf7b3e6c80 R08: 0000000000000000 R09: 00007fcf7b3e6aa8 R10: 000000000b01c000 R11: 0000000000000293 R12: 00007ffe0c32a52e R13: 00007ffe0c32a52f R14: 0000000000000000 R15: 00007fcf7b3e7640 Allocated by task 383: kasan_save_stack+0x1b/0x40 ____kasan_kmalloc.constprop.0+0x84/0xa0 kmem_cache_alloc+0x142/0x330 tcm_loop_queuecommand+0x2a/0x4e0 [tcm_loop] scsi_queue_rq+0x12ec/0x2d20 blk_mq_dispatch_rq_list+0x30a/0x1db0 __blk_mq_do_dispatch_sched+0x326/0x830 __blk_mq_sched_dispatch_requests+0x2c8/0x3f0 blk_mq_sched_dispatch_requests+0xca/0x120 __blk_mq_run_hw_queue+0x93/0xe0 process_one_work+0x7b6/0x1290 worker_thread+0x590/0xf80 kthread+0x362/0x430 ret_from_fork+0x22/0x30 Freed by task 11655: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0xec/0x120 slab_free_freelist_hook+0x53/0x160 kmem_cache_free+0xf4/0x5c0 target_release_cmd_kref+0x3ea/0x9e0 [target_core_mod] transport_generic_free_cmd+0x28b/0x2f0 [target_core_mod] target_complete_ok_work+0x250/0xac0 [target_core_mod] process_one_work+0x7b6/0x1290 worker_thread+0x590/0xf80 kthread+0x362/0x430 ret_from_fork+0x22/0x30 Last potentially related work creation: kasan_save_stack+0x1b/0x40 kasan_record_aux_stack+0xa3/0xb0 insert_work+0x48/0x2e0 __queue_work+0x4e8/0xdf0 queue_work_on+0x78/0x80 tcmu_handle_completions+0xad0/0x1770 [target_core_user] tcmu_irqcontrol+0x28/0x60 [target_core_user] uio_write+0x155/0x230 vfs_write+0x1ce/0x860 ksys_write+0xe9/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Second to last potentially related work creation: kasan_save_stack+0x1b/0x40 kasan_record_aux_stack+0xa3/0xb0 insert_work+0x48/0x2e0 __queue_work+0x4e8/0xdf0 queue_work_on+0x78/0x80 tcm_loop_queuecommand+0x1c3/0x4e0 [tcm_loop] scsi_queue_rq+0x12ec/0x2d20 blk_mq_dispatch_rq_list+0x30a/0x1db0 __blk_mq_do_dispatch_sched+0x326/0x830 __blk_mq_sched_dispatch_requests+0x2c8/0x3f0 blk_mq_sched_dispatch_requests+0xca/0x120 __blk_mq_run_hw_queue+0x93/0xe0 process_one_work+0x7b6/0x1290 worker_thread+0x590/0xf80 kthread+0x362/0x430 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff88814cf79800 which belongs to the cache tcm_loop_cmd_cache of size 896. Link: https://lore.kernel.org/r/20210113024508.1264992-1-shinichiro.kawasaki@wdc.com Fixes: a3512902 ("scsi: target: tcmu: Use priv pointer in se_cmd") Cc: stable@vger.kernel.org # v5.9+ Acked-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by:
-
- 13 Jan, 2021 4 commits
-
-
Dinghao Liu authored
When ioread32() returns 0xFFFFFFFF, we should execute cleanup functions like other error handling paths before returning. Link: https://lore.kernel.org/r/20201225083520.22015-1-dinghao.liu@zju.edu.cnAcked-by:
Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Javed Hasan authored
A race condition exists between the response handler getting called because of exchange_mgr_reset() (which clears out all the active XIDs) and the response we get via an interrupt. Sequence of events: rport ba0200: Port timeout, state PLOGI rport ba0200: Port entered PLOGI state from PLOGI state xid 1052: Exchange timer armed : 20000 msecs xid timer armed here rport ba0200: Received LOGO request while in state PLOGI rport ba0200: Delete port rport ba0200: work event 3 rport ba0200: lld callback ev 3 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200 bnx2fc: ba0200 - rport not created Yet!! /* Here we reset any outstanding exchanges before freeing rport using the exch_mgr_reset() */ xid 1052: Exchange timer canceled /* Here we got two responses for one xid */ xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 Skip the response if the exchange is already completed. Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.comSigned-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Martin Wilck authored
If the port is in SRP_RPORT_FAIL_FAST state when srp_reconnect_rport() is entered, a transition to SDEV_BLOCK would be illegal, and a kernel WARNING would be triggered. Skip scsi_target_block() in this case. Link: https://lore.kernel.org/r/20210111142541.21534-1-mwilck@suse.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Lukas Bulwahn authored
