- 08 Jun, 2020 29 commits
-
-
Christoph Hellwig authored
There is a magic ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE cpp symbol that guards non-stub availability of flush_dcache_pagge. Use that to check if flush_dcache_pagg is implemented. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/20200515143646.3857579-8-hch@lst.deSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
This seems to lead to some crazy include loops when using asm-generic/cacheflush.h on more architectures, so leave it to the arch header for now. [hch@lst.de: fix warning] Link: http://lkml.kernel.org/r/20200520173520.GA11199@lst.deSigned-off-by:
-
Christoph Hellwig authored
cacheflush.h uses a somewhat to generic include guard name that clashes with various arch files. Use a more specific one. Signed-off-by:
-
Christoph Hellwig authored
flush_cache_user_range is an ARMism not used by any generic or unicore32 specific code. Signed-off-by:
-
Christoph Hellwig authored
flush_icache_user_range is only used by copy_to_user_page, which is only used by core VM code. Signed-off-by:
-
Christoph Hellwig authored
flush_icache_page is only used by mm/memory.c. Signed-off-by:
-
Christoph Hellwig authored
Patch series "sort out the flush_icache_range mess", v2. flush_icache_range is mostly used for kernel address, except for the following cases: - the nommu brk and mmap implementations - the read_code helper that is only used for binfmt_flat, binfmt_elf_fdpic, and binfmt_aout including the broken ia32 compat version - binfmt_flat itself none of which really are used by a typical MMU enabled kernel, as a.out can only be build for alpha and m68k to start with. But strangely enough commit ae92ef8a ("PATCH] flush icache in correct context") added a "set_fs(KERNEL_DS)" around the flush_icache_range call in the module loader, because apparently m68k assumed user pointers. This series first cleans up the cacheflush implementations, largely by switching as much as possible to the asm-generic version after a few preparations, then moves the misnamed current flush_icache_user_range to a new name, to finally introduce a real flush_icache_user_range to be used for the above use cases to flush the instruction cache for a userspace address range. The last patch then drops the set_fs in the module code and moves it into the m68k implementation. This patch (of 29): The arguments passed look bogus, try to fix them to something that seems to make sense. Signed-off-by:
-
John Hubbard authored
This code was using get_user_pages*(), in approximately a "Case 5" scenario (accessing the data within a page), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/Signed-off-by:John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200529234309.484480-3-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
Patch series "vhost, docs: convert to pin_user_pages(), new "case 5"" It recently became clear to me that there are some get_user_pages*() callers that don't fit neatly into any of the four cases that are so far listed in pin_user_pages.rst. vhost.c is one of those. Add a Case 5 to the documentation, and refer to that when converting vhost.c. Thanks to Jan Kara for helping me (again) in understanding the interaction between get_user_pages() and page writeback [1]. This is based on today's mmotm, which has a nearby patch to pin_user_pages.rst that rewords cases 3 and 4. Note that I have only compile-tested the vhost.c patch, although that does also include cross-compiling for a few other arches. Any run-time testing would be greatly appreciated. [1] https://lore.kernel.org/r/20200529070343.GL14550@quack2.suse.cz This patch (of 2): There are four cases listed in pin_user_pages.rst. These are intended to help developers figure out whether to use get_user_pages*(), or pin_user_pages*(). However, the four cases do not cover all the situations. For example, drivers/vhost/vhost.c has a "pin, write to page, set page dirty, unpin" case. Add a fifth case, to help explain that there is a general pattern that requires pin_user_pages*() API calls. [jhubbard@nvidia.com: v2] Link: http://lkml.kernel.org/r/20200601052633.853874-2-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
All of the pin_user_pages*() API calls will cause pages to be dma-pinned. As such, they are all suitable for either DMA, RDMA, and/or Direct IO. The documentation should say so, but it was instead saying that three of the API calls were only suitable for Direct IO. This was discovered when a reviewer wondered why an API call that specifically recommended against Case 2 (DMA/RDMA) was being used in a DMA situation [1]. Fix this by simply deleting those claims. The gup.c comments already refer to the more extensive Documentation/core-api/pin_user_pages.rst, which does have the correct guidance. So let's just write it once, there. [1] https://lore.kernel.org/r/20200529074658.GM30374@kadamSigned-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Souptick Joarder <jrdr.linux@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200529084515.46259-1-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
This code was using get_user_pages*(), and all of the callers so far were in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/Signed-off-by: -
John Hubbard authored
Patch series "mm/gup: introduce pin_user_pages_locked(), use it in frame_vector.c", v2. This adds yet one more pin_user_pages*() variant, and uses that to convert mm/frame_vector.c. With this, along with maybe 20 or 30 other recent patches in various trees, we are close to having the relevant gup call sites converted--with the notable exception of the bio/block layer. This patch (of 2): Introduce pin_user_pages_locked(), which is nearly identical to get_user_pages_locked() except that it sets FOLL_PIN and rejects FOLL_GET. As with other pairs of get_user_pages*() and pin_user_pages() API calls, it's prudent to assert that FOLL_PIN is *not* set in the get_user_pages*() call, so add that as part of this. [jhubbard@nvidia.com: v2] Link: http://lkml.kernel.org/r/20200531234131.770697-2-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
Update case 3 so that it covers the use of mmu notifiers, for hardware that does, or does not have replayable page faults. Also, elaborate case 4 slightly, as it was quite cryptic. Signed-off-by:
-
Souptick Joarder authored
API __get_user_pages_fast() renamed to get_user_pages_fast_only() to align with pin_user_pages_fast_only(). As part of this we will get rid of write parameter. Instead caller will pass FOLL_WRITE to get_user_pages_fast_only(). This will not change any existing functionality of the API. All the callers are changed to pass FOLL_WRITE. Also introduce get_user_page_fast_only(), and use it in a few places that hard-code nr_pages to 1. Updated the documentation of the API. Signed-off-by:
-
Rafael Aquini authored
Users with SYS_ADMIN capability can add arbitrary taint flags to the running kernel by writing to /proc/sys/kernel/tainted or issuing the command 'sysctl -w kernel.tainted=...'. This interface, however, is open for any integer value and this might cause an invalid set of flags being committed to the tainted_mask bitset. This patch introduces a simple way for proc_taint() to ignore any eventual invalid bit coming from the user input before committing those bits to the kernel tainted_mask. Signed-off-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Link: http://lkml.kernel.org/r/20200512223946.888020-1-aquini@redhat.comSigned-off-by:
-
Guilherme G. Piccoli authored
Usually when the kernel reaches an oops condition, it's a point of no return; in case not enough debug information is available in the kernel splat, one of the last resorts would be to collect a kernel crash dump and analyze it. The problem with this approach is that in order to collect the dump, a panic is required (to kexec-load the crash kernel). When in an environment of multiple virtual machines, users may prefer to try living with the oops, at least until being able to properly shutdown their VMs / finish their important tasks. This patch implements a way to collect a bit more debug details when an oops event is reached, by printing all the CPUs backtraces through the usage of NMIs (on architectures that support that). The sysctl added (and documented) here was called "oops_all_cpu_backtrace", and when set will (as the name suggests) dump all CPUs backtraces. Far from ideal, this may be the last option though for users that for some reason cannot panic on oops. Most of times oopses are clear enough to indicate the kernel portion that must be investigated, but in virtual environments it's possible to observe hypervisor/KVM issues that could lead to oopses shown in other guests CPUs (like virtual APIC crashes). This patch hence aims to help debug such complex issues without resorting to kdump. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200327224116.21030-1-gpiccoli@canonical.comSigned-off-by:
-
Guilherme G. Piccoli authored