Commit 0b2894cd ("scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode") adds new entries in tables of sysfs-driver-ufs ABI documentation, but formatted the table incorrectly. Hence, make htmldocs warns: ./Documentation/ABI/testing/sysfs-driver-ufs:{915,956}: WARNING: Malformed table. Text in column margin in table line 15. Rectify table formatting for DeepSleep power mode. Link: https://lore.kernel.org/r/20210111102212.19377-1-lukas.bulwahn@gmail.comAcked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
- 08 Jan, 2021 6 commits
-
-
Jaegeuk Kim authored
When non-fatal error like line-reset happens, ufshcd_err_handler() starts to abort tasks by ufshcd_try_to_abort_task(). When it tries to issue a task management request, we hit two warnings: WARNING: CPU: 7 PID: 7 at block/blk-core.c:630 blk_get_request+0x68/0x70 WARNING: CPU: 4 PID: 157 at block/blk-mq-tag.c:82 blk_mq_get_tag+0x438/0x46c After fixing the above warnings we hit another tm_cmd timeout which may be caused by unstable controller state: __ufshcd_issue_tm_cmd: task management cmd 0x80 timed-out Then, ufshcd_err_handler() enters full reset, and kernel gets stuck. It turned out ufshcd_print_trs() printed too many messages on console which requires CPU locks. Likewise hba->silence_err_logs, we need to avoid too verbose messages. This is actually not an error case. Link: https://lore.kernel.org/r/20210107185316.788815-3-jaegeuk@kernel.org Fixes: 69a6c269 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
When gate_work/ungate_work experience an error during hibern8_enter or exit we can livelock: ufshcd_err_handler() ufshcd_scsi_block_requests() ufshcd_reset_and_restore() ufshcd_clear_ua_wluns() -> stuck ufshcd_scsi_unblock_requests() In order to avoid this, ufshcd_clear_ua_wluns() can be called per recovery flows such as suspend/resume, link_recovery, and error_handler. Link: https://lore.kernel.org/r/20210107185316.788815-2-jaegeuk@kernel.org Fixes: 1918651f ("scsi: ufs: Clear UAC for RPMB after ufshcd resets") Reviewed-by: -
Tyrel Datwyler authored
Commit 2aa0102c ("scsi: ibmvfc: Use correlation token to tag commands") sets the vfcFrame correlation token to the pointer handle of the associated ibmvfc_event. However, that commit failed to cast the pointer to an appropriate type which in this case is a u64. As such sparse warnings are generated for both correlation token assignments. ibmvfc.c:2375:36: sparse: incorrect type in argument 1 (different base types) ibmvfc.c:2375:36: sparse: expected unsigned long long [usertype] val ibmvfc.c:2375:36: sparse: got struct ibmvfc_event *[assigned] evt Add the appropriate u64 casts when assigning an ibmvfc_event as a correlation token. Link: https://lore.kernel.org/r/20210106203721.1054693-1-tyreld@linux.ibm.com Fixes: 2aa0102c ("scsi: ibmvfc: Use correlation token to tag commands") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Building ufshcd-pltfrm.c on arch/s390/ has a linker error since S390 does not support IOMEM, so add a dependency on HAS_IOMEM. s390-linux-ld: drivers/scsi/ufs/ufshcd-pltfrm.o: in function `ufshcd_pltfrm_init': ufshcd-pltfrm.c:(.text+0x38e): undefined reference to `devm_platform_ioremap_resource' where that devm_ function is inside an #ifdef CONFIG_HAS_IOMEM/#endif block. Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com Link: https://lore.kernel.org/r/20210106040822.933-1-rdunlap@infradead.org Fixes: 03b1781a ("[SCSI] ufs: Add Platform glue driver for ufshcd") Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: linux-scsi@vger.kernel.org Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Arnd Bergmann authored
Phil Oester reported that a fix for a possible buffer overrun that I sent caused a regression that manifests in this output: Event Message: A PCI parity error was detected on a component at bus 0 device 5 function 0. Severity: Critical Message ID: PCI1308 The original code tried to handle the sense data pointer differently when using 32-bit 64-bit DMA addressing, which would lead to a 32-bit dma_addr_t value of 0x11223344 to get stored 32-bit kernel: 44 33 22 11 ?? ?? ?? ?? 64-bit LE kernel: 44 33 22 11 00 00 00 00 64-bit BE kernel: 00 00 00 00 44 33 22 11 or a 64-bit dma_addr_t value of 0x1122334455667788 to get stored as 32-bit kernel: 88 77 66 55 ?? ?? ?? ?? 64-bit kernel: 88 77 66 55 44 33 22 11 In my patch, I tried to ensure that the same value is used on both 32-bit and 64-bit kernels, and picked what seemed to be the most sensible combination, storing 32-bit addresses in the first four bytes (as 32-bit kernels already did), and 64-bit addresses in eight consecutive bytes (as 64-bit kernels already did), but evidently this was incorrect. Always storing the dma_addr_t pointer as 64-bit little-endian, i.e. initializing the second four bytes to zero in case of 32-bit addressing, apparently solved the problem for Phil, and is consistent with what all 64-bit little-endian machines did before. I also checked in the history that in previous versions of the code, the pointer was always in the first four bytes without padding, and that previous attempts to fix 64-bit user space, big-endian architectures and 64-bit DMA were clearly flawed and seem to have introduced made this worse. Link: https://lore.kernel.org/r/20210104234137.438275-1-arnd@kernel.org Fixes: 381d34e3 ("scsi: megaraid_sas: Check user-provided offsets") Fixes: 107a60dd ("scsi: megaraid_sas: Add support for 64bit consistent DMA") Fixes: 94cd65dd ("[SCSI] megaraid_sas: addded support for big endian architecture") Fixes: 7b2519af ("[SCSI] megaraid_sas: fix 64 bit sense pointer truncation") Reported-by:
Phil Oester <kernel@linuxace.com> Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Adrian Hunter authored
Update sysfs documentation for addition of DeepSleep power mode. Link: https://lore.kernel.org/r/20210104155026.16417-1-adrian.hunter@intel.com Fixes: fe1d4c2e ("scsi: ufs: Add DeepSleep feature") Signed-off-by:
-
- 06 Jan, 2021 9 commits
-
-
Lukas Bulwahn authored
Commit 996e509b ("sd: use __register_blkdev to avoid a modprobe for an unregistered dev_t") removed blk_register_region(devt, ...) in sd_remove() and since then, devt is unused in sd_remove(). Hence, make W=1 warns: drivers/scsi/sd.c:3516:8: warning: variable 'devt' set but not used [-Wunused-but-set-variable] Simply remove this obsolete variable. [mkp: fixed commit sha] Link: https://lore.kernel.org/r/20201214095424.12479-1-lukas.bulwahn@gmail.comReviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
-
Ewan D. Milne authored
The block layer code will split a large zeroout request into multiple bios and if WRITE SAME is disabled because the storage device reports that it does not support it (or support the length used), we can get an error message from the block layer despite the setting of RQF_QUIET on the first request. This is because more than one request may have already been submitted. Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the request early, we don't need to log a message because we did not actually submit the command to the device, and the block layer code will handle the error by submitting individual write bios. Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Dinghao Liu authored
When sdeb_zbc_model does not match BLK_ZONED_NONE, BLK_ZONED_HA or BLK_ZONED_HM, we should free sdebug_q_arr to prevent memleak. Also there is no need to execute sdebug_erase_store() on failure of sdeb_zbc_model_str(). Link: https://lore.kernel.org/r/20201226061503.20050-1-dinghao.liu@zju.edu.cnAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it. Link: https://lore.kernel.org/r/20201217172019.57768-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nilesh Javali authored
The CHAP secret displayed garbage characters causing iSCSI login authentication failure. Correct the CHAP password max length. Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Can Guo authored
Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.orgReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Kiwoong Kim authored
The current flush location does not guarantee disabling BKOPS for the case of requesting device power off. 1) The exceptional event handler is queued 2) ufs suspend starts with a request of device power off 3) BKOPS is disabled in ufs suspend 4) The queued work for the handler is done and BKOPS is re-enabled Relocate the flush statement to ensure BKOPS remain disabled. Link: https://lore.kernel.org/r/1608360039-16390-1-git-send-email-kwmad.kim@samsung.comReviewed-by:
Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by:
-
Stanley Chu authored
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL is intended to skip enabling fWriteBoosterBufferFlushEn while WriteBooster is initializing. Therefore it is better to apply the checking during WriteBooster initialization only. Link: https://lore.kernel.org/r/20201222072905.32221-3-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