Commit 401c636a ("kernel/hung_task.c: show all hung tasks before panic") introduced a change in that we started to show all CPUs backtraces when a hung task is detected _and_ the sysctl/kernel parameter "hung_task_panic" is set. The idea is good, because usually when observing deadlocks (that may lead to hung tasks), the culprit is another task holding a lock and not necessarily the task detected as hung. The problem with this approach is that dumping backtraces is a slightly expensive task, specially printing that on console (and specially in many CPU machines, as servers commonly found nowadays). So, users that plan to collect a kdump to investigate the hung tasks and narrow down the deadlock definitely don't need the CPUs backtrace on dmesg/console, which will delay the panic and pollute the log (crash tool would easily grab all CPUs traces with 'bt -a' command). Also, there's the reciprocal scenario: some users may be interested in seeing the CPUs backtraces but not have the system panic when a hung task is detected. The current approach hence is almost as embedding a policy in the kernel, by forcing the CPUs backtraces' dump (only) on hung_task_panic. This patch decouples the panic event on hung task from the CPUs backtraces dump, by creating (and documenting) a new sysctl called "hung_task_all_cpu_backtrace", analog to the approach taken on soft/hard lockups, that have both a panic and an "all_cpu_backtrace" sysctl to allow individual control. The new mechanism for dumping the CPUs backtraces on hung task detection respects "hung_task_warnings" by not dumping the traces in case there's no warnings left. Signed-off-by:
-
Guilherme G. Piccoli authored
After a recent change introduced by Vlastimil's series [0], kernel is able now to handle sysctl parameters on kernel command line; also, the series introduced a simple infrastructure to convert legacy boot parameters (that duplicate sysctls) into sysctl aliases. This patch converts the watchdog parameters softlockup_panic and {hard,soft}lockup_all_cpu_backtrace to use the new alias infrastructure. It fixes the documentation too, since the alias only accepts values 0 or 1, not the full range of integers. We also took the opportunity here to improve the documentation of the previously converted hung_task_panic (see the patch series [0]) and put the alias table in alphabetical order. [0] http://lkml.kernel.org/r/20200427180433.7029-1-vbabka@suse.czSigned-off-by:Vlastimil Babka <vbabka@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Link: http://lkml.kernel.org/r/20200507214624.21911-1-gpiccoli@canonical.comSigned-off-by:
-
Vlastimil Babka authored
Testing is done by a new parameter debug.test_sysctl.boot_int which defaults to 0 and it's expected that the tester passes a boot parameter that sets it to 1. The test checks if it's set to 1. To distinguish true failure from parameter not being set, the test checks /proc/cmdline for the expected parameter, and whether test_sysctl is built-in and not a module. [vbabka@suse.cz: skip the new test if boot_int sysctl is not present] Link: http://lkml.kernel.org/r/305af605-1e60-cf84-fada-6ce1ca37c102@suse.czSigned-off-by:
-
Vlastimil Babka authored
The testing script recommends CONFIG_TEST_SYSCTL=y, but actually only works with CONFIG_TEST_SYSCTL=m. Testing of sysctl setting via boot param however requires the test to be built-in, so make sure the test script supports it. Signed-off-by:
-
Vlastimil Babka authored
We can now handle sysctl parameters on kernel command line and have infrastructure to convert legacy command line options that duplicate sysctl to become a sysctl alias. This patch converts the hung_task_panic parameter. Note that the sysctl handler is more strict and allows only 0 and 1, while the legacy parameter allowed any non-zero value. But there is little reason anyone would not be using 1. Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: David Rientjes <rientjes@google.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Guilherme G . Piccoli" <gpiccoli@canonical.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200427180433.7029-4-vbabka@suse.czSigned-off-by:
-
Vlastimil Babka authored
We can now handle sysctl parameters on kernel command line, but historically some parameters introduced their own command line equivalent, which we don't want to remove for compatibility reasons. We can, however, convert them to the generic infrastructure with a table translating the legacy command line parameters to their sysctl names, and removing the one-off param handlers. This patch adds the support and makes the first conversion to demonstrate it, on the (deprecated) numa_zonelist_order parameter. Signed-off-by:
-
Vlastimil Babka authored
Patch series "support setting sysctl parameters from kernel command line", v3. This series adds support for something that seems like many people always wanted but nobody added it yet, so here's the ability to set sysctl parameters via kernel command line options in the form of sysctl.vm.something=1 The important part is Patch 1. The second, not so important part is an attempt to clean up legacy one-off parameters that do the same thing as a sysctl. I don't want to remove them completely for compatibility reasons, but with generic sysctl support the idea is to remove the one-off param handlers and treat the parameters as aliases for the sysctl variants. I have identified several parameters that mention sysctl counterparts in Documentation/admin-guide/kernel-parameters.txt but there might be more. The conversion also has varying level of success: - numa_zonelist_order is converted in Patch 2 together with adding the necessary infrastructure. It's easy as it doesn't really do anything but warn on deprecated value these days. - hung_task_panic is converted in Patch 3, but there's a downside that now it only accepts 0 and 1, while previously it was any integer value - nmi_watchdog maps to two sysctls nmi_watchdog and hardlockup_panic, so there's no straighforward conversion possible - traceoff_on_warning is a flag without value and it would be required to handle that somehow in the conversion infractructure, which seems pointless for a single flag This patch (of 5): A recently proposed patch to add vm_swappiness command line parameter in addition to existing sysctl [1] made me wonder why we don't have a general support for passing sysctl parameters via command line. Googling found only somebody else wondering the same [2], but I haven't found any prior discussion with reasons why not to do this. Settings the vm_swappiness issue aside (the underlying issue might be solved in a different way), quick search of kernel-parameters.txt shows there are already some that exist as both sysctl and kernel parameter - hung_task_panic, nmi_watchdog, numa_zonelist_order, traceoff_on_warning. A general mechanism would remove the need to add more of those one-offs and might be handy in situations where configuration by e.g. /etc/sysctl.d/ is impractical. Hence, this patch adds a new parse_args() pass that looks for parameters prefixed by 'sysctl.' and tries to interpret them as writes to the corresponding sys/ files using an temporary in-kernel procfs mount. This mechanism was suggested by Eric W. Biederman [3], as it handles all dynamically registered sysctl tables, even though we don't handle modular sysctls. Errors due to e.g. invalid parameter name or value are reported in the kernel log. The processing is hooked right before the init process is loaded, as some handlers might be more complicated than simple setters and might need some subsystems to be initialized. At the moment the init process can be started and eventually execute a process writing to /proc/sys/ then it should be also fine to do that from the kernel. Sysctls registered later on module load time are not set by this mechanism - it's expected that in such scenarios, setting sysctl values from userspace is practical enough. [1] https://lore.kernel.org/r/BL0PR02MB560167492CA4094C91589930E9FC0@BL0PR02MB5601.namprd02.prod.outlook.com/ [2] https://unix.stackexchange.com/questions/558802/how-to-set-sysctl-using-kernel-command-line-parameter [3] https://lore.kernel.org/r/87bloj2skm.fsf@x220.int.ebiederm.org/Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
-
Manfred Spraul authored
__xa_store() and xa_store() document that the functions can fail, and that the return code can be an xa_err() encoded error code. xa_store_bh() and xa_store_irq() do not document that the functions can fail and that they can also return xa_err() encoded error codes. Thus: Update the documentation. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Rafael Aquini authored
Analogously to the introduction of panic_on_warn, this patch introduces a kernel option named panic_on_taint in order to provide a simple and generic way to stop execution and catch a coredump when the kernel gets tainted by any given flag. This is useful for debugging sessions as it avoids having to rebuild the kernel to explicitly add calls to panic() into the code sites that introduce the taint flags of interest. For instance, if one is interested in proceeding with a post-mortem analysis at the point a given code path is hitting a bad page (i.e. unaccount_page_cache_page(), or slab_bug()), a coredump can be collected by rebooting the kernel with 'panic_on_taint=0x20' amended to the command line. Another, perhaps less frequent, use for this option would be as a means for assuring a security policy case where only a subset of taints, or no single taint (in paranoid mode), is allowed for the running system. The optional switch 'nousertaint' is handy in this particular scenario, as it will avoid userspace induced crashes by writes to sysctl interface /proc/sys/kernel/tainted causing false positive hits for such policies. [akpm@linux-foundation.org: tweak kernel-parameters.txt wording] Suggested-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Orson Zhai authored