Currently if device needs to do flush or BKOP operations, the device VCC power is kept during runtime-suspend period. However, if system suspend is happening while device is runtime-suspended, such power may not be disabled successfully. The reasons may be, 1. If current PM level is the same as SPM level, device will keep runtime-suspended by ufshcd_system_suspend(). 2. Flush recheck work may not be scheduled successfully during system suspend period. If it can wake up the system, this is also not the intention of the recheck work. To fix this issue, simply runtime-resume the device if the flush is allowed during runtime suspend period. Flush capability will be disabled while leaving runtime suspend, and also not be allowed in system suspend period. Link: https://lore.kernel.org/r/20201222072905.32221-2-stanley.chu@mediatek.com Fixes: 51dd905b ("scsi: ufs: Fix WriteBooster flush during runtime suspend") Reviewed-by:
Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by:
-
- 04 Jan, 2021 1 commit
-
-
Martin K. Petersen authored
Merge two commits that had dependencies on other 5.11 trees (the block and the irq trees respectively). - We reverted a megaraid_sas change in 5.10 due to missing block layer plumbing. Now that this is in place, reinstate the change. - The hisi_sas driver had a dependency on a driver core irq change that went in through Thomas' tree. Signed-off-by:
-
- 03 Jan, 2021 1 commit
-
-
Linus Torvalds authored
-
- 02 Jan, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK -
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
-
- 01 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Two minor block fixes from this last week that should go into 5.11: - Add missing NOWAIT debugfs definition (Andres) - Fix kerneldoc warning introduced this merge window (Randy)" * tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block: block: add debugfs stanza for QUEUE_FLAG_NOWAIT fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few fixes that should go into 5.11, all marked for stable as well: - Fix issue around identity COW'ing and users that share a ring across processes - Fix a hang associated with unregistering fixed files (Pavel) - Move the 'process is exiting' cancelation a bit earlier, so task_works aren't affected by it (Pavel)" * tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block: kernel/io_uring: cancel io_uring before task works io_uring: fix io_sqe_files_unregister() hangs io_uring: add a helper for setting a ref node io_uring: don't assume mm is constant across submits -
Linus Torvalds authored
Commit 436e980e ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Dec, 2020 3 commits
-
-
Pavel Begunkov authored
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by:
-
Pavel Begunkov authored
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by:
-
- 30 Dec, 2020 6 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A fix for an edge case in MClientRequest encoding and a couple of trivial fixups for the new msgr2 support" * tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client: libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE libceph: align session_key and con_secret to 16 bytes libceph: fix auth_signature buffer allocation in secure mode ceph: reencode gid_list when reconnecting
-
Artem Bityutskiy authored
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by:Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Rafael J. Wysocki authored
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by:
Kenneth R. Crudup <kenny@panix.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pmRafael J. Wysocki authored
Pull operating performance points (OPP) framework fixes for 5.11-rc2 from Viresh Kumar: "This contains two patches to fix freeing of resources in error paths." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table
-
Heiko Carstens authored
...and add comments at the top and bottom. Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
Signed-off-by:
-
- 29 Dec, 2020 1 commit
-
-
Andres Freund authored
This was missed in 021a2446. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a2446 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
-