Instead of enabling dynamic debug globally with CONFIG_DYNAMIC_DEBUG, CONFIG_DYNAMIC_DEBUG_CORE will only enable core function of dynamic debug. With the DYNAMIC_DEBUG_MODULE defined for any modules, dynamic debug will be tied to them. This is useful for people who only want to enable dynamic debug for kernel modules without worrying about kernel image size and memory consumption is increasing too much. [orson.zhai@unisoc.com: v2] Link: http://lkml.kernel.org/r/1587408228-10861-1-git-send-email-orson.unisoc@gmail.comSigned-off-by:
Orson Zhai <orson.zhai@unisoc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Petr Mladek <pmladek@suse.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: http://lkml.kernel.org/r/1586521984-5890-1-git-send-email-orson.unisoc@gmail.comSigned-off-by:
-
Giuseppe Scrivano authored
the reason is to avoid a delay caused by the synchronize_rcu() call in kern_umount() when the mqueue mount is freed. the code: #define _GNU_SOURCE #include <sched.h> #include <error.h> #include <errno.h> #include <stdlib.h> int main() { int i; for (i = 0; i < 1000; i++) if (unshare(CLONE_NEWIPC) < 0) error(EXIT_FAILURE, errno, "unshare"); } goes from Command being timed: "./ipc-namespace" User time (seconds): 0.00 System time (seconds): 0.06 Percent of CPU this job got: 0% Elapsed (wall clock) time (h:mm:ss or m:ss): 0:08.05 to Command being timed: "./ipc-namespace" User time (seconds): 0.00 System time (seconds): 0.02 Percent of CPU this job got: 96% Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.03 Signed-off-by:Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Reviewed-by:
Waiman Long <longman@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Link: http://lkml.kernel.org/r/20200225145419.527994-1-gscrivan@redhat.comSigned-off-by:
-
Jules Irenge authored
Sparse reports a warning at freeque() warning: context imbalance in freeque() - unexpected unlock The root cause is the missing annotation at freeque() Add the missing __releases(RCU) annotation Add the missing __releases(&msq->q_perm) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
SeongJae Park authored
'Idle page tracking' users can pass random pfn that might be mapped to an offline page. To avoid accessing such pages, this commit modifies the 'page_idle_get_page()' to use 'pfn_to_online_page()' instead of 'pfn_valid()' and 'pfn_to_page()' combination, so that the pfn mapped to an offline page can be skipped. Reported-by:
SeongJae Park <sjpark@amazon.de> Signed-off-by:
-
- 07 Jun, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here is the set of driver core patches for 5.8-rc1. Not all that huge this release, just a number of small fixes and updates: - software node fixes - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not when it is removed from memory (which could come much later) - device link additions and fixes based on testing on more devices - firmware core cleanups - other minor changes, full details in the shortlog All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: Update device link status correctly for SYNC_STATE_ONLY links firmware_loader: change enum fw_opt to u32 software node: implement software_node_unregister() kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs driver core: Remove unnecessary is_fwnode_dev variable in device_add() drivers property: When no children in primary, try secondary driver core: platform: Fix spelling errors in platform.c driver core: Remove check in driver_deferred_probe_force_trigger() of: platform: Batch fwnode parsing when adding all top level devices driver core: fw_devlink: Add support for batching fwnode parsing driver core: Look for waiting consumers only for a fwnode's primary device driver core: Move code to the right part of the file Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default"" drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish firmware_loader: move fw_fallback_config to a private kernel symbol namespace driver core: Add missing '\n' in log messages driver/base/soc: Use kobj_to_dev() API Add documentation on meaning of -EPROBE_DEFER driver core: platform: remove redundant assignment to variable ret debugfs: Use the correct style for SPDX License Identifier ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits) staging: rtl8723bs: Use common packet header constants staging: sm750fb: Add names to proc_setBLANK args staging: most: usb: init return value in default path of switch/case expression staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason staging: vchiq: move vchiq_release_message() into vchiq staging: vchi: Get rid of C++ guards staging: vchi: Get rid of not implemented function declarations staging: vchi: Get rid of vchiq_status_to_vchi() staging: vchi: Get rid of vchi_service_set_option() staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message() staging: vchiq: Move copy callback handling into vchiq staging: vchi: Get rid of vchi_queue_user_message() staging: vchi: Get rid of vchi_service_destroy() staging: most: usb: use function sysfs_streq staging: most: usb: add missing put_device calls staging: most: usb: use correct error codes staging: most: usb: replace code to calculate array index staging: most: usb: don't use error path to exit function on success staging: most: usb: move allocation of URB out of critical section staging: most: usb: return 0 instead of variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the tty and serial driver updates for 5.8-rc1 Nothing huge at all, just a lot of little serial driver fixes, updates for new devices and features, and other small things. Full details are in the shortlog. All of these have been in linux-next with no issues for a while" * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits) tty: serial: qcom_geni_serial: Add 51.2MHz frequency support tty: serial: imx: clear Ageing Timer Interrupt in handler serial: 8250_fintek: Add F81966 Support sc16is7xx: Add flag to activate IrDA mode dt-bindings: sc16is7xx: Add flag to activate IrDA mode serial: 8250: Support rs485 bus termination GPIO serial: 8520_port: Fix function param documentation dt-bindings: serial: Add binding for rs485 bus termination GPIO vt: keyboard: avoid signed integer overflow in k_ascii serial: 8250: Enable 16550A variants by default on non-x86 tty: hvc_console, fix crashes on parallel open/close serial: imx: Initialize lock for non-registered console sc16is7xx: Read the LSR register for basic device presence check sc16is7xx: Allow sharing the IRQ line sc16is7xx: Use threaded IRQ sc16is7xx: Always use falling edge IRQ tty: n_gsm: Fix bogus i++ in gsm_data_kick tty: n_gsm: Remove unnecessary test in gsm_print_packet() serial: stm32: add no_console_suspend support tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
-
- 06 Jun, 2020 6 commits
-
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Fix for arch/sh build regression with newer binutils, removal of SH5, fixes for module exports, and misc cleanup" * tag 'sh-for-5.8' of git://git.libc.org/linux-sh: sh: remove sh5 support sh: add missing EXPORT_SYMBOL() for __delay sh: Convert ins[bwl]/outs[bwl] macros to inline functions sh: Convert iounmap() macros to inline functions sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx sh: configs: Cleanup old Kconfig IO scheduler options arch/sh: vmlinux.scr sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig sh: sh4a: Bring back tmu3_device early device
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kconfig updates from Masahiro Yamada: - allow only 'config', 'comment', 'if' statements inside 'choice' since the other statements are not sensible inside 'choice' and should be grammatical error - support LMC_KEEP env variable for 'make local{yes,mod}config' to preserve some CONFIG options - deprecate 'make kvmconfig' and 'make xenconfig' in favor of 'make kvm_guest.config' and 'make xen.config' - code cleanups * tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands streamline_config.pl: add LMC_KEEP to preserve some kconfigs kconfig: allow only 'config', 'comment', and 'if' inside 'choice' kconfig: tests: remove randconfig test for choice in choice kconfig: do not assign a variable in the return statement kconfig: do not use OR-assignment for zero-cleared structure -
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping helpers from Christoph Hellwig: "These were in a separate stable branch so that various media and drm trees could pull the in for bug fixes, but looking at linux-next that hasn't actually happened yet. Still sending the APIs to you in the hope that these bug fixes get picked up for 5.8 in one way or another. Summary: - add DMA mapping helpers for struct sg_table (Marek Szyprowski)" * tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping: iommu: add generic helper for mapping sgtable objects scatterlist: add generic wrappers for iterating over sgtable objects dma-mapping: add generic helpers for mapping sgtable objects
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping updates from Christoph Hellwig: - enhance the dma pool to allow atomic allocation on x86 with AMD SEV (David Rientjes) - two small cleanups (Jason Yan and Peter Collingbourne) * tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping: dma-contiguous: fix comment for dma_release_from_contiguous dma-pool: scale the default DMA coherent pool size with memory capacity x86/mm: unencrypted non-blocking DMA allocations use coherent pools dma-pool: add pool sizes to debugfs dma-direct: atomic allocations must come from atomic coherent pools dma-pool: dynamically expanding atomic pools dma-pool: add additional coherent pools to map to gfp mask dma-remap: separate DMA atomic pools from direct remap code dma-debug: make __dma_entry_alloc_check_leak() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware/dmi: Report DMI Bios & EC firmware release
-
